Diskspace from 5GB to 900MB after Encoding Video and stopping it

I started to make a DVD and it started encoding but i didn't have time and stopped it.. I noticed my disspace went from 5GB to 900MB..
How can i bing it back.. Did iDVD create some file somewhere in my Computer..?
where is it so that i can delete it?

Have you emptied your trash? Do that if you haven't already.
With only 900MB free on your hard drive you are getting dangerously close to a crash. Before working with it any more, I would either delete some unwanted stuff off the hard drive or drag some files over to your external drive to free up more space while you are working this out.

Similar Messages

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

IDVD halts after encoding videos but before audio

I have made many iDVD's of our travel pictures, including both pictures and videos. However, my current iMovie won't complet e the process and always stops after encoding the videos but does not encode the audios. At that point, the gumball just sets there and spins for many hours (overnight, etc.) and when using the "force quit" the drop down says iDVD not responding" in red. I have tried about 5 times with no result. Any suggestions as to what I should do will be appreciated. Thank you. R. L. Anderson, M.D.

Hang in there. This is "Normal." In fact, contrary to what the computer is telling you, the computer is processing the audio.
Adding audio to your iMovie causes this problem. There are two work arounds.
1. Export your iMovie back to your camcorder, then input the movie back into a new iMovie, add your chapters and export to iDVD. The audio encoding may hang up but it will only be for a few minutes.
2. Export iMovie as a Quicktime movie, then reimport the Quicktime movie to iMovie, add chapters, export to iDVD.
If you search this the iDVD forum for "audio encoding" you'll see loads of messages on this topic.

DVD encoded video and audio progressively get out of sync

Hi Compressor professionados,
I've been trying to finalise a DVD I’m creating but keep having the same show-stopping problem where I just can't get the timing of the audio and video right after encoding it to MPEG-2/ac3 for DVD Studio Pro. When I lay it into the track in DVDSPro it plays fine at the start of the track but as the clip gets longer the audio and video gets further and further out of sync, by a few seconds (eg. for over 1 hour length footage).
I've seen similar posts online about timing issues with Compressor but nothing I saw has hit the nail on the head for me. I also posted my problem on Creative Cow but didn't get the help I needed to fix my problem.
Here's the specs:
FCPro X 10.1.4
Video project: 1080i (@ 25i)
Audio 44.1 kHz
Render: Apple ProRes 422
Length: 01:13:05:02
Compressor 4.1.3
MPEG-2 Setting (only what I think is important... or I don't know)
Format: Elementary Stream
Stream Usage: DVD
Retiming: Set duration to: 100% (shows 01:13:05:02)
Video Frame Rate: Auto (25fps)
Field Order: Same as Source
GOP: greyed out at 12
ac3:
Sample rate: 48kHz (the only choice)
Data rate: 224 kbps
DVD Studio Pro 4.2.1
PAL DVD-9 project
From FCP I send my project to Compressor and when I drop both a DVD Audio and Video codec onto it they both show as Retiming 100% (and the length looks the same) but the results are still unsynchronised at the end of the clip when they are placed into the Track in DVDSPro. I've also tried changing different settings, like MPEG-2 Retiming duration to "So source frames play at 25 fps", but I'm still having troubles.
At one point I managed to get the A/V timing right for my track and I then ran what I thought was the same settings for all my other tracks in the DVD but they ended up with a similar outa-sync problem so I deleted everything to try again and realised I'd deleted my good files. And I just can't seem to replicate it again. I’m not sure if it was an accidental mistake that worked or I hit on the right settings. Either way, it shouldn’t be this hard to get it right, for heaven's sake!!!
Also, strangely, when I open the MPEG-2 file in QuickTime Player (10.4) it shows 01:10:30 long but if I open the same file in QuickTime Pro 7 it shows as the correct 1:13:05. And DVD Studio Pro shows 01:13:05:02 for both the audio & video assets but their sync is still out at the end.
This problem stopped me from producing the DVD last Christmas and I tried to pick it up again to give it to the family for this Christmas but ended up having to bail yet again - not impressed!!!
I'm hoping it's a simple solution of getting the settings right but it may also be a bug! Apparently, my bro-in-law has had similar problems and has ditched the DVD route altogether. I already have all of my menus etc. set up and I'd hate to have to ditch all that hard work.
Thanks in anticipation,
Brett

