Diskpart List volume not working in Windows 7
Hi
Im trying to run diskpart-List volume command using System Exec.vi in LabVIEW 2010 in Windows 7 32-bit/64-bit.
When i try to run this command through script text file in Windows XP, I could get the Standard Output String with volume informations in detail.
But the same VI doesnt work in Windows 7 32-bit/64-bit. i.e., Standard Output string is empty
I have attached the VI and Script text file.
Suggestions/Solutions are welcome.
Thanks in Advance,
Charu
Attachments:
System Exec_diskpart_List volume.vi 9 KB
Script.txt 1 KB
Hi,
what does this command returns ? The list of files in your C:\ ?
There is an OpenG function which make the same thing (list recursive folder), but not sure it's what you're expecting...
Regards,
V-F
Similar Messages
-
Brightness and volume control keys not working with windows 7?
brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?
Welcome to the Apple Support Communities
Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
To install them, follow these steps:
1. Press the X key while your Mac is starting to start into OS X.
2. Open Boot Camp Assistant and tick only the option to download Windows support software.
3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers -
Flash 10.2 not working in Windows 7 IE8 despite 'successful' installation
Hi there,
I downloaded flash player to attempt to view flash media on sites such as bbc website and youtube.
Despite the installation claiming to be successful, I still cannot view video on any sites I have tried.
(bbc website says I don't have the correct version, youtube says I need to upgrade)
My system details are as follows:
Windows 7 Home Premium, 32-bit operating system
Internet Explorer 8.0.7600.16385IC (it makes no mention of being 64-bit)
Flash Player 10.2.152.26
I have tried following the troubleshooting guides on the adobe website, particularly 'Flash player does not work in Windows 7'
but I have not managed to fix the problem.
I've also gone through several threads on this forum, relating to similar problems, but I'm sorry I haven't been able to fix it.
So far, the stuff I have tried is listed below, but since it has not worked, I assume I have done something incorrectly, missed something,
or I have not yet found the right solution.
The Flash Player does not appear on my programs list, but it does show up in the control panel/list of installed programs.
I don't know how to get flash player to run on its own, so I can't access settings etc. for the hardware acceleration.
The folder located at C:\Windows\System32\Macromed\Flash contains 5 files:
Flash10m.ocx; FlashInstall.log ; FlashUtil10m_ActiveX.dll; FlashUtil10m_ActiveX.exe; install.log
When I visit the adobe page for testing flash player, it does not show me any animation; there is a blank white rectangle with a tiny red 'X' in its top left corner, which I assume should be a box containing the version information if the player had been recognized.
I have looked at the IE8 'tools/Manage Add-Ons - 'show' All Add Ons, and there is no listing of 'Shockwave Flash Object'
although there is a listing of 'shockwave activeX control' which is enabled.
I've set my IE8 security settings to medium for the categories of 'Trusted Sites' and 'Internet' and I've made sure to set:
'Download Signed ActiveX Controls' to 'Prompt' and 'Run ActiveX Controls And Plug-ins' to 'Enable'
I've tried unintalling the flash player using the specified tool, removing the adobe download tool, and manual re-installation.
Finally, I tried (with much hesitation) to modify the registry key referred to in the Flash-Killer or 'kill-bit' guidlines.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{D27CDB6E-AE6D-11CF-96B8-444553540000}
The key existed, with a Name: compatibility flags ; Type: REG_DWORD ; Data: 0x0000400 (1024)
So I changed the value from 400 to 000 as suggested.
This is not worked either, despite uninstalling flash player, re-booting and re-installing.
Finally, I updated the graphics driver for my ATI RADEON HD 5670 card, but aside from scaring me by drastically altering the screen resolution and not allowing me to roll back the driver, it has unfortunately not solved the flash player problem.
I appreciate that the people with expertise have given loads of help on this problem, I hope I haven't missed something important when following the advice, but I'm pretty stuck, so if anyone can help, I thank you very much.
thanks,
padHi eidnolb,
unfortunately, the installation of FP 9.0.280 based on running flashplayer9r280_winax.exe has not worked:
I cannot see the animation / spinning, there is no animation and no box showing the version.
