Disp+w/p not running

Hi,
when i start the MMC disp+w/p is showing stopped.plz solve my problem.
plz urgent
vinnu.

hi vinod,
thx for concentrating on this.
trc file: "dev_disp", trc level: 1, release: "640"
Tue Nov 28 11:30:20 2006
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    21
intno      20020600
make:      multithreaded, ASCII
pid        3268
***LOG Q00=> DpSapEnvInit, DPStart (00 3268) [dpxxdisp.c   1100]
     shared lib "dw_xml.dll" version 21 successfully loaded
     shared lib "dw_xtc.dll" version 21 successfully loaded
     shared lib "dw_stl.dll" version 21 successfully loaded
     shared lib "dw_gui.dll" version 21 successfully loaded
Tue Nov 28 11:30:35 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0209.qqq.nxst) took 15 seconds
Tue Nov 28 11:30:56 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 21 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm)          6624     (828)
DpShMCreate: sizeof(tm_adm)          2219848     (11044)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          192000     (384)
DpShMCreate: sizeof(vmc_adm)          0     (320)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 058B0040, size: 2505416)
DpShMCreate: allocated sys_adm at 058B0040
DpShMCreate: allocated wp_adm at 058B17A8
DpShMCreate: allocated tm_adm_list at 058B3188
DpShMCreate: allocated tm_adm at 058B31B0
DpShMCreate: allocated wp_ca_adm at 05AD10F8
DpShMCreate: allocated appc_ca_adm at 05AD5748
DpShMCreate: allocated comm_adm_list at 05AD6EB8
DpShMCreate: allocated comm_adm at 05AD6ED0
DpShMCreate: allocated vmc_adm_list at 05B05CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05B05CF8
DpShMCreate: allocated wall_adm at 05B05D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1228 MB
<ES> 1227 blocks reserved for free list.
ES initialized.
Tue Nov 28 11:30:57 2006
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( icmohmsa06) [dpxxdisp.c   9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Tue Nov 28 11:31:37 2006
ERROR => W0 (pid 3348) died [dpxxdisp.c   12170]
ERROR => W1 (pid 1816) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2852) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3300) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3916) died [dpxxdisp.c   12170]
ERROR => W5 (pid 2556) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3620) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 2192) died [dpxxdisp.c   12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3348 (SIGUSR2)
ERROR => DpWpKill(3348, SIGUSR2) failed [dpxxtool.c   2468]
killing W1-1816 (SIGUSR2)
ERROR => DpWpKill(1816, SIGUSR2) failed [dpxxtool.c   2468]
killing W2-2852 (SIGUSR2)
ERROR => DpWpKill(2852, SIGUSR2) failed [dpxxtool.c   2468]
killing W3-3300 (SIGUSR2)
ERROR => DpWpKill(3300, SIGUSR2) failed [dpxxtool.c   2468]
killing W4-3916 (SIGUSR2)
ERROR => DpWpKill(3916, SIGUSR2) failed [dpxxtool.c   2468]
killing W5-2556 (SIGUSR2)
ERROR => DpWpKill(2556, SIGUSR2) failed [dpxxtool.c   2468]
killing W6-3620 (SIGUSR2)
ERROR => DpWpKill(3620, SIGUSR2) failed [dpxxtool.c   2468]
killing W7-2192 (SIGUSR2)
ERROR => DpWpKill(2192, SIGUSR2) failed [dpxxtool.c   2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1581
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Nov 28 11:31:47 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Tue Nov 28 06:01:47 2006
========================
No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
0 DIA     3348 Ended         no      1   0             0                                                             
1 DIA     1816 Ended         no      1   0             0                                                             
2 UPD     2852 Ended         no      1   0             0                                                             
3 ENQ     3300 Ended         no      1   0             0                                                             
4 BTC     3916 Ended         no      1   0             0                                                             
5 BTC     2556 Ended         no      1   0             0                                                             
6 SPO     3620 Ended         no      1   0             0                                                             
7 UP2     2192 Ended         no      1   0             0                                                             
Dispatcher Queue Statistics               Tue Nov 28 06:01:47 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          13
wake_evt_udp_now     0
wake events           total     9,  udp     8 ( 88%),  shm     1 ( 11%)
since last update     total     9,  udp     8 ( 88%),  shm     1 ( 11%)
Dump of tm_adm structure:               Tue Nov 28 06:01:47 2006
=========================
Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue Nov 28 06:01:47 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1581
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Nov 28 11:31:52 2006
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3936) (SOFT_KILL)
Stop icman
killing process (2312) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives  (PID:3936  HANDLE:1552)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1581
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Nov 28 11:31:53 2006
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died  (PID:3936  HANDLE:1552)
[DpProcDied] Process died  (PID:2312  HANDLE:1544)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'icmohmsa06'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1560
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3268) [dpxxdisp.c   8478]
Good Bye .....

Similar Messages

  • Disp+work.exe is running but not conneceted to message server

    Hi All
    disp+work.exe is running but not conneceted to message server
    Regards
    Blue

    Hi,
    Did you tried restarting the server ?
    is there any error related to the shared memory ?
    I suggest you to  restart and check ..if still no luck..
    better post the query in SAP Basis Forum with all the dump you are getting ..you willget quicker responses..
    HTH
    Rajesh

