Diskspace Requirement for Trex Installation

Hi guys,
I just installed Trex server to one of our systems. It will be used for indexing and searching for our portal system which is running on another server.
While checking Trex 7.0 Installation guide, hard disk capacity took my attention.
On the server we installed Trex server, there is a free space of 30 GB. (Index, Trex and queue directory are on the same partition)
Our KM contains pdf and doc documents total size; 25 gb. In the guide it says; index directory needs approximately half as much disk space as the documents plus the same amount of disk space needed temporarily for the optimization and queue directory needs space approximately three quarters of the disk space required by indexes.
Calculation of disk space required;
For index directory; Permanent size = 25 / 2 = 12.5 GB
Temporary size = 12.5 GB
Total = 25 GB
For queue directory; 3 * 25 / 4 = 18,75 GB
Total space (index + queue) = 43,75 GB
So 30 gb space is not enough for this amount of document.
Is this true?
Any suggestions?
Tolga
Edited by: Tolga Akinci on Nov 25, 2008 9:14 AM

We were facing stability issues. Mapbox is a consultant solution and there's not that much documentation about the "internals", it runs as a Java application inside a J2EE engine and thus has all the implication that comes with that.
The behaviour of that version was indeterministic, mails didn't get through and there were so many places to check, why a certain mail was stuck.
You can run the Mapbox as part of J2EE on i5/OS but I can't state here anything about stability or issues, you'd better ask on the i5/OS forum here
Markus

Similar Messages

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

OS does not meet the minimum system requirements for this installer. 10.6.0 is the minimum required

How do I get my software? This is the message I am hitting before my download will complete:
OS does not meet the minimum system requirements for this installer.
10.6.0 is the minimum required for installation.

Hi,
May I know what are you trying to download ?
What is the MAC OS version you are using ?
It seems you are trying to download an application which needs atleast 10.6 MAC version
I think you are using lower version of MAC, let us know the version of your MAC , in order to help better .
To check the version : click on Apple Button on top left
select about this MAC, you will get to know the version over there.
If its something 10.5.x , then you need to upgrade your MAC in order to install that application which needs 10.6 MAC
Thanks,
Baljeet

Requirement for client installation 9i

Hi;
I want to install Oracle client 9i in the UNIX server (Solaris 2.8). I am searching requirement for this installation, I don't find it...
Can any help me please
Mostafa

Hi,
there is no client-server anymore in Oracle Forms. Its a web only deployment. So 1-2 no longer apply.
3) You need to install Oracle Jinitiator on the client or the Java 1.4 Plugin. Both can be configured for automatic installation.
See the Oracle Application Server documentation and whitepapers on otn.oracle.com/products/forms to learn about how to install and run Forms Services
Frank

Error 1335. The cabinet file 'iTunes.cab' required for this installation is

Ah! Please help! I am freaking out because I can not download the new iTunes becasue I get this message...
"Error 1335. The cabinet file 'iTunes.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with the package"
I am trying to download it directly from the site because I tried to play this song in my iTunes and it said it would not play unless I updated my iTunes.. So it took me to the iTunes website and I download it, save the iTunes Setup to my desktop and try to finish downloading or setting it up and at the end I get that message...
What the deuce? Please please please help.
Dominique.
Toshiba... Windows XP Pro

Search your hard drive for that file, 'iTunes.cab', and delete it. It's corrupted, no good.
Then try to install iTunes again.

How to download packages (Required for 11gR2 Installation)?

Hello
I am not able to download mentioned packages (Required for 11gR2 Installation) Can you Provide link for the same?
SUNWbtool
SUNWhea
SUNWlibC
SUNWlibm
SUNWlibms
SUNWsprot
SUNWtoo
SUNWi1of
SUNWi1cs (ISO8859-1)
SUNWi15cs (ISO8859-15)
SUNWxwfnt
SUNWarc
SUNWcsl
Thanks,
Saurabh

Go examine your Solaris installation DVD.
The packages are there (and should have been installed with a default setup of your OS).

SAP DVD Required for ECC Installation

Dear Team,
I am using OS HPUX and Oracle 10 for ECC 6.0.
Witch -2 SAP DVD we required for ECC 6.0 Installation.
I Have all DVD .Witch-2 DVD i must copy in my Server.
I think
(1) Export 2 DVD
(2) Oracle 2 DVD
(3) Instance IMaster 1 DVD.
(4) Kernal 1DVD
(5) Java_Comp 1 DVD
is Any DVD we required for ECC 6.0 Installation.?
OR
Any DVD I am missing??????
Thanks
Manu

I suggest you read
- the installation Master Guide - which will tell you which DVDs you need for which scenario
- the Installation Guide to find out, which DVDs must be available in parallel
http://service.sap.com/instguides
Markus

Hardware requirement for New installation of R12(12.1) on Linux

Dear DBA's
Kindly advice me the required Hardware, processor and memmory for the following specification for the fresh installation.
100 users.
500GB      Production Database
500GB      Production Application
500GB      Test Instance.
Operating System      Linux.
Application           Oracle Application R12 (12.1)
No RAC and DR setup.
Best Regards,
SG.

