Disparity in reported size on same content on 2 disks

I have cc cloned a folder from one disk to another, just before I deleted the content from the original, I checked to see it had all copied with a get info on each file.
There would appear to be nothing missing but the file size of the two is massively different, can anyone shed any light on why this might be?
Thanks.

I think I've answered my own question, scarily, a lot of the content is showing as a file but with zero bytes, nearly deleted all the original files.

Similar Messages

The report displays more than 3000 pages with same content.

Respected Sir
I have a report with form letter layout.
The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
please anyone give a solution to this problem

I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
Why this problem occurs. How can we solve it.
Bye

Same content, two books each with its own page size -- best way to manage?

Does anyone have any suggestions for producing two FrameMaker books that:
Contain identical content that must also be periodically updated
Must be delivered as two separate PDF books, each book having a different page size
I'm familiar with migrating FrameMaker content from one page size to another: Create a new chapter template of the desired size, then import styles, etc., and content into that new template.
But IF one must deliver the same content in two different books, AND each book using a different page size (U.S. Letter and B5), AND the content is periodically updated and maintained, THEN what's the best way to manage that same content, two different page-sizes delivery problem?
PDFs are generated from FrameMaker 7 or 8 (we have both) via Adobe Distiller 9.
Cheers & thanks for your help,
Riley

Use three directories - one for the master FM document, and one "build" directory for each of the formats you need. When it's time to build, copy all the files into the relevant build directory and do your stylesheet applying, book regenerating, and printing in the build directory.
If you decide to handle it in FrameMaker (rather than Acrobat), then use two stylesheets - one with all the formats you need and letter-sized pages, and one with no formats and with B5 sized pages. This way you only need to manage one stylesheet for most formatting controls (except page layouts), and you only need to import the page layouts when you want to build a document or "toggle" it between different page sizes. How similar these two stylesheets are to each other (on the master pages) depends on how much you think you can get away with:
If the page sizes are similar, use different pages sizes but identical text frames on the master pages if you can. This would give you identical pagination although the margins would be different. You might be able to find an optimum "compromise" text frame size that fits both page sizes reasonably well.
If you can't use the same text frame sizes on the master pages, then of course your pagination is going to change, but at least try to use text frames that are the same WIDTH. This avoids needing to manually adjust side-head areas, pictures, and table widths every time you change the page size.

Solution Found - Media Go Synching Same Content Repeatedly

Problem - Media Go syncs same content to phone regardless of whether the content is currently on the device. This can lead to synching your library every time you open Media Go.
Known Phones Affected: Xperia Arc, Ray, Mini
Solution: Download Media Go version 1.8, currently available here:
http://media-go.software.informer.com/screenshot/241893/
Tested: May 9 2012
Hi all,
I have the Xperia Mini but I have found threads with different phones having the same problem. I've just uninstalled 2.1 and installed 1.8 and my phone syncs PERFECTLY with Media Go. Media Go finds what media is on my phone then ignores synching that and only syncs what is missing. (finally!)
I have spotted some duplicates but I think I know why that is - for example, in iTunes, if I imported a CD while not connected to the Internet, it says track 1 track 2 etc. If using Media Go you clicked find media info. on Gracenote, it finds the track names then creates a copy of each song with the new info, whil ALSO synching track 1 track 2 because that is what is in iTunes. Get me so far? I think it's best that you don't use Gracenote to update your files, if you want to sych exactly iTunes to Xperia phone...
Well this solved the sync problem for me. I have the Xperia Mini...the others are also 2011 phones...this is important for the Media Go devs to know. Please report if this works for you or not!
Good luck!
P.S. I have been testing version 2.0 and 3 times it syched with my phone correctly. Perhaps it's just the latest version 2.1 that creates problems? I will continue testing...version 2.0 can be found here: http://media-go.software.informer.com/2.0/

I will definitely forward this. Thank you for this update.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Reports Size (URgent) !!!

Hi
Does anybody have solutions to the following :
1) If the report size (REPORTS 3.0) is more than 4MB & after
saving the report & re-opening the same, I find some fields
missing in the layout editor.
2) How do I supress system error message in Reports 3.0 ?
Any help in this regard will be appreciated.
Thanks in advance
Regards
Sridhar Shankar.
null

Hi,
The Reports 6.0.8.8.3 is base version. There is lot of character mode bug fixes between base and latest patch. Please apply latest patch-13 and try it.
Thanks
Oracle Reports Team.

Show the report on the same dashborad page with the folder tree?