  • Disp+work.exe dispatcher is not running

    disp+work.exe dispatcher is not running while message server and igswd.exe is running properly. SAP is installed on Windows 64bit and on oracle. this errror message occures when i restore data from cold backup

    thanks for ur reply but still i am facing the same problem. i had done all the things which were mention in the note 400241and 50088. still disp+work.exe is not running. its developer trace is given below
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        TRN
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    75
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        660
    Thu Feb 14 12:54:58 2008
    kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
    length of sys_adm_ext is 572 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 660) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 75 successfully loaded
         shared lib "dw_xtc.dll" version 75 successfully loaded
         shared lib "dw_stl.dll" version 75 successfully loaded
         shared lib "dw_gui.dll" version 75 successfully loaded
         shared lib "dw_mdm.dll" version 75 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Thu Feb 14 12:55:04 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5273]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >drsap_TRN_00                            <
    DpShMCreate: sizeof(wp_adm)          18512     (1424)
    DpShMCreate: sizeof(tm_adm)          5258160     (26160)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1744)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F0D0050, size: 5947376)
    DpShMCreate: allocated sys_adm at 000000000F0D0050
    DpShMCreate: allocated wp_adm at 000000000F0D1F00
    DpShMCreate: allocated tm_adm_list at 000000000F0D6750
    DpShMCreate: allocated tm_adm at 000000000F0D67B0
    DpShMCreate: allocated wp_ca_adm at 000000000F5DA360
    DpShMCreate: allocated appc_ca_adm at 000000000F5E0120
    DpShMCreate: allocated comm_adm at 000000000F5E2060
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F668CF0
    DpShMCreate: allocated gw_adm at 000000000F668D70
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F668DA0
    DpShMCreate: allocated wall_adm at 000000000F668DB0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 1504
      argv[0] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = H:\usr\sap\TRN\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=2650
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=TRN
      argv[7] = -DSAPMYNAME=drsap_TRN_00
      argv[8] = -DSAPPROFILE=H:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS00_drsap
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
    ***LOG Q0K=> DpMsAttach, mscon ( drsap) [dpxxdisp.c   11586]
    DpStartStopMsg: send start message (myname is >drsap_TRN_00                            <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 75
    Release check o.K.
    Thu Feb 14 12:55:07 2008
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 276
         (SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2652) [nixxi.cpp    4235]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1504)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Thu Feb 14 12:55:44 2008
    ERROR => W0 (pid 2116) died [dpxxdisp.c   14241]
    ERROR => W1 (pid 3156) died [dpxxdisp.c   14241]
    ERROR => W2 (pid 1616) died [dpxxdisp.c   14241]
    ERROR => W3 (pid 1812) died [dpxxdisp.c   14241]
    ERROR => W4 (pid 224) died [dpxxdisp.c   14241]
    ERROR => W5 (pid 3100) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W6 (pid 3964) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W7 (pid 3316) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W8 (pid 3024) died [dpxxdisp.c   14241]
    ERROR => W9 (pid 3780) died [dpxxdisp.c   14241]
    ERROR => W10 (pid 1820) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W11 (pid 1712) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W12 (pid 3760) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:55:54 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Feb 14 07:55:54 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     2116 Ended         no      1   0             0                                                             
    1 DIA     3156 Ended         no      1   0             0                                                             
    2 DIA     1616 Ended         no      1   0             0                                                             
    3 DIA     1812 Ended         no      1   0             0                                                             
    4 DIA      224 Ended         no      1   0             0                                                             
    5 DIA     3100 Ended         no      1   0             0                                                             
    6 UPD     3964 Ended         no      1   0             0                                                             
    7 ENQ     3316 Ended         no      1   0             0                                                             
    8 BTC     3024 Ended         no      1   0             0                                                             
    9 BTC     3780 Ended         no      1   0             0                                                             
    10 BTC     1820 Ended         no      1   0             0                                                             
    11 SPO     1712 Ended         no      1   0             0                                                             
    12 UP2     3760 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Feb 14 07:55:54 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Thu Feb 14 07:55:54 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Feb 14 07:55:54 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:55:59 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >drsap_TRN_00                            < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4068) (SOFT_KILL)
    Stop icman
    killing process (1840) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4068  HANDLE:372)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:00 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4068  HANDLE:372)
    wait for end of icman
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:01 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:02 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:1840  HANDLE:380)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=405
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Feb 14 12:56:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1840  HANDLE:380)
    [DpProcDied] Process died  (PID:1504  HANDLE:356)
    DpStartStopMsg: send stop message (myname is >drsap_TRN_00                            <)
    NiIMyHostName: hostname = 'drsap'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 3 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 3 (r)
    NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 3
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 3 recv would block (errno=EAGAIN)
    Thu Feb 14 12:56:12 2008
    NiIPeek: peek for hdl 3 timed out (r; 1000ms)
    NiIRead: read for hdl 3 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
    NiBufSend starting
    NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
    SiSelNSet: set events of sock 300 to: ---
    NiBufISelRemove: remove hdl 3 from set0
    SiSelNRemove: removed sock 300 (pos=3)
    SiSelNRemove: removed sock 300
    NiSelIRemove: removed hdl 3
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 3 / sock 300
    NiBufIClose: clear extension for hdl 3
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 660) [dpxxdisp.c   10259]
    Good Bye .....

  • FAIL: process disp+work.EXE Dispatcher not running

    Hi All,
    I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
    ===================================================
    ============== Starting System NSP ================
    ===================================================
    =============== Starting database instance ...
    The service name is invalid.
    More help is available by typing NET HELPMSG 2185.
    The MaxDB Database Starter, Version 7.7.04.23
    Copyright 2000-2008 by SAP AG
    OK
    ============== Starting ABAP instance ...
    The requested service has already been started.
    More help is available by typing NET HELPMSG 2182.
    12.10.2008 12:25:40
    Start
    OK
    12.10.2008 12:25:50
    StartWait
    FAIL: process disp+work.EXE Dispatcher not running
    ============== Start operation timed out !
    Press any key to continue . . .
    Please help me out,
    Peerasit

    Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

  • SLD not running in system preparation

    Hi gurus,
    I have installed Solman 7.1 and now configuring, but in Select SLD phase I cant choose new SLD, and it is not running.
    http://solman_host:51000/sld returns error 500:
    500 Internal Server Error
    Error: -1
    Version: 7200
    Component: HTTP_PLG
    Date/Time: Tue Mar 6 12:36:49 2012 
    Module: http_plg_mt.c
    Line: 4696
    Server: 
    Error Tag:
    Detail: No handler defined for this URL
    How shall I start up sld?
    do I have to install it separately? or other patchwork is required?
    thx
    cheers