Thanks so much Russ & Tom!
It was as easy as changing the sample rate in the FCP project from 44.1 to 48 and sending it to Compressor again. I think it was set to 44.1 because I had the project set to automatically assign the parameters from the first video dropped into it. I haven't checked yet but the audio from my camera is likely 44.1.
It would be nice if Compressor produced a warning message when you set the codec up for DVD audio that the original is set to a different sample rate & may cause timing problems when resampled to 48kHz.
Anyway, again THANKS lads for solving what has been a year long problem for me and now I can complete my Christmas project, albeit late!
Virtual chocolates to you both!!!

After Sync Videos and music do not play

I did a recent sync with the latest iTunes and my Ipad3.2.2. After the sync the ITunes shows videos and music are loaded. Yet when I try to access on my Ipad it starts to show the library then closes.
I have tried the connect to another computer, the reset, the Restore. Just about everything but the macarena!
Any ideas, Thanks

MacAFP wrote:
Mac OS X / Chrome and Safari
You're dealing with two different plug-ins.
Flash Player (Mac HD/Library/Internet Plug-ins/Flash Player.plugin)
and "PepperFlash" (Applications/Google Chrome.app/Contents/Versions/34.0.1847.116/Google Chrome Framework.framework/Internet Plug-Ins/PepperFlash/PepperFlashPlayer.plugin)
And NetFlix uses the Microsoft SilverLight plug-in.
From SoundCloud support:
Why can't I hear tracks using Safari?
If you can't hear tracks on SoundCloud using Safari, please go to Safari ---> Preferences ---> Advanced ---> and un-check "Stop plugins to save power." Like this:
If YouTube works, it may be doing so in HTML5 mode which requires no plug-in. Do you use Apple's Firewall or (please say you don't) anti-virus?

Iphone 4 will not power up. shut itself down after recording video and attemptimg to send via mms.

Iphone 4 shut itself down about 10 hours ago after I recorded a new video and attempted to send the video via mms. Tried many times to power up using standard power up procedures. I noticed that it seemed to be getting hot. I removed the protective cover and the actual phone was very warm. even after 2 hours it appeared to be overheating. has not been dropped or gotten wet. any solutions? has this happened to anyone else before?

Hmmm, press and hold (about 10sec) the Home and Power button until you see the Apple logo. That restarts your iPhone and should fix your problem.

Bitrate too high after calculating video and audio

Hi,
I have exported a sequence from premiere using a setting of CBR 8.5 with PCM audio.
Using the bitrate viewer I have found out that the bitrate required towards the end of the video peaks at 9348 with an average for the entire sequence being 8297.
Now, I read that the maximum bitrate allowed for DVD is 9.800 so I go ahead and reduce the audio bitrate using an AC3 compression method - reducing the PCM audio to a bitrate of 224.
I am assuming at this point that the audio will be no more than 224 bitrate which by my calculation will be within the DVD specification.
Encore is still reporting that my timeline bitrate is too high.
Any ideas? Does anyone know of a bitrate viewer for audio so I can rule out the bitrate peak for that?
Cheers,
MJ

Just checked the project. It is at a place where I am running a slide show and specifically the Slash Slide transition that caused the largest spike. There are several of these spikes when I'm using this type of transition so there you have it. The transitions are causing the surge in bitrate. Quite annoying really, they last all but a second but cause me to spend another 5 hours re-encoding!
Edit: Thinking about it... if I now set my CBR bitrate to 8 and re-encode will I see the same high spikes? Meaning, will they be as high as my last attempt at 8.5? Seeing that CBR does not actually stay at a constant bitrate this has now got me a little concerned I will have to remove some effects to get decent quality.
MJ

After upgrading, videos randomly stop and restart.

