Dispatcher Error

Hi,
I've installed SAPNW7.0ABAPTrialSP12. I get an error during the installation, and uninstall this by the uninstall instructions (start.htm - last slide). When I try to install it again, the installation time was too quickly and searching in SDN forums I found the solution that was to delete Installshield folder from my Commom Files folder. After this, I've installed again and the instalation time was up to 1 hour (normal time). Then I tried to up my server several times, so I've opened my services file and look that some entries is missing (I think that my error is caused by this).
My machine:
Windows XP SP2
MacBook Black - 2GHZ Core 2 Duo - 1GB RAM - 30GB free space
Loopback Adapter is installed and configured to DHCP and fixed IP with 10.10.0.10 value (by SAP instructions)
Hostname: brmb2000
Host file have an entry: 10.10.0.10 brmb2000
My services file:
# Copyright (c) 1993-1999 Microsoft Corp.
# This file contains port numbers for well-known services defined by IANA
# Format:
# <service name>  <port number>/<protocol>  [aliases...]   [#<comment>]
echo                7/tcp
echo                7/udp
discard             9/tcp    sink null
discard             9/udp    sink null
systat             11/tcp    users                  #Active users
systat             11/tcp    users                  #Active users
daytime            13/tcp
daytime            13/udp
qotd               17/tcp    quote                  #Quote of the day
qotd               17/udp    quote                  #Quote of the day
chargen            19/tcp    ttytst source          #Character generator
chargen            19/udp    ttytst source          #Character generator
ftp-data           20/tcp                           #FTP, data
ftp                21/tcp                           #FTP. control
telnet             23/tcp
smtp               25/tcp    mail                   #Simple Mail Transfer Protocol
time               37/tcp    timserver
time               37/udp    timserver
rlp                39/udp    resource               #Resource Location Protocol
nameserver         42/tcp    name                   #Host Name Server
nameserver         42/udp    name                   #Host Name Server
nicname            43/tcp    whois
domain             53/tcp                           #Domain Name Server
domain             53/udp                           #Domain Name Server
bootps             67/udp    dhcps                  #Bootstrap Protocol Server
bootpc             68/udp    dhcpc                  #Bootstrap Protocol Client
tftp               69/udp                           #Trivial File Transfer
gopher             70/tcp
finger             79/tcp
http               80/tcp    www www-http           #World Wide Web
kerberos           88/tcp    krb5 kerberos-sec      #Kerberos
kerberos           88/udp    krb5 kerberos-sec      #Kerberos
hostname          101/tcp    hostnames              #NIC Host Name Server
iso-tsap          102/tcp                           #ISO-TSAP Class 0
rtelnet           107/tcp                           #Remote Telnet Service
pop2              109/tcp    postoffice             #Post Office Protocol - Version 2
pop3              110/tcp                           #Post Office Protocol - Version 3
sunrpc            111/tcp    rpcbind portmap        #SUN Remote Procedure Call
sunrpc            111/udp    rpcbind portmap        #SUN Remote Procedure Call
auth              113/tcp    ident tap              #Identification Protocol
uucp-path         117/tcp
nntp              119/tcp    usenet                 #Network News Transfer Protocol
ntp               123/udp                           #Network Time Protocol
epmap             135/tcp    loc-srv                #DCE endpoint resolution
epmap             135/udp    loc-srv                #DCE endpoint resolution
netbios-ns        137/tcp    nbname                 #NETBIOS Name Service
netbios-ns        137/udp    nbname                 #NETBIOS Name Service
netbios-dgm       138/udp    nbdatagram             #NETBIOS Datagram Service
netbios-ssn       139/tcp    nbsession              #NETBIOS Session Service
imap              143/tcp    imap4                  #Internet Message Access Protocol
pcmail-srv        158/tcp                           #PCMail Server
snmp              161/udp                           #SNMP
snmptrap          162/udp    snmp-trap              #SNMP trap
print-srv         170/tcp                           #Network PostScript
bgp               179/tcp                           #Border Gateway Protocol
irc               194/tcp                           #Internet Relay Chat Protocol       
ipx               213/udp                           #IPX over IP
ldap              389/tcp                           #Lightweight Directory Access Protocol
https             443/tcp    MCom
https             443/udp    MCom
microsoft-ds      445/tcp
microsoft-ds      445/udp
kpasswd           464/tcp                           # Kerberos (v5)
