Disk Volume cost for MaxDB 7.6 and 7.8

Hello, everyone
I heared that MaxDB 7.8 uses UTF-8 to save characters while 7.6 uses UTF-16. Therefore I made a comparasion to prove this.
To be disappointed, the result did not support it. The experiment procedures were as follows:
1. Create a DB with same disk volume size(30MB) and log volume size(20MB) and default char code as Unicode.
2. Create a table with only one column of varchar(200) unicode.
3. Insert 6000 lines of records to this table.
4. See the data area of percentage filled.
5. It showed that the two were nearly same and  7.6 was even less than 7.8.
So, I have the following questions:
1. Does Maxdb 7.8 use UTF-8 to save characters?
2. What are the feature lists for MaxDB 7.6 and 7.8?
I was asked a sap service marketplace account to login. Is this kind of information so secret?
3. If Maxdb 7.8 uses UTF-8 , how to configure to use it?
Any reply will be highly appreciated!

Hi,
As per the Wiki link http://wiki.sdn.sap.com/wiki/display/MaxDB/FAQ, section:
Bigger development request (e.g Unicode UTF-8 or page compression) that would have required man-years of effort in SAP MaxDB, are either already available in SAP In-Memory Database or will be done there
So, seems UTF-8 is not yet there in MaxDB 7.8.
Additional features in MaxDB 7.8: http://maxdb.sap.com/training/expert_sessions/SAP_MaxDB_New_Features_in_Version_78.pdf
Regards,
Srikishan

Similar Messages

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • Disk volume settings for 6.5 on MS 2000 server

    We are upgrading Essbase from version 6.1 on an NT server to 6.5 on a MS 2000 server. When we initially built our old server, we partitioned the drives and stored the index on one disk volume and the data on another. I remember that at the time there was a reason (performance?) that we did this. When they built our new server, they did not partition the drive. Now both the index and data will be stored on the same volume. Does anyone know if this will cause issues with performance down the line when we move to production and have multiple users and mmultiple application running at the same time?ThanksBonnie

    It could, but it's difficult to say. I think that you would be best off with the data on separate disk arrays with separate array controllers. The next most optimal solution would be to have two logical partitions so that the OS can schedule disk operations to more luns. This is all just theory though, so it's really hard to know unless you have the luxury of testing different configurations.

  • How much does it cost for Apple to replace and fit a broken iPod Touch 4th Generation screen in-store?

    I don't want to pay over £25 ($32) and I live in the UK. I have seen some posts that people have had them replaced and fitted for free too.

    Anywhere from £82.44 for the 8 GB model to about twice that for the 64 GB.
    http://www.apple.com/support/ipod/service/prices/#uk
    ... I have seen some posts that people have had them replaced and fitted for free too.
    You would have to ask them.

  • How much it cost for 3gs 16gb motherboard and from where can i buy

    how much for iphone 3gs 16 gb mother board as it is dead now and nobody can repair it here in pakistan
    and please tell me how to factory unlock iphone  4g ios 4.2.1 locked on AT&T some company advertise that they can give password for it but most of them looks scam to me
    thans
    arsi

    Apple does not sell parts... you'll need to look elsewhere.
    All US sold iPhones (except CDMA models) are carrier locked to AT&T.
    Neither AT&T or Apple will unlock any US sold iPhone.
    If you really want it unlocked, you will need to look to other unofficial methods which cannot be discussed here.    

  • Lenovo Miix 2 8" - Separating volume controls for headphones and speakers

    The sound options for the Miix 2 out the box combine the volume control for internal speakers and for headphone jack, i.e. there is only one volume control for both the speakers and the headphones on the mixer settings at the the volume icon at the lower right hand of the desktop.  So when headphones are plugged in, there is still only a "speakers" control shown.
    I work in an office and would like to have the speakers muted if the headphones are pulled out.
    Similar issues resolved on other devices directed to install an alternate sound driver (that offered separate controls) or pointed to some other settings in the sound driver properties menus where this could be manually done, but I'm having trouble applying any of them to this device. 

