Diskutil Repair Permissions Time

When I was running Tiger on my 20" iMac G5 (non-isight) I could run Repair Permissions on my 500GB HD in under a minute, it seemed.
Now, running Leopard (10.5.8) it takes at least 10 minutes or more each time. What's the deal with that ?
Have any of you noticed that, or is it just me (as is often the case) ?
Walt

Klaus, you can see my specs below, but I just did a clean install with a 10.5.4 Leopard dvd, and I noticed that using disk utility, I can't seem to get it past the "reading" stage. I went a head and used SU to get all the available updates, zapped the prame, booted into safe mode, restarted and then tried DU with it getting stuck there (the progress bar keeps doing the barber shop thing). In fact, I let it run and a Kernal panic popped up. I am a bit concerened since the the inital install of 10.5.4 disk utility wouldn't finish. You said yours takes 40 mintues? Any suggestions on this end? I am going to next try and boot into safe mode and repair. But, I only have MS Office2008, Flip4Mac, and ClamXav installed as 3rd party software.

Similar Messages

  • REpairing permissions - very time consuming - why ?

    Hi Forum
    After installed leopard my Diskutility takes several minutes to repair permissions.
    Any suggestions to why ?
    yours
    Bo
    Ps. I've made an upgrade from a clean Tiger 10.4.10

    Bo,
    Beginning is very RAM-demanding: on my iMac G4 it takes more than 40 minutes!
    We don't know yet whether this is temporarily "clumsy" state of the new young OS.
    Let's hope there will be something implemented in the next free updates,
    and let's hope the confusing and worrying strange messages will disappear too.
    Safe enough tip to kill time:
    Do not interrupt the process, but you can use Safari while it is running.
    Axel

  • I have downloaded Mountain Lion and Time Machine says that my Free Agent Goflex (Seagate) external 2gb drive cannot be used as it is read only. I tried disc utility to repair permissions but that block is greyed out. The disc verifies as being OKI

    Since installing Mountain Lion, Time Machine says says that my Free Agent Goflex (Seagate) external 2gb drive cannot be used as it is read only. I tried disc utility to repair permissions but that block is greyed out. The disc verifies as being OKI What next?

    Ok, I solved this problem! I ejected the drive and then disconnected it both from the power supply and the USB connector. I then reconnected everything and powered it up again and Then went into TM preferences and chose the drive as the backup. TM did a new backup (well over an hour) and now works as advertised.

  • Repairing permissions takes a long time!!

    Ever since upgrading to Leopard I've found that repairing permissions takes a long time (30 to 60 minutes), and repairing the disc takes even longer. I've recently run the Apple Hardware Test - everything passed, then ran a 3rd party memory test ("Memtest"), and everything was "OK", and I used "Leopard Cache Cleaner" to clear all the caches, but still it took 18 minutes to verify permissions, then 22 minutes to repair them, which seems a long time to me. The blue progress bar goes immediately to about 10% saying estimated time is 1 minute, stays there for about 15 minutes then progress actually starts. Can anyone advise?
    Tim

    Yes, RP has been problematic since 10.5.0. We're all a bit frustrated...
    You can speed the process by not choosing to "Verify" permissions. Just run the "Repair" permissions, no need to verify also, you're just doing extra work.
    -mj
    Message was edited by: macjack

  • I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well

    I purchased Adobe Acrobat Pro XI for my iMac (Mavericks 10.9.4), downloaded it and have attempted to install it 10 or more times. I have done all the usual maintenance steps (repair permissions, repair disk, etc) and it still won't install. All goes well until the installer gets to "Running Package Scripts" then it stalls or hangs up and does not finish the installation. It runs and runs and runs. It never finishes. I wind up having to force quit the installer. Can anyone point me in the right direction?

    Hi jtento ,
    Kindly enable the Root Account for the MAC and then try the installation there (in the root account). Please find below the URL to enable the root account.
    OS X Mavericks: Enable and disable the root user
    Thanks,
    Vikrantt Singh

  • Repair permissions Error: The underlying task reported failure on exit, ever since time machine system restore

    Recently had to restore system 10.5.8 Leopard startup volume using Time machine. After many hours of migrating additional important databases that were recovered from failing startup drive, everything seemed to be back up and running smoothly on a new WD 1tb Black drive. Right before I run timemachine again to backup the new revised seemingly stable startup volume, I choose to repair disk permissions using disk utility. Repair permissions failed with this error, The underlying task reported faliure on exit. I tried using the OS X DVD to repair permissions, Diskwarrior, Onyx, none are able to reapair the disk permissions. Although everything seems perfect I would imagine that the system will fail eventually. It's strange that I had no problems repairing disk permissions in the past on this particular system that was the most recent backup. What should I do ?

