Disobey the user profile date setting in module pool

Hi all,
I am working on a module pool. I have a request to disobey the user profile date setting dd/mm/yyyy to user requested date format dd-mm-yyyy.
I understand that it can easily be done in SAPScript with command SET DATE MAST dd-mm-yyyy, but how to do it in module pool?
Thanks in advance.

Hi, Wong.
Follow the Steps Bellow
--> Copy Search Help BU_DATE_CHAR to ZBU_DATE_CHAR using T-Code SE11
--> Copy FM BUS_TOOLS_DATE_CHAR_EXIT to Z_BUS_TOOLS_DATE_CHAR_EXIT using T-Code SE37
--> Open ZBU_DATE_CHAR in Change mode and add Z_ in the Start of Search help exit FM as we have copy new
--> Active ZBU_DATE_CHAR it will not give you any Error message may be one Warning message but Ignore this.
--> Active Z_BUS_TOOLS_DATE_CHAR_EXIT my will give you error message do the following Change
     in Changing Tab SHIP type SHLP_DESCR    " Change the Previous type with this one.
     in Tables Tab SHLP_TAB type SHLP_DESCT  " Change the Previous type with this one.-->
--> After doing above changes.
--> Add the following line of Code on line number 92 just before the line APPEND record_tab.
REPLACE ALL OCCURRENCES OF '.' in record_tab-string WITH '-'.
--> Activate both Search Help and FM
now in the Search help filed in Module Pool you where using BU_DATE_CHAR use ZBU_DATE_CHAR
I did the above way and it is working fine this way now When i Press F4 and select some date it show in the Field like 01-01-2009 Previously it was showing me 01.01.2009
Please Reply if any problem,
Best Regards,
Faisal

Similar Messages

  • In LSMW flat file date format to be converted to user profile date setting.

    hi all,
      i got a flat file in which date is in mm/dd/yyyy format.i converted the data using lsmw but this conversion is valid only if user has set his date profile as mm/dd/yyyy in his user profile setting->own data. now if user has some other setting then it will give error. so how to convert date and how to do mapping with same . please help.

    Sunil,
    use below fm to get current user date format:
    data: idate TYPE sy-datum,
              tdat8 type string.
    CALL FUNCTION 'DATUMSAUFBEREITUNG'
         EXPORTING
           IDATE                 = idate
         IMPORTING
            TDAT8                 = tdat8.
    Amit.

  • User Profile Data for One Month in ST03N

    Dear All,
    I have one question for a similar requirement.
    I want to see the User Profile data for last month (e.g.August)
    I navigate through the same path as described by you.
    ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
    even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
    Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
    Thanks in advance.
    Best Regards,
    Jayesh

    Dear Shailesh,
    Thanks for the very prompt and accurate response.
    However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
    Kindly advice.
    Best Regards,
    Jayesh

  • Got rid of User Profiles data source in 2013?

    We're trying to put together an approval workflow using 2013, but it seems like they got rid of the "User Profiles" data source, so you cant simply select the Manager of the current user. I wanted to add that manager to the Participants of a Task
    process, but I kind of hit a brick wall with that.
    Is the process overall different in how I would talk to the active directory through the workflow? Or should I just stick to 2010 workflow?

    Correct, it is no longer there. You're going to have to use the user profile web service. See here:
    http://sharepointrocks.wordpress.com/2013/08/22/sharepoint-2013-using-infopath-and-userprofileservice-asmx-with-claims-based-web-applications/
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

    The question says it all:
    What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
    In the User Profile -> Permissions there is only the option for "Full Control".

    Hi Nikolay,
    Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
    http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
    http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
    http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • How to set the fonts in the user profile(very urgent)

    Hi All,
    Can anyone please tell how to set the fonts in the user profile.
    We have a requirement where currently all the data is being displayed in a font and the user want to change that font permanently.
    I hope you have got the requirement.
    Points will be surely awarded.
    Thank you.

    Hi,
    U can do this in SU02.
    Kishi.

  • Get the Email Id stored in the User Profile(Own Data)

    How can you get the Email Id that gets displayed in the User Profile (own data)? I need that id to be the Sender Id in the mail which converts an sapscript into pdf.

    data: p_addr type AD_SMTPADR.
    CALL FUNCTION 'FTR_CORR_CHECK_EMAIL_SAP_USER'
    EXPORTING
       I_USER                    = SY-UNAME
    IMPORTING
       E_EMAIL_ADDRESS           = p_addr
    EXCEPTIONS
       MAIL_ADDRESS              = 1
       DETERMINATION_ERROR       = 2
       OTHERS                    = 3.

