DISM reports corruption, repair-windowsimage states HEALTHY

I have been working a several Windows 8.1 systems regarding issues. Some state out of memory (which it does not have), just black screen when sitting for a while. I have run dism /online /cleanup-image /restorehealth which consistently states it fixed "component
store corruption was repaired" but never does. The powershell cousin to the command (repair-windowsimage) states "Image Health State" is HEALTHY. I know the commands have very minimal differences and believe they execute the same exe but runs
just a bit different.
HELP!

Hi willrow,
Basically the Repair-WindowsImage command is under DISM Cmdlets so there is no difference.
I think you might have little misunderstand about dism /online /cleanup-image /restorehealth
This is a command which perform a whole system components repair but not a health checking.
The health checking command is dism /online /cleanup-image /checkhealth
and I think it will give same result with PowerShell.
Regards

Similar Messages

WebI Report Corruption on BI 4.1 SP 1 Patch 7 : An internal error occured while calling 'openDocument' API WIS 30270

Hi All,
We are facing some weird WebI report corruption issues.
Issue is specific to only one report so far. We have seen this issue usually when we save the report to enterprise or do Save as.
Report gets corrupted at both the places; local and in repository.
The report have 5 Tabs, 3 queries from same database, Cross Tab, and approximately
15 Dimensions and around 500 Measures (From 3 Queries same universe and database)
Variables: 70 Measures and 10 Dimensions (created on report level)
Error Message while opening the report:
This error is generic. however there is no relevant SAP note for this on SMP. Even in trace I could not find much relevant details:
Please find the logs attached for WebI rich client tool.
Note: Change the extension of attached file to .zip and then extract
Thanks
Satish

Hi Jen,
Thank you for the response.
I am using WebI rich client in offline mode without connecting to CMS; still the working report crashes after making some changes while saving it. (we do refresh reports here)
Secondly, APS is already split and we have enough resources on the server, which anyways are not being used so far.
Even in logs do not see any instance for insufficient memory or crashing message.
Only connection server will come into picture when we use Rich Client all other task will be done be Rich client itself.
Thanks,
Satish

Report in which collect statement .

report in which collect statement is used and also its purpose.

COLLECT
Basic form
COLLECT [wa INTO] itab.
Addition
... SORTED BY f
Effect
COLLECT is used to create unique or compressed datsets. The key fields are the default key fields of the internal table itab .
If you use only COLLECT to fill an internal table, COLLECT makes sure that the internal table does not contain two entries with the same default key fields.
If, besides its default key fields, the internal table contains number fields (see also ABAP/4 number types ), the contents of these number fields are added together if the internal table already contains an entry with the same key fields.
If the default key of an internal table processed with COLLECT is blank, all the values are added up in the first table line.
If you specify wa INTO , the entry to be processed is taken from the explicitly specified work area wa . If not, it comes from the header line of the internal table itab .
After COLLECT , the system field SY-TABIX contains the index of the - existing or new - table entry with default key fields which match those of the entry to be processed.
Notes
COLLECT can create unique or compressed datasets and should be used precisely for this purpose. If uniqueness or compression are unimportant, or two values with identical default key field values could not possibly occur in your particular task, you should use APPEND instead. However, for a unique or compressed dataset which is also efficient, COLLECT is the statement to use.
If you process a table with COLLECT , you should also use COLLECT to fill it. Only by doing this can you guarantee that
the internal table will actually be unique or compressed, as described above and
COLLECT will run very efficiently.
If you use COLLECT with an explicitly specified work area, it must be compatible with the line type of the internal table.
Example
Compressed sales figures for each company
DATA: BEGIN OF COMPANIES OCCURS 10,
NAME(20),
SALES TYPE I,
END OF COMPANIES.
COMPANIES-NAME = 'Duck'. COMPANIES-SALES = 10.
COLLECT COMPANIES.
COMPANIES-NAME = 'Tiger'. COMPANIES-SALES = 20.
COLLECT COMPANIES.
COMPANIES-NAME = 'Duck'. COMPANIES-SALES = 30.
COLLECT COMPANIES.
The table COMPANIES now has the following appearance:
NAME SALES
Duck 40
Tiger 20
Addition
... SORTED BY f
Effect
COLLECT ... SORTED BY f is obsolete and should no longer be used. Use APPEND ... SORTED BY f which has the same meaning.
Note
Performance
The cost of a COLLECT in terms of performance increases with the width of the default key needed in the search for table entries and the number of numeric fields with values which have to be added up, if an entry is found in the internal table to match the default key fields.
If no such entry is found, the cost is reduced to that required to append a new entry to the end of the table.
A COLLECT statement used on a table which is 100 bytes wide and has a key which is 60 bytes wide and seven numeric fields is about approx. 50 msn (standardized microseconds).
Note
Runtime errors
COLLECT_OVERFLOW : Overflow in integer field when calculating totals.
COLLECT_OVERFLOW_TYPE_P : Overflow in type P field when calculating totals.

