Diskette o failure
well back again , My other computer won't start up properly. the message always when going to boot is diskette o failure? I have tried several times to fix . Went into Bios no go.How can i fix this to have no problems anymore.....................its a pain..................................connie
Hi starglazer. What model of computer do you have?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Similar Messages
-
How do I re-install Adobe Photohop Elements 8 from the original diskette?
How do I re-install Adoboe Photoshop Elements 8 from the original diskette. All the diskette wants to do is to uninstall the program. [If I did this would I lose all my photos?]
Thanks in advance for your help.
Tom Barker
<Removed by Moderator>no, you won't lose your photos. but you might want to prepare your catalog for migration, http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
and if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
I have WAE 500 , installed ACNS 5.3.3.8 on it , transferred it to a new location in the datacenter , then at power on i found the following output:
IBM BIOS (C) Copyright IBM Corporation 2004
Intel(R) Pentium(R) 4 CPU 1.86GHz
512M System Memory Installed
293M System RAM Passed
512M System Memory Installed
Event Log messages, enter Setup to view
8603 Pointing Device Error
1780 Hard Drive error - IDE only
162 Device configuration error
Press <ENTER> to resume, <F1> to Setup
------------------------------------------------------------------------------+
| Processor : Pentium 4 System ROM : E0EF - FFFF |
| Processor Speed : 1.86 GHz BIOS Date : 10/11/05 |
| Physical CPUs : 1 |
| COM Ports : 03F8 |
| System Memory : 624 KB LPT Ports : None |
| Extended Memory : 512 MB PS/2 Mouse : Not Installed |
| Shadow Ram : 384 KB |
| Cache Ram : 1024 KB |
| |
| Diskette Drive A: : 1.44 Mb 3.5" |
| Primary Master : None |
| Primary Slave : HL-DT-ST GCR-8240N-(PS) |
| SATA Port 0 : HDS728080PLA380-(S1) |
| SATA Port 1 : HDS728080PLA380-(S2) |
+------------------------------------------------------------------------------+
Press Any Key to Continue
ntel(R) Boot Agent GE v1.2.17
Copyright (C) 1997-2003, Intel Corporation
Intel(R) Boot Agent PXE Base Code (BA1217BC)
Copyright (C) 1997-2003, Intel Corporation
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting Intel Boot Agent.
1962 Drive does not contain a valid boot sector
Operating System not found
So is this considered hardware failure ?Sorry it is 511, i changed the compact flash (it was faulty) , then reimaged the appliance , and now it is working normally.
now the question is there is led beside the compact falsh that is red ,& after i changed the flash it still red although the box now is operating normally? -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Inter-Company Purchasing Failure,B12B1 screnario
I Build & Run B12B1 with B1iSN 2007 and is under testing.
B1PO2B1SO
- Create a purchase order in Subsidiary Company, Choose the vendor as Headquarter.
However, the following error has occurred.
SAP B1iSN Addmin Console >Monitoring>Message Log
Failure
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error Code: -5002 (-5002) Enter name of Business Place and VAT Registration No.(nnn-nn-nnnnn)
Do not know what the problem is.
Please help me.
Korea is the type of database.Hi,
Just check with your LPE. Business Place on marketing is mandotary fied in your localization. Thus please follow the steps below:
1.Uncompress the BizPacakge-B12B1.zip
2.Update the transformation stye sheet for biu.Z.B1PO2B1SO.xsl: Just add Business place below into the document header. You can refer to the attached.
<!--For Korean localization: Business Place and VAT Registration are mandatory-->
<BPL_IDAssignedToInvoice>
<xsl:value-of select="BPL_IDAssignedToInvoice"/>
</BPL_IDAssignedToInvoice>
3.Compress it again.
4.Import the BizPackage with B1i Control Center again.
Your LPE may talk to you soon. Just now I already have a concall with him to show how to do it.
Regards, yatsea -
Imminent hard drive failure message
can i return my laptop to the store for a replacement.. it is less than 5 months old and i am getting an imminent hard drive failure message. totally unacceptable
HP will replace the hard drive under warranty. Not too many stores will permit a return after 5 mos. We can also assist with a hard drive replacement.