  • Unable to see Active Directory Groups in the User Profile Database after Profile Import

    ***Major Update - I have finally been able to get the direct attention of the folks responsible for the User Profile Service on the SharePoint Product Team.  Long story short, they have reproduced the error and identified as an actual mistake
    that needs to be fixed, so it is now officially in the bug pipeline and will be fixed.  The current estimate is some time in the summer.  They will keep me updated with timeframes, which I am allowed to share as time goes on.
    SharePoint Server 2010 Enterprise RTM. W2K8R2 w/multi-server setup:
    AD/DNS
    SQL 2008
    WFE
    APP
    Claims Mode Web App only using Windows Integrated Auth
    So, this was never a problem in 2007, and I didn't even realize it was a problem in 2010 until I started to build a solution that utilized my blog article:
    InfoPath - User Roles in Browser-Enabled Forms Using AD Groups.  I went to utilize the same web method of the same web service, but I noticed that no data was showing up at all.  Typically,
    the GetUserMembership/GetCommonMembership methods return the specified user's memberships: AD Security Groups, AD Distribution Lists, and SharePoint Sites (not SharePoint Groups, though).
    My user profile sync is working.  All AD users are pulled in with the proper profile data.
    "Users and Groups" is selected in the Synchronization Entities section of my Sync Settings.
    Security groups are working for permissions and audience targeting.  Confirmed my users are affected properly by the use of Security Groups.
    My query to the GetUserMemberships web method (and GetCommonMemberships) is running (not failing), but it's not returning anything even though my user is in some Security Groups and has explicit membership to multiple sites.
    The GetUserProfileByName method of the same UserProfileService.asmx web service
    returns all the regular profile data like expected, so the web service works and my profile database is populated
    Basically, I'm not seeing my AD groups or any membership data populated in the profile database.  I did use MIISCLIENT.exe to see what I could find, and here is what I saw:
    Using the Metaverse Search, I searched for the "person" type and saw all of the users in my profile sync connection (single OU)
    Using the same tool, I searched for the "group" type and saw nothing, but the message said 4 items were retrieved
    I realized that the only column showing was displayName, and they were blank, so I added other columns to be sure
    objectGUID, objectType, distinguishedName all showed values, and I could now see all the Security Groups from the OU where I'm doing my profile sync
    My "person" objects all have displayNames showing but none of the groups do.  In SharePoint, the GetUserMemberships method relies on displayName and accountName, but neither are coming through the profile import
    So, it does seem like the groups are coming in with the profile import, but I can't see them.  I also can't verify that the groups are being associated with my users in the profile database, because doing a query to the membership methods returns nothing...not
    even blank rows.
    ***Edit:  New information!  Regular AD Distribution Lists _do_ work properly.  I just never bothered testing them until folks on my blog notified me.  DLs come through the profile sync, are visible in the profile database, and show up
    when using the GetUserMemberships method.
    ***Edit: Ok, now we're getting somewhere.  I checked my last profile sync with the MIISCLIENT, and this is what I found:
    Here are the properties of my Distribution List:
    Here are the properties of my Security Group:
    Notice that the groupType value of the DL is a normal integer (2), but the groupType value of the SG is some crazy negative number.  Both types are still lacking DisplayNames for some reason, but when I retrieve the DL via GetUserMemberships, it DOES
    show the proper DisplayName despite nothing showing in the MIISCLIENT.
    SharePoint Architect || Microsoft MVP ||
    My Blog