    Hi Roland and others
    I have checked the SLDCHECK, and here is the result:
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     3
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    SLD is still down:
    500 Internal Server Error
    Error:
    -1
    Version:
    7200
    Component:
    HTTP_PLG
    Date/Time:
    Sat Mar 24 13:05:19 2012
    Module:
    http_plg_mt.c
    Line:
    4741
    Server:
    host_SID_10
    Error Tag:
    {0001aba9}
    Detail:
    No handler defined for this URL
    In dev_rfc1 I have found:
    **** Trace file opened at 20120324 130515 MET, by disp+work
    **** Versions SAP-REL 720,0,120 RFC-VER U 3 1299223 MT-SL
    ======> Server repository could not create function template for 'SLDJAVA_ACCESSOR_REQUEST' caused by: com.sap.mw.jco.JCO$Exception: (1
    0
    ABAP Programm: CL_SLD_ACCESSOR===============CP (Transaction: SLDCHECK)
    Called function module: SLDJAVA_ACCESSOR_REQUEST
    User: ******* (Client: 001)
    Destination: SAPSLDAPI (Handle: 3, DtConId: 4F6DCB2995422DC5E10000000A930514, DtConCnt: 1, ConvId: 03051564,{4F6DCB2A-9542-2DC5-E100-00
    000A930514})
    EPP RootContextId: 001CC4FB5F1D1ED19DB4EBC20AD35903, ConnectionId: 00000000000000000000000000000000, ConnectionCnt: 0
    EPP TransactionId: 4F6DCB2095422DC5E10000000A930514
    **** Trace file opened at 20120324 130515 MET, by disp+work
    **** Versions SAP-REL 720,0,120 RFC-VER U 3 1299223 MT-SL
    ======> Server repository could not create function template for 'SLDJAVA_ACCESSOR_REQUEST' caused by: com.sap.mw.jco.JCO$Exception: (1
    0
    ABAP Programm: CL_SLD_ACCESSOR===============CP (Transaction: SLDCHECK)
    Called function module: SLDJAVA_ACCESSOR_REQUEST
    User: **** (Client: 001)
    Destination: SAPSLDAPI (Handle: 4, DtConId: 4F6DCB2B95422DC5E10000000A930514, DtConCnt: 1, ConvId: 03053655,{4F6DCB2C-9542-2DC5-E100-00
    000A930514})
    EPP RootContextId: 001CC4FB5F1D1ED19DB4EBC20AD35903, ConnectionId: 00000000000000000000000000000000, ConnectionCnt: 0
    EPP TransactionId: 4F6DCB2095422DC5E10000000A930514
    Thank ypou for your support
    © 2001-2009, SAP AG

  • Dispacher not running

    Hello
    i installed SAP NetWeaver 7.01 ABAP Trial Version on windows xp
    always i use wifi network
    i have this problem the dispacher and maxdb can't not run
    this log of dev_disp :
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
    Received 4 bytes from MSG_SERVER
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Jun 21 00:00:22 2010
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12550
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1468 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1468 (pos=2)
    SiSelNRemove: removed sock 1468
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: > <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1468
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2224) http://dpxxdisp.c 10766
    Thanks

    Hello
    thanks for you replay
    i attached log files : stderr2
    work process W3 died => ThInit: db_connect
    Mon Jun 21 12:54:13 2010
    SWITCH TRC-HIDE on ***
    work process W6 died => ThInit: db_connect
    ICM up and operational (pid: 2992) ***
    Shutdown ICM server ................
    ICM shutdown completed (pid: 2992) ***
    DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
    =======================================
    sapstart.log:
    SAP-R/3-Startup Program
    Starting at 2010/06/21 12:53:44
    Startup Profile: "D:SAPNSPSYSprofileSTART_DVEBMGS00_SAP"
    Starting Programs
    (3968) Execute: D:SAPNSPSYSexe
    unstrdbs.cmd NSP
    (2084) CreateProcess: D:SAPNSPSYSexe
    unmsg_server.EXE pf=D:SAPNSPSYSprofileNSP_DVEBMGS00_SAP
    (2088) CreateProcess: D:SAPNSPSYSexe
    undisp+work.EXE pf=D:SAPNSPSYSprofileNSP_DVEBMGS00_SAP
    (4020) Parent Shutdown at 2010/06/21 13:58:04
    (4020) kill(SIGINT 2088) failed.
    Send Signal SIGKILL to Process 2088
    ==========================================
    dev_W6:
    trc file: "dev_w6", trc level: 1, release: "701"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ

    B Mon Jun 21 12:54:14 2010
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:SAPNSPSYSexe
    undbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib: LoadLibrary(D:SAPNSPSYSexe
    undbsdbslib.dll) Error 126
    M          Error 126 = "Le module spécifié est introuvable."
    B  *** ERROR => Couldn't load library 'D:SAPNSPSYSexe
    undbsdbslib.dll'
    M sysno      00
    M sid        NSP
    M systemid   560 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    7
    M intno      20020600
    M make:      multithreaded, ASCII, optimized
    M pid        1088
    M
    M  kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
    M  length of sys_adm_ext is 364 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 6 1088)
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          8232     (1176)
    M  DpShMCreate: sizeof(tm_adm)          3786880     (18840)
    M  DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1296)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06820040, size: 4389744)
    M  DpShMCreate: allocated sys_adm at 06820040
    M  DpShMCreate: allocated wp_adm at 06821BF8
    M  DpShMCreate: allocated tm_adm_list at 06823C20
    M  DpShMCreate: allocated tm_adm at 06823C50
    M  DpShMCreate: allocated wp_ca_adm at 06BC04D0
    M  DpShMCreate: allocated appc_ca_adm at 06BC09D0
    M  DpShMCreate: allocated comm_adm at 06BC0E80
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 06C41D30
    M  DpShMCreate: allocated gw_adm at 06C41D70
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 06C41DA0
    M  DpShMCreate: allocated wall_adm at 06C41DA8
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X   DlLoadLib: LoadLibrary(D:SAPNSPSYSexe
    undbsdbslib.dll) Error 126
    M          Error 126 = "Le module spécifié est introuvable."
    B  *** ERROR => Couldn't load library 'D:SAPNSPSYSexe
    undbsdbslib.dll'
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192)
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1)

