Disk Utility won't burn with external dvd burner!!! HELP?!?!?!

Hello anyone/everyone!
I need some help, I'm trying to burn a file using the disk utility. Only thing is that the disk utility wants to used the drive installed on my iBook (combo drive) and not my external DVD drive! I couldn't find a way to be able to chnage the default burner, and I was hoping that someone/anyone could help me out? The file is too large for a regular 800mb disk so I have to use the external dvd burner. Help me please oh wise-ones?!
iBook G4 Mac OS X (10.3.9)

Find out if the external burner is Patchburn compatible. If it is, then apply it from http://www.patchburn.de/
If not, I'd sell the external burner and get one that is compatible like those from http://www.macsales.com/
You may find other tricks on http://www.xlr8yourmac.com/ as well.

Similar Messages

Disk Utility won't format/partition external HD

I was just using this HD earlier tonight because it had a VMware image on it that I use. (Drive previously formatted under Tiger's disk utility) Well, I decided I wanted to repartition it so I could have a LeopardInstallDVD partition and a partition for my VMware images. When I tried to repartition the HD in Disk Utility, it just kinda froze and I just got the spinning beach ball, so I had to Force Quit. I tried it again; same result. I tried to restart the computer, but it froze, so I had to hard boot it. Upon restart, I was greeted with a message that one of the disks was not recognized by the OS. Guess which one? Yep, not only did it no longer show up in Disk Utility, but now the other external drive I was using for my Time Machine backups was no longer showing either. I turned off that hard drive and turned it back on and luckily it mounted and all my backups seem to be intact. However, I still couldn't get the other one to show up. So, I unhooked it and attached it to a windows machine and it showed up as "uninitialized disk". I was able to initialize it and reformat it as NTFS. I then unhooked it, plugged it back into my Mac and it recognized it as a NTFS drive with one volume called "new volume." I again tried to partition it and all I get is the spinning beach ball and I have to force quit. I can't even do an "erase" on the drive; I just get the spinning beach ball. What is going on here? Did Leopard corrupt my drive somehow?
Edit: I just hooked up the drive to my windows machine AGAIN and formatted it as NTFS and I copied some files to it to make sure it works. Then I hooked it back to my Mac and it recognized the drive and one volume called "new volume" and it automatically mounted. I can see the files that I copied to the drive. The drive still works, but apparently only under Windows now. Why can't I partition the drive with disk utility?

Well, since it's an 80GB drive, XP wouldn't let me format it as anything other than NTFS, so I had to create smaller partitions in order to use Fat32. I created a 10GB fat32 and a 30GB fat32 and left the rest unallocated. I connected it back to my mac and it recognized both partitions in disk utility and it let me erase the 10 GB and format it as HFS+. However, I wanted to make it a GUID partition and I don't know how to do this besides repartitioning the disk. I clicked on the hard drive itself, clicked partition, created 1 partition to test (using the whole 76GB), and all I get is the spinning beach ball. I don't get it.

DVD Studio Pro 4 USE WITH EXTERNAL DVD BURNER??

Hello
Looking at buying DVD Studio Pro 4 for my mini but apple have just stated it will not install unless my machine has a superdrive. We've got an external firewire DVD burner and i've read mention of other versions of DVD Studio burning through externals so how come we carnt use DVD Studio Pro 4 with an external DVD burner?
Has anyone tried an external DVD burner with DVD Studio Pro 4 ?
Cheers

This issue isn't external drives, it's the mini, and installing the program.
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
The specs do not seem to require an internal superdrive.

Disk Utility: How do I add a DVD burner?

I'm trying to burn a DVD by using Disk Utility. I'm having trouble with the DVD Pioneer drive in my G4. I'd like instead, to use my external firewire LaCie DVD burner.
How do I add this LaCie DVD burner to the drive options in the burn window of Disk Utilities?
Thanks

Take a look at http://www.patchburn.de/.
It worked for me on a older iMac G3 using a LaCie 300763U Firewire DVD-RW, with no internal DVD player/burner.
Also, this UserOpPatch (http://xvi.rpc1.org/playerpatch.html) allowed me to use DVD Player on my external DVD drive in a Tiger installation. Don't know if it'll work in Panther.
This mascosxhint did work:
http://www.macosxhints.com/article.php?story=20040330171655882&query=DVD+Player

Disk utility won't restore to external hard drive.