    Hello Clayton,
    I have same problem with SP 2010 and now I am testing SP 2013 and seems that the problem still.aa
    Probably I have some configuration problem, but all seems work, except this.
    SharePoint 2013 has no improvements on this. Until seeing this thread, I thought it was an issue within my farm configuration or AD Service account for User Profile Sync. And I've dug far and wide for any other possible settings which would prevent users
    from populating in the site people-picker. This might be flagged as off-topic, but I'll beg differ. How can I expect SharePoint to retrieve AD Users and Groups for accuracy in the sites which rely on this server??? Frustrating. I've spent hours and days on
    this! I have 3 SP2013 farms with multiple clients (different OU's/containers and security groups). Testing in a separate QA DEV farm with the same config. NO luck yet!
    This is where I'm at with it (posted this as a question recently on SharePoint Stack Exchange):
    "Help.... Please.... Users from AD groups are not populating in the site people picker. I've set up a SharePoint 2013 site collection permissions group with only AD groups in it, no users added directly. Whether or not I give this SharePoint group permissions
    to the site content, I still get none of the AD users showing up in the people picker. I have done the iisreset after adding the groups.
    I've checked all of the people picker properties in stsadm to be sure there are no constraints in effect on the web app or site collections.  User profiles are synching and I've tried both AD import and User Profile Sync.  The AD groups are security
    groups, though not email-enabled.  The AD service account has all the special permissions. My web app is claims based. My app pool runs with Network Service account.  No policies in place to restrict users, checked CA and the site collection settings.
    What am I missing? I've read in multiple places that this is a supported/working config. So why can't I get these users to populate in people picker for things like Assigned To in a tasks list, or attendees of an event? "
    There is some pretty good insight here, but no real hope:
    User profile
    synchronization: importing users and security groups in SharePoint 2010
    Other Properties that I checked, before realizing this was an issue with the Profile Import...
    stsadm -o getproperty -pn siteuseraccountdirectorypath -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-activedirectorysearchtimeout -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-distributionlistsearchdomains -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-nowindowsaccountsfornonwindowsauthenticationmode -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-onlysearchwithinsitecollection -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomfilter -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadcustomquery -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-searchadforests -url https://URL
    stsadm -o getproperty -propertyname peoplepicker-serviceaccountdirectorypaths -url https://URL
    Hope we find a better answer, as it IS very misleading. User Profile Import specifies Users, or Users and Groups. Nothing is said about Containers or Distribution Groups, worse yet there lacks any clear disclosure about how "Groups" will not
    actually import if they are a Global Security Group and the users contained within them exclusively will NOT be included in your profiles,
    nor in any compiled Audiences. Which was another BIG bummer!
    I'm hoping to see future improvements on the Group imports.

  • I have this message when i try to log onto my home pc "The User Profile Service, service failed the logon. User profile cannot be loaded." can I recover my music and photos from iCloud from another user account?

    I get this message when i try to log onto my home pc account "The user Profile Service, service failed the lofon. User profile cannot be loaded" can I recover my data from another/new user account from my iCloud account??

    "Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
    Good Afternoon Everyone,
    I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my  issue
    ... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
    Very Respectfully,
    Jesse
    Home Premium cannot logon to a Domain, nor can it be set to try it.
    when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
    Noel Paton | Nil Carborundum Illegitemi |
    CrashFixPC | The Three-toed Sloth

  • User Profile Password Setting

    Hi Gurus,
    My oracle version is Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit on AIX machine.
    My client requirement is to set the users profile expiry_date to *31/12/2099* .
    The user accounts are going to expire on month of APRIL i.e *04-APRIL-13* but now my clients want to extend user expiry date *04-APRIL-13* to *31/12/2099*
    How to set this expiry date to *31/12/2099* , any idea?
    Thanks,
    Meena

    Meenakshy singh wrote:
    Hi Gurus,
    My oracle version is Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit on AIX machine.
    My client requirement is to set the users profile expiry_date to *31/12/2099* .
    The user accounts are going to expire on month of APRIL i.e *04-APRIL-13* but now my clients want to extend user expiry date *04-APRIL-13* to *31/12/2099*
    How to set this expiry date to *31/12/2099* , any idea?
    Thanks,
    MeenaYou can't set a specific expiration date, only a password lifetime. But given the target date ... 31 dec 2099 .. isn't even within the life expectancy of anyone on this board, I'd expect the person who stated that requirement really wants passwords to never expire. So, password_lifetime=unlimited.

  • "The user profile service failed the logon. User profile cannot be loaded."

    I recently purchased a refurbished laptop from MTC (windows 7) and have been trying to remote into the windows systems at my school but I keep receiving this error message.  I'm aware there are dozens of threads on this topic but mine is slightly different.
     Bear with me, I know next to nothing about computers...
    I initially tried to follow the instructions given out by Microsoft (can't add a link here), but when it comes to looking at my S-1-5 directories, I do not have any that end in .bak, nor do I have two equally names ones.  I have one that is a string
    of numbers followed by -1000 and one with the same string of numbers but ending in -500.  
    The -1000 directory is missing the RunLogonScriptSync file, and has my account listed under value name for the ProfileImagePath information.  The -500 directory has the RunLogonScriptSync file and has "Administrator" listed under
    the value name for the ProfileImagePath.  
    In the instructions cited above I tried skipping to step 15 and accessing C:\Users\default\appdata\local\application data but I get an error message saying access is denied.  So I'm thinking there are two administrative accounts on this laptop, but
    when I access the accounts on the laptop I can only see mine.
    Any help would be appreciated!
    Thanks.