    Repair permissions always reports a bunch of stuff.  Ignore it if it says it completed successfully.
    Also note that is it usually a waste of time (except maybe after a system upgrade). 

  • Every time i repair permissions i keep getting this same message...

    Perhaps i'm being paranoid, but every time i repair permissions i keep getting this same message that:
    "Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources/ DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
    Does anyone know what this means? Is anyone else getting these messages consistently when running repair permissions? i did a clean installation of Leopard and have run the updater. Permissions seem to take a while to repair, and i am going to install the larger 10.5.1. updater as soon as it finishes downloading... but i did run the 40 mb updater that software update downloaded.
    Any insight would be helpful. Thanks in advance.

    This is the only trouble if at all that I have in installing Leopard, and while some as discussed previously are nothing to be concerned about the others have me concerned. From the installation disk I have run Disk repair and Repair Permissions but nothing changes in the list below. So any thoughts on how to clear some out?
    Repairing permissions for “iMac HD1”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    ACL found but not expected on "System/Library/User Template/English.lproj/Sites".
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    ACL found but not expected on "System/Library/User Template/English.lproj/Desktop".
    ACL found but not expected on "System/Library/User Template/English.lproj/Documents".
    ACL found but not expected on "System/Library/User Template/English.lproj/Downloads".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Application Support".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Assistants".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/MIDI Drivers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Components".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/Digidesign".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins/VST".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Alerts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds/Banks".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Audio".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/ColorPickers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Compositions".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Favorites".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/FontCollections".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Fonts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Plug-ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie/Sound Effects".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/iMovie".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Input Methods".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Internet Plug-Ins".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Preferences".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Printers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Screen Savers".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Sounds".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Voices".
    ACL found but not expected on "System/Library/User Template/English.lproj/Library".
    ACL found but not expected on "System/Library/User Template/English.lproj/Movies".
    ACL found but not expected on "System/Library/User Template/English.lproj/Music".
    ACL found but not expected on "System/Library/User Template/English.lproj/Pictures".
    ACL found but not expected on "System/Library/User Template/English.lproj/Public".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
    Permissions repair complete

  • Looooong Time To Repair Permissions

    Brand new machine so I'm just learning it. Repair Permissions first reviews the Permissions Data Base. This takes 4 1/5 minutes by the clock. That seems a very long time. Is it normal? Then, it takes 2 min to repair even though it found nothing to repair. Again, is that normal?

    OS X stores file and folder permission and ACL settings in the /Library/Receipts/db/a.receiptdb file.
    Mine contains about 90mb of info. It may contain more than double that depending on optional
    packages installed. If you would like to see whats in the file, drag a copy of it out on your desktop
    and open it with Pacifist (don't try to open it in its default location, its permission setting won't
    allow it). After looking at the contents, I think you will see why it takes as long as it does to repair
    permissions.
    Kj

  • Repair permissions finds same stuff EVERY TIME-insane amount

    so EVERY SINGLE TIME i do a 'repair permissions' on my main HD, THIS shows up... any ideas? what happened? it's a new install, new machine, 10.6.8.
    see the LAST LINE as well.
    this happens even if i just did a repair.
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

    You're welcome.
    Please note the items listed under Legend in the right sidebar of this page.

  • Every time I repair permissions, shows itunes problems

    Since the last update every time I run the repair permissions process, it shows that have problems with all the languages on itunes.

    John H54 wrote:
    Permssions repair has always been recommended as a standard proceedure to help diagnose another persistant issue with Mac OS: the ever present Beach Ball  (with no decipherable causes) ...
    It has been recommended by people who misunderstand its purpose and its method. It's never been an effective tool to solve any beach balling issue, despite all of the folklore to the contrary.
    I see no check box in Disk Utility to engage an option to ignore permissions irregularities that "are not a problem"
    Unchecking the "Show details" box above the progress window will do that. Better yet, don't bother repairing permissions at all unless it is for a task for which it is an appropriate tool.

  • Repairing permissions taking long time (onyx)

    I know this isn't really a snow leopard question but I'm repairing my permissions with onyx and it's taking longer then it's ever taken before. Should I let it continue?

    OnyX is almost certainly doing the same thing as Disk Utility. It's handy to have several things all brought together in one app, but at least in this case, it's very doubtful there's any other benefit.
    If repair permissions runs very slowly, there are a few possible causes:
    Other things running that are using a lot of your CPU and/or disk access.
    Problems with the +File System+ on your disk. When you start OnyX, one of the things it does (unless you cancel) is a +Verify Disk.+ If you haven't let it do that, do so. If that reports problems, see #6, especially the yellow box, in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of this forum).
    Problems with your internal HD. Try running this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509]. Run the Extended tests.

