Disk volume settings for 6.5 on MS 2000 server

We are upgrading Essbase from version 6.1 on an NT server to 6.5 on a MS 2000 server. When we initially built our old server, we partitioned the drives and stored the index on one disk volume and the data on another. I remember that at the time there was a reason (performance?) that we did this. When they built our new server, they did not partition the drive. Now both the index and data will be stored on the same volume. Does anyone know if this will cause issues with performance down the line when we move to production and have multiple users and mmultiple application running at the same time?ThanksBonnie

It could, but it's difficult to say. I think that you would be best off with the data on separate disk arrays with separate array controllers. The next most optimal solution would be to have two logical partitions so that the OS can schedule disk operations to more luns. This is all just theory though, so it's really hard to know unless you have the luxury of testing different configurations.

Similar Messages

Disk Volume cost for MaxDB 7.6 and 7.8

Hello, everyone
I heared that MaxDB 7.8 uses UTF-8 to save characters while 7.6 uses UTF-16. Therefore I made a comparasion to prove this.
To be disappointed, the result did not support it. The experiment procedures were as follows:
1. Create a DB with same disk volume size(30MB) and log volume size(20MB) and default char code as Unicode.
2. Create a table with only one column of varchar(200) unicode.
3. Insert 6000 lines of records to this table.
4. See the data area of percentage filled.
5. It showed that the two were nearly same and 7.6 was even less than 7.8.
So, I have the following questions:
1. Does Maxdb 7.8 use UTF-8 to save characters?
2. What are the feature lists for MaxDB 7.6 and 7.8?
I was asked a sap service marketplace account to login. Is this kind of information so secret?
3. If Maxdb 7.8 uses UTF-8 , how to configure to use it?
Any reply will be highly appreciated!

Hi,
As per the Wiki link http://wiki.sdn.sap.com/wiki/display/MaxDB/FAQ, section:
Bigger development request (e.g Unicode UTF-8 or page compression) that would have required man-years of effort in SAP MaxDB, are either already available in SAP In-Memory Database or will be done there
So, seems UTF-8 is not yet there in MaxDB 7.8.
Additional features in MaxDB 7.8: http://maxdb.sap.com/training/expert_sessions/SAP_MaxDB_New_Features_in_Version_78.pdf
Regards,
Srikishan

Volume settings for my ipod

How do you adjust the volume for this ipod? I can't seem to adjust it. Please help.

Mary,
Adjust the volume from the Now Playing screen using the scroll wheel.
Cheers!
-Bryan

Configuring Settings for iPad users with OS X Server

Good afternoon!
i work for a government agency and we are fairly new to the Apple in the workplace environment. We have 25 total iPads and are trying to Manage them with OS X Server. What we are trying to acomplish is preventing the user from connecting the iPad to their own workstation. all backups and such are done over iCloud. There are other things we are trying to acomplish but this is the most confusing for me. any help would be appreciated.
Johnny Monroe
Bakersfield, CA

Just start with:
http://www.apple.com/ipad/business/it/management.html

Environment settings for a web-app in Application Server 6.0 SP3

Hi all,
I'm trying to pass java specific environment variables to a servlet in
IAS, but I fail to acces them by a System.getProperty(..).
I've seen that the Deployment Tool converts user-defined environment
properties
in <env-entry> tags (in web.xml) but <env-entry> puts stuff into the
JNDI context, not System.getProperty().
Is there a way to pass environment variables to servlet and acces them
by System.getProperty() ?
Thanks.
Jean-Marie.

Hi all,
I'm trying to pass java specific environment variables to a servlet in
IAS, but I fail to acces them by a System.getProperty(..).
I've seen that the Deployment Tool converts user-defined environment
properties
in <env-entry> tags (in web.xml) but <env-entry> puts stuff into the
JNDI context, not System.getProperty().
Is there a way to pass environment variables to servlet and acces them
by System.getProperty() ?
Thanks.
Jean-Marie.