Since upgrading to iTunes 10 purchased videos of TV shows randomly stop and restart. I've had these videos for years and never had a problem, but now every time I watch an episode it sill get around 5 minutes in and spontaneously start the episode over. Anyone else having these problems?

Hi Fabrizio,
why do you want to reboot your server every sunday?????
If you reboot your SAP this often, you'll have performance problems every Monday. All
of your SAP internal Buffers must be filled again after an reboot. If your DB is on the
same Host, also your DB Buffer is empty.
If this is an productive System, i highly recommend you that you not reboot your SAP System this often....
(By side, thats the difference between an *nix and an Windows System.).
What is the reason for doing that?
confused
Regards Manuel

Trying to play videos from my iPhone, i.e; news videos and TED videos. Can hear audio but can not see the video.

Trying to play videos from my iPhone 3G, i.e; news videaos and TED videos. I acan hear the audio but the video is not showing. Any ideas on what I might be doing wrong?

Did you ever solve this. I have not figured it out yet. best.

Is there any possible way to retrieve my photos from my iPhone 4 after a restore and installing the iOS 5 software?

I had several problems downloading the software and plenty of errors. My most recent backup before the update was a day ago. Since downloading the new iOS 5 software I lost all my pictures, and I'm really upset about it. My phone has been synced with iTunes since the restore, but I was wondering if I can get my pictures back?
Any help or suggestions are greatly appreciated!

If you cannot get them by restoring from backup then they are gone.
Why would you update anyhting without making sure that all of your pics were on your computer and backed up?
You should never update/reinstall any software without making sure that everything is backed up.

Embedded Looping Video and stop();

HI
I have embedded a looped video into a flash slideshow where i
use a next and previous button to navigate from one slide to the
next.
My question is can you insert a stop(); command in the frame
where the looping video is placed so i can hold the slideshow on
that slide (until i hit the next button) without stopping the
video?
Any help would be greatly appreciated.

create a new fla with something on its timeline so you can see if it loops and attach:
stop();
to its last frame. does it loop? if yes, zip your fla and attach it.

Adding volume switch to Flash 8 video and stopping it play before it plays

Can anyone help me on how to add a volume bar that works on
Flash 8 video?
I have this script on the video:
myVideo.seekBar=mySeek;
myVideo.playPauseButton=myPlay;
myVideo.volumeBar = myVolum;
myVideo.stopButton = myStop;
I want to add a volume switch to my video.
Does anyone know what I need to get a volume switch working?
I´ve added a volume bar and tried to get it working but it
does'nt.
I also want my Flash video not to start but you have to click
the button 1st to get it to play. Anyone know?

Try this, worked for me:
http://www.adobe.com/devnet/flash/articles/custom_flvcomp_03.html
Also, if you want to initiate the video to start with a play
button, have a fake player(graphic) and a stop action. On the next
frame have your video component set to play automatically in the
parameters, and have the play button you have made to goto the
frame with that component..

Automatic update from microsoft explorer has compromised firefox browser and stopped it from working. How do I get rid of MS update. Already restored to an earlier time, did not work. Firefox is my default browser. Can you help?

Firefox cannot get to the web because the MS update conflicts with my default browser FF. I tried a system restore point before the explorer 9 update, but it didn't clear the MS update troubleshooter with the FF logo and I can not get to my browser directly.

I can't help you with that software in particular but I suggest you to try Xpadder, I also have the microsoft xbox 360 gamepad and it works as far as I know

Cant download anything from the internet, Unknown error pops up and stops me

This is the error message that pops up when trying to download anything:
/Users/jfeiven/Downloads/ could not be opened, because an unknown error occurred.
Try saving to disk first and then opening the file.
It appears when trying to download anything.
Please help!

Take it back to the Apple store. You should not have to deal with anything on a machine that is 1 week old.

Diskspace from 5GB to 900MB after Encoding Video and stopping it

Similar Messages

Maybe you are looking for