-
Multiple iMac LogicBoard failures
So 3 years ago I took the plunged and converted the house to Macs. Nice experience generally. Yet in the last 2 months I have had two logicboard failures on two iMacs. The cost to fix these was quoted at over $1,000 each computer. Obviously given the age of the machines, this is not a viable fix.
I am now considering moving back to PC's (my 3 year old Mac laptop is also playing up).
After logicboard failure #1, I reluctantly forked out $2K for a new machine. I racked this up as a "bad" and unusual unit. #2 comes along and fails and it makes me mad. Worse, no sympathy from the guys in the Apple Store. I ask "Surely for a machine of this age, noone would possibly pay for a $1K logicboard? Isn't this priced to basically make you buy a new machine?" All I got back was smiles (they really didn't care it seems).
Question:
- Are Mac's prone to hardware failures?
- If they do get hardware failures are you basically just in trouble given the absurd component prices to fix ($700 for the logicboard part alone)? How can Apple justify $700 for a logicboard part?
- Does Apple offer any discounts to people who have had these multiple bad experiences? (I'm partly kidding here, but also hoping)
My Mac laptop is playing up so I may be two Mac's down. I am considering going back to the darkside now and buying PC's again.
Anyone got any comments?
ThanksThat a UPS unit would have prevented your logic board failures. Properly designed power supplies do not need a UPS unit in this country. In some third world countries where the power is unreliable on a daily basis with large power swings, they are a must have.
In my opinion, the G5 iMac's were a poor design with inadequate heat dissipation, weak power supplies and logic boards. Most of them ran for years, but an inordinate number of them had multiple failures. The new aluminum models are a much better design with most of the high heat components located at the top of the machine.
I had no hardware problems with my eight year old Dell...but I'm still sticking with Apple because of their superior software performance.
Good luck with what ever you decide...virg -
Multiple Hard Drive Failures on my Macbook Pro - Entourage reminders?
Over the past 2 months I've had three hard drives fail on three different macbook pro computers.
I've retraced my steps, searched many forums, and spoken with multiple Mac Geniuses but still can't figure out what's happening. The IT guy at work is about to kill me and I really want to figure out what's going wrong so I can fix it (or change my current behaviors).
Computer #1 - Out of the box, 2-3 weeks old. I took the computer home to do some work over the weekend. I didn't turn the it off before transporting it, but I did wait for it to go to sleep completely (I've since read that it takes a few moments while things in RAM switch over to the Hard Drive to save incase of power failure). I worked on it a bit at home, mostly just internet searches and a few word documents. When I returned to work my computer was running slowly and suddenly all of the programs locked. Since I've had this problem before with my personal computer (a G4 Powerbook), I tried the force quit options to no avail so I just held down the power key to power off. When I rebooted I got the dreaded "no" symbol.
Computer 2: IT gave me a used macbook pro that they repurposed for me. I made sure to shut down before transporting this computer. A few days later, before I even got to transfer all of my files, the computer started running slowly, programs locked. I eventually got the computer to shut itself down (as IT didn't want me to do a forced reboot) but upon restarting I got an even more dreaded screen, the folder with a question mark in it.
Computer 3: It was a fairly new computer, though a bit more ram, and probably only a few months old (used by a freelancer). It worked great. I took it home several times, transfered all of my files. Set up everything perfectly. Three weeks in, after working at my desk for about 4 hours, everything began to slow down. I called IT immediately and remotely sent a force shut down message. Nothing happened for about 15 minutes so I left for a meeting. I came back a few hours later and my computer was off. When it restarted, nothing appeared. There wasn't a "no" symbol or folder with a question mark in it, just a blank screen.
I've read and thought about all of the options.
- Large Magnet somewhere - It would have affected my personal computer (if at home) or my colleagues (if at work) or everyone else in nyc (while on the subway)
- Too hot - Possible I suppose, but how does running iTunes, powerpoint, and entourage do this?
- Downloaded something/Virus - We don't have administrative privileges. I can only update some software and send/receive folders. Plus, can any single file cause this much damage?
