Disp+work.exe is not working in ecc6.0 with sql database

hi this is suhana presently i am installing ecc6.0 and sql server database ,recently my mmc console is not starting
in mmc disp+work.exe not started ,problem is message server is connected dialog is standstill 0.00, jccontrol is not connected.plz send reply as early as possible to my mail
thank you

I guess you should first check your sapstart.log, to see which profile is being called. check sapstartsrv.exe if version is consistent with disp+work.exe, and sap services is maintained startup properly (Control Panel -. Administrative Tools -> Services)
then check if the profile is ok.
then check dev_disp dispatcher log for error, in case disp+work.exe has been triggered to startup...
Regards,
Vincent

Similar Messages

Disp+work.exe is not working

Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
below is the dev_dsp file details :
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        EC6
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2196
Fri Sep 19 21:26:44 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c   1237]
     shared lib "dw_xml.dll" version 75 successfully loaded
     shared lib "dw_xtc.dll" version 75 successfully loaded
     shared lib "dw_stl.dll" version 75 successfully loaded
     shared lib "dw_gui.dll" version 75 successfully loaded
     shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 19 21:26:49 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00                           <
DpShMCreate: sizeof(wp_adm)          18304     (1408)
DpShMCreate: sizeof(tm_adm)          3994272     (19872)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1440)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E40
DpShMCreate: allocated tm_adm_list at 05EF65C0
DpShMCreate: allocated tm_adm at 05EF65F0
DpShMCreate: allocated wp_ca_adm at 062C5890
DpShMCreate: allocated appc_ca_adm at 062CB650
DpShMCreate: allocated comm_adm at 062CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0634E450
DpShMCreate: allocated gw_adm at 0634E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0634E4C0
DpShMCreate: allocated wall_adm at 0634E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Sep 19 21:26:50 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Sep 19 21:26:52 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2628
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 19 21:26:55 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
Fri Sep 19 21:27:06 2008
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c   11586]
Fri Sep 19 21:27:12 2008
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00                           <)
DpStartStopMsg: start msg sent
Fri Sep 19 21:27:20 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Sep 19 21:28:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Sep 19 21:28:33 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Sep 19 21:28:52 2008
ERROR => W0 (pid 2636) died [dpxxdisp.c   14241]
ERROR => W1 (pid 2644) died [dpxxdisp.c   14241]
ERROR => W2 (pid 2652) died [dpxxdisp.c   14241]
ERROR => W3 (pid 1632) died [dpxxdisp.c   14241]
ERROR => W4 (pid 908) died [dpxxdisp.c   14241]
ERROR => W5 (pid 2660) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2668) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2676) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2684) died [dpxxdisp.c   14241]
ERROR => W9 (pid 640) died [dpxxdisp.c   14241]
ERROR => W10 (pid 2692) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2700) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 732) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:02 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Sep 19 15:59:02 2008
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2636 Ended         no      1   0             0
1 DIA     2644 Ended         no      1   0             0
2 DIA     2652 Ended         no      1   0             0
3 DIA     1632 Ended         no      1   0             0
4 DIA      908 Ended         no      1   0             0
5 DIA     2660 Ended         no      1   0             0
6 UPD     2668 Ended         no      1   0             0
7 ENQ     2676 Ended         no      1   0             0
8 BTC     2684 Ended         no      1   0             0
9 BTC      640 Ended         no      1   0             0
10 BTC     2692 Ended         no      1   0             0
11 SPO     2700 Ended         no      1   0             0
12 UP2      732 Ended         no      1   0             0
Dispatcher Queue Statistics               Fri Sep 19 15:59:02 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          10
wake_evt_udp_now     0
wake events           total     6, udp     2 ( 33%), shm     4 ( 66%)
since last update     total     6, udp     2 ( 33%), shm     4 ( 66%)
Dump of tm_adm structure:               Fri Sep 19 15:59:02 2008
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Sep 19 15:59:02 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:07 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc6_EC6_00                           < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name           MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
killing process (2628) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1508 (pos=2)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1508
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1536 (pos=3)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1536
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c   10259]
Good Bye .....

The work process are dying
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
This lead the dispatcher to emergency shutdow:
DISPATCHER EMERGENCY SHUTDOWN ***
if the dispatcher cannot start the work process it force the shutdown.So, you need to check
at the work process trace (dev_w*) files to find out the reason the they are dying.
@deeptss
if you are talking about the WARNING
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
this is a normal situation if the reverse name resolution is not working.
I have found this error when the DNS server has without the reverse zone configured.
However this is not a problem to the dispatcher operation.
Cheers
Clebio

FAIL: process disp+work.EXE Dispatcher not running

Hi All,
I've reinstalled OS and installed NW 7.01 ABAP Trial. The installation is fine (no error). At the time I "start application server" through "SAP NW 7.01 ABAP Trial Version => NSP => Start Application Server", it shows the error on command dos window as below:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
OK
============== Starting ABAP instance ...
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
12.10.2008 12:25:40
Start
OK
12.10.2008 12:25:50
StartWait
FAIL: process disp+work.EXE Dispatcher not running
============== Start operation timed out !
Press any key to continue . . .
Please help me out,
Peerasit

Clean uninstall and delete 'sapdb; and 'SAP' folders. Then reinstall again.

