Disk write error, can't see iPod in usb port, could not format or restore

I have had them all folks. I won this schuffle in a golf tourney with closet to the hole, I wish I could take that shot back and shank one. In short the iPod new sw releases are crap. Here is what I did:
Plugged the ipod in a usb port in the back of my desktop to restore, would not restore from the high speed usb's in the frt of my Gateway, why? who knows.
I did not update the ipod when it asked me to upgrade after the restore, however, I did upgrade iTunes to version 6.0.1.3.
This config seems to be working, I can go into the ipod, delete the songs that are there and use the autofill and it has worked several times now. Prior to this I would get a disk write error, could not see the ipod in the usb, yada, yada, yada.
Apple has a serious problem with the latest sw as is evident from this forum. If I helped one person out with this post I am thankful as I am a tech kinda dude, not too much and have played with this, reinstalled the sw, faced east and chanted to Mecaa while rubbing the side of my machine, to no avail.
While I type this email message it's still working, put a pound in the till folks. This is a first kids, have not been able to do this several times in a row without some sort of error.
It's all trial and error, hope this helps some of you, let me know.
Out - Dj
  Windows XP  
  Windows XP  

hiya!
hmmmm. okay, if you're connecting to a Toshiba laptop, let's check up on this possibility:
iPod not recognized correctly on Toshiba laptop
otherwise, here's a good place to start with that error message:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
love, b

Similar Messages

  • 10.5.6 update...can't see iPod or usb thumbdrives

    I recently upgraded my desktop and laptop to Leopard (from a DVD install disc). After the upgrade, software update on the iMac showed several update for the OS. I allowed software update to install them. BIG MISTAKE. Now my iMac no longer allows me to sync my iPod. It is as if I am not even connecting it. Nothing, nada no response at all. My usb thumbdrive (PNY Attache), which worked fine prior to software update, upon plugging it in flashes several times and then simple goes dead. It seems to make no difference which usb port the iPod or usb drive are plugged into. They both work fine on the iBook which is 10.5 but has not had the software update run on it yet! (like I really would run it on this after the problems on the iMac!)
    I wonder if software update does a combo update or regular update. I have download both from apple's website but wanted to see what other though before trying to run the combo update.

    Hello, heatsiphonman,
    I am having the exact same issue with my 5G iPod. I tried a clean restart (with no memory of open windows), and all the other suggestions via the support website and it's still a no-go. Not sure where to go from here. It seems like it may be a Lion issue or a combination of Lion and iTunes 10.5. I may take it in to an Apple store and see if I can get it to sync there. Meanwhile, I'll keep a close eye on this topic to see if anyone else might be having this issue.
    Mike.

  • USB ports could not recognize DVD Burner and WD Portable disk

    Hello all,
    This is my first question to ask here about X1 Carbon. I hope you could help. I was trying to install a software using the Lenovo slim dvd burner, but the usb ports of the laptop didn't recognize it. Also, I tired to install the software using my portable HDD (Western Digital A08 Elements), but the usb ports of the laptop didn't recognize it as well. I plugged a usb thumb driver into the usb ports; it did recognize it!!! But I really need my dvd burner to be detected. I will appreciate if you could suggest an appropriate solution to my problem.
    Thank you
    IT-Support-Leb

    Hi,
    Welcome to Lenovo Community!
    I’m sorry to hear that you are facing the issue with USB port not detecting the CD and HDD drive on ThinkPad X1 carbon.
    You may refer to the steps from the following Lenovo article and check if it helps.
    Please click here to know the complete details on setting up the USB device option.
    Hope this helps.
    Best regards.
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPod problem - firmware update error. Disk write error.