(I have included a partial screenshot in this message, file name flashplayer_test_screenshot.jpg)
Therefore, I did not continue with the instructions.
The control panel list of programs does show 'Adobe Flash Player ActiveX' as being installed, version 9.0.280.0
There were no messenger utilites listed in the system tray.
As you advised, the first thing I did was to modify the {D27CDB6E-AE6D-11CF-96B8-444553540000} registry key value from 400 to 000.
After modifying the value by making it Zero, I re-started the computer.
Regarding Administrator Account, I looked on ther 'User Accounts' information, and there is only one user, my dad, and he is listed as Administrator.
Sorry, but I will need to ask for your further advice. In case it is useful, I tried to get a list of all processes that were running on the computer
(in case some of them inhibit the installation. most of them don't mean anything to me, even when they are given a description by the windows 7 Task Manager Processes List - I have pasted the text file below in this post, since I couldnt see how to attach files.)
thank you for your help,
pad2001
Image Name PID Session Name Session# Mem Usage
========================= ======== ================ =========== ============
System Idle Process 0 Services 0 24 K
System 4 Services 0 956 K
smss.exe 312 Services 0 880 K
csrss.exe 456 Services 0 3,328 K
wininit.exe 528 Services 0 3,736 K
csrss.exe 536 Console 1 6,104 K
winlogon.exe 592 Console 1 5,288 K
services.exe 632 Services 0 7,200 K
lsass.exe 640 Services 0 9,380 K
lsm.exe 652 Services 0 3,436 K
svchost.exe 760 Services 0 7,008 K
svchost.exe 856 Services 0 5,832 K
atiesrxx.exe 920 Services 0 3,376 K
svchost.exe 988 Services 0 16,176 K
svchost.exe 1028 Services 0 51,320 K
svchost.exe 1068 Services 0 28,928 K
audiodg.exe 1156 Services 0 15,976 K
svchost.exe 1200 Services 0 12,432 K
svchost.exe 1316 Services 0 11,852 K
atieclxx.exe 1408 Console 1 4,956 K
wisptis.exe 1432 Console 1 6,512 K
AvastSvc.exe 1552 Services 0 22,832 K
wisptis.exe 1792 Console 1 8,360 K
TabTip.exe 1804 Console 1 10,448 K
dwm.exe 1892 Console 1 29,420 K
explorer.exe 1940 Console 1 53,728 K
RtHDVCpl.exe 336 Console 1 8,688 K
AvastUI.exe 328 Console 1 4,060 K
sidebar.exe 476 Console 1 36,108 K
spoolsv.exe 2264 Services 0 9,464 K
taskhost.exe 2272 Console 1 6,072 K
svchost.exe 2332 Services 0 11,252 K
svchost.exe 2524 Services 0 12,836 K
PsiService_2.exe 2572 Services 0 3,052 K
SeaPort.exe 2616 Services 0 7,908 K
WLIDSVC.EXE 2684 Services 0 9,104 K
SearchIndexer.exe 3104 Services 0 19,096 K
WUDFHost.exe 3244 Services 0 5,468 K
WLIDSVCM.EXE 3372 Services 0 2,644 K
wmpnetwk.exe 3452 Services 0 3,772 K
notepad.exe 3600 Console 1 6,096 K
svchost.exe 3876 Services 0 11,480 K
iexplore.exe 2936 Console 1 29,228 K
iexplore.exe 3640 Console 1 59,180 K
wltuser.exe 3704 Console 1 10,016 K
dllhost.exe 2480 Services 0 5,000 K
svchost.exe 2680 Services 0 21,228 K
InputPersonalization.exe 3180 Console 1 1,440 K
wuauclt.exe 116 Console 1 5,516 K
taskmgr.exe 3204 Console 1 9,052 K
iexplore.exe 1872 Console 1 112,188 K
cmd.exe 1048 Console 1 2,936 K
conhost.exe 3012 Console 1 5,200 K
tasklist.exe 4300 Console 1 4,664 K
WmiPrvSE.exe 4340 Services 0 5,352 K -
Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy -
ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA
WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required. -
Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
DetailsAs a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck? -
My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,
my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message
Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
My wifi driver is not working with windows 8.1 in my MBA2013?