- Moved before asleep - This might have happened on the first computer, but I doubt it could happen to three. I always shut it down now before transporting, and I was sitting at my desk for hours before I had any trouble last time.
The one common factor that I haven't mentioned.
We use Entourage as a mail client here.
Each time the computer froze, the first things to freeze were the Entourage calendar reminders. Entourage seems to run strangely with the airport, but not with our LAN. When my computer froze last time, I had the aiport on but was working off the LAN. Could Entourage cause this much trouble? Has anyone else had trouble with entourage calendar reminders or failing hard drives?
Oh, and it also always happens on a Monday. I've taken the computers home multiple times though, so I'm not sure if it's something I'm doing during the transport or not, but the computer is always off now when I move it. I also cary my personal computer with me often, same routes and bags, so I'm not sure why it's not affected.
Thankscolumbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.
I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.
-
In case of Control File Failure, Create Control File cmd how get scn?
The following lines i picked from the
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:5033895918209
======================================================
1. We can use the 'alter database rename ' at mount stage to rename any datafile. Or is it not possible to rename the system datafile like this? Why?
2. What happens to the SCN information in the controlfile when a controlfile is recreated? How will the database sync the SCN with that of the datafiles?
If I issue a 'backup controlfile to <file>' at 8 am and then restore that controlfile binary backup at 10 am and try to open the database, it will give me a control file old error. I understand that it is because the SCN is not in sync. But if I issue a 'backup controlfile to trace' at 8 am and use that script to recreate a new controlfile at 10 am, why doesn't I get the error? Where does it get the SCN information then?
So what is the use of taking a binary copy of the controlfile. Looks like having a 'backup controlfile to trace' script is better than a binary backup. Do you agree? Why/whynot?
Followup August 16, 2002 - 2pm US/Eastern:
1) you could but I just always did it with the create controlfile statement.
When moving system -- I do it that way
When moving ANY OTHER tablespace -- i just offline it, move the files, rename the files online it.
2) it just happens.
The control file you create will read the files to figure out what is up.
I agree, I've never used a binary controlfile backup myself.
=========================================================
My Question- In the Point2 above "Where does it get the SCN information and how control file do SCN Sync with data files?
"1. The CREATE CONTROLFILE reads SCNs from the DataFiles. If the
database was last shutdown, all the datafiles are "non-fuzzy" and have the same
SCN (as of the shutdown checkpoint), If the database or some of the files are from
are hot backup, you cannot open the database because the SCN of some files is
older (lower) than others -- that is why a RECOVER (DATABASE or DATAFILE) is
required.
See http://web.singnet.com.sg/~hkchital/Incomplete_Recovery_with_BackupControlfile.doc
2. I'm not sure I agree with Tom Kyte's response
"I agree, I've never used a binary controlfile backup myself. "
to the question
"So what is the use of taking a binary copy of the controlfile. Looks like having a 'backup controlfile to trace' script is better than a binary backup. Do you agree? Why/whynot?"
If you have lost your database (storage/filesystem failure) and all your datafiles are lost,
you cannot simply do a CREATE CONTROLFILE from a Trace -- because the
CREATE CONTROLFILE has to read and verify all the datafiles specified in the
CREATE statement. If you have an RMAN Repository, you can use that to restore
your database files but otherwise, the RMAN information about backups and backupsets
are in the binary controlfile.
That is why it is important to take binary controlfile backups either manually or
using RMAN or using CONFIGURE CONTROLFILE AUTOBACKUP ON. -
Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
ShashiDear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar -
Toshiba Satellite L650-07U, Hard disk failure and replacement
Hi all,
I have Toshiba Satellite L650-07U Laptop, Model: PSK1EC-0700Q with 4GB RAM, 650GB HD, Windows 7 Home Premium installed. At the time of first use, i made Recovery DVDs which took 4 blank DVDs using Recovery media creator.
From 2 weeks it is giving problem, at start its slowdown with every application, then suddenly it started Hard disk failure error and ask to backup important files. From that instant i did all my backup save in another portable Hard drive.
I had hiren boot CD, and ran RAM test and found it OK, and then run Hard Disk test and found few bad sectors at few certain point, As 650GB Hard disk was taking alot time of time for checking bad sectors, so i stopped that application.
