Diskwizard (os9) needs to run on Intel Mac Pro

I have a new mac pro at my work and everyone else has powerpcs so they can run os9. The program only runs in os9 so i need to find a replacement or an application that can import the files.
Any Suggestions?

See — Disk Wizard
"If you’re looking for a replacement for Disk Wizard, you may want to check out CDFinder, because it is able to import your existing catalog files."
However, I have no experience with either application.
No Alibi.

Similar Messages

Intel Mac Pro w/10.4.7 - I need to access a 2003 Western Digital hard drive

Hey another question for the gurus of Mac out there. Got an Intel Mac Pro running 10.4.7 and I need to access old information from someones else's Western Digital (internal/ external w/case) drive. It's a "WD1200JB-00RCA1" model drive from 2003. I've already tried using the case with firewire connection on both my laptop and Mac Pro, but it will not mount. I does get power though. I'm thinking of trying it internally, but know that the Mac Pro is picky about specific types and specs on drives. Just curious if anyone thinks I can make it work internaly without screwing up the drive or more importantly, the Mac Pro.
Apparently this same drive was used internally on a mac back in 2003, but obvioulsy an older Mac. Any tips appreciated.

That drive (according to WD) is a WD Caviar SE 120GB UDMA 100 IDE drive. Assuming everything is set-up correctly, external enclosures typically require the drive to be jumpered as and IDE master, then it should mount.
The fact that it doesn't mount is not a good sign.
You could try this internally in the spare optical drive bay - you'd need a 5.25" to 3.5" mounting kit. If I were to go this route, I'd disconnect the optical drive temporarily - the cables will reach better and you stand less chance of getting an IDE bus incompatability with the optical drive.
I think the default set-up for the MacPro IDE bus is Cable Select so you may need to look into jumpering the drive dor this (CSEL)

When will Quicken run on Intel Mac without Rosetta?

I've been holding off on buying Quicken for my mac mini. Anybody know when Intuit will release a version of Quicken that runs on Intel Mac without needing Rosetta? Thanks,
Owen

Kappy,
I just looked at the Quicken Support site:
https://quicken.custhelp.com/cgi-bin/quicken.cfg/php/enduser/stdadp.php?p_faqid=4014&p_created=1137099411&p_sid=9RFCSgti&p_accessibility=0&p_lva =3793&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MSZwX3Byb2RzP Tk1LDU1MSZwX2NhdHM9JnBfcHY9Mi41NTEmcF9jdj0mcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1pbnRlb A**&p_li=&ptopview=1
This is what it says regarding Quicken 2007 for mac in response to the question "Tell me about running Quicken on the new Intel based macs":
"Quicken for Mac is not a universal binary program and will not run natively on an Intel based Mac. All Intel based Macs come equipped with Rosetta software that enables non-universal binary programs to run on Intel Macs. There are no known issues specific to using Quicken 2006 and later on an Intel Mac with Rosetta."
What is the source of your info? Thanks,
Owen

Will CS3 run on intel Mac?

Getting a new mac pro and wondered if CS3 will install on it okay? Might be a stupid question, but i figured if CS5 wont load on my powermac,maybe cs3 wont work on the newer setup. I ordered CS5 for it,but the print setup is not as nice as CS3 in my opinion.

How soon are you getting a new Mac (pre or post Lion)?
CS3 runs on Intel Macs now with the current kitties. Lion may be another matter.

Power Supply Temperatures Running Hot! Mac Pro shuts down.