  • HD Not Accessible to Repair Permissions

    Hello. I hope you can help me isolate the error that is keeping my Intel iMac G5 from booting properly. I’m running 10.4.
    It froze after I’d been backing up onto DVD/dumping old data (about 20GB worth). Whenever I tried restarting the screen would freeze on the grey apple logo, sometimes with the swirly icon.
    When I ran Disk Utility off the install disk at first it indicated “error detected” on mass storage, but later said it was fine. But I could not run Repair successfully (I kept getting "repair failed" messages), and the Repair Disk Permissions button was not accessible (greyed out).
    I could not startup in safe mode. And if I tried to restart in DU the only option was a Network (which I'm not hooked up to).
    Once I got a Kernal panic screen but most of the time it was just a grey apple with the fan hitting 900 rpm.
    Finally I ran DiskWarrior and in 15 minutes it had cleaned out and rebuilt my HD. I thought I was home clear.
    However, even though Disk Utility now says my HD is fine, it still does not allow me to Repair Disk Permissions - the option is greyed out. And if I boot up pressing Option to select a Startup Disk, the rebuilt drive is not one of them.
    It appears my /Library/Receipts folder is empty.
    What’s more, if I try to run an admin command in Terminal, like
    sudo diskutil repairPermissions /
    I get the message:
    -bash: sudo: command not found
    In fact, any way I try typing sudo I get a “command not found” message, even if I try to run other command like chmod.
    When I type:
    Users
    I get
    Users: command not found.
    So I typed:
    Echo $PATH
    And get
    /bin:/sbin:/usr/bn:/usr/sbin:/usr/libexec:/System/Library/CoreServices
    I’m not sure at this point whether the fact that the DiskWarrior-rebuilt drive doesn’t show up among Startup options (when I boot with option key) is because of missing/broken permissions; an empty /Library/Receipts folder; missing users; or a missing path.
    Any and all help is appreciated. Thank you.

    Oy. I purchased an external drive and began installing Mac OSX onto it, so that I could then migrate all files from the unbootable hard drive before running an Archive & Install. That part seemed to go smoothly. But a few problems have emerged:
    1. Though I was prompted to keep Disk 2 of the install ready, it never asked me for it, even though I ran the installation 2 or 3 times. Consequently while I can select the external drive when booting up command-S, I can only see Install window, Disk Utility or Terminal windows - never a desktop, preferences drop down, help menu, finder, all the things I'd typically see when launching my machine. Is this normal? Is there a way to force it to install only disk 2 if it has things it needs for full bootable GUI / access?
    2. Booting up with the install disk, in disk utility I can see both drives but still cannot repair permissions on my affected HD. I tried via Terminal (repairPermissions, chmod or chown) commands; I keep getting error messages (command not found).
    3. Switching cd / to my new drive in Terminal, I was able, I think, to change permissions (755) but when I open Disk Utility the drive is still not writable and "Repair Disk Permissions" is still grayed out.
    4. I could not open Migration Assistant on the new drive via Disk Utility, so I copied it from the HD into its own folder on the new one, but am really confused about the whole Disk Image thing. If I create a new disk image and try to open it, convert or checksum it, it still is grayed out, I can never just open it. I tried running commands in Terminal to run that application on the external drive, pointing to the new folder, to the .app, to the contents, .dmg, and no commands seem to work, I keep getting the command not found message.
    If I just run the A&I, I fear I'll lose my data which is why I wanted to migrate everything over before I did so. But if the user / owner permissions are screwed up and the only way to fix them is A&I, I don't know what else to do.
    Is there ANY way to boot from the install, run Migration Assistant from the external drive (either through Disk Utility or Terminal) and copy all files from HD? If not, I guess I'll have to cross fingers and A&I.
    Gee, I used to love my Mac ...

  • Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

    Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
    I closed out a program and got a message that the temp file could not be stored/saved.
    Then a Kernel panic message occurred and restart was necessary.
    The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
    Attempted Safe Mode start up, unsuccessful,
    Single User Mode-sucess.
    Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
    No change in start up attempts
    Started with install CD matching current OS 10.6
    Ran Disk Utility Repair Permissions resulting in multiple errors:
    One line/error
    Warning: SUID file /////Ardagent has been modified and will not be repaired
    144 lines/errors of this type of series of lines
    Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
    permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
    unable to set owner and group...error 22: Invalid Argument
    unable to set permissions on...error 22: Invalid Argument
    Ran Repair Disk, result:
    Error: Could not unmount disk (in red)
    Ran Verify Disk, result:
    The volume HD appears to be ok (in green)
    Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
    Error message box
    Volume Erase failed
    Volume Erase failed with error:
    Could not unmount disk
    I am looking to solve without buying DiskWarrior unless only resort.