    M  Info for wp 6

    M    pid = 1088
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_SPOWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server SAP_NSP_00 on host SAP (wp 6)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Jun 21 12:54:15 2010
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10777
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 6 1088)
    =================================================================
    |
    ================================================
    dev_rd:
    trc file: "dev_rd", trc level: 1, release: "701"
    Mon Jun 21 12:54:05 2010
    ***LOG S00=> GwInitReader, gateway started ( 3572)
    systemid   560 (PC with Windows NT)
    relno      7010
    patchlevel 0
    patchno    0
    intno      20020600
    make:      multithreaded, ASCII, optimized
    pid        3572
    gateway runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
    gateway (version=701.2008.06.23)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Monitoring Architecture disabled, MoniSegmentSize too small: 0 bytes.
    ERROR => CCMS: unable to connect to montoring segment of application server! [alxxappl.c   982]
    ERROR => GwInitAlertMonitor: AlInit_R3Kernel_AS failed, rc=249
    ***LOG S10=> GwInitReader, GwInitAlertMonitor ()
    switch off alert monitoring
    Bind service sapgw00 (socket) to port 3300
    GwPrintMyHostAddr: my host addresses are :
      1 : 192.168.1.16 SAP (HOSTNAME)
      2 : 127.0.0.1 SAP (LOCALHOST)
      3 : 192.168.1.10 SAP (NILIST)
    Mon Jun 21 12:54:09 2010
      4 : 192.168.5.1 SAP (NILIST)
    Mon Jun 21 12:54:13 2010
      5 : 192.168.10.1 SAP (NILIST)
    Full qualified hostname = SAP
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          8232     (1176)
    DpShMCreate: sizeof(tm_adm)          3786880     (18840)
    DpShMCreate: sizeof(wp_ca_adm)          1280     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04320040, size: 4389744)
    DpShMCreate: allocated sys_adm at 04320040
    DpShMCreate: allocated wp_adm at 04321BF8
    DpShMCreate: allocated tm_adm_list at 04323C20
    DpShMCreate: allocated tm_adm at 04323C50
    DpShMCreate: allocated appc_ca_adm at 046C09D0
    DpShMCreate: allocated comm_adm at 046C0E80
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 04741D30
    DpShMCreate: allocated gw_adm at 04741D70
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 04741DA0
    MtxInit: -2 0 0
    Mon Jun 21 12:55:09 2010
    ***LOG S30=> GwStopGateway, gateway stopped ()
    Thanks

  • SAPOSCOL not running in MS Cluster

    Hi, gurus:
    We have a problem with SAPOSCOL in a SAP ECC 6.0 system (SAP ECC 6.0 + NetWeaver 7.00 + Oracle 10.2 + Windows Server 2003 R2 Enterprise x64 Edition) running over a MS cluster:
    Transactions OS06/ST06 shows no data, and they show an info message wich states: SAPOSCOL not running ? (shared memory not available ). When we checked this issue, we noticed that, in fact, there is no sapcoscol.exe task running in any node.
    But when we try to start the service (both using microsoft services console and cmd commands) although we can see the process running in the node which owns all the resources, SAP seems not notice that. The information system shows in ST06>Operating System Collector>Status is the following:
    iinterval             0             sec.
    Collector Version:
    Date/time             05.09.2008 16:55:01
    Start of Collector
    Status report
    Collector Versions                         
      running                                   COLL 20.95     700     - 20.64     NT 07/10/17
      dialog                                   COLL 20.95     700     - 20.65     NT 08/02/06
    Shared Memory                              attached
    Number of records                         575
    Active Flag                              active     (01)
    Operating System                         Windows NT     5.2.3790 SP     2 BL-SAP2 4x AMD64 Level 1
    Collector PID                              0 (00000000)
    Collector                                   not running (process ID not found).
    Start time coll.                              Thu Jan 01     01:00:00 1970
    Current     Time                              Fri Sep 05     16:55:01 2008
    Last write access                         Mon Sep 01     11:28:23 2008
    Last Read  Access                         Fri Sep 05     15:54:00 2008
    Collection Interval                         10     sec     (next delay).
    Collection Interval                         10     sec     (last ).
    Status                                   read
    Collect     Details                         required
    Refresh                                   required
    Header Extention Structure                    
    Number of x-header          Records          1
    Number of Communication     Records          60
    Number of free Com.          Records          60
    Resulting offset to     1.data rec.               61
    Trace level                                   3
    Collector in IDLE -     mode ?               NO
      become idle after     300     sec     without     read access.|
      Length of     Idle Interval                    60     sec
      Length of     norm.Interval                    10     sec
    But saposcol.exe is running with a certain PID in the same note than SAP and Oracle under user sapservice<sid>
    We have tried to run saposcol in several ways (as, I have noted before: from microsoft service console, from cmd line using "net start saposcol", using the saposcol under C:\WINDOWS\SapCluster and the one under
    F:\usr\sap\PRD\sys\exe\run, fom the two nodes, accessing the cluster through several IPs...) and tried the commands saposcol -c and saposcol -k but we cannot get the saposcoll run. Moreover, we haven't found any log information. The only log we (and SAP) could find is the one located in C:\WINDOWS\SapCluster\dev_coll.
    This log remain frozen at September 1st:
          SAPOSCOL version  COLL 20.95 700 - 20.64 NT 07/10/17, 64 bit, multithreaded, Non-Unicode
          compiled at   Feb  3 2008
          systemid      562 (PC with Windows NT)
          relno         7000
          patch text    COLL 20.95 700 - 20.64 NT 07/10/17
          patchno       146
          intno         20050900
          running on    BL-SAP2 Windows NT 5.2 3790 Service Pack 2 4x AMD64 Level 15 (Mod 65 Step 3)
    12:04:16 01.09.2008   LOG: Profile          : no profile used
    12:04:16 01.09.2008   LOG: Saposcol Version  : [COLL 20.95 700 - 20.64 NT 07/10/17]
    12:04:16 01.09.2008   LOG: Working directory : C:\WINDOWS\SAPCLU~1
    12:04:16 01.09.2008   LOG: Allocate Counter Buffer [10000 Bytes]
    12:04:16 01.09.2008   LOG: Allocate Instance Buffer [10000 Bytes]
    12:04:17 01.09.2008   LOG: Shared Memory Size: 71898.
    12:04:17 01.09.2008   LOG: Connected to existing shared memory.
    12:04:17 01.09.2008   LOG: MaxRecords = 575 <> RecordCnt + Dta_offset = 614 + 61
    12:04:22 01.09.2008 WARNING: WaitFree: could not set new shared memory status after 5 sec
    12:04:22 01.09.2008 WARNING: Cannot create Shared Memory
    Kernel Info:
    Kernel release    700
    Compilation        NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    Sup.Pkg lvl.       146
    ABAP Load       1563
    CUA load           30
    Mode                opt
    Can anyone shed some light on the subject?
    Thank you very much and kind regards
    Edited by: Jose Enrique Sepulveda on Sep 6, 2008 2:10 AM