Hello,
First I will give machine/hardware specs of interest:
2 x 3 GHz Quad-Core Intel Xeon (pre 2009)
8 GB 800 MHz DDR2 FB-DIMM
NVIDIA Quadro FX 5600 (running 2 displays)
Apple RAID Card/Controller
SMC Version: 1.25f4
*venting dimensions around computer: top=18", left side=3", right side=3" and back=18".
Software of interest currently running:
OS X 10.5.8
iStat Menu
SMC Fan Control
My machine has been shutting down spontaneously and I suspect either CPU or power supply overheating. In the 5 instances this has occurred, the room was very warm (AC was not on) and I was running HandBrake with CPU at full and an iStat reading of 145 F. Ambient was 77 F and I was not reading power supply temps at the time. I figured for sure this must be a CPU overheating issue. However, just a few hours ago I had another shutdown. The room was warm again but I was not running Handbrake, but StarCraft II. I have played a lot of Starcraft II with no problems until tonight.
I decided, this time, to check the temps on my power supplies. Power supply 1 = 147 F, and #2 is at 178 F. After many hours of searching forums I have concluded that these are crazy hot temps! I immediately installed SMC Fan Control to attempt to increase the fan speeds. I was successful in increasing all fans except the power supply (stuck at 599rpm). I have now turned the AC on in the house and the Ambient is down to 70, PS #1 145 and PS #2 169. All of these temps are a result of and idle machine running a browser.
The following may or may not be an issue, however, leave no stone unturned. I currently have 12 external devices running on USB. 4 WD passport drives, 1 DVD writer, 5 WD powered drives plus the keyboard and mouse. Also, the Mac Pro is plugged into a small UPS.
In all my forum searches, I just can't seem to answer some basic questions:
1. Can an overheated power supply shut the system down?
2. What are optimal (normal) running temps for Mac Pro's? (everyone seems to have opinions, but there doesn't appear to be a technical specification anywhere).
3. I thought the fans, especially CPU fans, were supposed to kick in when the heat rises. Why are mine staying at minimal rpm's?
Finally, does it look like I need new power supplies? Fans?
This machine was put into service in March of 2008 and has done very intensive rendering for the film industry...long nights...rendering for days sometimes. It has been retired for over a year now and is used at a lesser degree.
Thanks for reading this long post! I appreciate any input you can provide!
Other iStat reading of interest:
Power Supply 1 voltage = 12.28 V
Power Supply 1 current = 26.44 A
Power Supply 1 power = 316.75 W

Also, the Mac Pro is plugged into a small UPS.
Put your peripherals on that.
Don't share the same circuit for A/C as the Mac Pro, and put the Mac on 1300VA UPS at least.
As for all those external drives.... I'd consolidate into a good SATA case or two.
And yes in summer run with 3 of the fans up around 900 rpm.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Game controller for intel Mac pro

Any suggestions for a game contoller for an intel Mac pro? I've had no luck with tatieboggle or with the Logitech f710 wireless. Running latest system. Thanks!

For three years I have been trying to get a reliable connection with the F710 for each OSX update. The macgamepads.com and tattiebogle.net solutions do not actually work for extended gaming experiances. In short OSX is lacking REAL controller support. And as long as I have had my Mac Pro it has always been that way.
There is a reason why people don't play games on Mac. I have a SSD drive dedicated entirely to Windows 8 Bootcamp because playing even the most simplistic game on a Mac is a god **** nightmare. You want the F710 to work? Get a PC or run Bootcamp - DON'T PLAY GAMES IN OSX.

Do i need a antivirus for my mac pro?

do i need a antivirus for my mac pro?

do i need a antivirus for my mac pro?
At this time, you do not need it. There are ways that your Mac can get infected, but anti-virus software will not necessarily protect you, and certainly won't protect you better than other measures you could take instead. When it comes to anti-virus software, you have to balance the benefit of an added layer of security against the liklihood of problems caused by running anti-virus software, and have to also consider the effectiveness of the anti-virus software. See my Mac Malware Guide for more details. If, after reading that, you decide that you would like to use anti-virus software as an added layer of security, use one of the programs it recommends.