    So it looks like  solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
    diskutil disablejournaling /dev/disk0s2
    diskutil disableownership /dev/disk0s2
    diskutil repairPermissions /dev/disk0s2
    then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

  • Repairing permissions without effect

    Hello,
    I tried to repair with diskutility and tried to repair with Techtool Pro 5; Three times in succession and every time the report looks like the others.
    a
    Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root/Library/Preferences“ erwartet.
    German; in english perhaps: The acces-control-list was found, though not expected for.....„“ “
    b
    Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root/Library/Preferences“ erwartet.
    c
    Die Zugriffssteuerungsliste wurde gefunden, jedoch nicht für „private/var/root/Library/Preferences“ erwartet.
    a
    Die Zugriffsrechte unterscheiden sich für System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CodeResources, Soll-Wert: -rw-r--r-- , Ist-Wert: lrwxr-xr-x .
    German; in english perhaps: The permissions differ for ... , the state should read .... , is .....
    b
    Die Zugriffsrechte unterscheiden sich für System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CodeResources, Soll-Wert: -rw-r--r-- , Ist-Wert: lrw-r--r-- .
    c
    Die Zugriffsrechte unterscheiden sich für System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CodeResources, Soll-Wert: -rw-r--r-- , Ist-Wert: lrw-r--r-- .
    What means the l in front of the notation?
    Thank you,
    Karl

    The acces-control-list was found, though not expected for
    That means the item has a list on it which specifies who can do what with it but the repair permissions mechanism wasn't expecting one. Ignore those messages too.
    (45367)

  • Repairing Permissions in Disk Utility (10.7 MBPro 2.4GHz), but still slow! Any advice upon reading my output?

    Current scenario:
    2-yr old up-to-date Lion 10.7 on my MBPro Intel Core 2 Duo 2.4GHZ upgraded RAM to 6GB is suddenly showing sluggish startup and opening applications very slowly (non Pro Apps and Pro Apps alike)…when multiple apps are open simultaneously (simple stuff like: Safari, Photo Booth, etc) and I have a handful of tabs open in Safari, I am getting slow response in every category from time it takes to open an application, all the way down to simple keystroke delays. This is becoming really annoying and having a direct negative effect on my ability to be efficient and multitask! so I zap the PRAM a few times using the startup key combo, and try running DiskUtil to repair permissions. But alas, I seem to get the same thing each time after repair/verifying permissions a couple times… my output pasted below.
    My QUESTION: I know from articles I've read on this discussions board that I can all but ignore the output lines like "ACL found but not expected on…" but is there anything in the output i've pasted below that I should be worried about? Anything that might be pointing to a bigger problem?
    I also startup in singleuser mode and run /sbin/fsck -fy once every 10 days or so…is this the right thing to do? My overall speed and efficiency is not improving. Please lend me your infinite knowledge, apple gurus. Thanks!
    Verifying and repairing partition map for “ST9250315ASG Media”
    Repairing permissions for “Macintosh HD”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Repaired “Library/Preferences/com.apple.alf.plist”
    ACL found but not expected on “private/var/root/Library”
    Repaired “private/var/root/Library”
    ACL found but not expected on “private/var/root/Library/Preferences”
    Repaired “private/var/root/Library/Preferences”
    Permissions repair complete

    You can ignore the SUID messages > Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore and that has no effect on speed.
    Not enough free space on the startup disk can slow the system down.
    Click your Apple menu icon top left in your screen.
    From the drop down menu click About This Mac > More Info then select Storage from the menu.
    Make sure there's never less than 15% available disk space.

Maybe you are looking for

  • Upgrade Error phase STARTSAP_NBAS

    Hi all, I am upgrading from 47-200 to ECC6 on SQL server. I am using downtime minimized. I am having issue in STARTSAP_NBAS phase with error : "System start failed code 02, test RFC did not work, try to log on to system with user DDIC" When I am tryi

  • Where can I get more information about User exits?

    Where can I get more information about user exits,their related Tables and the source code of an User exit? Thanks

  • A Urgent error in  Start-of-selection

    Hi,Experts, My report is  is working fine in dev and QA but in production system it is  going out of start of selection when I execute .see the code below. In production also if execute se38 from menu program execute it is working but if I click the

  • Timeout error in Wait for Operation Complete VI for TEKDPO4054 scope driver

    Hi, I keep getting a timeout error (-1073807339) when I run the "wait for operation complete" sub-VI that comes with the tektronix DPO4000 series oscilloscope driver. I'm using a DPO4054 scope. The error out source is the VISA Read STB command, but I

  • TestStand 4.1 with Windows 7

    When I launch TestStand with administrator rights, I have the following error : Unable to access the TestStand configuration directory... The solution is : change the directory specified in the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Nati