The CMS.exe is not working.

Hi all,
The CMS.exe is not working.
SIA is running and using port 6410.
CMS is not running, even that is using port 6400.
In the last log file of the CMS is see the following:
(err.m_IDSError == IDS_ERR_CMSSYSTEMDB_NODATABASECONNECTIONSAVAILABLE : Error refreshing CMS listeners: ).
The database look ok, so i guess there is somthing i can not see.
How can i find the issue with teh DB? or maybe it relates to somthing else....?
Thanks,
Doron

Hi Mandar,
Please check this:
Error:
The root server reported an error Initialization Failure. (Reason: CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)CMS system database is overloaded, please try again. If the problem persists, please contact the system administrator(FWB 00027)
Cause
Timeout while waiting for database resources.
Resolution
On the server machine, navigate to Central Configuration Manager (CCM).
Stop the Server Intelligence Agent (SIA).
Go to the properties of the SIA.
Navigate to 'Startup' tab.
In the 'Local CMS' section, double click on the Central Management Server, a 'Server Properties' dialog box would appear.
Add the switch -ndbqthreads 10 -maxobjectsincache 100000 at the end of the command line.
Start the SIA.
Please try the above steps and share your feedback.
Thanks,
Arun

TS1718 I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

I tried to update, did not work, unintstalled did not work. Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable. Looking for itunes64.msi path.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

My camera is working but does not work on skype how do I turn the camera on for Skype

My camer is working but does not work on skype how do I turn the camera on.

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Not able to connect with Sql Server Database

Hi,
I'm not able to connect with Sql Server database.during making connection I'm getting the following error:
"Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property."
Please help
Regards,
Neeraj Goel

Hi,
I'm using Sql Server 2000.
I downloaded the driver from the given site and still having the same problem. Do I need to copy the driver file in some specific folder.
Regards,
Neeraj Goel

SAP NetWeaver 7.0 ABAP Trial - service Disp+Work.Exe does not start

Hi All,
I have installed SAP NetWeaver 7.0 ABAP Trial Version on Windows Xp sp2.
But when I start sap management console, Disp+Work.Exe shows stopped and i am not able to connect through SAP login.
Any ideas?
Regards,
Mindaugas

The hostname should have 13 caracters at maximum, you will need to remove your installation (use the process below), change the hostname and install it again. It happened with me and after done this process it worked fine.
How to uninstall :
- Drop database: In order to do that go to the Control Panel click on 'Add and Remove Programs' and look for 'MaxDB'. Click on 'Change/Remove' which starts the Installation Manager of the MaxDB. Click on 'Remove MaxDB Components', select 'All Components' and enter the database manager user 'control' and your <password>. Quitt the dialog popup with 'yes'.
- Stop SAPNSP_00 service Go to the Control Panel, click on 'Administrative Tools' and stop the SAPNSP_00 service.
- Remove in your file system the directories of 'SAP' and 'sapdb'. Go to 'Program Files/Common Files' and remove the directory 'Installshield'.
- Run the [clean up |http://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/nw/regcleantools.rar] tool for the registry, press the radio button for 'Uninstall Service', enter 'NSP' for SID and '00' for the number.
- Connect your PC to the network or install the loopback adapter.
- Reboot your PC.

Program Files (x86) 32 bit iexplore.exe does not work--how do I fix/install

HP Pavilion Model #: p6404y
Product #: BK168AA-ABA
Software Build #: A1NAv6PrA6
OS: Windows 7 Home Edition 64 bit
Error Message: Installation Error
Problem/Issue: when attempting to activacte new Anti-virus program I purchased, the system is trying to use Internet Explorer in the Program Files (x86) 32 bit iexplore.exe (that does not work). The 64 bit - Program Files/Internet Explorer/iexplore.exe does work... How do I fix/install 32 bit version of IE back to my system (in this directory)?

Hi,
Try the following.
Click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off' and remove the tick next to Internet Explorer 9 Click Yes then OK and then when done, restart the PC.
When Windows has restarted, click the Start Menu and select Control Panel. Open Programs and Features, Click 'Turn Windows features on or off' and re-enter the tick next to Internet Explorer 9. Click Yes then OK and when this has finished installing, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MCPR.exe is not working, how can I delete McAfee Antivirus?

Hello - I am lost. I need to delete the McAfee Software completely. I need to install a different antivirus for business reasons. I removed the software in the programm list. But the new Antivirus was not working probably. So I deinstalled the new antivirus and I downloaded MCPR.exe but if I try to install as Admin nothing happens. What can I do? Many thanks for help!!