    Dear bhaskar:
    Thanks for your reply. We have considered balancing the system to the other node or reboot the system to free resources, in order to re-create the shared memory, but in the past, the balancing process (move resources from one node to the other) has caused problems. Since this is a critical system, stopping (or balancing) is not an option right now, and updating the kernel requires an ABAP stack reboot plus the kernel change : any changes in system configuration requires a longer approval/planning process than a reboot.
    Moreover, the OS collecting system and its display in OS06/ST06 has worked fine until now.
    Does anyone knows if a reboot has solved this kind of problem in a similar situation?
    Thanks in advance
    José Enrique

  • HT1349 I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???

    Welcome to the Apple Community.
    Enter the details of her second account at system preferences> mail, contacts & calendars.

  • When KM Scheduler is stopped or not running

    Hi Experts,
    I have created KM Scheduler using the blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515.Scheduled for every 30 mins.
    In Systemadmin>Monitor> KM-->i can see whether Scheduler is running or not.
    Now the requirement is to send a mail to the portal support team when Scheduler is stopped or not running. Is it possible?and how we can proceed?
    Please guide me.
    Sony.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • KM Scheduler Task is not running...

    Dear All,
    I have created a KM Scheduler Task using the NDWS Wizard. I followed prakash's blog (http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1515). My doubt is where exactly the attributes are created? and can any one guide how to create the attributes in .cc.xml file. And how does public void run( String id, Properties properties ) it works?
    The application was successfully deployed. I am able to see my task under System Administration->System Configuration->Knowledge Management->Configuration->Content Management->Global Services->Scheduler Tasks.  but I think it is not running. Can any one give some clue on this. As i'm not finding any thing uder Kmcontent>Documents.
    Do i need to configure anything to run KM scheduler Task?
    Thanks and Regards,
    JAGAN.
    Edited by: Jagan456533 on Jan 19, 2011 11:10 AM

    Hi Jagan,
    The status "0" for your task in "Component Monitor" is fine.
    Navigate to System Administration> System Configuration>Service Configuration. You can see here Applications and Portal runtime.
    Open Applications--> and you Task. Right click on your task folder and say Administrate. Here you check whether your task has been stopped, running. Make sure its running. ( Try refresh, if its already running ).
    In you task folder, you will see "Service Folder"  under this, you will see "RFServiceWrapper", right click on it and say configure, make sure the values are like shown below:
    Name : http://sapportals.com/xmlns/cm/sch
    Value: Value1
    Also make sure in your portalapp.xml, the values are same:
    RFServiceWrapper
    service-config
    className= com.sap.netweaver.rf.wrapper.RFServiceWrapper
    startup= true
    service-profile
    Name= = http://sapportals.com/xmlns/sch
    Prof= Value1
    You see tha the same name is used "Value1" in RFServiceWrapper both in portalapp.xml and in Service Configuration.
    You can use any other name but the it should be same in both the places.
    Make all these changes, and then restart your task in Service configuration again. Any changes in portalappl.xml, restart is necessary.
    Kind Regards,
    Poornima

  • Why will firefox not start on my laptop? can't uninstall or open the profile manager either. it simply does not run. it used to work fine until i had to restore my system.

    had firefox 4.0 & have been a user of firefox for a few years now. never had any problems. had to do a system restore after my computer detected a virus of some sort & i couldn't do anything. the virus kept popping up a bogus add for me to buy an antivirus program. had to restart laptop in safemode to initiate the restore. ever since then firefox has not opened. can't even uninstall it or open the profile manager. anything that has to do with firefox will simply not run/open at all. i'm stumped.

    System restore can cause problems as well as solve them, it has probably completely mucked up your Firefox installation.
    Try deleting your Firefox installation directory, the default location on 32 bit Windows is C:\Program Files\Mozilla Firefox\
    Now re-install Firefox, it should pick up your current profile folder so you should not lose your bookmarks, passwords etc.

  • Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

    Hello everyone!
    I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
    1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
    2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
    3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
    4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
    5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
    6. I opened the cloneDBCreation.log and it contains these data:
    SQL> Create controlfile reuse set database "XE"
      2  MAXINSTANCES 8
      3  MAXLOGHISTORY 1
      4  MAXLOGFILES 16
      5  MAXLOGMEMBERS 3
      6  MAXDATAFILES 100
      7  Datafile
      8  'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
      9  'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
    10  'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
    11  'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
    12  LOGFILE
    13  GROUP 1 SIZE 51200K,
    14  GROUP 2 SIZE 51200K,
    15  RESETLOGS;
    SP2-0640: Not connected
    SQL> exec dbms_backup_restore.zerodbid(0);
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SQL> shutdown immediate;
    ORA-12560: TNS:protocol adapter error
    SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
    ORA-12560: TNS:protocol adapter error
    SQL> Create controlfile reuse set database "XE"
      2  MAXINSTANCES 8
      3  MAXLOGHISTORY 1
      4  MAXLOGFILES 16
      5  MAXLOGMEMBERS 3
      6  MAXDATAFILES 100
      7  Datafile
      8  'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
      9  'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
    10  'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
    11  'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
    12  LOGFILE
    13  GROUP 1 SIZE 51200K,
    14  GROUP 2 SIZE 51200K,
    15  RESETLOGS;
    SP2-0640: Not connected
    SQL> alter system enable restricted session;
    SP2-0640: Not connected
    SQL> alter database "XE" open resetlogs;
    SP2-0640: Not connected
    SQL> alter database rename global_name to "XE";
    SP2-0640: Not connected
    SQL> alter system switch logfile;
    SP2-0640: Not connected
    SQL> alter system checkpoint;
    SP2-0640: Not connected
    SQL> alter database drop logfile group 3;
    SP2-0640: Not connected
    SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
    SP2-0640: Not connected
    SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
    SP2-0640: Not connected
    SQL> select sid, program, serial#, username from v$session;
    SP2-0640: Not connected
    SQL> alter user sys identified by "&&sysPassword";
    SP2-0640: Not connected
    SQL> alter user system identified by "&&systemPassword";
    SP2-0640: Not connected
    SQL> alter system disable restricted session;
    SP2-0640: Not connected
    SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
    SQL> connect "SYS"/"&&sysPassword" as SYSDBA
    ERROR:
    ORA-12560: TNS:protocol adapter error
    SQL> set echo on
    SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
    I spent around 2 days to come to this reason and now I do not know what to do next.
    My actions to resolve this problem:
    1. Checked if my user has administrative rights and belongs to ora_dba. It does!
    2. Turned Microsoft UAC off.
    3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
         - ORACLE_BASE -> C:\oraclexe
         - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
         - ORACLE_SID -> XE
         - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
         - TNS_ADMIN -> %ORACLE_HOME%\network\admin
    4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
    Some more errors:
    1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
    Instance created.
    DIM-00019: create service error
    O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
    It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
    I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
    2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
    Some other information relevant to the issue:
    1)  echo %USERNAME% - Administrator
         echo %USERDOMAIN% - ildar-PC
    2) Listener.log:
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
          (PROGRAM = extproc)
        (SID_DESC =
          (SID_NAME = CLRExtProc)
          (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
          (PROGRAM = extproc)
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
          (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    DEFAULT_SERVICE_LISTENER = (XE)
    3) Tnsnames.log
    XE =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
        (CONNECT_DATA =
          (SID = CLRExtProc)
          (PRESENTATION = RO)
    4) Sqlnet.log:
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    5) While connecting by sqlplus, I get this errors/messages:
    6) Confirmation that I've got admin rights and I am in ORA_DBA:
    If u need some more information from me, please let me know!!
    Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
    Kind regards,
    ildar

    I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
    Instance created.
    DIM-00019: create service error
    O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
    Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
    This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
    Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

  • C6280 HP Solution Center will not run or install

    I have been using my C6280 on my home network for years with Solution Center intalled on a desktop running Vista andtwo laptops running Windows 7 with only the print drivers installed. HP Update was eanbled on the desktop.
    In the past two or three months, I started to get a number of error messages on my desktop indicating there was something wrong with Solution Center. The issue steadily worsened to the point where Solution Center would not run at all (unable to detect device seemed to be the most recurrent message) and I was unable to run the scanner.
    I was able to maintain printer fnctionality by deleting and then adding the printer through Windows, although I seemed to be forced to do this every few days.
    I went on the forum and decided the best course of action to restore full functionality was to uninstall all HP software and then download/install the software suite. I downloaded the Vista 32 bit version  (100_228_PS_AIO_02_Full_Net_enu_NB.exe) andI tried installation several times with no luck - the installation always seemed to get stuck immediately after extracting files.
    I went back on the forum and found out how to do a level 4 uninstall from a temp folder beginning with 7z... . I did that and tried again (after checking that my Adobe Flash was up to date).  The install went a little further this time but eventually stopped again. File not found.  I ran the installation .exe from the temp file and went a little further but stopped again. An error log was created and a 'fix' was placed on my desk top. I followed the instructions but the 'fix' did nothing (it was just a text file - nothing to run that I could decypher). Just to make sure I was doing it right, I repeated the entire uninstall/download/reinstall process two more times with the same result. 
    The above process was beginning to remind me of Einstein's defiition of insanity (do ing the same thing over and over and expecting different resuts) so I gave up and successfully downloaded and installed the printer drivers to restore print functionality.
    How do I get my scan functionality back?
    Thanks
    This question was solved.
    View Solution.

    Hi,
    May you have McAfee Antivirus on your PC?
    If so try following the steps belwo and let me know if that may help:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select Never and confirm by clicking the Turn Off button.
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Reboot your PC
    8. Run the installation file and check for any difference.
    9. Once you are done, be sure to open McAfee and re-activate Real Time Scanning.
    If the issue persists, please clarify what security software you are using,
    As well open the device manager and expend the Processors category - what processor you have on your PC?
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • QMASTER hints 4 usual trouble (QM NOT running/CLUSTEREd nodes/Networks etc

