Disp+work.exe - Running but dialog queue statistics unavailable

Hi,
We have two diferent instances in the same machine. One on them have disp+work.exe in yellow and show message "Running but dialog queue statistics unabailable". This is right, the queue statistics have no item to show, but I can login perfectly in sapgui and see the processes in tx sm50.
Where sapmmc read from? Instance profiles? Any other file?
Thanks for all.

Yes, problem solved.
I stopped windows instance service and overwrote the exe.
Thanks for all again

Similar Messages

  • Running but Dialog Queue info unavailable, J2EE: All processes running

    Dear SAP,
    I have start my SAP Solution Manager system. I can login.
    But the process disp+work.exe is in warning (yellow).
    I do have this warning :
    Running but Dialog Queue info unavailable, J2EE: All processes running
    Content of my dev_disp file :
    ================================================================================================
    Thu Sep 09 12:36:13 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1308
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.110.71:53609) [nixxi.cpp    4436]
    Network error of client T27, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T27 is 192.168.110.71(neo-l011.lia.local)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (28 BUEHLER 27 lia-l011 ) [dpxxdisp.c   12238]
    RM-T27, U28, 100     BUEHLER , lia-l011, 11:55:32, M1, W1, DSWP, 3/1
    Thu Sep 09 14:07:57 2010
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4436]
    ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1308
        (SI_ECONN_BROKEN/10054; I4; ST; 192.168.110.71:55886) [nixxi.cpp    4436]
    Network error of client T31, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
    Client address of T31 is 192.168.110.71(neo-l011.lia.local)
    ***LOG Q04=> DpRTmPrep, NiBufReceive (1967 31 lia-l011 ) [dpxxdisp.c   12238]
    RM-T31, U1967, 000             , lia-l011, 14:07:54, M0, W0, SESS, 2/0
    Thu Sep 09 16:47:41 2010
    DpHdlDeadWp: restart wp (pid=9220) automatically
    ================================================================================================
    Thanks
    Best regards
    NetAdmin

    Dear SAP,
    It was a kernel problem.
    Best regards

  • Dispatcher is running but dialog queue info unavailable

    R/S All,
    My production system has been recovered after a Windows O.S. crash. SAP application gets started & we are able to
    access the database through T-codes. But at SAP mmt I am gettting "dialog queue info unabailable" in yellow colour with Dispatch (dispwork.exe). My server config. is Win2k3IBMdb2_v.9.1 + ECC 6.0.
    Kindly guide me to reslove this.

    Hi,
    Kindly check through the below links where the same issue has been resolved. Also, kindly if any windows pacthes have been installed during the process of restoration. Update the kernel to the latest level for all i.e. after updating the kernel (DB and DB independent files) update the other latest files also (like R3trans, tp, dw* etc,,)
       disp+work.EXE (Dispatcher) - Running but Dialog Queue info unavailable,...
       Dispatcher  status: Running but dialog queue info unavailable ... yellow co
       Dispatcher - Running but Dialog Queue info unavailable
    Also, please provide the dev_disp log here.
    Regards,
    Sharath Babu M

  • Dispatcher  status: Running but dialog queue info unavailable ... yellow co

    Hi there,
    I just upgraded a SAP Kernel from:
    Old Kernel:  disp+work information
    kernel release                640
    kernel make variant           640_REL
    compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    compiled for                  64 BIT
    compilation mode              Non-Unicode
    compile time                  Aug 16 2007 21:11:21
    update level                  0
    patch number                  196
    source id                     0.196
    New Kernel:    disp+work information
    kernel release                640
    kernel make variant           640_REL
    compiled on                   NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00 for "
    NTAMD64"
    compiled for                  64 BIT
    compilation mode              Non-Unicode
    compile time                  Oct 10 2010 21:35:45
    update level                  0
    patch number                  350
    source id                     0.350
    I downloaded the files:
    SAPEXE_347-20001176.SAR
    SAPEXEDB_347-20001172.SAR
    And I extracted them and copied all files to  ...usr\sap\SID\SYS\exe\run and to ...usr\sap\SID\SYS
    exe\nuc\NTAMD64
    But the Dispatcher has the yellow status with the message: Running but dialog queue info unavailable.
    Any Idea?
    Thanks in advance.
    HanseAtik