I recently installed Leopard on my Imac G5. I tried to "restore" the HD to a USB external hard drive. It said it would take 15 hours and when I came back - the time machine window was up and had a failure message as did the disk utility for the restore. Does the time machine need to be turned off to successfully restore the HD to an external hard drive?

Also worth noting that, if your drive has a FireWire interface, use that instead of USB. While the theoretical max speed of USB2 is faster than FireWire 400, in real-world conditions FW will blow the socks off USB. And if you're purchasing an external drive, it repays on the long run to pay a little more to purchase one with FW. And, of course, if FW400 is faster, FW800 is out of sight.

Hi! Missing disk utility apps and problems with external disc

Hi everybody! after installing snow leopard, as a way to get to lion, I dont have the disk utility apps.
Besides Im having a lot of problems with an external new Toshiba 1T disc that I try to use with Time machine cause I daily receive the OSX msg CANT REPAIR THE DISK REFORMAT IT!
Thanks a lot to all of the community
I do love Apple product. And counting the days for the iOS 6 upgrade!!

hugorodri wrote:
Hi everybody! after installing snow leopard, as a way to get to lion, I dont have the disk utility apps...
Before you go to Lion, just a reminder. I know you recently moved up to Snow Leopard. Be sure that everything you were running in Leopard, and now in SL, will work for you in Lion.
Remember, Rosetta and all PPC apps are gone (Word 2004, some versions of PhotoShop etc) Check the compatibility list before you ditch SL.
As far as your Disk Utility problem, how hard is it to reinstall SL?
I've taken a screen shot of my Utilities folder to show you what you are looking for. The Utilities folder as mentioned above is in the Aplication Folder (or you may have pulled it out to the side bar as well, in which case there will be an icon and the word Utilities in Places in the side bar.
Mrs H

Disk Utility and DiskWarrior trouble with external hard-drive.

I got an external hard-drive that doesn't show up on finder. On both Disk Utility and DiskWarrior it keeps mounting and unmounting. Disk Utility when trying to repair, spits this out when it unmounts...
2011-07-28 22:43:43 -0700: Problems were encountered during repair of the partition map
2011-07-28 22:43:43 -0700: Error: Some information was unavailable during an internal lookup.
2011-07-28 22:43:43 -0700: : Some information was unavailable during an internal lookup.
2011-07-28 22:43:43 -0700: [DUDiskController mountDisk] expecting DUDisk, but got nil
On DiskWarrior it simply says 'Directory cannot be rebuilt due to disk hardware failure (-36,2747)
Earlier today it would stay mounted and Disk Utility would spit out...
Verify and Repair volume “Back-up Hard Drive”
Checking file systemChecking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Invalid sibling link
Rebuilding catalog B-tree.
Invalid node structure
The volume Back-up Hard Drive could not be repaired.
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
while DiskWarrior would try to fix it, but on
Step 5: Locating directory date...
Speed reduced by disk malfunction: 339,474, er make that 340,239, er make that 341,327
and I finally gave up there.
I try to fix the Invalid sibling link error via Terminal and I get this...
imac-2:~ Migrated$ fsck_hfs -r /dev/disk2s2
** /dev/rdisk2s2 (NO WRITE)
Can't open /dev/rdisk2s2: Resource busy
Is there ANY THING I can do to get it to stay mounted and possibly fix this? This is my back-up hard-drive!!

It's the cord that's being used that decides if it shows up, or if it shows up and then goes away over and over. Using a cord where it stays on in the programs, when I run Disk Utility of the darked out part of the hard-drive, it spits out...
Verifying and repairing partition map for “MICRONET”
Checking prerequisites
Checking the partition list
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Updating Windows boot.ini files as required
The partition map appears to be OK
while the part of the disk just below it that's light spits out
Verifying volume “Back-up Hard Drive”
Checking file system
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Back-up Hard Drive”
Starting repair tool:
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Disk Utility stopped repairing “Back-up Hard Drive”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
while DiskWarrior tries to rebuild it and spits out a memory error.

Disk Utility is completely worthless with external drives

I've tried two different drives now on both Leopard and Tiger. Any time I try to do anything at all with the drive it beach balls and I have to force quit Dick Util. I just want to format/partition one of my hard drives -- something I've done hundreds of times successfully in my life. This is ridiculously frustrating. I've read that the "input/output" error is a bug in Leopard. Extremely disappointing. How can something as fundamental as formatting/partitioning be left unfixed? My wife has an iBook with Tiger and I get the same beach ball.
This is really ******* me off. How can I partition my drive(s)? All I have access to is OS X (Tiger and Leopard). Normally this is a good thing, but not today.