Volume settings not retained

Hi guys,
I have been having a problem with my Mac Book from the start. According to what I have read on the Internet my Intel based Mac Book should retain volume settings separately for my headphones and my internal speakers.
Meaning that once I have changed the settings for the volumes it should set the correct volume if I connect my headphones or use my internal speakers. This does happen and work normally.
However after restarting my Mac Book volume settings are not retained and once I connect my headphones the volume is set to 56%. Similarly this happens for my internal speakers as well.
This also describes my problem http://forums.macosxhints.com/showthread.php?t=88936
Could someone help me out with this, I have already reset my PRAM and NVRAM
So the option described on this page does not work for me.
http://www.macworld.com/article/53791/2006/11/intelphonevol.html
Message was edited by: W.R.R. Farid

I have suffered this problem too.
Both pair of my headphones, one came with iPod, are loud enough at 6%.
56% is surely going to kill my ears.
I've been googling around and found no solution.
But this is not the most depressing thing.
Let's take a look at this
http://support.apple.com/kb/TA24586
*Last Modified: March 08, 2007*
Obviously Apple was aware of this problem two years ago. And the only solution is to "adjust the volume level and balance as desired after restarting the computer."
Waht the __?!
This is not even a real solution.
Why wounldn't OS X just remember custom volume settings for headphones?
When are you going to correct this issue any way?

Again "Error reading settings" for wiki on OS X Server 10.8

I tried everything I found on the web but still getting the "Error reading settings" for the Wiki of OS X Server for Mountain Lion.
The postgresql service is running and responding. But still I believe it's a postgres problem.
I tried the "remove Server.app -> remove /Library/server -> reinstall Server.app" but it doesn't change anything: wiki "Error reading settings".
Is there a way to reset the built-in postgresql of OS X Server? What about the hidden users (e.g. _postgres) - which of them are required for the
postgresql and how do I see if they all do well?
Any ideas?

I feel the exact same way ... i have read everything i can find on here and through Google ... tried it all. nothing has worked

11i patches for windows 2000 server

Can any one let me know about the patches that have been released for 11i installations on windows 2000 server.

We used ACS 3.2 with 200 server several months without problems (with regular security and system updates and ACS was working fine) few weeks ago we have upgraded (upgrade not fresh install) server to 2003 and ACS is still running OK - so I think you dont need affraid of security upgrades
M.
Hope that helps rate if it does

Best Settings for making a Secure, Reliable Disk Image?

Hi guys!
Can anybody direct me to the best settings that can be used to make a secure Disk image using the MacOS X disc utility?
I wish to make my computer family friendly, yet keep my proffessional and private files secure/private and innaccesible to children and unautorized individuals. I have heard that files saved inside encrypted images (password protected) are also not indexed in the finder wich is perfect for the privacy I seek (this is true right?).
I know how to access the tools, but the right settings for making a trustworthy image remain elusive. Already tried with some of the formats and information placed inside...started becoming glitchy and unreliable, even after removing the files and making them unencrypted again.I'm abaout to try with the HFS+ format.
I cannot lose the files I wish to protect. But I need to secure them and if anything, be capable of backing up the image by copying it into a HFS+ formated external hard drive every once in a while. Can this be done?
Is there a risk of data loss in the encryption process? One of my external drives (FAT 32) even started to make unrelated neighboring folders "disappear" after making an image inside ( I though I could make an image anywhere and save stuff securely at that point...but nearly losing the entire cashe of info made me backtrack and simply avoid the process until i'm sure of what I'm setting up---so many compatibility problems!)
• Don't know what settings to use.
• Some say there is a small chance of a disk image being damaged or corrupted (for no reason whatsoever)...but having trouble right off the bat, with a brand new image worries me. WHAT ARE THE RISKS? Is the system unrefined and unrealiable?
I plan to make the Image a sparse file,using the HMS+ format, 400GB....regular encryption. I plan to copy all my sensitive stuff inside and delete unprotected copies. Risky? Are images unreliable in general? or where my glitches abnormalities?---Can the images hold collections of files or do they become more unrealiable the bigger they get (what I fear). I don't wan't to have to make dozens of images to protect my files.
Can a external drive be formated to HMS+ and accept a drag and dropped copy of a 400GB image? FAT32 will just not accept it. Would there be risk of the image being damaged in the transfer? NOTE that copying the data into an external drive would be to have a secure backup of the data. If I can't trust the backup to be carbon copy intact...it isn't a backup.
Securing files is really proving to be bothersome, despite having "refined" tools at my disposal.
Thanks for your help!