    In the instructions cited above I tried skipping to step 15 and accessing C:\Users\default\appdata\local\application data but I get an error message saying access is denied.  So I'm thinking there are two administrative accounts on this laptop, but
    when I access the accounts on the laptop I can only see mine.
    the "access denied" message, is making you think this?
    if so, ignore that, since the "access denied" message is a classic MSFT misdirection.
    It is *not* that you don't have access - the path you are trying to navigate to does not actually exist (it is a junction/reparse, not a folder), and, Windows Explorer doesn't follow that nicely, so it throws a misleading error message:
    C:\Users\Default\AppData\Local>dir /AL
     Volume in drive C is Windows7_OS
     Volume Serial Number is C0EB-A540
     Directory of C:\Users\Default\AppData\Local
    14/07/2009  03:08 PM    <JUNCTION>     Application Data [C:\Users\Default\AppData\Local]
    14/07/2009  03:08 PM    <JUNCTION>     History [C:\Users\Default\AppData\Local\Microsoft\Windows\History]
    14/07/2009  03:08 PM    <JUNCTION>     Temporary Internet Files [C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary Internet Files]
                   0 File(s)              0 bytes
                   3 Dir(s)  33,354,055,680 bytes free
    Instead, the "user profile service service failed the logon" can be commonly caused by an improperly secured file within any of the other folders (folders which form the Default User profile).
    Here's one which caught me out, and MSFT helped me resolve via a support case, and they blogged it afterwards:
    http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
    (my advice to you, is to dive into the event log with eventvwr, and look for an event similar to 1509, which should point you in the right direction for your particular situation)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • W7: User Profile Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.

    First time poster, but I think I've done my homework on this issue.
    This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    However, it is definitely not the same issue (see further).
    Current Config:
    HP dv7-1450.
    W7 RC 7100 x64
    Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
    Running with Admin account while diagnosing/troubleshooting.
    Currently have two working accounts, one standard, one admin.
    Symptom:
    New user accounts cannot be logged into.  On an attempted login to the new account, the following information is displayed on the login screen:  "The User Profile Service service failed the logon.  User profile cannot be loaded."  Windows then logs off the operator and returns to the initial user selection screen.  All other aspects of use are normal.
    Current Diagnostics:
    First attempts to resolve this problem were to recreate the new account.  This was attempted when logged in as both Standard and Admin.  This was also attempted under safe mode.  This has been attempted with virus protection disabled.  All to no difference in the symptom.
    The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link).  Unlike that issue, there simply is no entry for the new user.  Examination of the new log entries from creation of account to attempted log in provides the following entries:
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
    Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
    Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Naturally I started with the earliest error first, and decided to look to see what is going on.  The file that is trying to be copied is there, but the destination folder does not exist.  As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation.  Specifically I suspect it may not be able to create the appropriate folders before performing the copy.  Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs.  Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
    I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile).  The following two (unhelpful to me) log entries were generated.
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The message id for the desired message could not be found
    Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated.  I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
    There's the info.  I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log.  I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
    Thanks in advance to responders!

    First time poster, but I think I've done my homework on this issue.
    This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    However, it is definitely not the same issue (see further).
    Current Config:
    HP dv7-1450.
    W7 RC 7100 x64
    Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
    Running with Admin account while diagnosing/troubleshooting.
    Currently have two working accounts, one standard, one admin.
    Symptom:
    New user accounts cannot be logged into.  On an attempted login to the new account, the following information is displayed on the login screen:  "The User Profile Service service failed the logon.  User profile cannot be loaded."  Windows then logs off the operator and returns to the initial user selection screen.  All other aspects of use are normal.
    Current Diagnostics:
    First attempts to resolve this problem were to recreate the new account.  This was attempted when logged in as both Standard and Admin.  This was also attempted under safe mode.  This has been attempted with virus protection disabled.  All to no difference in the symptom.
    The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link).  Unlike that issue, there simply is no entry for the new user.  Examination of the new log entries from creation of account to attempted log in provides the following entries:
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
    Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
    Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Naturally I started with the earliest error first, and decided to look to see what is going on.  The file that is trying to be copied is there, but the destination folder does not exist.  As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation.  Specifically I suspect it may not be able to create the appropriate folders before performing the copy.  Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs.  Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
    I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile).  The following two (unhelpful to me) log entries were generated.
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The message id for the desired message could not be found
    Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated.  I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
    There's the info.  I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log.  I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
    Thanks in advance to responders!
    To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers.
    I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
    The fixes I found are related to local users only.
    When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
    I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
    presented with the error message below:
    "The registration of the service "User Profile Service" has failed. 
    The user profile can not be loaded"
    Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
    Many thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you receive for any one user or for all users?
    Have you tried to solve the issue by fixing the user account profile?
    For that you can adjust the registry setting “ProfileImagePath” with
    particular SID of that user under below mention path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
    More information.
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • The user profile service: Service failed the log on. User profile can not be loaded.