Thanks for the help. I'm not sure what the name of the volume is, though. I put in the "Media name" from Disk Utility.
Here's what the terminal spit out:
$ diskutil repairDisk /Volumes/"WDC WD12 00JB-00EVA0 Media"
Disk Utility Tool
Usage: diskutil verifyVolume MountPoint|DiskIdentifier|DeviceNode
diskutil verifyDisk MountPoint|DiskIdentifier|DeviceNode
diskutil repairVolume MountPoint|DiskIdentifier|DeviceNode
diskutil repairDisk MountPoint|DiskIdentifier|DeviceNode
Verify or repair the file system data structure of a volume.
Ownership of the affected disk is required.
VerifyDisk and repairDisk are allowed but deprecated synonyms for
verifyVolume and repairVolume, respectively.
Example: diskutil verifyVolume /Volumes/SomeDisk

Disk Utility won't run with Snow Leopard

I updated to Snow Leopard 10.6.2 and now when I run Disk Utility.app it says that it is version 11.1 and will not run. I'm not sure why this app didn't update at the same time. Where can I download 11.5 Disk Utility?
Thanks!

make sure you are running the correct copy of DU. you likely have two copies and are trying to run the one which is not in the default location. in finder go to main hard drive->applications->utilities. start DU from there. if that's not it pull DU from the SL install DVD using Pacifist http://www.charlessoft.com/

Disk Utility won't let me select "Repair" button - help!

I'm trying to upgrade from 10.3.9 to 10.4. When I run Installation, it fails and gives me a message that I need to repair my hard drive. So I restarted from the DVD, selected Disk Utility, clicked on my hard drive and was able to click on Verify. When it got done, it said the disk needed repairs. But the Repair button is grayed out. Any suggestions on either the trouble with the install or why I can't select Repair?
Thanks.

Usually, being able to select the internal HD and click on Verify but not Repair indicates one is actually booted up from the internal HD rather than the optical drive. Which drive is shown at the top of the Disk Utility list on the left?
What 10.4 version (e.g., 10.4.8) is shown on your retail black label Tiger 10.4 Install disc?
You can also try repairing the drive using the file system check fsck utility in single user mode, as described in Using Disk Utility and fsck.
When making disk repairs, repeat the repair until the utility reports no problems found or until it reports being unable to make further repairs. It's possible for one disk directory problem to mask another.

External DVD burner to burn iDVD projects

I purchased an iMac about six months ago to replace an older Mac that I've had for about 10 years. I made the mistake of not getting a Super Drive when I made the purchase. I have spent some time learning about and creating iDVD projects but, of course, can only play them on my iMac and am unable to burn them to a DVD disk. Can I purchase an external DVD burner that will allow me burn my iDVD projects and, if so, can anyone suggest a reliable product?
Thanks.

Use an ext. Lacie FW Burner or make your own like i did from a pioneer 110D and a standard FW400 enclosure. Pioneer 111 and 112 will also work. Nice thing about making you own is that it requires no additional FW drivers.
http://discussions.apple.com/thread.jspa?messageID=5153595&#5153595
http://discussions.apple.com/message.jspa?messageID=5177208#5177208

Using an external DVD burner with iBook G4

Hi,
I am new to this ibook game so bear with me....I purchased an iBook G4 from ebay and hooked my Lacie external DVD burner up to it as it only has a combo drive. Anytime I try to burn DVDs though it says that it cannot use this disk. When I look in disc utility it says that the write ability of any DVD i insert is read only. Under system profiler my external burner does appear as drive type CD-RW/DVD-RW though. What can I do to burn DVDs? I am running osx 10.3.7 by the way and previously used my external burner with an old emac succesfully.

You could try and see if the external optical drive is supported through
third-party burn software, one example of which may be Burn, it is free.
http://burn-osx.sourceforge.net/Pages/English/home.html
{note: there are two links to download - one is for G3s only}
Is the cable you have in good health and do you have a known good spare?
And update the OS X to 10.3.9. Get the large file 'combo' for this;
and then check for security updates, java updates, etc. Be sure
to run Disk Utility's 'repair disk permissions' before & after updates.
You will have to update the Panther 10.3.x system to 10.3.9 and also
get any other updates available to the system. This may be why the
external drive won't work in the present computer. Also, Burn needs
to have 10.3.9 or later in order to work, too...
Hopefully this helps...
Good luck & happy computing!