Final Cut Pro 5.1 on Intel Mac Pro

Hi,
I have been running successfully Final Cut Pro 5.1 on my intel Mac Pro.
Suddenly it stopped working. While opening, it suddenly quit. Tried to fully uninstall Final Cut following Apple HOWTO and reinstall. Unfortunately, Final Cut is still not working.
I have read lots a various messages and no-one seems to have a 100% success rate.
Anyone has a suggestion?
Cheers
Ben

someone posted something on Craigslist about the intel Macs and he said that the intel just freezes up with FCP and some other programs
Older versions of FCP do NOT run well on IntelMacs because they were written to run on PPC chipped Macs only. Probably the situation you read about on Craigslist. The OP here is running the universal version of FCP so that shouldn't be an issue in this case.
-DH

Cannot access yahoo mail on my intel mac pro

hi i can access my yahoo email on my laptop using safari which is in power mac g4 but cannot do the same on intel mac pro can please someone suggest a cure?
When i enter user id and password while using safari to access email on yahoo mail using my laptop i do not have any problems. However, when i repeat the same using my mac pro safari seems to get me into yahoo mail but asks me repeatedly for my password and does not get me into my mail box.
Do i need to adjust my safari preferences or trash some files from the library? please help

I have had this problem for 2 days, where my yahoo Inbox says it is updated, but hasn't, then gives me "Cannot connect to mail servier" error message. If I go to my various folders (other than inbox) they will all update.
Very frustrating. All other email accounts work fine and only the inbox in yahoo seems to have this problem.
If anyone figured out how to fix this, then let us know. Thanks
I'll try yahoo support forum next and see if they have anything on this.

Will firefox 5 run on a mac pro running snow leopard

I like FF but am concerned whether it will run on my mac pro running snow leopard, since the download information says it is a windows program.

Snow Leopard being Mac OSX 10.6
You need to download the version for Mac, not the .exe which is for Windows.
www.mozilla.com or if you prefer a certain language no given then look at http://www.mozilla.org/en-US/firefox/all.html and look down the middle which is Mac OSX.

I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Deve

Hi,
I need help! Do I need to have a MacBook/Mac Pro to submit/distribute an app game in Apple Store? I hired a designer and developer to do it for me..should be done next week.I have an Ipad.Is Ipad going to be just fine?I know I have to sign up for the Developer Program(I started that..though not finished yet)My developer will walk me thru submitting it.Please help.
Thanks,
sheapps28

You'll need a Mac with a support OS X and tools to complete the process.

My recent purchase of QuickTime 7 Pro for Mac OS X upgrade doesn't do "screen record" on my Intel Mac Pro with system 10.6.8. Apple won't accept responsibility and refund my money.

My recent purchase of QuickTime 7 Pro for Mac OS X upgrade doesn't do "screen record" on my Intel Mac Pro with system 10.6.8. Apple won't accept responsibility and refund my money.

QuickTime 7 doesn't offer that, but the built-in QuickTime X Player does. You may find another use for the key.
(109709)

Trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro

I'm trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro, but they crash the app every time. files saved 2006 and later load OK. Anybody shed any light on this or know of a fix (other than the laborious work-around of re-saving all early lso's in logic 8 on the PPC and physically moving them via a portable drive to the new machine)?
(BTW, those files also crash the Logic 7 installed on the intel Mac.)

Upon further work with my migration, I find I was incorrect in the time frame assertion of these failed files: apparently, the creation/modification dates have nothing to do with it and the reality is that some files fail at random, while others load just fine. right now it looks to be about 50/50 Beats me why this is.
Anyway, for those interested, I've discovered a very helpful key to the quick processing of file data for a plethora of files (i. e. re-saving the "bad" lso files as Logic 8 projects on the older CPU and moving them over to my new machine), and that is the 'control key/launch' of the app. I hadn't realized that Apple had added this feature to Logic to enable easier work on multiple song files when one does not require the audio.
For those who don't know about it, the 'control key/launch' provides an option to disable the core audio at app start-up, thus allowing files to load instantly without loading the plug-in library files associated with tracks - great for copying MIDI data between song files, or in this case, re-saving a batch.
Still puzzled, though, as to why so many older lso files crash Logic when they attempt to load on my new CPU.

