Disk Warrior error: "The Disk is still in use ( 2153, 4903)" HELP!

Thought my Mac HD was fine but I ran Disk Warrior V4.0 on my Tiger drive from an external FW 800 drive with a sandbox bootable clone done by SuperDuper and I got this error message:"The Disk is still in use ( 2153, 4903)"
Has anyone seen this?

Have you tried running it booted from your MacPro?

Similar Messages

Troubles shooting with burning data on my mac, I try to burn pictures on a CD-R disk, and I get a window that says, "Burning failed", one of the volumes on the disc is still in use", what does this mean??

Trying to burn data on a CD-R disk, but then I get a window that says, "Burning failed" , and that one of the volumes on the disc is still in use", so what does this mean? Not sure what they mean by volume still in use, this apparentely is keeping me from burning info such a pictures and or video's, how can I fix this?

PaulKerepka wrote:
Trying to burn data on a CD-R disk, but then I get a window that says, "Burning failed" , and that one of the volumes on the disc is still in use", so
what does this mean?
You have a disc inside your optical drive.
Not sure what they mean by volume still in use, this apparentely is keeping me from burning info such a pictures and or video's,
how can I fix this?
Remove the extra disc.
My answers are basic because:
You never told us which model iMac you have?
How you are burning? Through iMac? External burner?
Which OS you are currently using?

DVD Studio Pro 4 "Formatting Failed, One of the volumes on the disc is still in use." How do I fix this to burn a project to DVD?

Trying to burn a project to DVD but get this error message: "Formatting Failed, One of the volumes on the disc is still in use."
How can I fix this?
Thank you for the help!

PaulKerepka wrote:
Trying to burn data on a CD-R disk, but then I get a window that says, "Burning failed" , and that one of the volumes on the disc is still in use", so
what does this mean?
You have a disc inside your optical drive.
Not sure what they mean by volume still in use, this apparentely is keeping me from burning info such a pictures and or video's,
how can I fix this?
Remove the extra disc.
My answers are basic because:
You never told us which model iMac you have?
How you are burning? Through iMac? External burner?
Which OS you are currently using?

I made a website, but have now deleted it in order to take it down. However, after deleting it, the website is still online? Can anyone help me figure out how to remove the site completely?

I made a website, but have now deleted it in order to take it down. However, after deleting it, the website is still online? Can anyone help me figure out how to remove the site completely?
The site is joehewett.uk and I am worried that now I do not have the files of the website I cannot remove it?
James.

Did you delete the files from your Remote server?
Deleting the local site folder or the site definition in DW will have no effect on your remote site.
When I go to your URL, I see the index.html page with 16 code errors and this background image:
http://joehewett.uk/Untitled-1.jpg
So the site is still online until you delete those files from your server.
Nancy O.

Cannot delete Document Content Type. Getting error "Document Content Type Still in use" powershell, sharepoint 2013

not able to delete "Document" content type from a library. I have a custom content type. I have added the custom content type to all the items of library. also, i have added the custom columns from "Document" content type to my custom
content type. Still cannot delete the "Document" content type. I am doing the same process in different site collections and different libraries. But not able to delete in a few say- 10 in 100. Get the error - "Document content type is still
in use"

Hello
Here you go
http://blog.octavie.nl/index.php/2012/09/14/error-the-content-type-is-in-use-explained
https://social.technet.microsoft.com/Forums/en-US/e81020e3-2c12-4f39-a2f4-f1fd88ba6547/content-type-is-still-in-use-on-document-library
Please remember to click 'Mark as Answer' on the answer if it helps you

HT201441 what if the user also forgot id apple? how to solve this problem? whether the iPhone can still be used?

what if the user also forgot ps apple? how to solve this problem? whether the iPhone can still be used?

Start here:
https://iforgot.apple.com

HT3226 Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

Having problems with my mouse. Cannot scroll up or down or sideways. Did all the cleaning but still not working. Any help on this??

Hello:
Try resetting the PRAM and SMC.
Barry

TS3772 On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

Hello steveod2
The main thing to do is to sign out all services on your iPhone, like iCloud, iTunes & App Store, iMessage and FaceTIme. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

A torrent i recently downloaded keeps popping up again and again and again. I've already downloaded it, but the download window still pops up randomly. Help!!!

A torrent i recently downloaded keeps popping up again and again and again. I've already downloaded it, but the download window still pops up randomly. Help!!!

Try to clear your download history. You will find help in [[Clear Recent History]].

Disk Utility and Disk Warrior error on internal hard drive....PLEASE HELP!!

After running idefrag on my internal Western Digital 120gig hard drive. The drive did not appear after I rebooted my mac. I opened Disk Utility and the drive is there but grayed out. I used "repair disk" under First Aid and it gave me this error:
Verify and Repair disk “HD 120”
Checking HFS Plus volume.
Invalid B-tree node size
Volume check failed.
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Then I tried using Disk Warrior 3.0 to rebuild and it gave me this error:
error ""WD 120 GB" cannot be rebuilt. The original directory is too severely damaged. The disk was not modified (2155, 2179)".
I'm not sure if this is the right area to post this, but I need help as most of my important data is on this hard drive. What else can I do?
I am on a g4 quicksilver with 10.4.3 installed.