"The WmiSE service has reported an invalid current state 0." error continuouls fatched on server 2008 R2.

hello support,
i am using window server 2008 R2 as a web server.i saw error "The WmiSE service has reported an invalid current state 0." in system logs of event viewer, and also continuosly fatched.i want to know why it gives such kind of error and how i can
solve it.

Hi,
Based on your description, I guess that you get Event ID 7016. For this Event,
If a service is not coded correctly to appropriately handle control calls from the Service Control Manager (SCM), the SCM may log this event -- with a invalid current state value of zero (0). For more details, please refer to following article and
check if can help you.
Event ID 7016 — Basic Service Operations
If anything I misunderstand or any update, please don't hesitate to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Macbook Air froze/turned it off to restart. Now it won't restart it goes to Gray screen with apple like it is loading, but when gets to the end it turns off. Try repairing it states incorrect number of thread records.Volume Macintosh HD found corrupt

Macbook Air froze/turned it off to restart. Will not restart just goes to gray screen like it is reloading and then shuts off. Have tried everything. When trying to reapir it says incorrect number of thread records, should be 108456 instead of 108455. Invalid voume directory count/the volumbe macintosh HD was found corrupt and needs to be repaired. How do I repair it?

Hello cgstephen
You would need to contact Apple or an Apple Authorized Service provider by checking out the page below. It will have everything you need to know about setting your MacBook Air up to get it repaired.
Service Answer Center - Mac notebooks
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=Macn otebooks
Regards,
-Norm G.

Scheduled report corruption

Hi, we have been using BO Enterprise 11 for sometime without any problems, but recently scheduled reports are being produced with varying format issues. Sometimes a report is OK, but the next time it runs the layout of the report will be corrupted.
Correct:
     Analysis of Open MCR Changes, by Logging Category not assigned to a Release
     Open Changes     Logged today
     Logging Category :     C MCR CANDIDATE      65      1
     Logging Category :     C MCR CHANGE      3      1
      68      2
     Analysis of Open MCR Changes, by Logging Item not assigned to a Release
     Logging Item:     MCR ORDER MANAGER SYSTEM      16
     Logging Item:     MCR WEBSITE LIVE      16
     Logging Item:     MCR ORDER PLACEMENT MANAGER SYSTEM      4
Incorrect
     A
     Open Changes     nalysis of Open MCR Changes, by Logging Category not assigned to a Release     Logged today
     Logging Category :     C MCR CANDIDATE      65      1
     Logging Category :     C MCR CHANGE      3      1
      68      2
     A
     nalysis of Open MCR Changes, by Logging Item not assigned to a Release
     MCR ORDER MANAGER SYSTEM      16
     Loggi
     MCR WEBSITE LIVE      16
     Loggi
     MCR ORDER PLACEMENT MANAGER SYSTEM      4
     Loggi
Any thoughts?
Andy