    I need your help! I’me just bought a new iPod 60 GB photo (with color display) but when I connected it for the first time to my PC (with Windows XP Home Edition SP 2) using USB 2.0 I got the message: ”iPod not readable. This iPod needs to be reformatted for use on your PC”. Of course I decided to do that. The system had launched iPod updater. It asked me if I wanted to update or restore iPod’s software however the operation “update” was inactive (grey). So I choosed “restore”. Then a new window appeared: “Firmware update error. Disk write error”. On the iPod’s display a normal menu was replaced by exclamation mark. I tried to reset iPod, updated iTunes and iPod’s updater to the newest version and… nothing. It still doesn’t work. A folder with „!” mark comes up. I try to restore once again and it says: „Firmware update error. Disk write error”.
    Please help! What should I do to solve my problem? I want to add that my iPod is properly recognized by the computer system.
    Unfortunately, it’s rather impossible to give back my iPod to the store. It was bought in the U.S.A. and I live in Poland.
    Adam

    b “Firmware Update Failure” Possible Solution
    -- Disconnect the iPod
    -- Right click on "My Computer"
    -- Select "Manage"
    -- Select "Device Manager"
    -- Expand "Universal Serial Bus controllers"
    -- Right click on "Enhanced PCI to USB Host controller"
    -- Click on "Disable"
    -- Click "OK" to accept changes
    Run the Updater software (Start==>Run==>iPod) and wait till it says to "Plug in an iPod to update it"
    Plug in the iPod and wait (for a long while). It takes awhile because you are now running at USB 1.1 speeds. When it finally shows up, do the "update" or "restore", which ever you were trying to do.
    You can try to re-enable the "Enhanced PCI TO USB Host controller" after you are done running the Updater software and try to copy your songs and pictures to the iPod. This may or may not work. If not, revert back to USB1.1.
    See: Dirk Brewer, ""Firmware Update Failure", please help" #1, 11:01am Jul 23, 2005 CDT
    Also see: http://forums.ipodlounge.com/showthread.php?s=&threadid=94075
    http://docs.info.apple.com/article.html?artnum=300836

  • " the iPod software update server could not be contacted " what am I suppose to do now? please help.

    Hi, It's been a week now since im having this problem with my iPod touch 4thgen 8GB. it says it needs to be restored but when i do so it gives me an error which says " the iPod software update server could not be contacted ". I've tried restoring it a hundred times and each time this is what it says. under it is written " make sure your network settings are correct and your network connection is active or try again later ". what does that mean? that what am I suppose to do now? please help.

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Ipod cannot be restored, disk write error?

    I cannot restore this ipod, nor can i reformat it using any program, application, or even the command line. iTunes gives me the error "unknown error - 1418", and ipod updater gives me "Disk Write Error" when i try to restore it. Does anyone know if there is any way to salvage this iPod? or should i be returning it to Costco?
    this all started i think when the owner ran the batteries completely down. the ipod still gives the "connect to computer use itunes to restore screen".
    this ipod was purchased in june 2006, and is in perfect condition.

    See if doing a Restore on a Mac computer works
    . Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”

  • Ipod mini "Disk Write Error"

    I recently tried to restore my iPod mini (for the umpteenth time) after having numerous problems with songs not playing. I connected it to the computer fine, brought up the updater and when I tried to restore it came up "Unable to update firmware. Disk Write Error." I've tried this on two different PC's and got the same response, and gone through the step by step on the support website. Help anybody?

    hi Josh!
    "Unable to update firmware. Disk Write Error." I've tried this on two different PC's and got the same response, and gone through the step by step on the support website.
    just checking. were the step-by-steps you went through these documents?
    iPod not recognized correctly on Toshiba laptop
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    love, b

  • "Do Not Disconnect!?" "Firmware. Disk Write Error" ???????? Help Please

    Ok, heres the deal. I restored my ipod...but now it contiunes to have a "! in a triangle shape" sometimes refferes to as a "sad ipod" Well ive read the Whole Freakin Apple Site tryed the "5 R's" they say to try and others but still the same thing. And as a resul of Restoring My ipod mini it will not connect to itunes. It continues to say "Do Not Disconnect" on the ipod mini screen.(This is very very annoying) Then in itunes it will say "ipod updater" or something or that sort...(now get ready this is the biggest twist) so i click update....wait a sec as it connects..then it says...(ok here it is) "Firmware. Disk write error"...all at the sametime my ipod is displaying on its screen "Do Not Disconnect".........well im baffled so if anyone can please help me...i would repay them with my life....Im literaly dieing without it.
    ipod Mini   Windows XP Pro  