    All, I just posted this with some hints & workaround with very common issues people have on this forum and keep asking concerning the use of APPLE QMASTER with FCP, SHAKE, COMPRESSOR and MOTION. I've had many over the last 2 years and see them coming up frequently.
    Perhaps these symptoms are fixed in FCS2 at MAY 2007 (now). However if not here's some ROTS that i used for FCP to compressor via QMASTER cluster for example. NO special order but might help someone get around the stuff with QMASTER V2.3, FCP V5.1.4, compressor.app V2.3
    I saw the latest QMASTER UI and usage at NAB2007 and it looked a little more solid with some "EASY SETUP" stuff. I hope it has been reworked underneath.. I guess I will know soon if it has.
    For most FCP/COMPRESSOR, SHAKE. MOTION and COMPRESSOR:
    • provide access from ALL nodes to ALL the source and target objects (files) on their VOLUMES. Simply MOUNT those volumes through the APPLE file system (via NFS) using +k (cmd+k) or finder/go/connect to server. OR using an SSAFS such as XSAN™ where the file systems are all shared over FC not the network. YOu will notice the CPU's going very busy for a small while. THhis is the APPLE FILE SYSTEM task,,, I guess it's doing 'spotlight stuff". This goes away after a few minutes.
    • set the COMPRESSOR preferences for "CLUSTER OPTIONS" to "Never copy source to Cluster". This means that all nodes can access your source and target objects (files) over NFS (as above). Failure to to this means LENGTHY times to COPY material back an forth, in some cases undermining the pleasure gained from initially using clustering (reduced job times)
    • DONT mix the PHYSICAL or LOGICAL networks in your local cluster. I dont know why but I could never get this to work. Physical mean stick with eother ETHERNET or FIREWIRE or your other (airport etc whic will be generally way to slow and useless), Logical measn leepin all nodes on the SAME subnet. You can do this siply by setting theis up in the system preferences/QMASTER/advanced tab under "Use Network Interfaces". In my currnet QUAd I set this to use BUILT IN ETHERNET1 and in the MPBDC's I set this to their BUILTIN ETHERNET.
    • LOGICAL NETWORKS (Subnet): simply HARDCODE an IP address on the ETHERNET (for eample) for your cluster nodes andthe service controller. FOr eample 3.1.1.x .... it will all connect fine.
    • Physical Networks: As above (1) DONT MIX firewire (IPoFW) and Ethernet(IPoE). (2) if more than extra service node USE A HUB or SWITCH. I went and bought a 10 port GbE HUB for about $HK400 (€40) and it worked fine. I was NEVER able to get a stable system of QMASTER mixing FW and ETHERNET. (3) fwiw using IP of FW caused me a LOAD of DISK errors and timouts (I/O errors) on thosse DISKs that were FW400 (al gone now) but it showed this was not stable overall
    • for the cluster controller node MAKE SURE you set the CLUSTER STORAGE (system preferences/QMASTER/shared cluster storage) for the CLUSTER CONTROLLER NODE IS ON A SHARED volume (See above). This seems essential for SHAKE to work. (if not check the Qmaster errors in the console.app [see below] ). IF you have an SSAFS like XSAN™ then just add this cluster storage on a share file path. NOte that QMASTER does not permit the cluster storage to be on a NETWORK NODE for some reason. So in short just MOUNT the volume where the SHARED CLUSTER file is maintained for the CLUSTER controller.
    • FCP - avoid EXPORT to COMPRESSOR from the TIMELINE - it never seems to work properly (see later). Instead EXPORT FROM SEQUENCE in the BROWSER - consistent results
    • FCP - "media missing " messages on EXPORT to COMPRESSOR.. seems a defect in FCP 5.1 when you EXPORT using a sequence that is NOT in the "root" or primary trry in the FCP PROJECT BROWSER. Simply if you have browser/bin A contains(Bin B (contains Bin C (contains sequence X))) this will FAIL (wont work) for "EXPORT TO COMPRESSOR" if you use EXPORT to COMPRESSOR in a FCP browser PANE that is separately OPEN. To get around this, simply OPEN/EXPOSE the triangles/trees in the BROWSER PANE for the PROJECT and select the SEQUENCE you want and "EXPORT to COMPRESSOR" from there. This has been documented in a few places in this forum I think.
    • FCP -> COMPRESSOR -> .M2V (for DVDSP3): some things here. EXPORTING from an FCP SEQUENCE with CHAPTER MARKERS to an MPEG2 .M2V encoding USING A CLUSTER causes errors in the placement of the chapter makers when it is imported to DVDSP3. In fact CONSISTENTLY, ALL the chapter markers are all PLACED AT THE END of the TRACK in DVD SP# - somewhat useless. This seems to happen ALSO when the source is an FCP reference movie, although inconsistent. A simple work around if you have the machines is TRUN OF SEGMENTING in the COMPRESSOR ENCODER inspector. let each .M2V transcode run on the same service node. FOr the jobs at hand just set up a CLUSTER and controller for each machine and then SELECT the cluster (myclusterA, hisclusterb, herclusterc) for each transcode job.. anyway for me.. the time spent resolving all this I could have TRANSCODED all this on my QUAD and it would all have ben done by sooner! (LOL)
    • CONSOLE logs: IF QMASTER fails, I would suggest your fist port of diagnosis should be /Library/Logs/Qmaster in there you will see (on the controller node) compressor.log, jobcontroller.com.apple.qmaster.cluster.admin.log, and lots of others including service controller.com.apple.qmaster.executorX.log (for each cpu/core and node) andd qmasterca.log. All these are worth a look and for me helped me solve 90% of my qmaster errors and failures.
    • MOTION 3 - fwiw.. EXPORT USING COMPRESSOR to a CLUSTER seems to fail EVERY TIME.. seems MOTION is writing stuff out to a /var/spool/qmaster
    TROUBLESHOOTING QMASTER: IF QMASTER seems buggered up (hosed), then follow these steps PRIOR to restarting you machines.
    go read the TROUBLE SHOOTING in the published APPLE docs for COMPRESSOR, SHAKE and "SET UP FOR DISTRIBUTED PROCESSING" and serach these forums CAREFULLY.. the answer is usually there somewhere.
    ELSE THEN,, try these steps....
    You'll feel that QMASTER is in trouble when you
    • see that the QMASTER ICON at the top of the screen says 'NO SERVICES" even though that node is started and
    • that the APPLE QMASTER ADMINSTRATOR is VERY SLOW after an 'APPLY" (like minutes with SPINNING BEACHBALL) or it WONT LET YOU DELETE a cluster or you see 'undefined' nodes in your cluster (meaning that one was shut down or had a network failure)..... all this means it's going to get worse and worse. SO DONT submit any more work to QAMSTER... best count you gains and follow this list next.
    (a) in COMPRESSOR.app / RESET BACKGROUND PROCESSES (its under the COMPRESSOR name list box) see if things get kick started but you will lose all the work that has been done up to that point for COMPRESSOR.app
    b) if no OK, then on EACH node in that cluster, STOP the QMASTER (system preferences/QMASTER/setup [set 0 minutes in the prompt and OK). Then when STOPPED, RESET the shared services my licking OPTION+CLICK on the "START" button to reveal the "RESET SERVICES". Then click "START" on each node to start the services. This has the actin of REMOVING or in the case where the CLUSTER CONTROLLER node is "RESET" f terminating the cluster that's under its control. IF so Simply go to APPLE QMASTER ADMINISTRATOR and REDFINE it. Go restart you cluster.
    c) if step (b) is no help, consult the QMASTER logs in /Library/Logs/Qmaster (using the cosole.app) for any FILE MISSING or FILE not found or FILE ERROR . Look carefully for the NODENAME (the machine_name.local) where the error may have occured. Sometimes it's very chatty. Others it is not. ALso look in the BATCH MONITOR OUTPUT for errors messages. Often these are NEVER written (or I cant find them) in the /var/logs... try and resolve any issues you can see (mostly VOLUME or FILE path issues from my experience)
    (d) if still no joy then - try removing all the 'dead' cluster files from /var/tmp/qmaster , /var/sppol/qmaster and also the file directory that you specified above for the controller to share the clustering. FOR shake issues, go do the same (note also where the shake shared cluster file path is - it can be also specified in the RENDER FILEOUT nodes prompt).
    e) if all this WONT help you, its time to get the BIG hammer out. Simply, STOP all nodes of not stopped. (if status/mode is "STOPPING" then it [QMASTER] is truly buggered). DISMOUNT the network volumes you had mounted. and RESTART ALL YOUR NODES. Tis has the affect of RESTARTING all the QMASTERD tasks. YEs sure you can go in and SUDO restart them but it is dodgy at best because they never seem to terminate cleanly (Kill -9 etc) or FORCE QUIT.... is what one ends up doing and then STILL having to restart.
    f) after restart perform steps from (B) again and it will be usually (but not always) right after that
    LAstly - here's some posts I have made that may help others for QMASTER 2.3 .. and not for the NEW QMASTER as at MAy 2007...
    Topic "qmasterd not running" - how this happened and what we did to fix it. - http://discussions.apple.com/message.jspa?messageID=4168064#4168064
    Topic: IP over Firewire AND Ethernet connected cluster? http://discussions.apple.com/message.jspa?messageID=4171772#4171772
    LAstly spend some DEDICATED time to using OBJECTIVE keywords to search the FINAL CUT PRO, SHAKE, COMPRESSOR , MOTION and QMASTER forums
    hope thats helps.
    G5 QUAD 8GB ram w/3.5TB + 2 x 15in MBPCore   Mac OS X (10.4.9)   FCS1, SHAKE 4.1