    Worked beautifully! Thank you very much!!
    nyxacith wrote:
    Tried it reverting to an older version of Skype.  Didn't work.
    But!  I believe I may have found the solution.
    Here are the steps I took to solve the issue:
    1. Right click on the audio volume control icon -> Playback devices.  The Sound window and Playback tab should be open.
    2. Set Speakers/HP as both the Default Device and the Default Communications Device.
    3. Go to Skype>Tools>Audio Settings.  Set Speakers settings to: Speakers/HP (IDT High Audio Definition CODEC).
    Hopefully this will work for anyone else who has the same or a similar problem.

  • Planned cost for int labour and non stockable material not visible

    Hey gurus,
    While creating an order with a material, ext service, non stock material, I am able to see the planned cost for materials in stock and ext services procured. But i'm not able to see the planned cost for non stock material and int labour. However i'm able to see the actual cost for all the items. I think I have missed some config. Please help.
    Regards,
    Abhishek

    Hi,
    As said by Pithan there is a problem in costing variant for planned cost which you have assigned to prder type at plant level.
    Problem underlies within valuation variant assigned to costing variant.PM01 is your costing variant here.Check diiferent heads within valuation variant for this costing variant.There under activities tab what is calculation parameter you have selected.If it is blank you will not get any internal activity cost.You need to select at least one from dropdown like cost from previous period or avaerage cost etc.Then you will get planned cost for internal activities.SAmething applies to non stock material.
    Check in OKP6 for all these and make sure that you have selected at least one cost calculation schema there for activities and material and external.
    Regds,
    atul

  • I have no volume for incoming calls ,texts and emails how do i fix it

    I have no volume alert for incoming calls ,texts and emails  . How can I fix this as I can watch video clips wiyh sound

    Hello Strangers1,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning audio issues:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Learn more about troubleshooting iPhone hardware issues.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How to creat commitment for PO PR but not creat statistical cost for GR

    Hi,
    Quantities and Values in Valuated Project Stock: Example - Material - SAP Library
    Planning
    Material FIN-M is assigned to network activity V10 and is managed in the project stock for WBS element P/4711.1.
    The network type is flagged as appended and apportioned to the WBS.
    Before the first MRP planning run or before the planned orders are converted into purchase requisitions or production orders, the following amounts appear in WBS element P/4711.1:
    Planned costs of $500,00
    Remaining order plan value of $300,00
    The MRP controller begins by converting the planned orders. First, the planned order for the material RAW-M is converted into a purchase requisition and the planned order for the material SEMI-M is converted into production order A2.The order type is flagged as not appended and apportioned to the WBS.The remaining order plan value in the WBS element changes by the amount of the internal activities portion of production order A2 to $400,00 (300,00 + 100,00).After the purchase requisition is converted into a purchase order, a cost commitment of $50,00 also appears in WBS element P/4711.1.
    External Procurement
    Valuated goods are received for the purchase order, but the price is $10 different at $60. Assuming that material RAW-M is price-controlled, this gives rise to a debit posting of $60,00 in the stock account and credit posting of $60 in the GR/IR clearing account (Financial Accounting).If the inventory accounts was created as a cost element in CO, the following appear in WBS element P/4711.1:
    Statistical actual costs of $60,00 in the stock cost element
    A cost commitment of $0,00
    If material RAW-M is price-controlled the standard price is $50,00, the postings in Financial Accounting are: $50,00 debit to a stock account $10,00 debit to a price difference $60,00 credit to the GR/IR clearing account
    In this case, the only figure in the WBS element would be statistical actual costs of $50,00.
    Above excerpt from SAP help, may I know how to do configuration to creat commitment for PO PR but not creat statistical cost for GR?
    Thanks and regards,
    Ray

    Hello Jie,
    if i right assuming your query then PR->PO= Commitment should be created.
    but GRN by MIGO=Statistical cost should not create once MIGO if right then actual cost would be 0.
    you can activate commitment by OKKP transaction.
    And you want to cost should not be statistical after MIGO right?
    here solution is cost never statistical type until account assignment object not statistical type this is my assumption.
    if this is the issue then check G/L account from the PO. then check that G/L account, whether it is a B/S account or P&L account? I think you have wrongly assigned P&L account.
    Regards,
    Sanjeev

  • Lion Install does not work, says "This disk is used for Time Machine backups"