Dear Sawwan,
I just want simple for the Fresh installation of Oracle Application R12(12.1) we are expecting the following requirements, can we go with the following.
Users : 100
64 bit processor.
2.75 or higher memory
8 gb RAM
2 servers required 1 tb space and 1 server required 500 gb.
Best Regards,
SG

Minimum system requirements for Aperture installation

I've just downloaded the trial version of Aperture, but it won't install on my G4 desktop running OSX 10.4.8. Looking at this discussion, I'm getting the impression that nothing short of a supercomputer with RAM sufficient for the Cray weather forcasting computer at Bracknell will be sufficient to allow installation of aperture.
I'll be charitable and assume that Apple wouldn't be so daft as to release consumer software that has more demanding requirements than Photoshop, but I'm ready to be disillusioned. How can I find out precisely what the miminum system requirements are?

I'll be charitable and assume that Apple wouldn't be
so daft as to release consumer hardware that has more
demanding requirements than Photoshop...
IMO Apple is not daft, and Aperture most definitely is not consumer software. Of course consumers may choose to use and benefit from Aperture so long as they recognize that it is pro software with pro hardware requirements.
Aperture does have more demanding requirements - referenced to 2006/07 time frame on 2006/07 and earlier hardware - than PS in some ways. E.g., PS fails to take advantage of GPUs for anything other than simple blitting, while Aperture accesses GPU power extensively; hence mediocre graphic cards do not limit PS much but do limit Aperture.
Aperture is a pro application in a new different graphics space than PS. Unlike decade-old PS, AP evolved recently, with the power of 2008 chips and system architecture and beyond clearly in the sights of design engineers.
Managing large batches (hundreds per batch) of large (currently in the 10-40 megapixel each range) RAW DSLR image captures fast is a challenge. As of today Aperture clearly is the overall pro workflow speed king in that process. My guess is that with OS 10.5, Aperture v2, and 2007 H2 pro Mac hardware Aperture will start to really show its competence handling heavy pro workflows.
Pros generally are willing to own the hardware necessary to achieve workflow competency. Consumers have the choice of using a lesser app like Lightroom if they are unwilling to upgrade to strong modern hardware but are willing to tolerate an overall less competent workflow.
-Allen Wicks
17" 2.33 GHz 3 GB C2D MBP, 15" 1.67 GHz G4 PB, DP G4 tower; Nikon D2x & D100. Mac OS X (10.4.8)

Oracle client required for Essbase Installation

Hi
I installed Essbase server and EAS server with foundation services in one Windows Machine.
My RDBMS (Oracle) Is installed on a different Machine.
Do i need to install Oracle client on my Essbase machine to configure with RDBMS? or Oracle Client installation is not required to configure with RDBMS?
Thank you.

You don't need the Oracle client if you want to configure the foundation database as it uses JDBC drivers which are included in the foundation installation.
The Oracle client is useful if you want to set up Oracle ODBC connections to be used with essbase SQL data loads.
Cheers
John
http://john-goodwin.blogspot.com/

Why i cannot install itune on windows 8.1?some dll required for this installation?

Thanks for your help.

Although you're getting a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Help required for Linux installation

Could someone please help me on installing the Java sdk on Suse linux 8? Ive got the rpm but i have no idea how to install it, installing things on linux just boggle me!

go to the shell and do a:
rpm -ivh rmpnamehere.rpm
This works under linux at least and installs java under /usr/java
Best regards,
Bjorn Borresen

Hardware requirement for mapbox installation

Hi,
We would like to install mapbox component on a separate server for groupware integration between CRM 5.0 and Lotus Domino 7.02
Our SAP CRM runs on AS 400 db (E-series system I), would like to know if we have to go with AS 400 server for mapbox too or can we opt for Wintel (Dell windows server)?
Any inputs will be appreciated (ofcourse pts will be rewarded)
Regards,
Anil Kukutla

We were facing stability issues. Mapbox is a consultant solution and there's not that much documentation about the "internals", it runs as a Java application inside a J2EE engine and thus has all the implication that comes with that.
The behaviour of that version was indeterministic, mails didn't get through and there were so many places to check, why a certain mail was stuck.
You can run the Mapbox as part of J2EE on i5/OS but I can't state here anything about stability or issues, you'd better ask on the i5/OS forum here
Markus

Diskspace Requirement for Trex Installation

Similar Messages

Maybe you are looking for