First I tried Recovery DVDs to restore Windows, but it failed as Laptop DVD-Writer was unable to boot from those created DVDs (DVDs are OK as had checked it on Desktop computer DVD-ROM), Laptop DVD-Writer is also working as I test few more bootable CDs and it booted perfectly, but it is not booting from Recovery DVDs.
Than i tried to restore from Recovery partition using Factory restore settings, it erases all data and reinstall new and fresh copy of Windows 7 Home Premium. It works fine for few hours than again pops up Hard Disk Failure message again and again. I searched here in Toshiba Forum and have found similar problem with other members and finally decided that it need to replace Hard Disk with new one. As It is now two and a half month old, thats why i need to buy new Hard Disk for my Laptop.
I checked all partitions of drive using Hiren Boot CD, and had found that there are four default partitions in Toshiba original laptop drive,
One hidden partition of 1.5 GB
One hidden partition of almost 21 GB
One hidden partition of almost 12 GB
One partition of 561 GB, which was the original partition where windows 7 was installed along with all of my Data.
Now I want to replace faulty drive with a new one and have a lot of question in my mind which I need to share with you guys.
At the time of first use I installed Windows 7 64 bit edition, and made Recovery DVDs, and at second time of restore to factory setting I had installed Windows 7 32 bit. I have confusion about recovery DVDs (which is not booting from default DVD-Writer of Laptop), either it has 64 Bit recovery data or 32 bit? Or have both 64 and 32 bit Data.
Toshiba restore to factory setting without using any recovery DVD/USB is the best possible way to restore Windows 7, How can I make same recover hidden partitions from original/faulty hard drives to new hard drive partitions? Is this possible and how?
On Default hard drive there was one partition of 561GB instead of two or more partitions. Is this possible to split partitions in new hard drives instead of one big partition?
As Recovery DVDs are not able to boot from laptop default DVD-Writer, is it possible to open those DVDs on another System and copy tem in USB drive and use it for booting? If it is possible than please show me the steps for making bootable USB from these Recovery DVDs.
Thanks,
masterleous
Solved!
Go to Solution.Satellite L650-07U (PSK1EC-07U00Q)
This site is for US computers. I doubt you'll get your questions for that Canadian model answered here.
There appear to be two recovery partitions. Maybe one for 32- and one for 64-bit Windows. Or maybe one is for English and the other for French.
Your User's Manual isn't much help either. You probably need to ask Toshiba tech support in Canada.
About all I have to offer is this: Be wary of drives with advanced-format technology. See my message about that.
-Jerry -
HDD failure, I'd like to know how to get Windows 7 back on it.
Hello everyone, I've had a HDD issue lately, but before I move on to describe my issue, here are the specs of my notebook:
HP Pavilion dv6-3264ca
AMD Triple-Core CPU 2.2 Ghz
6GB RAM
128MB ATI Graphic Card
750GB Toshiba HDD
Windows 7 64-bit
The issue:
Recently I've had a very unfortunate HDD failure. The recovery partition wouldn't even load. I tried booting my notebook on Linux with the HDD still attached, and it wouldn't read. I extracted the HDD and placed it in an HDD-enclosuer and it still wouldn't load on Windows XP or Vista or 7. It would however read in the device manager of Windows and also in the BIOS.
I needed to extract some high-priority data from there so I managed to retrieve all my data safely through a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help it be usable again, and if that were to happen, the recovery partition would then be removed in the process.
In addition to that, I would like to install Windows 7 64-bit onto the drive, but the notebook box did not come with an installation CD, which is quite frustrating. Is there any way HP can let me download Windows 7 through some warranty service?
I have a one-year warranty on my laptop.
So in closing, I would like to know if I can get Windows 7 back onto my HDD for free, or if I need to go about buying Windows 7 again.
Any advice from you kind folks?
This question was solved.
View Solution.Hi,
Here are Two options.