    I'm having trouble installing Lion onto my macbook pro intel core 2 duo. 
    I am backing up my computer with an external drive using TimeMachine, but i've disconnected it.  Also i'm running SL 10.6.8  
    I have a windows 7 partition that was created with boot camp.
    I've tried to make sure everything is all ready for lion but when I go to install lion it says "This disk is used for Time Machine backups" and the hard drive is grayed out.
    Same problem as this guy: https://discussions.apple.com/thread/3190321?start=0&tstart=0
    I'm hearing that a file called "Backups.backupdb" is on the top level of the hard drive, but I see no such file.  I've looked at the invisible files and I cant find it.
    I've also created a bootable flash copy of the lion install but that does not work It gives me the same message "This disk is used for time Machine backups".

    "Backups.backupdb" if the file in Time Machine.  As the discussion says, you have to find that file and trash it.  Try spotlight to locate it.  If that does not work, down load OmniDiskSweeper from the Internet (free) and go through an organized search to find "Backups.backupdb".  If that takes too long or is too tedious, then if you have everything backed up, erase the HDD and start from square one.
    Ciao.

  • Hard Disk Drive Connector for laptop

    i need a Hard Disk Drive Connector for the hard drive and caddy, the and part p/n:gs662ua#aba
    it a hp pavilian dvdv6500 thanks

    Hi:
    I would get one on eBay.  They have plenty of them...
    http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_sop=15&_nkw=dv6500+hard+drive+connector&rt=nc&LH_...

  • Volume limiter for ipod shuffle?

    Have been reading about Apple introducing a user-definable volume limiter for ipod nano's and fifth gen ipod's.
    Anyone know if this software is going to be made available for ipod shuffle's? (You could adjust the settings for it from within itunes)
    Toshiba laptop   Windows XP  

    I doubt it because the shuffle doesn't have a screen. You should send Apple your feedback if you really feel that you need to be heard!
    http://www.apple.com/feedback

  • How much would a repair for an unresponsive volume button cost for an iPad 3?

    The volume button for decreasing the volume as stopped working and has been unresponsive to restarting the my 3rd gen iPad, and doing a hard shut down. My AppleCare warranty for my device has expired and I would like to know how much a repair for this would cost. It should be noted that the button for increasing he volume still works but since the buttons are technically one button on the device my assumption is that both buttons would have to be replaced. If you could shed some light on whether I should repair my iPad or buy the iPad Air, (whichever one seems cheapest or most cost effective in the long run). Thank you for your time and an answer to my question would be gladly appreciated!

    http://www.apple.com/support/ipad/repair/other/ links to the Apple iPad repair page.  Out of warranty replacement of an iPad 3 is $299.00.  The device will be replaced, and the replacement will come with a 90 day warranty.
    HTH

  • ASO and storing data to multiple disk volume

    Hi,I use Essbase Administration Services 7.1 on Win2000.I use ASO type of OLAP application. I would like to set storage to disk D: (the default is C:). How to to set storage disk volume for ASO type of applications?For block storage type OLAP application is in the database Properties tag in Storage tab. What about ASO type of applications?Is it posible to store data two multiple disk volumes?Thanks,Grofaty

    It is a bit different for ASO models - you need to modify the tablespaces, which are found in the properties of the APPLICATION, not the database.In EAS right-click the app and choose Properties. Go to the Tablespaces tab and that should be what you are looking for.Regards,Jade---------------------------------Jade ColeSenior BI ConsultantClarity [email protected]

  • I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    I would like to install the newest version of Acrobat Adobe into 6 computers. I wonder what tha will cost, for a month and to buy it directly? On one computer we have version 9, and that one we would like to uppgrade to the latest version?

    Hi Linafrick,
    To install Acrobat 11 on to 6 computers you can purchase Volume License.
    But since you want it for only a month you need to purchase Acrobat subscription.
    A single subscription is good for 2 computers and the same Adobe ID cannot be used to buy multiple subscription copies of Acrobat.
    You can however opt for Creative Cloud for Team license such that you can become the Admin and grant access to the 6 users who wish to install Acrobat on their machines.
    Feel free to reach our customer service via chat to know more information: Creative Cloud membership support
    Regards,
    Rave

Maybe you are looking for