The problem is that, as Kappy says, the backup software cannot know the files have been corrupted. Hard drive damage - a frequent cause of corruption - can be repaired, but only an application that can read a particular file might know if it has been corrupted, and even then it might not be apparent until you notice errors in the data that the file should contain.
The only way to protect against corruption is to:
1) Keep incremental backups, like Time Machine does
2) Keep a minimum of two _completely separate_ backups
3) Use two different backup programs (I like Time Machine + [Carbon Copy Cloner|http://www.bombich.com>)
4) Archive important files periodically to CDs, DVDs or additional hard drives and store them away somewhere cool, dry and dark and don't touch them again. Note that, even stored properly, they dyes in home-burned CDs and DVDs will eventually degrade and destroy the data they contain, so don't rely on these for seriously long-term storage.

Disk utility intermittently reports corrupt disk

As a matter of routine maintenance I like to "Verify Disk" in disk utility from time to time.
The issue I am having is that disc utility intermittently identifies that the Server drive is corrupt and needs to be repaired. Here is a typical sequence:
1) Run verify disk and it reports a corrupt disk.
2) Boot up off a different disk and re-run verify / repair disk on the problematic disk and it reports that the disk is fine.
3) Boot up on the original (problematic) disk and re-run verify disk and it reports the disk as fine.
4) Checking again the next day the original problem resurfaces - disk is corrupt.
The server appears to be running fine, but I am loathe to have an issue like this potentially simmering in the background. I am also averse to upgrades until this issue is resolved. Any pointers on getting this resolved would be much appreciated.
Coincidentally, I have run disk warrior and it reports no issues.

Here is the typical disk utility log when reporting the error:
Verifying volume “Server”
Verifying volume when it is mounted with write access.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Incorrect block count for file kdc.log
(It should be 91 instead of 92)
Incorrect number of thread records
Invalid leaf record count
(It should be 1567637 instead of 1567636)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Volume bitmap needs minor repair for under-allocation
Checking volume information.
Invalid volume file count
(It should be 684309 instead of 684308)
Invalid volume free block count
(It should be 47746895 instead of 47747031)
Volume header needs minor repair
The volume Server was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.

Importing Crystal Report layout for customer statements

Hello,
I have imported a crystal report layout to use for the customer statements when running them from the ageing report. The problem is even if we only select one business partner in the ageing report, when we print preview the statement it displays statements for all business partners - this is because in the crystal report there are no parameters. I know that when you import a layout like this for other documents you need to use for example, {ORDR.DocEntry}={DocKey@} as the parameter however the customer statements don't have a docentry. When I look at the system statement layout (collection layout), when you run the report you get an ADO.NET (XML) connection prompt. Is it possible to use the crystal layout i have for the customer statements but for only the customer(s) showing on the ageing report?
Many thanks,
Kate

So just to make it clear,
you want an overview of open invoices from 1 customer.
If so, try this in crystal reports :
Create a parameter field (field explorer)
Name : CardName
Type : String
Value : Static
do not select a value field (none)
press ok.
Select expert
Create new
Starts with
type this : {?CardName}
press add
Click formula editor and make it look like this :
{OINV.DocStatus} = "o" and
{OINV.CardName} startswith {?CardName}

Is there a report Override for AR statement print in Report One Manager?

I have created an AR Statement in Crystal and would like to use this report in the AR Aging-->Statement(one page per customer). I don't see an Override for A/R Statements. Does one exist?
Never mind. I found it. Collection Report.
Edited by: Pat Frohlich on Jun 9, 2009 4:22 PM

Hello Bill,
You might find the report in the following location to be helpful:
Home>Application Builder>Application XXX>Application Reports>Shared Components>Application Database Object Dependencies
Regards,
Arie.