kpasswd           464/udp                           # Kerberos (v5)
isakmp            500/udp    ike                    #Internet Key Exchange
exec              512/tcp                           #Remote Process Execution
biff              512/udp    comsat
login             513/tcp                           #Remote Login
who               513/udp    whod
cmd               514/tcp    shell
syslog            514/udp
printer           515/tcp    spooler
talk              517/udp
ntalk             518/udp
efs               520/tcp                           #Extended File Name Server
router            520/udp    route routed
timed             525/udp    timeserver
tempo             526/tcp    newdate
courier           530/tcp    rpc
conference        531/tcp    chat
netnews           532/tcp    readnews
netwall           533/udp                           #For emergency broadcasts
uucp              540/tcp    uucpd
klogin            543/tcp                           #Kerberos login
kshell            544/tcp    krcmd                  #Kerberos remote shell
new-rwho          550/udp    new-who
remotefs          556/tcp    rfs rfs_server
rmonitor          560/udp    rmonitord
monitor           561/udp
ldaps             636/tcp    sldap                  #LDAP over TLS/SSL
doom              666/tcp                           #Doom Id Software
doom              666/udp                           #Doom Id Software
kerberos-adm      749/tcp                           #Kerberos administration
kerberos-adm      749/udp                           #Kerberos administration
kerberos-iv       750/udp                           #Kerberos version IV
kpop             1109/tcp                           #Kerberos POP
phone            1167/udp                           #Conference calling
ms-sql-s         1433/tcp                           #Microsoft-SQL-Server
ms-sql-s         1433/udp                           #Microsoft-SQL-Server
ms-sql-m         1434/tcp                           #Microsoft-SQL-Monitor
ms-sql-m         1434/udp                           #Microsoft-SQL-Monitor               
wins             1512/tcp                           #Microsoft Windows Internet Name Service
wins             1512/udp                           #Microsoft Windows Internet Name Service
ingreslock       1524/tcp    ingres
l2tp             1701/udp                           #Layer Two Tunneling Protocol
pptp             1723/tcp                           #Point-to-point tunnelling protocol
radius           1812/udp                           #RADIUS authentication protocol
radacct          1813/udp                           #RADIUS accounting protocol
nfsd             2049/udp    nfs                    #NFS server
knetd            2053/tcp                           #Kerberos de-multiplexor
man              9535/tcp                           #Remote Man Server
#sapdp01  3201/tcp
#sapmsBC1      3602/tcp
#sapmsBC2        3600/tcp
#sapmsBC3      3600/tcp
#sapmsCR1         3671/tcp
#sapmsCR2         3672/tcp
#sapmsCR3         3673/tcp
#sapmsCR4         3671/tcp
sapmsNSP      3600/tcp
sql6           7210/tcp
sapdbni72          7269/tcp
sql30           7200/tcp # SAP DB
vmake           7792/tcp # SAP DB
sapdp00 3200/tcp
Follow the developer trace of disp+work.exe that is stopping after few seconds:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        NSP
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    95
intno      20050900
make:      multithreaded, ASCII, optimized
pid        1820
Wed Oct 10 09:57:21 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1820) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 95 successfully loaded
     shared lib "dw_xtc.dll" version 95 successfully loaded
     shared lib "dw_stl.dll" version 95 successfully loaded
     shared lib "dw_gui.dll" version 95 successfully loaded
     shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3900
*** ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c  5217]
Wed Oct 10 09:57:31 2007
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 10 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >brmb2000_NSP_00                         <
DpShMCreate: sizeof(wp_adm)          6328     (904)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1280)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 05A20040, size: 4205552)
DpShMCreate: allocated sys_adm at 05A20040
DpShMCreate: allocated wp_adm at 05A21A28
DpShMCreate: allocated tm_adm_list at 05A232E0
DpShMCreate: allocated tm_adm at 05A23310
DpShMCreate: allocated wp_ca_adm at 05D935A0
DpShMCreate: allocated appc_ca_adm at 05D93A50
DpShMCreate: allocated comm_adm at 05D93F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05E14DB0
DpShMCreate: allocated gw_adm at 05E14DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05E14E20
DpShMCreate: allocated wall_adm at 05E14E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Wed Oct 10 09:57:32 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( brmb2000) [dpxxdisp.c   11663]