    “Firmware Update Failure” Possible Solution
    -- Disconnect the iPod
    -- Right click on "My Computer"
    -- Select "Manage"
    -- Select "Device Manager"
    -- Expand "Universal Serial Bus controllers"
    -- Right click on "Enhanced PCI to USB Host controller"
    -- Click on "Disable"
    -- Click "OK" to accept changes
    Run the Updater software (Start==>Run==>iPod) and wait till it says to "Plug in an iPod to update it"
    Plug in the iPod and wait (for a long while). It takes awhile because you are now running at USB 1.1 speeds. When it finally shows up, do the "update" or "restore", which ever you were trying to do.
    You can try to re-enable the "Enhanced PCI TO USB Host controller" after you are done running the Updater software and try to copy your songs and pictures to the iPod. This may or may not work. If not, revert back to USB1.1.
    See: iPod not recognized correctly on Toshiba laptop

  • Getting firmware update error. disk write error message

    i installed the lastest ipod shuffle update and when I try to restore ipod shuffle I get the error message "firmware update error. disk write error" have no idea what to do. ipod does not show up in itunes

    ok, someone else with similiar problem, I just opened the box 5 days ago, installed iTunes (the June 2005 version) that came on CD with it, ran iTunes, downloaded some music, plugged in Shuffle, goto download, fails, no device found, can see it under XP ok, goto apple.com to find support FAQ, I then ran up Ipod Updater, thinking that since it was new, firmware must be recent (little did I know ) so I thought do the Restore straight off, it started, then failed with the "disk write error" and havent been able to talk with iPod Updater since, then tried installing iPodUpdater to another PC, no luck, then downloaded later versions of iTunes and uPdater, installed on a 3rd PC, same deal, unable to communicate to Shuffle, rang phone support, spoken to two different support people, finally they agree its faulty (something I figured out 4 days ago) and suggest I return it to Apple for replacement, and fill out a Service Request form, which opened a can of new worms, like there is no "Warranty Replacement" option, lots of questions like Credit Card details and nowhere to actually define that I have a "faulty" or "dead" or Shuffle to return and they obviously did not read the comments, that were requested, as they simply sent docking station in the mail, so now back to square one, trying to lodge a Service Request to "replace" a brand new, dead shuffle. Not having a nice iPod experience here !!, but Itunes is good, although expecting it will take a couple weeks all up before I get a working Shuffle to actually download to. Tried again phone support, to sort out this mess, waited in queue, then line goes dead. Oh Well ... I blame my daughter for this heartache, she insisted on having an iPod.

  • ICal error - can't see the calendars on opening...

    iCal error - can't see the calendars on opening... unless i change the view - but then still the portlet in the top left hand corner remains blank.
    Re-installed the whole OSx system from original disks and still the same problem.
    cleared out the cache files, including trying to delete the metadata files... taken to my local Apple Centre (Academy) but no sucess so far.
    Any ideas? Is it because i have around 8 calendars? Is that too many?
    Could it be 'cos I sync with Missing Sync for my Palm TX?
    H E L P !!
    Powerbook G4   Mac OS X (10.4.7)  