I add a folder in dashboard, and put it on the left.
now i open the folder tree in dashboard, and click a report,
but biee open the report on a new page.
I want to show the report on the same page with the folder,
maybe show the report on the right in the dashboard with the folder.
how could it be done?
thanks ,
newkoa

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

Report Size to fit Chart Size

Using the dynamic width and dynamic height properties of a chart I will change the size of the chart dynamically.
However, when exporting the chart to an image I want it to export at the chart size and not be restricted to the static size of the page.
Any way to do this ?

Hi St33ln,
If I understand correctly, you want to make the size of report to fit the size of chart, so the chart can be fully displayed after export the report to an image. Based on my research, I find that PageSize property is a static value. The page size does not
grow or shrink to accommodate the contents of the report body. If you want the report to appear on a single page, all the content within the report body must fit on the physical page.
So in your scenario, I couldn’t find an appropriate method to make the report size automatically change to fit the chart size. This is by design. As a workaround, I suggest that you can change the size of report to an appropriate value based on the chart
size you may select.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Report size inconsistency

Hi All,
I have a report that shows 'sales count' vs 'jurisdiction' on a pie chart. If there is only one jurisdiction, the chart size is considerably larger than when it has two or more jurisdiction. The same does not happen for other reports with the same scenario. It comes consistently in other reports.
Regards
Arun

Hi,
try this.
insert a small jpg which is black or white completely (Use irfanview f.e. to create).
make a rigkt mouseclick on this black jpg.
change the location where the jpg is stored to the correct location of your jpg.
now the report should besmall, because it is stored only with the small black rectangle.
sincerly
zettels.

How to implement two different websites with one section that has the same content?

I have two sister websites, each for a separate but related department in a hospital. On each of these websites, I have a main tab called library, which has about 30 pages within it for related healthcare issues. The library is the exact same content on each site, but the main navigation and header for the site is obviously different. I have been upkeeping this identical content on both sites (if something is changed, then I have to do it twice). This isn't efficient and I would like to find a way to combine them somehow. I don't have a ton of experience but I catch on pretty quickly and I basically need ideas for the best way to handle this. I have considered creating a third site, and the library tab on each of the other sites would take you to this new site. I have also wondered if there is a way to embed duplicate content into two separate pages (maybe with an iframe). That way I would update the original file and it would be updated on both sites.
The sites also have different body sizes. One is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you all recommend I handle this? I use Dreamweaver CS6 and my pages are all HTML

I looked into Server Side Includes and I think I would like to try it, but I can't seem to get it working. The problem is both of my sites are under a separate domain but hosted the same way I believe. For instance, I have two dreamweaver sites, but when I use my FTP, I have one large folder for the main site, then the sister site is in a folder within the main site folder. Although you can get to the main site using www.ukneurology.com, you can also get to the site using kyneurosurgery.com/neurology/index.html. I think this is what is messing me up because I can't seem to get it to work right.

Increase the font size of a Content Query Web part

Hi - I have been trying to increase the font size of one of my Content Query web parts, I've had a look at your articles however I am unsure where to insert the lines of code. Unfortunately I am not a programmer however I need to be able to increase the
font size, please can you assist?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/d0cfd348-c9d0-43b7-bd00-3bb17d612ea0/increase-font-size-of-the-content-query-web-part?forum=sharepointgeneralprevious
Kind Regards
Natasha

Hi Natasha, Do you have multiple Content Query Web Parts on the same page? If so, are you looking to change the font on all of these or just a specific one?
Also, are you looking to make this change to your entire site or only a specific page?
Dimitri Ayrapetov (MCSE: SharePoint)

OBIEE report based on same criteria but different view based on filter

Hi,
I am trying to create a report in OBIEE 11.1.1.5 where In the same report using the same criteria, I can have different views which applies different filter.
Suppose, I have a report criteria as
Dim1, Dim2, Measure1, Measure 2.
I want to create two pivot view based on the same data.
One view will be showing data Dim1="Value1". The other view is duplicate of this view but will show data Dim1="Value2".
Is it possible in OBIEE?
basically what I want is work on the same dataset but different representation and show them in the same report. Please share your opinion.
Regards,
Tanveer.

Hi,
You create a new dim dummy column in criteria and in presentation level create new pivot table view use this dummy dimension column and filter with dim1=value2.
give updates on this.
Mark if Helpful/correct.
Thanks.

Parameters and report on the same page

I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
Rek

Sounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet

More than one reports at the same time?

Hello
Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
Nametullah kalair

Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
Regards,
Nametullah kalair

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

Disparity in reported size on same content on 2 disks

Similar Messages

Maybe you are looking for