    Warwick,
    Thanks for joining the forum and for doing all this work and posting your results for our benefit.
    As FCP2 arrives in our shop, we will try once again to make sense of it and to see if we can boost our efficiencies in rendering big projects and getting Compressor to embrace five or six idle Macs.
    Nonetheless, I am still in "Major Disbelief Mode" that Apple has done so little to make this software actually useful.
    bogiesan

  • Ni usrp example are not running on window 7 64 bit

    i have installed labview 2012 ,modulation toolkit, mathscript toolkit and usrp device driver 1.2. i am using window 7 64 bit operating system. i am trying to run example of usrp but it was not running it is not able to load NI-MAPro.lvlib files .any other toolkit required to be installed to run examples of ursrp ...please help  i am new to usrp and labview.

    well most example of modulation toolkit and other like  EX FM demod sound card (queue), ex fsk tx,ex pam rx , ex pam tx, psk, QAM  ....allmost all example are creating poblem..whenever i click it start loading file but it is not able load NI_MAPro.lvlib it ask for file path but i donot where these files are located.for example if i click to open FM Demod sound card (queue) example it is not able laod file NI_Mapro.lvlib:fft power spectrum for 1 chan(cdb).vi

Maybe you are looking for

  • Transport of ABAP query to production server

    Hi! I have developed a report with ABAP query in development server with transaction codes SQ01, SQ02 AND SQ03 respectively. I also got the program name from SQ01. Now , how to attach a transaction code with the program that is generated from ABAP qu

  • Setting Preferences in bpel.xml

    Hi again, in the bpel.xml you can configure preferences for setting value pair properties that are defined in the deployment descriptor of a BPEL process and can be accessed at runtime by the BPEL process eg <BPELSuitcase> <BPELProcess id="test" src=

  • Urgent Please help RadioButton + Jsp

    I am doing an project named an online exam. I have various questions say about 10 questions.And there are 4 radiobutton are given as option.In the next page I want to retrive the answers clicked by the user for each of the question.I am getting the v

  • Wireless printer is offline and I can't get it back online

    I have a HP Envy 700-414 Desktop PC operating with Windows 8.1 (64-bit) system that was connected wirelessly to a HP Officejet Pro 8600 Plus printer.  It worked fine for the first couple of days.  Now it says that my printer is offline.  I've tried s

  • Application Crash when use crystal report

     I use crystal report in visual studio 2010. In crystal report i use parameter, image, sub-report. When i close the crystal report viewer. there is always crash my program, below are the details. How I overcome this situation????????? Problem signat