DpStartStopMsg: send start message (myname is >brmb2000_NSP_00                         <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Wed Oct 10 09:58:12 2007
*** ERROR => W0 (pid 2232) died [dpxxdisp.c   14318]
*** ERROR => W1 (pid 1320) died [dpxxdisp.c   14318]
*** ERROR => W2 (pid 3068) died [dpxxdisp.c   14318]
my types changed after wp death/restart 0x9f --> 0x9e
*** ERROR => W3 (pid 3168) died [dpxxdisp.c   14318]
my types changed after wp death/restart 0x9e --> 0x9c
*** ERROR => W4 (pid 1596) died [dpxxdisp.c   14318]
my types changed after wp death/restart 0x9c --> 0x98
*** ERROR => W5 (pid 3196) died [dpxxdisp.c   14318]
my types changed after wp death/restart 0x98 --> 0x90
*** ERROR => W6 (pid 3160) died [dpxxdisp.c   14318]
my types changed after wp death/restart 0x90 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:22 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Wed Oct 10 12:58:22 2007
========================
No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
0 DIA     2232 Ended         no      1   0             0                                                             
1 DIA     1320 Ended         no      1   0             0                                                             
2 DIA     3068 Ended         no      1   0             0                                                             
3 UPD     3168 Ended         no      1   0             0                                                             
4 ENQ     1596 Ended         no      1   0             0                                                             
5 BTC     3196 Ended         no      1   0             0                                                             
6 SPO     3160 Ended         no      1   0             0                                                             
Dispatcher Queue Statistics               Wed Oct 10 12:58:22 2007
===========================
+------+--------+--------+--------+--------+--------+
|  Typ |    now |   high |    max | writes |  reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      0 |      2 |   2000 |      5 |      5 |
+------+--------+--------+--------+--------+--------+
|  DIA |      4 |      4 |   2000 |      4 |      0 |
+------+--------+--------+--------+--------+--------+
|  UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
|  ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
|  BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
|  SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
|  UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id          10
wake_evt_udp_now     0
wake events           total     6,  udp     6 (100%),  shm     0 (  0%)
since last update     total     6,  udp     6 (100%),  shm     0 (  0%)
Dump of tm_adm structure:               Wed Oct 10 12:58:22 2007
=========================
Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
Workprocess Comm. Area Blocks               Wed Oct 10 12:58:22 2007
=============================
Slots: 20, Used: 1, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher  |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:27 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >brmb2000_NSP_00                         < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2888) (SOFT_KILL)
*** ERROR => DpProcKill: kill failed [dpntdisp.c   371]
Stop icman
killing process (2868) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process died  (PID:2888  HANDLE:1600)
wait for end of icman
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:28 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:29 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:30 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:31 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:32 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:33 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:34 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:35 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:36 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:37 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2868  HANDLE:1616)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 10 09:58:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died  (PID:2868  HANDLE:1616)
DpStartStopMsg: send stop message (myname is >brmb2000_NSP_00                         <)
NiIMyHostName: hostname = 'brmb2000'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER                             
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Oct 10 09:58:40 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1564 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1564 (pos=2)
SiSelNRemove: removed sock 1564
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1564
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1820) [dpxxdisp.c   10333]
Good Bye .....