1. If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
2. You can order a replacement set of Recovery Discs using the link below - these cost around $30 if you live in the US.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Desktop freezes and hard drives failure
Hey i faced a recent problem with my Computer, when i log in it freezes/crash i got told its due to my sound drive failuring, i tryed to download HP assistant to upgrade my sound drive but it cames up saying " Error 1719. windows installer service could not be accessed" I went to the HP software website to see if theres any sound drive but there arnt. I cant do a system restore because an error pops up. I tryed everything, nothing seems not to work .
Heres my computer specs
Im in safe mod if u want to know ^ ^
System Information
Time of this report: 4/29/2011, 14:11:56
Machine name: ASHDOWN-PC
Operating System: Windows 7 Home Premium 32-bit (6.1, Build 7601) (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Compaq-Presario
System Model: KQ318AA-ABU SR5414UK
BIOS: v5.03
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 2048MB RAM
Available OS Memory: 2046MB RAM
Page File: 556MB used, 3536MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Previously: Crashed in system information (stage 4). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: This computer cannot play audio because the Windows Audio service is not enabled. Use the Sounds and Devices Properties control panel to enable audio. No sound card was found. If one is expected, you should install a sound driver provided by the hardware manufacturer.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name:
Manufacturer:
Chip type:
DAC type:
Device Key: Enum\
Display Memory: n/a
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1600 x 1200 (32 bit) (1Hz)
Driver Name:
Driver File Version: ()
Driver Version:
DDI Version: unknown
Driver Model: unknown
Driver Attributes: Final Retail
Driver Date/Size: , 0 bytes
WHQL Logo'd: n/a
WHQL Date Stamp: n/a
Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35}
Vendor ID: 0x0000
Device ID: 0x0000
SubSys ID: 0x00000000
Revision ID: 0x0000
Driver Strong Name: Unknown
Rank Of Driver: Unknown
Video Accel:
Deinterlace Caps: n/a
D3D9 Overlay: n/a
DXVA-HD: n/a
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
Sound Devices
Description:
Default Sound Playback: No
Default Voice Playback: No
Hardware ID:
Manufacturer ID:
Product ID:
Type:
Driver Name:
Driver Version:
Driver Attributes:
WHQL Logo'd:
Date and Size:
Other Files:
Driver Provider:
HW Accel Level: Emulation Only
Cap Flags: 0x0
Min/Max Sample Rate: 0, 0
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Razer Arctosa
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010B
FF Driver: n/a
Device Name: Razer Arctosa
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x1532, 0x010B
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x8086, 0x27C9
| Matching Device ID: usb\root_hub
| Service: usbhub
|
+-+ USB Input Device
| | Vendor/Product ID: 0x1532, 0x001C
| | Location: Port_#0002.Hub_#0002
| | Matching Device ID: generic_hid_device
| | Service: HidUsb
| |
| +-+ HID-compliant mouse
| | | Vendor/Product ID: 0x1532, 0x001C
| | | Matching Device ID: hid_device_system_mouse
| | | Service: mouhid
Gameport Devices
PS/2 Devices
+ HID Keyboard Device
| Vendor/Product ID: 0x1532, 0x010B
| Matching Device ID: hid_device_system_keyboard
| Service: kbdhid
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
System Devices
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA
Device ID: PCI\VEN_8086&DEV_27CA&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EA
Driver: n/a
Name: Intel(R) G33/G31/P35/P31 Express Chipset PCI Express Root Port - 29C1
Device ID: PCI\VEN_8086&DEV_29C1&SUBSYS_29C18086&REV_10\3&2411E6FE&1&08
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9
Device ID: PCI\VEN_8086&DEV_27C9&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E9
Driver: n/a
Name: Intel(R) G33/G31/P35/P31 Express Chipset Processor to I/O Controller - 29C0
Device ID: PCI\VEN_8086&DEV_29C0&SUBSYS_2A78103C&REV_10\3&2411E6FE&1&00
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
Device ID: PCI\VEN_8086&DEV_27C8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E8
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Device ID: PCI\VEN_8086&DEV_27DA&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&FB
Driver: n/a
Name: Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Device ID: PCI\VEN_8086&DEV_27C0&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&FA
Driver: n/a
Name: High Definition Audio Controller
Device ID: PCI\VEN_8086&DEV_27D8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&D8
Driver: n/a
Name: Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8
Device ID: PCI\VEN_8086&DEV_27B8&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&F8
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) PCI Express Root Port - 27D0
Device ID: PCI\VEN_8086&DEV_27D0&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&E0
Driver: n/a
Name: Intel(R) 82801 PCI Bridge - 244E
Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_2A78103C&REV_E1\3&2411E6FE&1&F0
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
Device ID: PCI\VEN_8086&DEV_27CC&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EF