    I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
    Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
    the log on. User profile can not be loaded."
    I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
    The
    "Do not logon users with temporary profiles" Group Policy setting is not configured.
    And I have tried force replication too.
    I have exhausted all my knowledge.
    Please help
    Regards
    Phil

    It might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Anyone tried using LDIF file in the User Profile Synchronization Process?

    Microsoft pushied an article recently talking about using LDIF file in the SharePoint's user profile synchronization. 
    Configure profile synchronization using a Lightweight Directory Interchange Format (LDIF) file (SharePoint Server 2010) http://technet.microsoft.com/en-us/library/ff959234.aspx
    Currently I am unable to obtain the required "Replicate Directory Change" permission set up by the AD admin.  So I thought of exploring this alternative since I still have AD search permission right now.
    So far, I was able to set up the MOSSLDAP-LDIFMA, and use an import.ldif file to add, remove and update user profiles.  However, there are some problems that I can't resolve.  One of key problems is, the LDIF-imported records can't be
    sync'd with login-based records.
    In my environment, when a user login SharePoint via Windows authentication, a new profile would be added, under the account name "domain\username".  Meanwhile, when an LDIF record imported, there will be another profile created under the account
    name "domain:domain\username", or "domain:username".  That is, there would be two profiles for each user.
    Based on my understanding, it is very likely the user profile synchronization is based on the user's account name.  But in document and sample files provided, I can't find out any clue how to prepare the ldif file so that it will update the
    matching records, instead of creating new ones.
    Any help?  Thanks in advance.

    Has anyone managed to get this to work?
    It's nice that Microsoft offers the ability to import user profiles via LDIF into SharePoint, but it is useless if the account name is not correct after the import. I have tried multiple imports from the LDIF to get a user account to show up as  "domain\username" but
    it always ends up as "domain:domain\username", or "domain:username".  or a variation
    of these 2 with a colon separating the domain form the username. i see that multiple people have had the same problem, but unfortunetaly can't seem to find a solution. Also I see Bradley mentions that he was able to import accounts using get-QADUser,
    but he doesnt mention what the accounts import as or if it resolved the domain colon issue.
    Thanks in advance for any help or information anyone can provide.
    cheers,
    Zed

Maybe you are looking for

  • Downloaded update, now printer will not work.

    After downloading the newest update yesterday - the printer (HP Officejet Pro 8500A Plus) will not respond.  The MacBook Pro message shows that it is printing.  Nothing is happening. This happened after the last update also and it took 3/4 hour with

  • How to use property file - sql query define in property file

    Hi All, Anybody please tell me how to use property file. I have placed sql query in propery file and I have to access this in my file. well so far this is my code but don't know how to implement in the following ... pstmt = con.prepareStatement("sele

  • Digital copy code wont work in itunes

    Hi i have a few dvds which im trying to redeem on itunes from my digital copy but none of the codes are working and itunes keeps saying it can only be redeem through a computer, but i only have an ipad?! Please help thank you

  • Use Adobe forms for Dunning letters

    Dear All, We have a requirement to use dunning letters using Adobe Forms. I would like to know, 1. Is there a way we can attach adobe forms for dunning letters. 2. what could be the estimate do develop these letters using adobe forms. 3. Could I get

  • Express vi thermocouple reading temperature increase as temp decrease

    Hi there, I'm using a labiew express vi to take a measurement from a j-type thermocouple. I have, however noticed that a (real) temperature increase is shown as a temperature decrease indicating that I've wired the thermocouple in the opposite way to