<b>DEFAULT.PFL</b>
[code]
Template for ABAP DEFAULT.PFL
SAPDBHOST = brmb2000
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = brmb2000
dbms/dbadminurl = http://brmb2000:9999/webdbm?Server=brmb2000&Database=NSP&User=control
rdisp/bufrefmode = sendoff,exeoff
SAP Messaging Service for ABAP
rdisp/mshost = brmb2000
rdisp/msserv = sapmsNSP
rdisp/msserv_internal = 3900
login/system_client = 000
[/code]
<b>NSP_DVEBMGS00_BRMB2000</b>
[code]
Template for ABAP SID_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = brmb2000
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PHYS_MEMSIZE = 128
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_spo = 1
rdisp/enqname = brmb2000_NSP_00
rdisp/myname = brmb2000_NSP_00
abap/buffersize = 100000
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/installed_languages = ED
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 250000
rdisp/PG_SHM = 100
rdisp/ROLL_SHM = 100
rdisp/autoabaptime = 0
rdisp/bufrefmode = sendoff,exeoff
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 300
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
icm/host_name_full = localhost
mpi/total_size_MB = 10
auth/new_buffering = 1
sapgui/user_scripting = TRUE
ssf/name = SAPSECULIB
ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
login/ticket_only_to_host = 1
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP
[/code]
<b>START_DVEBMGS00_BRMB2000</b>
[code]
Template for ABAP START_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = brmb2000
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_PROFILE = C:\SAP\NSP\SYS\profile
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PF = $(DIRPROFILE)\NSP_DVEBMGS00_brmb2000
Start ABAP database
DB = $(DIRCT_RUN)\strdbs.cmd
Start_Program_00 = immediate $(_DB) NSP
Start SAP messaging service
MS = $(DIREXECUTABLE)\msg_server$(FT_EXE)
Start_Program_01 = local $(_MS) pf=$(_PF)
Start application server
DW = $(DIREXECUTABLE)\disp+work$(FT_EXE)
Start_Program_02 = local $(_DW) pf=$(_PF)
Start internet graphics server
#_IG = $(DIR_EXECUTABLE)\igswd$(FT_EXE)
#Start_Program_03 = local $(_IG) -mode=profile pf=$(_PF)
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP
[/code]
<b>START_DVEBMGS00_BRMB2000.0</b>
[code]# Template for ABAP START_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = brmb2000
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_PROFILE = C:\SAP\NSP\SYS\profile
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PF = $(DIRPROFILE)\NSP_DVEBMGS00_brmb2000
Start ABAP database
DB = $(DIRCT_RUN)\strdbs.cmd
Start_Program_00 = immediate $(_DB) NSP
Start SAP messaging service
MS = $(DIREXECUTABLE)\msg_server$(FT_EXE)
Start_Program_01 = local $(_MS) pf=$(_PF)
Start application server
DW = $(DIREXECUTABLE)\disp+work$(FT_EXE)
Start_Program_02 = local $(_DW) pf=$(_PF)
Start internet graphics server
#_IG = $(DIR_EXECUTABLE)\igswd$(FT_EXE)
#Start_Program_03 = local $(_IG) -mode=profile pf=$(_PF)
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP
[/code]
<b>Services</b>
[code]
Copyright (c) 1993-1999 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name>  <port number>/<protocol>  [aliases...]   [#<comment>]
echo                7/tcp
echo                7/udp
discard             9/tcp    sink null
discard             9/udp    sink null
systat             11/tcp    users                  #Active users
systat             11/tcp    users                  #Active users
daytime            13/tcp
daytime            13/udp
qotd               17/tcp    quote                  #Quote of the day
qotd               17/udp    quote                  #Quote of the day
chargen            19/tcp    ttytst source          #Character generator
chargen            19/udp    ttytst source          #Character generator
ftp-data           20/tcp                           #FTP, data
ftp                21/tcp                           #FTP. control
telnet             23/tcp
smtp               25/tcp    mail                   #Simple Mail Transfer Protocol
time               37/tcp    timserver
time               37/udp    timserver
rlp                39/udp    resource               #Resource Location Protocol
nameserver         42/tcp    name                   #Host Name Server
nameserver         42/udp    name                   #Host Name Server
nicname            43/tcp    whois
domain             53/tcp                           #Domain Name Server
domain             53/udp                           #Domain Name Server
bootps             67/udp    dhcps                  #Bootstrap Protocol Server
bootpc             68/udp    dhcpc                  #Bootstrap Protocol Client
tftp               69/udp                           #Trivial File Transfer
gopher             70/tcp
finger             79/tcp
http               80/tcp    www www-http           #World Wide Web
kerberos           88/tcp    krb5 kerberos-sec      #Kerberos
kerberos           88/udp    krb5 kerberos-sec      #Kerberos
hostname          101/tcp    hostnames              #NIC Host Name Server
iso-tsap          102/tcp                           #ISO-TSAP Class 0
rtelnet           107/tcp                           #Remote Telnet Service
pop2              109/tcp    postoffice             #Post Office Protocol - Version 2
pop3              110/tcp                           #Post Office Protocol - Version 3