FCP, Intel mac pro crashing

SO here is the set up
Dual 2.66 Intel mac pro, 4gb ram, system drive is 500gb, AV drive is over fibre channel.
OS is 10.4.8 FCP 5.1.2
all is fresh install on new system, working good for the first week.
The issues are when I go to render out I get maybe to 75% then the system crashes, get the screen that tells me I have to hold down the power button etc.
The project file contains 1 stream of DV footage and 1 Livetype movie, seems to not like the live type, but crashes with or without it, just faster with.
On a side note a second issue has been trying to burn to dvd, it will crash the same way, after completeing 25-50%, making coasters.
this isuue is present in both machines we have which are identical.
I also have one of them with the loud fans, straight out of the box, reminded me of my old g4 dual 1.25 mdd.. Firmware is up to date on it. Both machines are new within the last 2 weeks.
here is the crash report.
Date/Time: 2006-10-17 15:35:14.346 -0500
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
Command: Final Cut Pro
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [60]
Version: 5.1.2 (5.1.2)
Build Version: 3
Project Name: FCPApp
Source Version: 609211640
PID: 244
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x000069b0
Thread 0 Crashed:
0 com.apple.FinalCutPro 0x0000a424 VEFrames2TimeCode + 292
1 com.apple.FinalCutPro 0x00020c86 DispatchHashDict(KGDictSelector, KGDictInt*, KGDictParams*) + 4336
2 com.apple.FinalCutPro 0x00105e53 KGDictTransferC(KGDictInt*, KGDictInt*, KGDictTransferType, Path*, Path*) + 177
3 com.apple.FinalCutPro 0x00105e8c pKGDictTransfer(KGDictInt*, KGDictInt*, KGDictTransferType, ...) + 50
4 com.apple.FinalCutPro 0x0034cb75 pKGClipNewFromItemsFull(KGDictInt**, KGItemSpec*, double*, long, KGClipNewFlag, KGDictInt**) + 10939
5 com.apple.FinalCutPro 0x0034d3dd pKGClipNewFromItems(KGDictInt*, KGItemSpec*, long, unsigned char, unsigned char, unsigned char) + 153
6 ...Pro.Plugins.Timeline Editor 0x08aac6bf TLSetCenterFrame(TimelineViewRecord*, unsigned char, long) + 16843
7 ...Pro.Plugins.Timeline Editor 0x08abcec6 TLShowReelDupes(KGDictInt*) + 3878
8 ...Pro.Plugins.Timeline Editor 0x08ad6d2d DisposeMenuStrings() + 53723
9 com.apple.FinalCutPro 0x001108a2 pKGDragMouseMove(KGPoint*, KGDragRefRec*) + 826
10 ...FinalCutPro.Plugins.Browser 0x0866c7db ComputeLayoutInfo(BrowserRec*) + 7745
11 ...FinalCutPro.Plugins.Browser 0x08671c39 ComputeLayoutInfo(BrowserRec*) + 29343
12 com.apple.FinalCutPro 0x00275c43 PPassMouseEvent(KGPanelRecord*, KGDictInt*, long) + 1483
13 com.apple.FinalCutPro 0x0027ed91 pKGPanelMessage(long, long, KGDictInt*, KGViewRecord*) + 97
14 com.apple.FinalCutPro 0x0023049d ServicesPanelsMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 109
15 com.apple.FinalCutPro 0x00231773 BrowserMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 101
16 com.apple.FinalCutPro 0x002753fb pKGPanelWindowProc(long, long, KGDictInt*, void*) + 53
17 com.apple.FinalCutPro 0x0028a09b pKGSendWindowMessage(KGWindowRec*, long, long, KGDictInt*) + 93
18 com.apple.FinalCutPro 0x00140353 HandleMouseDown(OpaqueEventRef*) + 2443
19 com.apple.FinalCutPro 0x00140b47 DoEvent(OpaqueEventRef*, KGDictInt*) + 685
20 com.apple.FinalCutPro 0x003cd341 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 69
21 com.apple.HIToolbox 0x92dd686b DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1093
22 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
23 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
24 com.apple.HIToolbox 0x92ddd683 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1169
25 com.apple.HIToolbox 0x92dd6c22 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2044
26 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
27 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
28 com.apple.HIToolbox 0x92e210c7 ToolboxEventDispatcher + 81
29 com.apple.HIToolbox 0x92e1fadf RunApplicationEventLoop + 165
30 com.apple.FinalCutPro 0x0013cfb4 KGMainEvent(void*) + 46
31 com.apple.FinalCutPro 0x0028dccf main + 59
32 com.apple.FinalCutPro 0x00002fc6 _start + 228
33 com.apple.FinalCutPro 0x00002ee1 start + 41
and
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x000069b0 ebx: 0x00000001 ecx: 0x30ef9a21 edx: 0xbfffdab4
edi: 0x20d211b0 esi: 0xbfffdc6c ebp: 0xbfffdad8 esp: 0xbfffda9c
ss: 0x0000001f efl: 0x00010246 eip: 0x0000a424 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
any help would be mucho appreciated!
cheers
-David