My wifi driver is not working with windows 8.1 in my MBA2013?
i installed windows 8.1 with bootcamp, everythigs seems to be working fine except the wifi,
please help me to solve this problem,,
thanksneokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules -
Headphone + 7.1 together not working in Windows 7
Headphone + 7.1 together not working in Windows 7?Dear All
I am having ?audigy 2 ZS platinum and no issues in windows xp recently i tried installing windows 7 so i downloaded the driver from the website.
my problem is in windows 7 im not able to use the both headphone and 7.1 speaker together but in windows xp it works fine and no issues when ever i want to use the headphone just turn off the volume controller it was very & convenient for me.in windows 7 if i set the speaker mode in 5.1 i can hear sound from headphone simaltaneously but not in 7.1 speaker configuration.another annoying thing is that when ever i plug the headphone trebble and bass settings is restored to deafult.every time i have to keep on changing this when changing from 7.1 to headphone
I already tried all the option in eax console regarding heaphone options?
Is there any solution to use both headphone and 7.1 speaker together
Kindly help
ThanksStill i cant use windows 7 because of this issue i would like to correct the administrator its not eax console its creative audio console and i used the default driver which is available on your site.
If i choose 2.1/4.1/5.1 mode i can hear in headphone too but if i switch to 7.1 no sound on headphone.
i love the feature that i can turn of my speaker controller and keep listening in headphone which i use in windows xp with out changing anything and if i need 7.1 just turn on the speaker volume controller.
I came back after months to see any solution still the audigy 2zs platinum rocks -
Flash player not working ie10 windows 8 pro 32
flash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanksflash player not working ie10 windows 8
Default web browser IE10 does not play flash in metro nor in desktop mode on up-to-date W8pro32 laptop
error message "you have to install flash player"
but
I cannot (re-)install latest version of flash player
error message "flash player is embedded in IE10"
I have
reset ie (in advanced options)
turned windows feature ie off (unchecked box) , restarted pc, turned windows feature ie on (checked box), restarted pc
ie10 as default web browser
disabled acticex filtering (tools)
enabled flash player (add-ons)
enabled updates to compatibility view list
Problem started after installing W8pro32 with IE10
Flash plays fine using Firefox W8pro32
Had no problems playing flash on this particular hardware using previous version of os and ie
The macromed flash folder in windows/sytem32 on this PC contains files with exactly same name/size as on other W8pro32 laptop where IE10 plays fash plays without problem
Have asked micsosoft support but not received a reply
Please advise
Thanks -
MacBook Air osx 10.7.5 ... volume not working on some internet videos or songs, on items used before (3wks ago) it has always worked
Is there a volume icon at the bottom of the video window when you move the mouse pointer over to bottom
of the window? -
The volume not working on my iphone 4s
The volume not working on my iphone 4s
I had the same problem as well for nearly 3 months.
I had tried bring the Iphone into my phone carrier and they sent me to the AppleStore. When I brought it to them they hooked it up to the diagnostic machine and they told me just to restart the Iphone from the factory settings.
This didn't work either. To complicate things more, other "solutions" seem to only yield temporary success. These temporary solutions included: blowing compressed air into every port, various restart combinations, various factory restore methods.
I had nearly given up until I stumbled upon a support post on Apple's website that finally yielded success.
http://support.apple.com/kb/TS1630
The solution for me is listed as line 7, which reads:
"Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris."
Apparently, this cylinder shaped, mesh area is in some way tied to what triggers the headphones/speaker selection. I am not sure how, but I can say that after gently brushing it out my sounds are working again; specifically my music is now able to play directly off the speakers and my Iphone apps all play their sounds agian.