    Hi,
    I just found out that it works fine now and want to share this with you:
    The solution is:
    I downloaded and extracted the file: dw_350-20001176.sar and copied everything to exe\run and ..exe\nuc\NTADM64.
    I am happy now and evey thing is green and the business must go on. I hope this will help other too...
    Best regards
    Hanseatik

  • Running but Dialog Queue info unavailable

    Hi friends,
      I installed ECC 5.0 on server2003(sql server).But now when disp+work.exe is started,this message is thrown out in MMC:"Running but Dialog Queue info unavailable".
      Although this message appear,I still can logon ECC.
      Below is developer trace in MMC for disp+work.exe:
    <i>----
    trc file: "dev_disp", trc level: 1, release: "640"
    Tue May 09 06:34:12 2006
    kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
    length of sys_adm_ext is 312 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, ASCII
    pid        192
    ***LOG Q00=> DpSapEnvInit, DPStart (00 192) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Tue May 09 06:34:17 2006
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          6624     (828)
    DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          192000     (384)
    DpShMCreate: sizeof(vmc_adm)          0     (320)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 03D10040, size: 2505416)
    DpShMCreate: allocated sys_adm at 03D10040
    DpShMCreate: allocated wp_adm at 03D117A8
    DpShMCreate: allocated tm_adm_list at 03D13188
    DpShMCreate: allocated tm_adm at 03D131B0
    DpShMCreate: allocated wp_ca_adm at 03F310F8
    DpShMCreate: allocated appc_ca_adm at 03F35748
    DpShMCreate: allocated comm_adm_list at 03F36EB8
    DpShMCreate: allocated comm_adm at 03F36ED0
    DpShMCreate: allocated vmc_adm_list at 03F65CD0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 03F65CF8
    DpShMCreate: allocated wall_adm at 03F65D00
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 1126 blocks reserved for free list.
    ES initialized.
    Tue May 09 06:34:19 2006
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( sheccsrv) [dpxxdisp.c   9736]
    Tue May 09 06:34:20 2006
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Tue May 09 06:34:35 2006
    MBUF state ACTIVE
    Tue May 09 06:34:36 2006
    DpModState: change server state from STARTING to ACTIVE
    </i>
    If anybody can solve this problem,I will be very thankful.

    OSS Note 72248
    Because the SAP service delivered with SAP MMC Snap-In draws considerably more information from the R/3 kernel currently running, identical information regarding various parameters must be available to both the SAP service as well as the R/3 kernel.Because the SAP service only reads the SAP start and default profile, the value changed in the instance profile for 'rdisp/elem_per_queue' cannot be recognized.
    Set 'rdisp/elem_per_queue' with identical value in the start profile too or make sure that this is set.
    You can check the value in ECC with transaction rz11 and look for 'rdisp/elem_per_queue'.
    With the right mouse button, click on the name of the machine in SAP MMC Snap-In and there select 'All tasks--> Restart service'.After a while, the dispatcher switches to the 'Green' status.

  • PI -Dispatcher - Running but Dialog Queue info unavailable

    Hi,
    In our PI dev server,
    1) We are observing the below warning..
    "Dispatcher - Running but Dialog Queue info unavailable"
    The dispatcher seems to running as well as the system is functioning properly.
    But sometimes we get Java heap size exceeding error. Also the Maintenence_ORA certificate has expired.
    2) Also we have observed the below error during cache refresh
    "Failed to read sld instance name"
    I went through some of the blogs and got to know that Kernel upgrade could be one of the solutions to point 1.
    But our PI server is already 7.1 EHP 1 and at patch level 135. (N-1 available in marketplace).
    Also let me know how relevant Maintenence_ORA certificate is ?
    Kindly suggest solutions for points 1 and 2.

    hi Prit,
    If your PI is a NT server you can read the note Note 72248 - NT: Dispatcher in status 'Yellow',SAP system running.
    kind regards.