    When a user launches iCal, they may have one of the following symptoms:
    * When iCal is launched the calendar is blank -- no calendars are listed on the left and no events appear in the day/week/month views
    * Switching views allows all events to appear but the calendars on the left are still missing
    * User can create a new event and designate a calendar but when the event is saved it cannot be seen
    * Clicking in the blank space where the calendars are supposed to be has no effect.
    This issue is a Sync Services issue and not directly related to The Missing Sync. Mark/Space has identified a couple of solutions to this problem that others have reported. For more information, see: http://www.macfixit.com/article.php?story=20060207074628694
    1) Quit iCal
    2) Locate the folder, User/Library/Application Support/iCal/Sources/ and delete the contents
    3) After deleting the files from this folder, lock the "Sources" folder. Do this by navigating up one level and selecting the "Sources" folder. Perform a "Get Info" (either through the "File" menu or by pressing Command-I with the "Sources" folder selected) then click the lock icon.
    4) Launch iCal and your calendars should reappear. Note that the relaunch of iCal will create a default 'Home' and 'Work' calendar, so make sure none of your calendars have the same names as the default .
    Do some backups first
    Follow those simple steps
    5) Go to Address Book, click on 'File' menu and choose 'Back up Address Book'. Go to iCal, click on 'File' menu and choose 'Back up database'.
    6) Go to Missing Sync and double click on the Backup Conduit and set it to backup all databases. Then run the sync with just that Backup conduit selected, disable all other conduits.
    7) Go to: /Users/<user name>/Documents/Palm/Users/<hotsync name>/ now hold the 'ctrl' key and click on the /Backups/ folder. Choose the option to 'Create Archive of "Backups"'. This is to safeguard your backed up data in case anything goes wrong.
    Now 'Reset Sync History' using the iSync preferences option. The first sync will likely be slower.
    8) Launch iSync
    9) Click on the iSync menu
    10) Choose Preferences (make sure the "Enable syncing on this computer" is checked)
    11) Click the 'Reset Sync History' button. Read and follow the onscreen directions.
    12) This may launch iCal. Also the status of the reset is showing in the iSync display. When the reset is complete quit both iSync and iCal.
    Launch Missing Sync and enable the Mark/Space Events and Tasks conduits and set them to Desktop overwrite Handheld. Disable all other conduits.
    Then sync, when you do, you will get a dialog box with an orange iSync icon on it. Check the box to erase the device, then click the 'Allow' button. It will overwrite your device. You will get one for events, one for tasks, and one for contacts. The next time you sync .mac or other devices that sync with iSync like an iPod, you will get these same dialog boxes for their databases and you should check the box and click 'Allow' in those cases as well.
    If you press the don't allow button you will need to reboot your computer.

  • "firmware update failure. disk write error."

    i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

    Have you read both
    For Firmware update failure. Disk write error please see
    http://docs.info.apple.com/article.html?artnum=301267
    http://docs.info.apple.com/article.html?artnum=300836

  • Nano, Disk Write error. Please help

    I tried updating and restoring my ipod nano with the iPOD Updater 2006-06-28, but it keeps saying Firmware update failure. Disk write error. I don't know what to do anymore, it seems like nothing is working. Thank you for any help.

    See this troubleshooting article.
    "Disk cannot be read from or written to" error syncing iPod in iTunes.
    See also this : iPod not recognized on a laptop.
    You may not have a laptop, but try the steps anyway if you get nowhere with the first link.

  • Firmware failure. Disk write error.

    I have gotten this new iPod shuffle, and I have installed the latest itunes, however when I try to install the latest software for the iPod I get "firmware failure. disk write failure." I get the same thing when I try to restore it. I cannot get windows or iTunes to recognize the iPod. Windows views it as a mass storage device, and it is completly oblivious to iTunes. Any suggestions as to what I can do? I have tried everything 3 times or more from the support pages.
    I cant seem to contact any other type of support. Every time I try to use the chat section it tells me to enter a valid serial number...
    wow.
    Any feedback is greatly appreciated.
    JP

