Disolves or Fade To Black With a Key

Using Premiere 2.5, I have a foreground clip color keyed for a background clip to show through. When I disolve or fade the foreground clip shows a level of transparency allowing the background clip to show through. Varying the time slightly doesn't seem to help. What do I do?

What do I do?
Fade in a black clip that's placed above your other clips, instead of fading out the other clips.

Similar Messages

Can I create a fade from black with Media Encoder?

I am having a problem with Adobe DPS making my videos jump up (shift up a bit) in the first few seconds of the video. As a workaround I want to create a fade-from-black effect to hide the first seconds of the video. Can I create a fade in Media Encoder?

Digital Publishing Suite
Jim Simon wrote:
Adobe DPS

My display starts up with a black screen or fades to black after being on.

So just recently when I would turn my mac on, it starts up with just a black screen. The computer is on just no display. Sometimes it will take multiple times of restarting the computer to get the display to come on. When the display is finally on and working fine I found out that if I touch the top of the iMac near the iSight the screen will then slowly fade to black. And of course, the only fix is to restart. Anyone have a similar problem? Unfortunately I didn't purchase the extended warranty and my computer is one month past the 1 year mark. Thank you.

Restart the computer with the Option, Command, P, and R keys held down, and release them when you hear the second startup chime; this clears a setting which causes it to start up into verbose mode each time.
(35613)

After screen replacement, top half of screen starts by looking normal but then fades to black while bottom half stays bright but with images blury. What might went wrong?

A friend recently gave me their old Macbook pro 15 because they broke the screen and the Apple store quoted them $500-600 to fix it. I looked online and bought a screen of ebay for $170 in hopes of fixing it myself. After getting the screen I hooked it up using the steps I found online. Sadly when I turned it on, the top half of the screen was working apparently normally, but then it faded to black. The bottom half stayed bright with color the whole time but the images were always blurred. When I close the screen with it on, then open it after turning the computer on, the top half lights up with my desktop images as if it is working fine but then fades to black. The bottom is still blurred the whole time. What all could be wrong? Display cable, Inverter cable, not registering the screen or something, the screen is bad? I don't now a ton about all this and I have learned most of what I know from online research. I am not sure if I should send the screen back or if there is another issue. I just want to fix this thing.

Unfortunately, you don't even know the lower half of the computer is working properly, because you didn't have it until after it had been abused. So forget the attached screen for the moment. Connect an external monitor to it, fire it up, and see whether you can get a usable image on the external screen. If you can, send the defective "new" screen back for a refund, or replace the LVDS video cable first to make sure that's not where the problem lies, and if it isn't, then resort to sending the screen back. If you can't get a good image on the external, give the junk machine back to your friend and walk away.

Problems with fade to black transition and photoalbum themed titles

I keep having trouble with the titles in the photo album theme. When I use a fade to black transition and then try to use one of the top 4 titles available under the photos theme it seem like I have to move the title part of the way into the new clip or the fade to black transition just does not happen. It looks OK but the title come up after the new clip has been playing for several seconds and doesn't look as smooth. Any ideas?

One option is to create a "freeze frame" on the first frame of the new clip. Add your Photo Album title to the beginning of the new clip. Insert a fade to black transition between the preceding clip and the freeze frame. You may need to fiddle with the duration of both the freeze frame and the transition in order to get the timing right. Now, as the fade to black finishes you will see a short still segment just prior to the title commencing, as if the freeze frame is coming to life, so to speak. It looks quite effective, depending of course on the video content.
To add a freeze frame, right-click (or Control-click) on the appropriate frame, then select "Add Freeze Frame" from the pop-up menu. It's easier if you first move the thumbnail slider (lower right corner of the Projects window) to the half second mark, giving you a close-up view of your clips.
John

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

Why can't I use the fade to black and white option in iMovie '11?

I have a project that uses a few photos with one minute duration timers I want to slowly fade from color to black and white but the fade to options are all greyed out... Am I over looking something or doing something wrong?