So I was getting prepared to reinstall the OS and all the software, decided to dig a bit more first. Looked at this log
Wed Oct 25 12:43:48 2006
panic(cpu 3 caller 0x003A1D25): getPhysicalSegment() out of 32b range 0x1001fd000, len 0x1000, class IOGeneralMemoryDescriptor
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47c03398 : 0x128d1f (0x3c9540 0x47c033bc 0x131df4 0x0)
0x47c033d8 : 0x3a1d25 (0x3ed64c 0x1fd000 0x1 0x1000)
0x47c034a8 : 0x39f8b1 (0x6f27380 0x0 0x47c034ec 0x3bc21c)
0x47c03508 : 0xc8deff (0x64747a0 0x6f27380 0x0 0x5ed230b8)
0x47c03578 : 0xc7c50b (0x6472600 0x64af500 0x0 0x1a1ec0)
0x47c035a8 : 0x5fa88b (0x651e300 0x7033900 0x47c035cc 0x47c035c8)
0x47c035d8 : 0xc38cec (0x651e300 0x7033900 0x0 0xc39020)
0x47c03648 : 0xc3646c (0x6525c00 0x6f27380 0xde5e868 0x0)
0x47c036c8 : 0x51a020 (0x65a8380 0x6f27380 0xde5e868 0x0)
0x47c03768 : 0x51d38b (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c037e8 : 0x522da1 (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c03888 : 0x522e48 (0x0 0x0 0x47c038f8 0x1ef607)
0x47c03898 : 0x1ef607 (0x5a8cf820 0x200ba9 0x0 0x1)
0x47c038f8 : 0x1c0a02 (0x47c039d8 0x47c03954 0x16 0x62f0a2c)
0x47c03998 : 0x2fab82 (0x6e35c60 0x47c039d8 0x47c039e8 0x1bf216)
0x47c039b8 : 0x1e4362 (0x47c039d8 0x47c039c8 0x4d2200 0x63a3604) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOSCSIBlockCommandsDevice(1.5.1)@0xc35000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
com.ATTO.driver.ATTOCelerityFC(2.4.1)@0xc7f000
dependency: com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a1000
com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Common on both machines, both macchines have the ATTO Celerity PCI Express card for the fibre channel. So I went to ATTO's site looking for new drivers and found this
"ATTO's UL5D and Celerity PCI Express adapters will work in the MAC Pro, however; there is a temporary issue with the systems containing 2.5 GB or more RAM. Please limit the RAM to less than 2.5 GB until this can be resolved. Also, ATTO Configuration Tool version 3.6 will not function properly. Please watch our web site for solutions to both of these issues after 10/21/06."
So tomorrow I will bring both machines and hook back up to the terrablock and try it out with 2 gb ram rather than 4gb.
By looking at this panick log, am I right to assume because I see the ATTO in the log it could be the issue? Looking in google for anyone talking about this I found 1 where they said the temp issue as ATTO put it is a freeze/bomb issue. I will hopefully be able to check it out tomorrow, if I get out of training soon enough.
Any more input is always welcome.
Thanks

Diskwizard (os9) needs to run on Intel Mac Pro

Similar Messages

Maybe you are looking for