  • Running but dialog queue info unavailable,j2ee status info unavailable

    HI ,
    We have a solution manager instance.It has both java and abap.  The problem now is     The dispatcher in the processlist    is displaying the error  "  the instance is running but dialog queue info unavailable,j2ee status info unavailable "    and the instance status is staying in yellow color.
    Guys anyone can suggest me regarding this issue..
    Thanks in advance,
    Chandana.

    Hi,
    Please check whether user id SAPJSF is locked or not. If it is not locked the please check below trace files  dev_dispatcher,std_server#.out,dev_jcontrol,std_dispatcher.out.
    Also refer SAP note 723909 - Java VM settings for J2EE 6.40/7.0
    Below thread may help you.
    J2EE status info unavailable
    Thanks,
    Sushil

  • Running but Dialog Queue info unavailable  - In MMC- CKernel 700 -  SuPK133

    Hi All
    I have reciently upgraded our ECC Kernel to the latest version (SP 133) and now in the SAP MMC the status is yellow and I am getting the following message:
    Running but Dialog Queue info unavailable
    HAs anyone seen this or know how to fix it?
    Thanks in advance
    Phil

    Sorted:
    See this [Dispatcher - Running but Dialog Queue info unavailable;

  • Disp+work.exe running but meesage server unreachable

    Hi Guys,
    i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as "Running but message server unreachable". as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.
    any help would be appreciated
    Thanks,
    srini
    Message was edited by:
            raj reddy

    hi ,
       plz help me .
      dispatcher is running but cannot be connected to the message server
    in dev_disp, the following error exists
    Wed Oct 09 09:38:56 2013
    *** ERROR => [DpProcDied] Process died  (PID:248  HANDLE:956  rc:0x0) [dpnttool2.c  147]
    DpHalt: wait for end of icman
    DpHalt: waiting for termination of icman ...
    Wed Oct 09 09:38:57 2013
    *** ERROR => [DpProcDied] Process died  (PID:2844  HANDLE:964  rc:0x0) [dpnttool2.c  147]
    DpHalt: not attached to the message server
    DpHalt: cleanup EM
    ***LOG Q05=> DpHalt, DPStop ( 2688) [dpxxdisp.c   11380]

  • Disp+work.exe running but  Message Server Unreachable

    Hi all,
      I am new bee to this forum. can anybody guide me about this problem. i was working around for the past 4 days. still i was not able to find out the solution for this problem. when i am trying to connect SAP Server through SAPGUI, it was not connecting. i cross check with SAP MMC in the process list only one process was running (Message service) remaing processes were stopped. but disp+work.exe was running but with error message as <b>"Running but message server unreachable"</b>. as per my knowledge this may be problem with sapmsg.ini. plz let me know how to fix this problem.

    Hi!
    I have same problem after installation SAPNW7. TrialSP12.
    I'm running virtual MS Windows SP2 using VMWare Workstation 8.0
    dev_ms is attached.
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 3436] Sat May 12 11:17:33 2012
    [Thr 3436] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        3432
    [Thr 3436] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3432) [msxxserv.c   1824]
    [Thr 3436] MsInitAclInfo: acl file D:\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 3436] MsGetOwnIpAddr: my host addresses are :
    [Thr 3436]   1 : [10.10.0.10] sap.localhost (HOSTNAME)
    [Thr 3436]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 3436]   3 : [192.168.238.128] allon-51c22207c.corp.loc (NILIST)
    [Thr 3436] MsHttpInit: full qualified hostname = sap.localhost
    [Thr 3436] HTTP logging is switch off
    [Thr 3436] set HTTP state to LISTEN
    [Thr 3436] MsHttpOwnDomain: own domain[1] = localhost
    [Thr 3436] ms/icf_info_server : deleted
    [Thr 3436] *** I listen to port sapmsNSP (3600) ***
    [Thr 3436] *** I listen to internal port 3900 (3900) ***
    [Thr 3436] *** HTTP port 8100 state LISTEN ***
    [Thr 3436] CUSTOMER KEY: >I1895797210<
    [Thr 3436] Sat May 12 11:28:22 2012
    [Thr 3436] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.0.10) after 300 secs received [msxxserv.c   3165]
    [Thr 3436] *** ERROR => MsSCheckConnections: disconnect now [10.10.0.10] [msxxserv.c   3169]
    Regards,
    Olga.

