Disney Gnome Village doesn't work after installing the new iso 6 upgrade

Just updated the new iso6 and the Disney Gnome Village applications does not open up. Have tried uninstalling and then reinstalled with no change. Other applications are working fine. any ides?

From the developers: " Gnome Village We are aware that players who have updated their device software to iOS6 are experiencing loading issues. We are actively investigating this issue and hope to have it resolved soon. If you have encountered this issue and would like to submit a ticket, please be sure to include information about the device you have been playing on. Example: iPad 2, iOS 6."

Similar Messages

  • My telus email no longer works after installing the new os Yosemite

    my telus email no longer works after installing the new os Yosemite

    This is a problem between Telus and Yosemite.  Telus, of course, blames Apple. 
    Check the box that says "Allow insecure authentication"  That will get your email working.
    However, this box will get un-checked when you stop start Mac Mail.  The next time you start Mail, you'll have to re-check it for each Telus account.  (This is the bit that Apple needs to fix.) 

  • Unable to print after installing the new Quicktime upgrade

    I can not print to my Epson printer after installing the new Quicktime upgrade on my PowerBook G4 (1.67 GHz, OS X Version 10.4.11). I have re-installed the driver from Epson (several times), and have safe booted and reset my permissions but it will not print. My printer is a Epson Stylus Photo R1800. When I print, it just gives me this message... "Looking for Printer 'EPSON Stylus Photo R1800' "

    Latigna, welcome to Apple Discussions.
    Here's a similar problem on the same Epson printer. http://discussions.apple.com/message.jspa?messageID=8928421
    Also look at Troubleshooting printing issues in Mac OS X
    http://docs.info.apple.com/article.html?artnum=106714
     Cheers, Tom

  • Camera app doesn't work after installing a new screen

    I have been fixing broken iPhone screens for quite some time now but have never come across something like this. After installing a new screen the camera app won't show the camera and the shutter never opens. I thought I didn't put one of the cables in right so I double checked and sure enough they were in good. I restored the phone and tried it again with no luck. I then switched out to another screen I found and the camera worked perfectly. This is so bizzarre to me but can anyone explain to me what is wrong? Or what has happened? I have never seen anything like this.

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Console Features doesn't work after install the 02.08.0004 driver for Audigy 2

    Hi,
    I cannot use those console features(e.g fail to load EQ icon on the taskbar) after I install the 02.08.0004 driver. Is anyone know how to slove this problem?
    Thanks.

    Have you tried to reinstall the softwares?

  • Why is my internet not working after installing the new iTunes version on my PC?

    Last night I installed the latest 11.1 iTunes on my PC and now I have not network connection. So when I restored my PC I have internet but no iTunes and it's becoming one vicious cycle!!!

    Ok, after a bit of a freak out and a calming husband - he looked up the answer.  View "ios6 crash update" in the search bar; or click on the link.
    Good luck!  I'll be curious to know how long it takes until it crashes again - but this was the first time it's crashed since I've owned it.
    It's my favorite toy!

  • My iPhoto doesn't work after installing lion?

    My Iphoto doesn't work after installing lion.
    it suggest that I have to instal iphoto again.
    where can I find this

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

    Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
    The system shows everything is ok.
    Please any help greatly apreaciated.
    Thank you
    Valentin

    ValentinT, welcome to the forum.
    There are no drivers available for Windows 8.  I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected.  It seems that the Sound is one area that gets changed when updating to Win 8.1.  At least, this is what happened to me.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my Macbook pro late 2013 touch trap has its own mind. Any others with this problem? What should we do?
    Even I tried to get back to Maverick but the touch pad doesn't work again. well, it works for a couple hours then start doing things but its own. it is so annoying.

    Hello josefromlaie,
    Thank you for using Apple Support Communities. 
    The following article provides some effective steps to troubleshoot trackpad issues:
    Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
    Regards,
    Jeff D. 

  • After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

    My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
    From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
    I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
    I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

  • How can I get my safari to open after installing the new Mavericks operating system?

    How can I get my safari to open after installing the new Mavericks operating system?

    Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure

  • Why has the sound gone all of a sudden after installing the new iOS 5.0.1?

    I have had the iPhone 4s since the time it was released in the uk, u had no problems with it, it's network coverage was pretty good, the loudness of the speakers was good ad the battery would last me an entire day, now after installing the new ios 5.0.1, my sous has gone, I can't hear the music playing, I can't here te clicks and the tap sounds when touching the phone, the only time it makes sound is when I make a call and I can put it on loud speaker, other than that there's no sound coming from te loud speaker, oh yeah Siri seems to be working fine. Do aby of you people know what's wrong and if any of you lot are going through the same problem or any other problems since tbe update to ios5.0.1, apple you need to get this sorted as the speaker is important to some of us if not all and it would be great if you could sort this out and any other problems caused by this update and to allow the phone to work and operate the way it should, thanks!

    Hi Guys,  I FIXED IT!!!!
    I have post eariler on this forum and as you know I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine. 
    Cheers

  • Anyone getting the constant pop saying to sign in with itunes up on their 4s after installing the new software?

    Whenever I open an application I get this annoying pop saying to sign in with itunes up on their 4s after installing the new software?  You have to press OK to make it go away but sometimes it doesn't and I have to reboot my phon

    have you signed into your Itunes account as it is asking?
    i received the same prompts and also to my icloud account and once i signed in all prompts went away
    If you have an icloud account you can now simply back up from your Iphone4 and not use your computer anymore

Maybe you are looking for

  • J2EE does not start anymore : shell service error

    Our J2EE 640 SP16 doesn't come up anymore. Into the std.dispatcher.out we see this : "Service security started. (5 ms). service shell ================= ERROR ================= Cannot start service telnet; it has hard reference to service shell which

  • Note for PCPRVBR1

    Hi all, I have a problem in a include PCPRVBR1. In line 'IF ( aper-begda  <  br_termn_date OR' the correctly is 'IF ( aper-begda  le  br_termn_date OR'. Anybody knows what to do, do we have any SAP Note for it? tks Marcos

  • HT3529 when we go to text the send button is not green

    can't text, send button is not highlighted.

  • How to verify i cloud account

    my apple id is verified in gmail but not verified on icloud

  • Still need some help.. Please!

    I´ve tried to do the tree component transparent so that I can see the background thru it but it doesn´t seem to work. Do any one know how to do??