Driver: n/a
Name: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Device ID: PCI\VEN_10EC&DEV_8136&SUBSYS_2A78103C&REV_01\4&3601B127&0&00E0
Driver: n/a
Name: Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB
Device ID: PCI\VEN_8086&DEV_27CB&SUBSYS_2A78103C&REV_01\3&2411E6FE&1&EB
Driver: n/a
Name: NVIDIA GeForce 9600 GT
Device ID: PCI\VEN_10DE&DEV_0622&SUBSYS_82A11043&REV_A1\4&1EA08276&0&0008
Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7600.16385
WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7600.16385
WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7600.16385
MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7600.16385
WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7600.16597
Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
WMT VIH2 Fix,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
Record Queue,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Switch Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Virtual Renderer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
WMT DV Extract,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
WMT Virtual Source,0x00200000,0,1,WLXVAFilt.dll,15.04.3508.1109
WMT Sample Information Filter,0x00200000,1,1,WLXVAFilt.dll,15.04.3508.1109
DV Muxer,0x00400000,0,0,qdv.dll,6.06.7600.16385
Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7600.16490
WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7600.16385
DivX AAC Decoder,0x00800000,1,1,daac.ax,7.01.0000.0010
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7600.16385
AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7600.16490
VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7600.16490
SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7600.16724
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft TV Captions Decoder,0x00200001,1,0,MSTVCapn.dll,6.01.7600.16385
MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16490
CBVA DMO wrapper filter,0x00200000,1,1,cbva.dll,6.01.7600.16385
MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7600.16490
SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7600.16724
Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7600.16385
SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7600.16724
Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
DivX MKV Demux (unrestricted),0x00200000,0,1,DMFSource.ax,1.00.0002.0006
Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16490
MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7600.16490
DV Splitter,0x00600000,1,2,qdv.dll,6.06.7600.16385
Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7600.16490
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7600.16385
ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7600.16490
Video Renderer,0x00800001,1,0,quartz.dll,6.06.7600.16490
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7600.16724
Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7600.16385
Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7600.16490
DivX H.264 Decoder,0x00800000,1,1,DivXDecH264.ax,9.00.0001.0021
Video Renderer,0x00400000,1,0,quartz.dll,6.06.7600.16490
File Writer,0x00200000,1,0,WLXVAFilt.dll,15.04.3508.1109
DivX Decoder Filter,0x00800000,1,1,DivXDec.ax,7.01.0001.0014
VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7600.16385
WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7600.16385
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7600.16385
File writer,0x00200000,1,0,qcap.dll,6.06.7600.16385
iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7600.16385
iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7600.16385
DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7600.16385
Microsoft TV Subtitles Decoder,0x00200001,1,0,MSTVCapn.dll,6.01.7600.16385
Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7600.16385
DivX MKV Demux,0x00600000,0,1,DMFSource.ax,1.00.0002.0006
AVI Draw,0x00600064,9,1,quartz.dll,6.06.7600.16490
RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7600.16385
WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7600.16385
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7600.16724
DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7600.16385
LAME Audio Encoder,0x00100000,2,1,lame.ax,1.00.0054.50801
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7600.16385
Null Renderer,0x00200000,1,0,qedit.dll,6.06.7600.16385
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7600.16385
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7600.16385
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7600.16724
Smart Tee,0x00200000,1,2,qcap.dll,6.06.7600.16385
Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7600.16385
AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7600.16490
NetBridge,0x00200000,2,0,netbridge.dll,6.01.7600.16385
AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7600.16490
Wave Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7600.16490
File stream renderer,0x00400000,1,1,quartz.dll,6.06.7600.16490
Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7600.16724
AVI Mux,0x00200000,1,0,qcap.dll,6.06.7600.16385
Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7600.16490
File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7600.16490
File Source (URL),0x00400000,0,1,quartz.dll,6.06.7600.16490
Media Center Extender Encryption Filter,0x00200000,2,2,Mcx2Filter.dll,6.01.7600.16385