Question on "Get Reporting Statistic" and If statement issue

Hello
I worked up a "Get Reporting Statistic" in my script that looks for agents that are in the Not Ready state.
Report Object:    CSQ IPCC Express
Field:     Not Ready Resources
Row Identifier:    Queue_Name
Result Statistic:    Not_Ready_Resources
I have an If then statement:
If(Not_Ready_Resources <1) then
True - go to a prompt
False - go to the queue
It seems like this is behaving backwards. When I am logged in on my agent it seems to follow the True step which it should go to the queue. When I am logged out it goes to the false step, to the queue.
Any thoughs on why it would behave backwards?
thanks

Apologies, replying via the email interface is a bit annoying.
Your code is a tad confusing to begin with. Why are you checking to see if there are people in the not ready state before trying to queue?
Instead a cleaner flow would simply queue first, play the prompt and any other actions in the queue step. This way your person is immediately placed in the queue and if someone is available they go straight to them otherwise they will hear your prompt. If I am understanding your code properly, the if statement is unnecessary.
Regardless, why are you checking for agents not ready? (I'm honestly curious). Is there something more specific that needs to happen if an agent is not ready? Otherwise, your flow should be checking for Agents in the ready state
if(Agents_Ready > 0)
     true:
          queue
     false:
          prompt
but again this is entirely irrelevant considering:
Select Resource Step
     queue:
          prompt
          // no available agents
     connected:
         //agents ready
Perhaps I am completely misunderstanding? Apologies if that is the case.

Interactive Report Download and Session State Protection

I have created an Interactive Report in an APEX application that I have enabled
session state protection for. The issue I am having is with the "Download"
functionality of the interactive report to a .csv file.
The URL created by selecting Download from the drop down (javascript:gReport.controls.download();)
is built or constructed without a checksum thus causing the error below.
Error
No checksum was provided to show processing for a page that
requires a checksum when one or more request, clear cache, or argument
values are passed as parameters.
The anchor tag containing the URL (/f?p=app_id:page:session_id:CSV:) is contained within
<div id="apexir_CONTROL_PANEL_DROP" class="drop_panel
clearfix" style="">
Running the following: Application Express 3.1.0.00.32 on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Is there a way to add a checksum to this? OR does anyone have any ideas on how to work around this?
Edited by: Bryce Tuohy on Feb 26, 2009 10:08 AM

WORKAROUND:
1.) Create hidden ITEM on page (I named it P23_PREPARED_CSV_DOWNLOAD_URL).
Enter the following for the ITEM
as the SOURCE_TYPE : PL/SQL Function Body
as the SOURCE: return apex_util.prepare_url('f?p=&APP_ID.:&APP_PAGE_ID.:&APP_SESSION.:CSV:')
2.) Create BUTTON that executes javascript to open POPUP window with this url.
a.) Create Button and enter
<a href="javascript:popupURL('&P23_PREPARED_CSV_DOWNLOAD_URL.')">Download and Save to CSV file</a>as the "Text Label/Alt"
Originally had custom code for javascript POPUP and this is not needed .... just use the APEX javascript function.
Edited by: Bryce Tuohy on Mar 5, 2009 10:47 AM

Exchange 2013 SP1 Object is corrupted and inconsistent state after Lync 2013 Installation

Hi Fellows,
I am facing an issue with Exchange 2013 SP1 (5.0.847.32)
environment. I recently installed Lync 2013 (version: 5.0.8308.0) a week ago and just recently start getting the below error when configuring delegation or modifying the users/groups from Exchange Control Panel:
"The Object <object DN> has been corrupted, and it's in an inconsistent state. The following validation errors happened:
The access control defines the ObjectType <object guid> that can't be resolved.."
I can see some forum threads with same issue (links given below) but unable to find if this is a known issue and how to get it resolved. Need assistance if anyone has faced same and could help me out to figure it.
http://social.technet.microsoft.com/Forums/exchange/en-US/72310530-d1de-4b39-a0fb-1592247df03f/access-control-entry-issue-after-installing-lync-2013-into-the-forest?forum=exchangesvrdeploy
http://www.networksteve.com/exchange/topic.php/Issue_with_exchange_2013_lync_2013_intergration/?TopicId=37192&Posts=2
J.A

Hi
Usually the affected SID objects are referring to deleted objects.
Use the PsGetSid tool to try to resolve them.