Exiled Angel wrote:
....it's the color in the pictures I want to gradually reduce the saturation on until they are black and white before the transitions start, not fade in or out to a black or white screen like you are suggesting.
Sorry, but I wasn't suggesting that you use Fade to Black or Fade to White, just explaining what they do, given that you used the term "fade" in your first post. I assumed you may have been using the Fade to Black transition (which won't achieve what you want).
I suggested that you use Cross Dissolve, but I need to explain further how to achieve the effect you are looking for. First, you need to place a copy of the photo directly after the original. Make sure Ken Burns is turned off - use Fit. Now double-click on the copy to bring up the Clip Inspector. Click on Effects and select Black & White, then click Done. Drag a Cross Dissolve transition between the 2 clips (photos) and adjust the duration to your liking in the Inspector. Now you will see the effect your are looking for.
The key is to have an exact copy of the photo following the original, then change the copy to Black and White (or Sepia or any other effect), then insert the Cross Dissolve (or Cross Blur etc.) transition.
Hope that''s what you are looking for!
John

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

"Fade Through Black" transition in slideshows corrupts project!

I built a project from the ground up in iMovie. Shared this to iDVD. Constructed the whole dvd including a slideshow. When I clicked on "Fade Through Black" in the transitions menu for slideshows, iDVD abruptly quit with no error message! Completely quit.
I tried to open the project by double-clicking it and it would bring up a prompt saying "Loading themes", then show the iDVD window for a split second and quit again.
I tried making the iDVD project twice. With different themes each time, and still got the same result when I clicked on the "Fade Through Black" transistion. I had even saved the file right before clicking the transistion. That didn't help at all...

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

"Fade to black" transition without handles ?

Is there any method to do a "fade to black" transition without handles in FCP 6 ?
Like in iMovie for example. Maybe with another Pro App?
Many Thanks.

Have the Fade to Black end at the end of the clip, not in the middle. Notice when you drag transitions onto clips how you can make it end on the cut, be in the middle of the cut, or start at the cut.
Shane

Fade to black, jpegs.

hello all, I am new to FCE and am having trouble figuring out how to add a simple fade to black effect to a series of jpegs, Im shooting stop motion with my SLR and want to add a fade out to multiple shots- not just the very last one. At this point all I can do it add the effect to the very last still image and its much to abrupt - i want to gradually fade out over multiple shots. do I need to merge the jpegs somehow? any-help is appreciated.
~L

Dear lukasdp:
If you let your eyes wander to the right hand side of this page, you will Mr. Wolsky's name at the top of an impressive list showing the number of responses he has made to struggling FCE-ers. You will notice that he is number one.
Imagine how much time and work that took.
I am sure that users of this forum would be quick to tell you that Mr. Wolsky unfailingly gives excellent and useful advice and, very sensibly, that does sometimes mean that he refers some-one to a useful and informative site.
Most users, myself included, are very grateful to this gentleman.
I have no doubt that movie makers world wide view Mr. Wolsky with unreserved respect.
I suspect that your are brand new to the site. Nevertheless, perhaps your next step should be an apology to the man who was trying to help you.
Allosaurus

Fade to black at end of movie

In Garageband, there is a little triangle in the timeline that represents the end of the song. When you render (mix) the song out to a file, it will do it till it gets to that triangle.
Am I correct in saying that I need to add a gap at the end of every project if I want the end of the movie to fade to black and then have a second or two of black before the end of the movie file?
Thanks!
Scot

If you add the default dissolve transition at the end (command T with the end selected), it will fade to black. But there won't be any length of black once it is faded. For that you need to add a gap at the end. Option W inserts a default length (3 s I think) of gap at the playhead so make sure the playhead is at the end of your project first.

Fade to black doesn't end completely in black

This is driving me crazy. I've been using IMovie for years but first time on this new G4 laptop with IMovieHD. In a new project with clips in the timeline the scrubber won't extend to the very end of the clip. A fade to black doesn't end in black because when you zoom in the whole way on the scrubber bar you can't extend the scrubber the last sixteenth of an inch or so. This is screwing up fades and transitions. Anybody else seen this? I'm begging someone to respond. My second time posting this.

