Disk works fine on iBook, but appears as a new unwritten disk on a Mac Mini.
I have a DVD with several flash apps that when inserted in an iBook G4 works fine, but when inserted in a Mac Mini is shown as a new blank unwritten disk. What could be causing this? I would like to view the content on my newer 2007 Mini but currently can't.
Ok, I kinda goofed. This is auctally a CD-R as reported by disk utility, not a DVD. The problem still is still here though.
woodmeister50 The format is listed as Mac OS Extended and the partition map scheme is listed as CD Partition Scheme.
Similar Messages
-
Airport Express works fine with iBook but isn't seen by Dell laptop
I have an Airport Express connected to the internet which is automatically recognized by my iBook & works fine. My roomate has a dell laptop running Windows XP and it doesn't recognize the network. In other words usually when the wireless card recognizes a network it pops up in the taskbar and it isn't with the airport. Any suggestions would be appreciated.
iBook Mac OS X (10.3.9)At first we could plug the Dell in directly but that was before setting up the AX. Now that the AX works the Dell cannnot connect even wired. (It says that it's connected but it cannot find server when you try to open a webpage). Could this be a problem that the moden cannot go between Mac & windows?
Most modems tend to "remember" the last device connected to it, so it's important to do a complete power-down/power-up when switching devices. It's possible that your modem did this when you attempted to connect the PC directly. My purpose of having you connect the PC directly was to verify that it can access the Internet with a wired connection and that it's wireless setting needs to be troubleshot further.
The power recycle process should be something like the following:
- Power-off the modem & AX; If possible, leave the modem off overnight.
- Power-on the modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes. -
I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks
You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
ThanksDo the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.
-
I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
I’m using a PreSonus Firebox audio interface.
It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard. I tried different midi controllers, different keyboards, different midi cords, and check midi preferences. The audio interface is working fine and is recogonized, but the midi doesn’twork. I re-started the computer several times and then finally it miraculously starts working again.
I’ve been having to this every day now. Any help or ideas is very much appreciated.I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.
-
ITunes/Apple Mobile Device works fine w/iPod but not iPad
Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article? -
My ipad2 was working fine last night, but this morning when I woke it up... it no longer was connected to my network. While it can detect networks, it cannot connect to any (have tried at home and at work). I have tried: resetting router, resetting ipad, forgetting network, renewing lease on network, ensuring airplane mode is off, resetting network settings, turning wifi on/off. None of the typical solutions I can find online seem to work. HELP!
You've gone through all of the basics. You might look at this document regarding potential issues with wi-fi environments.
http://support.apple.com/kb/HT4199
If none of that works, and if a device restore doesn't work, it's time for a trip to the Genius Bar. -
hi! I am having a problem with my dictation. It works fine with Greek but it does not work at all with English. Anyone knows why?
Have you changed the system voice to an English one in system preferences?
-
Query working fine in 9i but throwing an error in Oracle 10g
Hi All,
I am having a query which contains large number of When clauses inside a case statement.
The Same SQL is working fine in 9i, but not working in 10G.
If we try to remove one of the When clause in the query, its working fine else it is giving the error ORA-00939 Too many arguments for functions.
Can any one tell me the solution for this and what is the maximum number of when clauses allowed inside case statemen in oracle 10g.
Thanks in advance
Regards
Karthikit should not have worked in 9iR2... it is correct according to the doc to return an error message when using more than 255 expressions...
SQL> select version from v$instance;
VERSION
9.2.0.7.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
X
SQL> select version from v$instance;
VERSION
10.2.0.2.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
when 16 then 17
ERROR at line 9:
ORA-00939: too many arguments for function
SQL> del 129
SQL> /
X
---------- -
apple id is working fine on computer but when using it to sign in for aps on iphone, it says 'incorrect id or password'
Nevermind... Tech had me sign into store and itunes. Signing in there fixed the problem.
-
Query working fine in toad but not in forms 6i
i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
delete from fiaz.tmp_topten_prod;
for i in c1(:year,:month)
loop
insert into fiaz.tmp_topten_prod
values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
end loop;
standard.commit;
message('inserted in temp');
exception when others then
message (dbms_error_text);
message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman AfzalAs per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help -
Fixed div that floats right works fine in IE but floats left in other browsers
I have a div that I want to float right and have remain in that position as a user strolls down the screen. I set the position to fixed which works fine in IE8 but when I view it in other browsers (chrome, safari, firefox) the div does stay in position but it floats to the left.
I believe it's just a simple setting that I'm not familiar with.
Thanks for your help in advance.You can't float a fixed division. Use margins instead.
http://alt-web.com/DEMOS/CSS2-Sticky-Text.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
ISight works fine in iChat but doesn't show up in Yahoo Messenger nor Skype
Hello, I was given an iSight webcam that works fine in iChat, but doesn't show up in Yahoo Messenger nor Skype, which are the IM programs I use…
I search on the Apple Support site a driver to download, but there is only an updater (iSight Updater 1.0.3) which doesn't run on Tiger... Any help please ?? ThxYou probably don't need it, but the Tiger "iSight Updater" is located in the \System\Library\CoreServices\iSight Updaters\iSight Updater folder.
(You must look manually because SpotLight does not find it.)
Double click the "iSight Updater" there to run the Firmware update manually.
Some options for other readers:
http://discussions.apple.com/thread.jspa?messageID=10084429�
iSight "Product Revision Level" in your Mac's System Profiler shows the installed firmware version for external (Firewire) iSight.
Firmware 1.0.3 Update offers only "Improved audio performance". It does NOT enable audio or any other function, so that is NOT your problem with Skype or YMM. Search or post in their dedicated help/discussions for best and quickest help with those specific, non-Apple apps.
Regardless of whether System Profiler utility shows Firewire iSight's Firmware (Product) level of 1.0.2 or 1.0.3, external iSight ought to work. You can test your external iSight using the suggestions on this linked page:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
EZ Jim
“I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
My HTML code works fine in IE8 but pages "jump" slightly to the right and left in Firefox
I have created a website that looks and works fine in IE8 but in Firefox some of the pages jump a couple of pixels to the left. I have tried to debug it but cannot find any coding errors.
Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum. -
song works fine in itunes but when i transfer it to my phone it playes back brocken and begins to skip. any solutions??
I have already restored my phone to the newest software and also completely uninstalled itunes and re downloaded it.Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you have gone through ALL the above steps and are still having problems, then you'll need to bring your phone into Apple for evaluation.
Maybe you are looking for
-
How do I get rid of an error box that refuses to respond but blocks my scroll bar?
error box says browser settings change. I don't understand what it means, but I also cannot use the choices to get rid of this box, blocking my scroll! it goes 30 sec to about a minute or 2 then returns. I did malware & Norton scan & figured it would
-
Hi Experts, Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up . I have 4400 controller and 1130 & 1250 AP models.
-
I note that there is at least one post on this topic - just looking for further input. When buying my iPhone 2 weeks ago I changed from Telstra (not 3G) to Optus 3G. Now my Optus signal seems to drop out very frequently - almost always when I "wake u
-
Javascript function call from PL/SQL block
Hello, I am writing this pl/sql block that has checkbox and onselect, it calls javascript function. I defined javascript function in page header, even though I get error that says function is not defined. Please help. Thank you, H.
-
Wht are best paramters for (EXTRACT & REPLICAT) DDL & DML paramters
hi, I just need paramter for DDL & DML paramters for extract & replicat paramter. i have one schema that has 500 tables but i have to replicate only 300 tables. so kindly tell me its relative & best one paramter for these tables. THanks in Advance Re