Sorry to hear about your problem but unless you are working with very large files such as with video editing, etc., using a defrag utility is not required with OS X and no defrag utility should be used on a hard drive without a backup first.
The current Disk Warrior version for Tiger is 3.0.3 and if Disk Warrior cannot repair the drive/directory, it must be in bad shape which was caused by using idefrag.
You can try using a data recovery utility such as Data Rescue (Prosoft Engineering) which includes a free trial version.

Error: The underlying task reported failure on exit - PLEASE HELP

After running Verify disc I keep getting the following message, What does it mean and how can I repair it? - the Repair disk option is always blanked out;
"The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair"

Maybe make a clone backup of the entire drive to an external FW drive that you can boot from.
Cloning a drive with directory damage, or corrupt data will result in the exact same errors. If the original isn't able to boot, most likely, the clone won't be able to either.
Backups are to protect your data when trouble strikes. After trouble rears it's ugly head, it's too late for clones. Manual (drag and drop) copying of the file can be accomplished, as long as the troubled drive mounts.
Once the original has been repaired, then cloning is once again a good backup protocol.

As a follow up from my recent question, I turned off the compatibility mode under all and regular, clicked out ok, ok then then went to itunes and played a song as they said to, and then tried to open the store and STILL CANNOT OPEN STORE, please Help!!!

Turning off the compatibility mode by deselecting the check box under each thing that it wants did nothing for my access to the itunes store, still a white page with "itunes store" in the middle of it. This is getting rediculous! Someone with computer smarts please help, I am at the end of my rope!

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Error : 'The Connection can not be used to perform thsi operation

Dear All,
I am getting an error like 'The Connection can not be used to perform thsi operation, it is either close or Invalid in this context.
Below is the code what am using:
Sub Select_Query()
Dim SQL_String As String
Dim rs As ADODB.Recordset 'This holds the data
Dim cn As ADODB.Connection 'Declaring Connection
Dim cmdobj As ADODB.Command 'Declare command Object
'Sheets("Payment").Select
Set cn = New ADODB.Connection
cn.Open ("Provider=MSDAORA;Data Source=MyDatabase;User ID=Prasad; Password=Prasad12;")
Dim count_value As Long
count_value = WorksheetFunction.CountA(Worksheets("Payments").Range("A:A"))
For i = 4 To count_value
SQL_String = Worksheets("Payments").Range("AA" & i).Value
Set rs = New ADODB.Recordset
rs.CursorLocation = adUseClient
rs.Open SQL_String, cn, adOpenForwardOnly, adLockOptimistic, adCmdText
Dim val As Integer
val = rs.recordCount
If val = 0 Then
Worksheets("Payments").Range("AZ" & i).Value = "No"
'Else
'Worksheets("Uploaded").Range("O" & i).Value = "Yes"
End If
cn.Close
Set con = Nothing
Next
'cn.Execute SQL_String
'con.Close
Set con = Nothing
End Sub
And select statment is picking one of the sheets, and SQL query is:
="SELECT sa.acct_id
FROM ci_sa sa, ci_sp sp, ci_sa_sp ss, ci_sp_geo spg,ci_acct_char cac
WHERE sa.sa_id = ss.sa_id
AND ss.sp_id = sp.sp_id
AND sp.sp_id = spg.sp_id
AND spg.geo_type_cd LIKE '%RR%'
AND spg.geo_val ='"&B4&"'
and sa.ACCT_ID=cac.ACCT_ID
AND cac.char_type_cd LIKE '%SDO%'
AND TRIM (char_val) IN ('"&Master!G9&"')"
Please help me in this..
Regards,
Prasad

Please, this is a Oracle forum, not a VBA forum. Mark this thread as answered and post it in a VBA forum.

HT1766 ive backed up and restored my phone but the battery is still draining quickly i need help if anyone can tell me what to do

we went through the steps as told by an apple rep. it doesnt give the option to pick or choose apps to keep or get rid of. the battery is still draing after the back up and restore. can anyone tell me why or what to do now? Thank you

If still problem after advice from Apple. Take it up with them again, iPhone 4S has full Warranty so let Apple solve the problem.

Error:the number of sample must be 0 please help.

dear genius.
I searched the same error in this board but I can not understand how can i fix my problem.
I am just a beginner in LV so I need your help. I made AM modulation and demodulation vi .
when I first used "simulated signal" as message signal, noting happened.
but, I changed simulated signal as "acquire sound", and add a play waveform, after that, problem occured.
actually, I can not understand about sample number or sampler rate .
how can i fix my problem?
and do you know some website to exercise digital communication using usrp and labview for trying ?
please let me know your idea.
thanks a lot.
Solved!
Go to Solution.
Attachments:
error.vi ‏164 KB

kimjihwan123 wrote:
thanks kingt of ni
thanks again. but can you tell me the differecne between sample rate and sample per second? (I thoungt it was same)
First of all Knight of NI is my title. Crossrulz is my alias.
Secondly, Sample Rate is the same as Samples Per Second. But you want to make sure your sample rate and number of samples gathered are the same from both sources. I would also turn off the Actual Time (or whatever it is called) in the Simulate Signal so that it just gives you the sine wave instead of using time to generate it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Disk Warrior error: "The Disk is still in use ( 2153, 4903)" HELP!

Similar Messages

Maybe you are looking for