  • Problem starting SAP: disp+work.EXE Running but bad dialog queue time

    Hello,
    I have been trying to start my SAP test instance on a local computer, but it does not work. I can see "Running but bad dialog queue time: 12.00 sec". This was working a few weeks ago, but  now it doesn't anymore. My initial assumption was the database was filled, but I checked that and it seems ok, there  is still space for data and logs...
    I have checked the dev_disp log and I can see these:
    *** ERROR => DpHdlDeadWp: W0 (pid 7540) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W1 (pid 6008) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W2 (pid 2412) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W3 (pid 7284) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W4 (pid 1340) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W5 (pid 4088) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W6 (pid 304) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W8 (pid 2120) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W9 (pid 5392) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W10 (pid 6140) died (severity=0, status=0) [dpxxwp.c    1531]
    *** ERROR => DpHdlDeadWp: W11 (pid 2996) died (severity=0, status=0) [dpxxwp.c    1531]
    Then I checked the log for W0 and I think this is the problem:
    M  ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3286]
    M  *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1276
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3286]
    M  *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
    M  *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5137]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c  11313]
    The connections are refused for some reason, I don't know why. Can anyone help? I am attaching the log files...

    Hi
    As per your work process trace (dev_w0), it is not able to reach icm port 65000
    M Mon Aug 11 10:27:39 2014
    M  ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3286]
    M  *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1260
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3286]
    M  *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
    M  *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5137]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11313]
    to fix this error, follow below 2  SAP KBAs ;
    1934023 - Application server startup fail with an ICM connection error
    1900647 - Parameter icm/admin_port
    regards
    Swami

  • "Running but Dialog Queue info unavailable"  with MMC "yellow" status

    after I update my SCM server's WAS 620 kernel patch to 1271,this error apears in MMC disp+work.
    and I have check notes ,find note "72248"
    but after follow the note, and add the parameter"rdisp/elem_per_queue"=2000 (default vealue) in profile ,the note do not work.
    Any idea?someone
    Best Regards

    I download latest kernel patch 1773, problem solved

  • Disp+work.exe Running but not connected to Message server

    Dear All,
    I install SAP NetWeaver 7.0 ABAP Trial Version on my PC (Win XP SP2, Proc 2.4 GHZ, RAM 1 GB) installation success, but when I start the application server through mmc the dispatcher failed to start.
    I've tried to restart my machine, the problem still there.....
    Please help me to fix this problem...
    Thanks.
    Endi

    I got the same error, anyone can help ???

  • Disp+work goes yellow with message:  running but dialog queue standstill

    I just installed CRM 7.0 on Windows with MaxDB 7.7.04 build 28. After the installation I was able to logon and begin applying support packs. In the middle of doing this, the system hung and I noticed the disp+work went yellow with the message "Running but dialog queue standstill". I shut down the system, rebooted the machine and started up again. The same error is occuring. Here are some log files:
    adatmp:
    Error! Connection failed to node sitaserv23 for database CRE:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\CRE.dbm.shi, requested size 2600
    stderr1:
    C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
    C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
    C:\usr\sap\CRE\DVEBMGS02\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
    C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" db_state 1>adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "ONLINE" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" dbm_version VERSION 1>adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.2" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.3" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.4" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.5" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.6" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.7" adatmp
    Error: Database CRE NOT started !
    I tried applying note 1041650 but this seems to be for UNIX. I don't know how to clear memory in Windows 2003 server.
    I updated the kernel to 117 with disp+work at 130. Still the same.
    Please help.
    Thanks,
    Peggy