Hope this helps you as well! -
Activesync not working for Windows Phone with certificate
We have a new Exchange Server 2013 setup and using activesync. We have setup a policy to require simple password and to send an email to provision a device when it connects. Activesync is setup to use self signed certificates, this was
tested first on the Ipad. Certificate installed entered the settings and the device appeared in the quarantined devices list awaiting to be approved. This was also done on the Iphone and worked.
When putting the same certificate on the windows phone device it errored with there is a problem with {as.domain-name.net} and does not appear in quarantined devices screen.
I tested again with another Ipad and an android device and they work without an issue. Tested with a Windows RT device and got the same issue. If I look in the IIS log files I can see the windows device making a connection then when I presume
to be the error 500 at the end of the line.
This is not a user issue as I can use the same user on the various devices. The windows devices just do not want to connect. We have looked at the certificate but if it works for apple and android devices why does it not work for windows?
Is there any additional security settings that need to be turned on or off for windows phones? Is there something specific on the certificate what windows devices need that others ignore?I did inital think it might be a widows phone issue but there are no other settings for me to use. I have also tested using a windows 8 surface and I get the same issue.
I have raised the event log level on the exchange server to expert and I have seen 2 messages when I try to connect.
I get Event ID 1100: Exhcnage ActiveSync device requests for your uses are being blocked. This problme frequently occurs when HTTP OPTIONS method is not allowed.
I know it is allowed as the test exchange connectivity worked and passed that test.
The other error Event ID 1309 ASP.NET warning. Part of the exception messge is DeviceTypeMissingOrInvalid
I have come across a comment that says for certificates to work you need to use windows intune or SCCM which we don't have. Do we know if this is true? -
Some Flash Builder 4 shortcuts not working on Windows 7
Hi all,
Some of the shortcuts are not working in Windows 7.
E.G. Ctrl + Space does nothing.
Anyone have a solution?Hi Jason,
Here is an example:
Window > Preferences > General > Keys
If I select the command "Content Assist" in the list, the Binding is Ctrl+Space.
This shortcut/binding does not work in the editor, and if I remove that binding and try and set it again by pressing Ctrl+Space, the binding does not appear in the binding field.
If I press Shift+Space, that works, and I can use that binding ok for Content Assist. -
Beats Audio not working in Windows 10
Beats Audio Control Panel software not working after Windows 10 . The Beats sound enhancement is useless in WIndows 10. When i increase master volume HP speaker is getting to 0 or when i try to increase HP speaker volume master is Getting 0and i can not hear any sound.please update the beats audio control panel
Hi,
Please try the following steps which I actually used for my machine:
Go to Device Manager > Sound, video and game controllers
Expand then unistal IDT software
Reboot the machine
After 10 minutes or so, the system will reinstall the right driver for you.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Maybe you are looking for
-
In import process,how excise base value is calculated in MIGO
Hi expert's, In import process,how excise base value is calculated in MIGO,with what referance values get add to base value. waiting for your valuable response, Regards V.raj
-
Adobe Captivate Flash Buttons in Moodle
I am using flash SWF files to control Captivate Course in Moodle and I have trouble with CLOSE pop up window flash button. It works in IE and FIrefox but not in Chrome and OPERA when course is opened via Moodle. I have created simple html page with l
-
Suppose I have a table that has (among other columns) the following columns: LAST_UPDATE DATE, CATEGORY VARCHAR(1) NOT NULL, The statistics of the data are as follows: - CATEGORY can only be one of 5 different values: 'A', 'B', 'C', 'D' and 'E' - The
-
HT1657 Do you need the internet in order to watch a rented movie?
I understand you need the internet to download the movie but then afterwards does it stream the movie or can you watch it at any time without having internet connection?
-
Personnel Number not yet assigned
Dear Gurus I was hiring an employee through transaction PA40. after entering details on first page the employee number was assigned but i did not save the entries due to change in plans. the issue im facing is that the personnel has been generated wi