Problems ripping with an external DVD Burner

Hello Everyone,
Recently I purchased a Liteon External DVD Burner off of newegg (http://www.newegg.com/Product/Product.asp?Item=N82E16827106011) -- It's a Liteon SHW-1635SX -- I bought this because the DVD-ROM drive thats in my tower natively is REALLY slow and I wanted to get a new one that I could use with a laptop that I`m going to purchase in the future. Whenever I try to rip a CD into iTunes using the burner, It says that it's ripping the disk, however it doesn't spin up the cd and it takes about 2 seconds to "rip" all the songs. I know this drive is soposed to be faster than my old one, But two seconds is a little TOO fast. Plus, I know that it's not copying the songs because when I try to listen to them in my library, the song won't play. (Under time it says "789:54..." for all the songs on the cd, in my library) However, the burner rips perfectly in Windows Media Player... Is this perhaps some kind of glitch with iTunes??? Basicly, the only way I can rip a CD into iTunes is to use my old DVDROM drive, but that defeats the purpose... below is the CD Diagnostic log that I got from iTunes::::::::
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
HP Pavilion 05 P9859A-ABA 533w
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.21.0), DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1), PFC (2.5.0.196),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL Graphics Controller\Intel(R) 82845G/GL Graphics Controller
IDE\DiskMaxtor4R060J0_________________________RAMB1TU0, Bus Type ATA, Bus Address [0,0]
IDE\DiskST34323A_______________________________3.02___, Bus Type ATA, Bus Address [1,0]
IDE\CdRomCOMBIRW16x10/DVD_______________________H1.0___, Bus Type ATA, Bus Address [0,0]
USBSTOR\CdRomLITE-ONDVDRW_SHW-1635SYS0Y, Bus Type USB
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
Current user is administrator.
E: COMBI RW16x10/DVD, Rev H1.0
Drive is empty.
F: LITE-ON DVDRW SHW-1635S, Rev YS0Y
Audio CD in drive.
Found 9 songs on CD, playing time 42:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:30:07
Track 3, start time 08:44:33
Track 4, start time 12:03:74
Track 5, start time 17:55:53
Track 6, start time 22:14:31
Track 7, start time 25:32:60
Track 8, start time 30:13:01
Track 9, start time 35:59:06
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: COMBI RW16x10/DVD on -128(0xffffff80) media at speed 0X.
Your replies are greatly appretiated!
--Aric--

hi Aric!
hmmm. we'd better check on the usual suspects with that. (the incredibly long song times can also be associated with these sorts of causes.)
You can't import or play music from an audio CD in iTunes for Windows
... and the following resources might be helpful with that. (check on firmware and drivers even though it's a brand new unit.)
Using CD Diagnostics in iTunes for Windows to troubleshoot CD/DVD drive issues
iTunes for Windows: Updating the firmware on your CD or DVD drive
Updating the drivers on your Windows PC
Where to find firmware for your CD/DVD drive
love, b

Desktop or Disk Utility won't show External Hard Drives

The Desktop or Disk Utility won't show 2 of my old external hard drives and so they are currently unsusable. My computer however recognise other external drives.
320GB Western Digital MyBook Premium model number: WD3200D032-000
500 GB Western Digital MyBook Premium model number: WD5000E032
I have same issues both of these external drives.
The blue circle lights come on so power is getting to it.
Tried 2 USB cables, one I know for sure is working - Nothing.
I am using Lion 10.7.4 on a mid 2009 13" MacBook Pro
All efforts to help much appreciated

No they haven't worked on this computer before. I using them on my old MacBook Pro (a computer which is no longer working) which ran Snow Leopard.
The 500GB drive "stopped working" with that old MBP too
But the 320GB drive was always working with old MBP if I remember correctly.
Cheers

Adobe Elements catalog backup fails after 3 discs. Message says something wrong with dvd writer. I bought an external dvd burner and changed disc brands, still the same results.

Full backup of catalog stops after three discs. I have changed disc brand and added a new external dvd burner but still get the same results. What is wrong?

If you have the hard drive space, see if you can complete a back up to the hard drive instead. If that works successfully, it could be a buffer or caching issue with the burner. It could be running out of space because it is not clearing after each disk burn.

Disk Utility won't burn with external dvd burner!!! HELP?!?!?!

Similar Messages

Maybe you are looking for