Download AppRemover then run it, it will uninstall any security app on your PC completely and get rid of all its registry entries to avoid future conflicts when installing a new Antivirus
Additionally, if you had already uninstalled the previous security solution, it has an option to simply clean out any left overs
This is a must have app I say! It saves you from formatting your computer just to install a new antivirus without any conflicts
ASUS G750JX-CV050H | i7-4700HQ @ 2.40 GHz. | 32 GB DDR3 1600 MHz. Hynix RAM | 256 GB LiteOn LCM-256M3S SSD + 1 TB Seagate Momentus ST1000LM024 5400 RPM HDD | GeForce GTX 770M 3 GB GDDR5 RAM | 17.3" Full HD 3D Glossy Screen

BExAnalyzer.exe does not work anymore after upgrade to FEP 3

Dear all,
after installing FEP 3 I noticed the following behaviour:
If I try to run the new Bex Analzer from the Menue (Start -> Programs -> Business Explorer -> Analyzer) nothing happens at all. Neither Excel does start, nor the Analyzer plugin is loaded at all. A start from C:\Program Files\SAP\Buiness Explorer\BI\BExAnalyzer.exe) does as well not work.
But running the Excel macro directly from C:\Program Files\Common Files\SAP Shared\BW\BExAnalyzer.xla starts Excel and the plugin is working as expected.
So the question is: is it a bug or a feature?
Best regards,
Andreas

I checked all components of the installation and everything seems to be ok. The only thing that I fell over is the statement
"Ensure that the BExAnalyzer Application has authority to create dll's in the user's temp folder"
Do I really have to take care of this? How? (I already disabled the virus scanner, but the result is the same - it's not working)...
Thanks,
Andreas
PS: Can someone tell me in more detail, what the BExAnalyzer.exe is trying to do?

Runtime.exe() is not working from within a jar file.

Hi All,
I have a jar file which have classes and a package in it.
One of these classes is calling another class which is present in the package.
The code i am using it is as follows:
Runtime r=Runtime.getRuntime();
Process p=null;
p=r.exec("java deep.slideshow.PlayShow");It is working fine when i am executing it without making jar file.
But when i make a jar file of all these things , this exec() is not working.
I have tried a lot.
If any body has any idea suggest me.
Thanks

thanks a lot for your reply friend.
I tried the same you tell me to do by using the cmd;
java -cp my.jar package.class And then tried to make the jar file with the help of eclipse,
after adding my jar file into classpath of my project in eclipse.
Its working fine on my local system.
But when i put this jar file on some other system it does not call my jar file(obviously bcz it will not the find the jar file according to the classpath set on my local system. )
Is there any way that i can keep this jar into my project and then can give the classpath dynamically
so that it can pick the file from my project automatically.?
Later on i will pack this whole thing into a full jar file and it will work on a single click.
Is it possible or not ?
Please suggest me.
Thanks

Java 7 U25 work around does not work for windows 8

I'm working on a java application which uses the statistical software R. This line Process p = Runtime.getRuntime().exec(C:\Program Files\R\R-2.15.1 + "/bin/" + "R CMD BATCH " + "./data/rJava.R"); in the application started throwing an error after the java 7 u25 update, but it was fixed by using the work around setting jdk.lang.Process.allowAmbigousCommands to true. This fix however does not work in windows 8, although the command does not error out with "cannot create process = 2" it just executes the line, but does nothing. But if I typed the command (R CMD BATCH " + "./data/rJava.R) directly into the commandline, it works perfectly. I've tried disabling the work around, and actually using suggested solutions in the release notes (see below), all worked in windows 7, but no success with windows 8. Any suggestions would be great
Process p = new ProcessBuilder("c:\\Program File\\foo.exe").start();
Process p = Runtime.getRuntime().exec(new String[] { "c:\\Program File\\foo.exe" });
Process p = Runtime.getRuntime().exec("\"c:\\Program File\\foo.exe\"");

avancentcisco - Win7 works fine with SSL VPN. But since we all were migrating to Win8, this was of no use to us. So we ditched SSL VPN all together.
IPSec VPN with Cisco VPN Client (version 5.0.07) works absolutely fine on Windows 8. Once you get the set up right, everything works fine (we are using full tunnel) including internet access.
If you struggle to get it working then let me know and I can help you out. There's not much info out there on the internet. I had to do it the hard way.

Camera is working but flash not working

My Camera is working but flashlight on my iphone 5 is not working just few days before. This phone was iOS 7.0.4 version. can you tell me why?

Hi Nassar Babu,
Does the flash work when you take a photo? You may have a damaged flash. You may also try to reset the phone by holding down the home button and the top right sleep/wake button for about 10 seconds to see if that resolves it for you. It's just a reboot sequence and won't hurt anything. If the flash does not work at all... you may need a hardware repair.

Disp+work.exe is not working in ecc6.0 with sql database

Similar Messages

Maybe you are looking for