Okay, just tried this myself.
I see what you mean.
Try this:
At the end of your movie:
Put a blank title after the fade out. This gives the playhead somewhere to go and your fade will go all the way to black.
OR
In the middle of your movie:
Push the clips (transition included) appart so there's a little space between them. You should now see your transition fade all the way to black.

The monitor fade to black sometimes!

hi, i'm from chile and i writing here because i can't find an answer for my problem, I hav a KT6 Delta whit an Athlon XP 2200+, 512 Mb RAM and a MSI FX5200 TD128 gfx adapter, the problem is that sometimes the monitor fade to black by 1 - 2 sec. and come back, this fade is assemble with the tipical sound "tac" of a relay, like when the monitor's resolution change. This happen in any time, playing a game or in the desktop, i installed variuos versions of detonator drivers. The video card, and the monitor are ok, they are tested.
what can i do?
PD:sorry for my english!

English is the language around here. There might be many who wants to know how you got your problem, and if and how it was fixed. And it is not always there are such bilingual computer experts as Osnavi around.
Please tell us more about your PSU. There is a sticker on it, inside.
Would you please also enter Device manager while in Safe Mode, to see what is said about your video card there.

Fade to black at the end

Hi all
I've started to use Motion 5 for a few weeks now but I'm kinda stuck on how to fade to black on a project. Ok it's a
Motion 5 project (built in the program) called "Atmospheric - lower third" in the "Composition" section and I want to do a
5 sec fade to black. I added about 5 sec to the 20 sec project making it 25 sec and I don't find a fading FX in the program.
There IS a fade in and fade out together but I just want a fad out and how can I make it work?? I know I still need allot of
practice with this program and I intend to get Lynda video tutorials soon but I need to to this now for next week and I have
no idea what to do to make a good fade out. If it can't be done with this program can I export it to final cut X and do a fade
there? Any help would be very welcomed!!!!
THANKS!!!
Serge

The easiest thing to do is add a Color Solid:
Press the Generators button at the bottom right of the canvas and select Generators > Color Solid. This gives you a specialized shape that automatically fills the canvas with color. Set the Color (in the inspector) to Black.
Select the Properties tab and in the Blending section, set the Opacity to 0%
Right click on the word "Opacity" and from the popup menu, select Parameter Behaviors > Ramp
In the Behaviors inspector > Ramp, set the Start Value to 0% and the End Value to 100%
Move the playhead in the mini Timeline to the place where you want the "fade out" to start.
The Motion 5 Help window tends to be a little slow - and too in the way for me, so I have an online copy bookmarked for viewing in my browser here:
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
unfortunately, this version is not searchable, so I also keep the Motion 4 user manual bookmarked here:
http://documentation.apple.com/en/motion/usermanual/index.html
This version IS searchable. Keep in mind that Motion 4 and Motion 5 do not "look" the same. However, everything in the Motion 4 documentation (other than placement of icons, etc.) is concurrent with how Motion 5 works (Motion 5 has some new concepts that won't exist in the M4 documentation like Rigs and specialized drop zones that represent media content *in* FCPX.)
If you're okay with dealing with the appearance differences between Motion 5 and earlier versions, here is a good source for basic "practice" exercises (skip the ones on "Round-Tripping" -- that no longer applies to M5/FCPX): https://www.youtube.com/playlist?list=PLB7982C0260F090C1
More here:
http://www.applemotion.net/macbreak-studio/
And some pretty advanced tutorials here:
https://www.youtube.com/playlist?list=PLeZvvhzFi_ZxWbzZ5bhJ45QWzPHQ3Y5qy
All together, probably a better education than you'd get from Lynda.com and they're all free.

Disolves or Fade To Black With a Key

Similar Messages

Maybe you are looking for