Do you place your backups on external disks? Are your external disks formatted HFS+?
Can HFS+ Disk image be Drag dropped into a HFS+ formatted external disk in order to copy them? or is the process blocked like what happens to large Disk images in FAT 32?
I'm trying to lock on to the right format to apply to everything. My steps will be:
Make the image: So far a sparse image in HFS+ format, 400 GB, No partition map.
Drag sensitive work to Disk image. Once transfer in complete delete originals.
Format an external disk into the journaled HFS+ format. Drag drop Secure disk image to back it up.
Do you see any problems with this process? Anything i'm missing?

'Music' displays but won't play. Settings appear correct and iPhone is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

'Music' displays but won't play. Settings appear correct and iPhone (3G) is selected for output. Startup screen intermittently displays with the lower pause/play volume bar for no clear reason..... developed at the same time as play failure. Ideas????

Thank you for the replies.
Appearane of 'Music' functions (I>> > II <<I, plus volume slider) on the lock/log in screen (when first turning on the iPhone) thus far seems without pattern, i.e. regardless of which if any applications are up in the background, and indeed even when all have been quit.
All visual aspects of 'Music' appear normal after launch including the title scroll across the top in vertical mode. However, while pressing play (>) converts the play (>) icon to pause (II), selected song does not play and the elapsed time bar (upper end between the track count and the repeat/shuffle icons) remains stationary at 0:00 or at any point to which it is dragged. When using home sharing this same problem persists regardless of what output is selected.
Hope that may prompt a thought somewhere.

How do I allow access to non admin network users to disk volume?

I would like to allow access to a specific volume (disk) on one of our networked macs (Mac1) to all users. I've set user accounts on Mac 1 for all network users. These users are "regular" users, not admin. They can access this disk (and all others on Mac1) if I log in as Admin set Users to Admin. If I do this, then users have access to ALL data on all disks. If I do not, leaving them as "regular" users, when they log in they only see public folders. How can I allow access to the one disk volume without making network users admin? I tried changing various settings for the volume in Finder Info (everone else=read/write; ignore permissions) with no luck.
Thanks
iMac, ibooks, G5, Tibook Mac OS X (10.4.4)

Your observations are correct - by default, an "admin" user connecting over AFP can choose from available "volumes" (default) or "shares", whereas a non-admin user can only mount "shares".
By default, the only "shares" on an OS X client machine are the users' "Public" folders, and unlike pre-OS X Macs, it isn't easy to configure your own share points. Apple's official statement is that users wanting this functionality should buy OS X Server.
However, it is possible to create an arbitrary share point using 3rd party software called "SharePoints" (donationware). I have never used it, but it seems to be well regarded. Alternatively, you can do it manually following the instructions in this hint & comments (especially apw8's):
http://www.macosxhints.com/article.php?story=20011108161839416
Once the external drive (or folder on the external drive) is configured as a share point, it should be possible for non-admin users to select and mount it once they connect over AFP.

Adobe cloud to save automatically actions, stuff and settings for example?

Hi!
I had a hard-disk error and had to reinstall everything and with that I lost my photoshop actions...
Can't adobe cloud save automatically / sync this kind of stuff and personalize settings for example?
Thanks!
Francisco

Hi Francisco, here are the details around sync settings and items that can be synced as of now: Photoshop Help | Sync settings using Adobe Creative Cloud
Thanks,
Atul Saini

Error 1070023 Configured Disk volume does not exist.

Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..

So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

Hello,
We have requirement to modify Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
permissions is a cumbersome job. Hence, I am looking for a command line options.
I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
know the command hence, please do not re-direct me to scripting forum)
Manually through GUI, I am setting following.. snaps are given below
Thanks !

You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !

Disk volume settings for 6.5 on MS 2000 server

Similar Messages

Maybe you are looking for