How to send report output from SUBMIT statement

Hi,
I need to develop one report whcih can be use to send any report output in mail as attachment in txt of execl format. So i will be using SUBMIT statement to execute the report in my new report and i need to convert the reportout in txt or excel format and need to send as attachment in mail. This new report can be use to execute any report which may have ALV GRid, Normal outout screen. So what could be the best way to develop this kind of report.
Br,
Piyush

>
piyush mathur wrote:
> Hi Suhas,
>
> LIST_TO_ASCI will give me data in lines. and its difficult to separate the columns in another internal table for attachment file. As this report is going to use to send any report output so i can not fixed the delimiter. So i am looking some function which can split the data in columns when I am reading from List.
> Br,
> Piyush
No need to seperate nothing additionally, this will come automatically in the attached file. Draft below
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT your_report EXPORTING LIST TO MEMORY
              AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
DATA string_tab TYPE list_string_table.
"use table type appropriate for attchement
DATA ascii_tab TYPE soli_tab.
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
   listasci                 = ascii_tab
   listobject               = list_tab.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename = 'C:\test.txt'
    filetype = 'ASC'
TABLES
    data_tab = ascii_tab.
DATA go_email_doc TYPE REF TO cl_document_bcs.
go_email_doc = cl_document_bcs=>create_document(
                                      i_type = 'TXT'
go_email_doc->add_attachment( i_attachment_type = 'TXT'
                              i_attachment_subject = 'My Attachment'
                              i_att_content_text = ascii_tab ).
Regards
Marcin

Disk Utility reports minor repair required - how risky is this?

I was verifying permissions the other day and thought I'd check the hard drive as well. When running the verify hard drive it stopped with an error report as follows:
Volume Header needs minor repair
The Volume Macintosh HD needs to be repaired
Error the underliying task reported failure on exit. 1HFS volume checked. Volume needs repair.
The Macbook seem to be running fine. Should I run the repair or leave it. Someone once told me that if the Disk Utility fails to repair the problem it can leave the disk unusable. Any truth in that?
Thanks
Michael
iMac G4 15" flat screen : MacBook 1.83 (Tiger) Mac OS X (10.3.9)

Directory structure issues can lead to freezing, general slowness, startup issues (computer may not startup all the way), Applications or files may not open.
It is usually suggested to repair the disk with Disk Utility that came with the computer or a disk utility that is compatible with the operating system that you are using.
Here are some articles from Apple's knowledge base. Some are technical:
http://docs.info.apple.com/article.html?artnum=302411
http://docs.info.apple.com/article.html?artnum=13628
http://docs.info.apple.com/article.html?artnum=7565
http://docs.info.apple.com/article.html?artnum=19516
Directory structure issues usually are not HW issues, but is the way the computer or OS, stores/sorts information on the Hard drive.

CATS report RCATSP01: Problem with statement IMPORT FROM MEMORY ID.

Hi Guys,
I am trying to create a Z custom report using SAP template RCATSP01. In template report there is an IMPORT statement as below.
IMPORT icatsd
catsfields
fieldtab
FROM MEMORY ID 'LR2'.
When I run the report in debug mode, I found there is no data in ICATSD, CATSFIELDS & FIELDSTAB.
What should I do to get the data in these internal tables.
Thanks,
Mini

I don't think this report is meant to be used as a stand-alone report; it's called within CATS time entry (e.g. CAT2 when user select print time sheet) which would export the info to 'LR2' memory prior to calling this report.

DISM reports corruption, repair-windowsimage states HEALTHY

Similar Messages

Maybe you are looking for