AudioRecorder WAV Dest,0x00200000,0,0,WavDest.dll,
AudioRecorder Wave Form,0x00200000,0,0,WavDest.dll,
SoundRecorder Null Renderer,0x00200000,0,0,WavDest.dll,
Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7600.16385
Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7600.16385
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7600.16385
MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7600.16490
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7600.16385
MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7600.16490
Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7600.16385
DivX 6.9.2 Codec (2 Logical CPUs),0x00200000,1,1,qcap.dll,6.06.7600.16385
Fraps Video Decompressor,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7600.16385
Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7600.16385
x264vfw - H.264/MPEG-4 AVC codec,0x00200000,1,1,qcap.dll,6.06.7600.16385
DivX 6.9.2 YV12 Decoder,0x00200000,1,1,qcap.dll,6.06.7600.16385
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
PCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7600.16490
GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7600.16490
Messenger Audio Codec,0x00200000,1,1,quartz.dll,6.06.7600.16490
CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7600.16490
CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7600.16490
MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7600.16490
PBDA CP Filters:
PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7600.16724
PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16724
PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7600.16724
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7600.16490
Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7600.16490
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7600.16385
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7600.16648
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7600.16385
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7600.16385
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7600.16385
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7600.16724
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7600.16724
PTFilter,0x00200000,0,0,EncDec.dll,6.06.7600.16724
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7600.16724
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7600.16385
Audio Renderers:
Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7600.16490
Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7600.16490
EVR Power Information
Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
Quality Flags: 2576
Enabled:
Force throttling
Allow half deinterlace
Allow scaling
Decode Power Usage: 100
Balanced Flags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 50
PowerFlags: 1424
Enabled:
Force throttling
Allow batching
Force half deinterlace
Force scaling
Decode Power Usage: 0You can make them visible on the Desktop using Finder/Preferences/General. You can also set them to show up in the Finder Sidebar using Preferences/Sidebar.
-
Dsl modem failure caused malfunction of ethernet port. In attempt to solve problem I did a clean instillation of Leopard 10.5.4 and then update to 10.5.5 with access to internet through apple usb to ethernet adapter. If I attempt to update software to 10.5.6, .7 or .8 it freezes my network system preferences and computer will no longer shut down. The network connection assistant also no longer sees a connection to the internet throught the usb/ethernet adapter. I have checked they systerm Tech tool deluxe which shows no problems and also used hard drive utility on instillation disk which found no problems. Permissions were also checked as well and no problems noted. Any thoughts as I really like my imac G5.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If all the above fails, then it appears to be time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
Maybe you are looking for
-
I will be using a HDMI cable to connect an Apple TV box and a Comcast cable TV box to my TV. My TV has only one HDMI port. To do this I will need a 2x1 HDMI splitter or a 2x1 HDMI auto switch (preferred). ?Is there any Apple TV HDMI port voltage? Whe
-
Lenovo G480 Problem: I cant Create a new Drive
Hi everyone.. so my my laptop is a Lenovo G480 intel i3 4GB ram My operating System when i bought this was Windows 7 Home Basic. So my problem is that my Local Disk C is 420 GB while my Local Disk D is only 25.4 GB So I want my disk D to have more sp
-
HT4623 why cant i update my iphone to ios 6?
I have an Iphone 3GS and I'm trying to update it to IOS 6 but its not letting me upgrade it. Until I upgrade it I cannot add any apps onto my phone. Someone please help.
-
Computations on ONE column possible?
Very new to APEX so bare with me here. Im making a simple report for our Customer Service dept. based on meter values from customer electricity meters. The issue im having is that we only store the metervalues in our database and not the actual consu
-
New Clarity slider in 1.1
Wow! I shoot boats on water, so far with a 10D (God! I'm chomping at the bit for a 1D Mk III!!!) and the Canon 100-400 L. When I slid that puppy over to 100, the difference and improvement was incredible! It's like having had a headache for years, no