    Okay, this probably isn't what people want to hear, but if you have the dreaded 'Disk Write Error' failure, it doesn't necessarily mean your iPod is hooped.
    Bought my Shuffle 1G yesterday. Brought it home, installed what I needed to (very little, as mine is the second Shuffle in the house). Anticipated problems, as my father's 512M Shuffle took three days to get working properly. I found myself pleasantly surprised to find that mine worked first shot, no muss or fuss. Funk-tacular!
    Or not. Thingy worked fine all last night and this morning, but fell flat on its face when I plugged it in this afternoon. It didn't freeze solid (at first), but it refused to take in any more songs, and the ones that were loaded into it seemed to be draining out of the memory like water from an uncorked bathtub -- every time I managed to get Itunes to notice my little white headache, more memory reported as empty, though Thingy still refused to take in any songs (unable to read, or some such windows nonsense). Every time I tried to restore -- regardless of the update version, of which I tried three -- I saw the error mentioned in the title.
    I'll delete about five hours of experimenting, hair-pulling, swearing, failing, wall-punching, and generally despairing over my iPlop purchase. Tried all five Rs to no avail, as well as formatting through windows. Nada.
    I wish I could tell you exactly why it's working now. I can't; I got lucky. I downloaded iPod update (1-10-2006) and Itunes (6), wiped the system as clean as I could of old iPod and iTunes software (uninstall, erase folders, empty Recycle Bin, basically everything short of taking Windex to the hard drive). Reinstalled the Ipod software from the CD, reinstalled and updated iTunes and iPod update, then for a lark decided to try for the fifteenth time to reinstall Thingy. Holy crap, it worked!! After a momentary freezeup and the requisite restore to fix it (a result of my yanking the stupid thing out of the port at the wrong time), Thingy is working fine.
    The moral? Don't despair, it can be fixed! Try everything more than once, get the latest software, start from scratch -- right from the CD in the iPoop box -- and keeping banging your head on it as long as you can stand it. You might be surprised!

  • Trying to restore and updater reads 'disk write error'

    I've been trying to restore my ipod and anytime i get the updater to recognize it a 'disk write error' message comes up and something about firmware. any ideas?
      Windows XP  

    Hi,
    I've tried EVERYTHING in Apple's recommendations but I still get the "can't read/write" error on Photos only, not music (which works fine). I get the error if I select iPhoto in the selection bar of the iPod prefs in iTunes. If I switch the selection bar to "photo library" it will update photos, but it does ALL modified, originals, etc and NO iPhoto albums (which I painstakingly created!) There must be a way to fix this problem and it's not on the page you guys keep sending people to!

  • Restore fails with "Firmware update failure. Disk write Error" message

    I am going totally bonkers with this one. My Shuffle stopped working suddenly.
    My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
    1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
    2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
    3. Tried formatting using Windows format, it is not able to complete the format
    4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
    5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
    I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
    I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
    Thanks,
    Kris
    Thinkpad   Windows XP Pro  

    hiya!
    just checking. have you worked through the possibilities from this document yet?
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    given that you're connecting to a laptop, we'd better check on this possibility too:
    iPod not recognized when connected to Windows laptop over USB
    ... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
    iPod not recognized correctly on Toshiba laptop
    love, b

Maybe you are looking for

  • How to find middle row in a table ?

    Hi Friends, Is it possible to find middle row in a table by SQL Query. KarTiK.

  • ERROR While Saving the Query

    Hi I am trying to save a a query, as YP_XXXXXXXXXX. it is giving me an error "Namespace /BIC/ must be set to changable". would anyone be able to help me out with the same Regards M

  • Where did my pro go?

    I ordered and paid for QT Pro a little over a year ago. Since, I have used it to edit several videos w/o a problem. BUT recently when I load QT, I can not access the PRO settings. I try to re-register but do not know where to find the reg. key. It is

  • Are there any tools for data encryption and decryption ?

    Hi, i am using oracle 9i R2, i want encrypt my data. Are there any tools available in market. Please let me know the ways to do data encryption and decryption. Thanks in advance Prasuna.

  • I forgot all of my security questions how can I fix this?

    I got an Apple iTunes gift card and put it in when I went to download an app it asked for the security question all of with I have forgot