    Here is the result
    db_state
    OK
    ONLINE
    x_cons <SID> sh ac
    SERVERDB: CRE
    ID   UKT  Win   TASK       APPL Current         Timeout Region     Wait
              tid   type        pid state          priority cnt try    item
    T113   8  0x8F0 User        956 LOG FULL (246) !      0 0               11514(s)
    So I can see that it is full.  What can I do to increase the size and/or turn off logging?
    Thanks!

  • Disp+work goes yellow with:  Running but dialog queue standstill

    I just installed CRM 7.0 on Windows with MaxDB 7.7.04 build 28.  After the installation I was able to logon and begin applying support packs.  In the middle of doing this, the system hung and I noticed the disp+work went yellow with the message "Running but dialog queue standstill".  I shut down the system, rebooted the machine and started up again.  The same error is occuring.  Here are some log files:
    adatmp:
    Error! Connection failed to node sitaserv23 for database CRE:
    -24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
    -24832,ERR_SHMNOTAVAILABLE: Shared memory not available
    -24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\CRE.dbm.shi, requested size 2600
    stderr1:
    C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
    C:\usr\sap\CRE\DVEBMGS02\work>set DBNAME=CRE
    C:\usr\sap\CRE\DVEBMGS02\work>if "" == "" (set DB_USERKEY="c" )  else (set DB_USERKEY="c_J2EE" )
    C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c" db_state  1>adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "ONLINE" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>dbmcli -U "c"  dbm_version VERSION   1>adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.2" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.3" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.4" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.5" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.6" adatmp
    C:\usr\sap\CRE\DVEBMGS02\work>findstr "7\.7" adatmp
    Error: Database CRE NOT started !
    I tried applying note 1041650 but this seems to be for UNIX.  I don't know how to clear memory in Windows 2003 server.
    I updated the kernel to 117 with disp+work at 130.  Still the same.
    Please help.
    Thanks,
    Peggy

    Hi,
    Its better to put log archive in over write mode while installation to avoid these issues.
    Regards,
    Sahil Garg

Maybe you are looking for

  • Transferring some files from old hard drive to new mac book pro: How do I do this?  I bought a SATA Wire, and can't figure out how to get my files

    Hi there, my old mac book recently died and I opted to buy a new macbook pro, instead of pouring lots of money into the old computer.  I was able to get my hard drive out, and I bought a 2.5" Sata Nootbook Drive Upgrade Kit.  I have also installed su

  • Old .mov files not viewable in qt for 10.4.3

    i have several quicktime (.mov) files from a digital camera that work fine in 10.3.9 with qt 7.0.1. i recently bought a new powerbook and the video portion of the movies is not displayed (audio is ok). any ideas?...

  • How can I get rid of it.

    I'm so sorry but I absolutely hate this new safari 4. How can I remove it. How can I get my old one back. These Black flashy pages are a strictly "disaster" they soak up all the the light and make everything unreadable. I cannot find my simple book m

  • SAP GUI - SAP Businee Client - Portal Comparison

    Hi , We would like to know what are the advantages and disadvantages of NW Business client over portal and normal SAP GUI in all the aspects such as development,performance . what is the general/rule of thumb difference between development for SAP BC

  • What happens if I reset cache on iTunes?

    I have iTunes 10.3.1 I want to know What happens if I reset cache on iTunes? also, I have deleted every photo on my iPhone, and iTunes says that I still have 1.22 GB of photos, is it wrong?, or there can be hidden photos some were in my iPhone?