Disksuite and raidctl used together

I have a live Sunfire v440 server with 4 drives and I want to mirror drive 0 & 1 to 2 & 3. The on-board raid controller only allows for 1 live mirror. I was thinking of disksuite, but unfortunately the second disk is just one large partition with no free slices.
I was thinking of using raidctl to mirror the second disk and disksuite to mirror the root drive.
Has anyone done that and if so, did they encounter any problems?
Thank you

Hi Shiva,
Please check this link
[Enhancing IDocs of BAPI-ALE Interfaces|http://help.sap.com/saphelp_46c/helpdata/en/78/21749151ce11d189570000e829fbbd/content.htm]
[Maintaining the BAPI-ALE Interface|http://help.sap.com/saphelp_nw04/helpdata/en/18/22b812773211d396b20004ac96334b/content.htm]
Re: BAPI and IDOC relationship
Best regards,
raam

Similar Messages

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Can i use JSF tags and HTML tages Together

i am trying to use html and JSf tages together. i hope it should owrk. but for me html tags are not working.
can any one help me

thanks
its working but i have one more clarification
can we wuse jsf tags in javascript
for examp
this my javascript using html
newQuotCell1[0].innerHTML='<input type=text class=TextField name="nameofEmployer'+count1+'">';
if i want to write a jsf tage there . does it allow
i want to bind the textfield with bean value . Is it possibel.
please let me know.
thansk in advance

Can I use bluetooth speakers and wired speakers together

Can I use bluetooth speakers and wired speakers together?

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

Am I able to use a federal employee discount and student discount together when buying a new computer?

Am I able to use a federal employee discount and student discount together when buying a new computer? I work for the government, but am also a full time student at a university. I was wondering if anyone had any experience with that and knew if you were allowed to do this?

No. Since I have friends working at Apple, I can get an employee discount. Since I'm also attending school in Asia, do you think I can get an employee discount AND a student discount?

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

How can i use the SNMP and TCP/IP together in Labview?

I want to use the SNMP and TCP/IP together in the Labview to communicate between the two computers, If anyone know about it , please write back.
Santosh Chavan
IIT MADRAS.

You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

Cannot use styleName and fontStyle property together in Label?

Hi All,
I am using Label component with the following attributes set,
see code 1)
but in my CSS I defined the style myStyle as below see code
2)
Here I am trying to use embed a font and use the style in the
Label.
I want the other styles to be given seperately like italic
and bold using "fontStyle" and "fontWeight" properties of a Label.
see code 3)
The problem here is that,
If I introduce any of these "myStyle" is not working. I mean
that the font which I embeded is not implemented. Its taking its
own default font. But If I remove fontStyle and fontWeight
"myStyle" is working properly.
I hope I had made my problem clear.
Any help would be appreciated.
Thanks.

"COKFlex" <[email protected]> wrote in
message
news:[email protected]...
> Hi Amy and Greg, Thanks for your replies.
>
> Yes I knew that I can use the fontstyle and fontwidth in
my CSS. Before I
> proceed next, let me explain you about my requirements
and why I am using
> embedded fonts.
>
> My requirement is to have all the font related styles as
configurable from
> an
> Xml file like .
>
> <Text>
> <Forecolor>#FFFFFF</Forecolor>
> <Backcolor>#000000</Backcolor>
> <Fontname>TimesNewRoman</Fontname>
> <Fontsize>30</Fontsize>
> <Fontstyle>normal</Fontstyle>
> <Fontweight>normal</Fontweight>
> </Text>
>
> Which I can read at run time and apply the styles.
>
> Ok Now I am coming to the need to using embedded fonts.
If I didnt embed
> the
> fonts the text displayed in my application are not
smooth. But its smooth
> if I
> use embedded fonts. {It is possible if we install the
fonts from the
> Windows CD
> [Control Panel->Regional Language and
Setting->Language Tab->Supplementary
> Language support] options>} But I observed that few
system doesnt have
> that
> installations. So the fonts which I am trying to use in
the configuration
> xml,
> even though the system has that font, its not appearing
smoothly in my
> application.
>
> ok, so next I decide how I make the embedded fonts as
configurable. I gave
> the
> fontname as the stylename and give that stylename in the
configuration xml
> as I
> mentioned in my previous post.
>
> And I implemented that using styleName="<value read
from the config xml>"
> which inturn refers the stylename I used in the CSS for
the embedded font.
>
> As I mentioned earlier, all the styles I want it to be
configured, I
> cannot
> give italic or bold in the CSS style instead it has to
be read from my
> config
> XML.
>
> So I decided to use the fontStyle and fontWeight
properties of the Label.
> So
> then the problem comes, if I use stylename and fontstyle
together,
> fontStyle is
> actually overriding the styleName's embedded font and
applying style as
> italic
> but not with the embedded font which ultimately results
in not giving me a
> smoother display.
You can actually change the CSS declaration itself. But I
think you will
also need to embed the other forms of the font if you want to
use them.
HTH;
Amy

HT1277 Can you use Apple Mail program Rules and Gmail filters together?

Can you use Apple Mail program Rules and Gmail filters together? Does the gmail filtering override the Mail Rules?

Mail > Window > Previous Recipients

Can you use Apple TV 1 and Tv 2 together And what is the best setup

Hey guys
Can you use Apple TV 1 and Tv 2 together?
And if you can what is the best setup with teh two devices above and the need to hook it to one TV.
Thanks in advance.
-David

Welcome to the Apple Community.
If I understand correctly you want to use both the Apple TV's with one TV.
There wouldn't be a problem with that, they will each need there own network connection and should be connected to different AV inputs on the TV so that you can switch between each Apple TV as a source with your TV remote.
If you don't have two HDMI ports on the TV, the Apple TV 1 will connect by component cables, if this isn't possible you would need to get yourself an HDMI switch.

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Ipad will not turn on the screen is just black, using the hone and power buttom together does not fix it

my ipad screen is blue, using the home and power buttons together do not fix it.

If you can't reset it by holding the power and home buttons at the same time until you see the Apple logo, then releasing, connect it to your charger for at least 15 minutes then try resetting it again If it won't reset make an appointment with the Genius bar at a nearby Apple store to have it looked at.

HT204136 Restoring from iCloud and iTunes backup used together

How would I restore my iPhone if I'm doing iCloud and iTunes backup together? The articles lists that as an option, but when it comes time to restore, can't you only pick one to restore from?

Here are a couple links that might help you decide
iCloud: iCloud storage and backup overview
http://support.apple.com/kb/PH12519
About iOS and iTunes Backup
http://support.apple.com/kb/ht4946

I have an iPhone and i used to be on a joined account with my mom. I am now trying to get on to my own account but i want to keep the music and apps that have already downloaded with my mom's account. How can i do this?

Hi my name is Scott,
I'm trying to get my old information (apps, music) from my iphone that was previously on a different account to sync on a new account. I just got a new macbook pro and got a new account to go with it. Now i have tried to homeshare the accounts and drag the music over to download it onto this new account but i can't get the homesharing to work because it says the password doesn't match even though i have used the same one to log on and off of homesharing on my mom's account. I have recently tried to back up my phone onto this new account and it asks if i want to authorize it and asks for the password for my mom's account. I have the password but i am hesitant to authorize it with my mom's apple ID and password because i don't want her account to be on this computer. I want it to be my own account just with my personal music from my iphone on it. I dont know if it will just sync my iphone's information to my new account or just add my mom's apple ID account to my itunes on my computer. What should i do to get my information from my iphone from my mom's account onto my new account? Thank you

That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.

What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language.

Disksuite and raidctl used together

Similar Messages

Maybe you are looking for