sunrpc            111/tcp    rpcbind portmap        #SUN Remote Procedure Call
sunrpc            111/udp    rpcbind portmap        #SUN Remote Procedure Call
auth              113/tcp    ident tap              #Identification Protocol
uucp-path         117/tcp
nntp              119/tcp    usenet                 #Network News Transfer Protocol
ntp               123/udp                           #Network Time Protocol
epmap             135/tcp    loc-srv                #DCE endpoint resolution
epmap             135/udp    loc-srv                #DCE endpoint resolution
netbios-ns        137/tcp    nbname                 #NETBIOS Name Service
netbios-ns        137/udp    nbname                 #NETBIOS Name Service
netbios-dgm       138/udp    nbdatagram             #NETBIOS Datagram Service
netbios-ssn       139/tcp    nbsession              #NETBIOS Session Service
imap              143/tcp    imap4                  #Internet Message Access Protocol
pcmail-srv        158/tcp                           #PCMail Server
snmp              161/udp                           #SNMP
snmptrap          162/udp    snmp-trap              #SNMP trap
print-srv         170/tcp                           #Network PostScript
bgp               179/tcp                           #Border Gateway Protocol
irc               194/tcp                           #Internet Relay Chat Protocol       
ipx               213/udp                           #IPX over IP
ldap              389/tcp                           #Lightweight Directory Access Protocol
https             443/tcp    MCom
https             443/udp    MCom
microsoft-ds      445/tcp
microsoft-ds      445/udp
kpasswd           464/tcp                           # Kerberos (v5)
kpasswd           464/udp                           # Kerberos (v5)
isakmp            500/udp    ike                    #Internet Key Exchange
exec              512/tcp                           #Remote Process Execution
biff              512/udp    comsat
login             513/tcp                           #Remote Login
who               513/udp    whod
cmd               514/tcp    shell
syslog            514/udp
printer           515/tcp    spooler
talk              517/udp
ntalk             518/udp
efs               520/tcp                           #Extended File Name Server
router            520/udp    route routed
timed             525/udp    timeserver
tempo             526/tcp    newdate
courier           530/tcp    rpc
conference        531/tcp    chat
netnews           532/tcp    readnews
netwall           533/udp                           #For emergency broadcasts
uucp              540/tcp    uucpd
klogin            543/tcp                           #Kerberos login
kshell            544/tcp    krcmd                  #Kerberos remote shell
new-rwho          550/udp    new-who
remotefs          556/tcp    rfs rfs_server
rmonitor          560/udp    rmonitord
monitor           561/udp
ldaps             636/tcp    sldap                  #LDAP over TLS/SSL
doom              666/tcp                           #Doom Id Software
doom              666/udp                           #Doom Id Software
kerberos-adm      749/tcp                           #Kerberos administration
kerberos-adm      749/udp                           #Kerberos administration
kerberos-iv       750/udp                           #Kerberos version IV
kpop             1109/tcp                           #Kerberos POP
phone            1167/udp                           #Conference calling
ms-sql-s         1433/tcp                           #Microsoft-SQL-Server
ms-sql-s         1433/udp                           #Microsoft-SQL-Server
ms-sql-m         1434/tcp                           #Microsoft-SQL-Monitor
ms-sql-m         1434/udp                           #Microsoft-SQL-Monitor               
wins             1512/tcp                           #Microsoft Windows Internet Name Service
wins             1512/udp                           #Microsoft Windows Internet Name Service
ingreslock       1524/tcp    ingres
l2tp             1701/udp                           #Layer Two Tunneling Protocol
pptp             1723/tcp                           #Point-to-point tunnelling protocol
radius           1812/udp                           #RADIUS authentication protocol
radacct          1813/udp                           #RADIUS accounting protocol
nfsd             2049/udp    nfs                    #NFS server
knetd            2053/tcp                           #Kerberos de-multiplexor
man              9535/tcp                           #Remote Man Server
#sapdp01  3201/tcp
#sapmsBC1      3602/tcp
#sapmsBC2        3600/tcp
#sapmsBC3      3600/tcp
#sapmsCR1         3671/tcp
#sapmsCR2         3672/tcp
#sapmsCR3         3673/tcp
#sapmsCR4         3671/tcp
sapmsNSP      3600/tcp
sql6           7210/tcp
sapdbni72          7269/tcp
sql30           7200/tcp # SAP DB
vmake           7792/tcp # SAP DB
sapdp00 3200/tcp
sapgw00     3300/tcp[/code]

Similar Messages

  • Dispatch error in web ui

    Hi,
    I am not able to open the Account web ui link after upgrading to CRM 7 version.Some dispatch error is throwing
    as shown below.
    "XXX has encountered a page dispatching error. Please try again. If this problem persists, please contact the Support Desk with the problem description and steps necessary to reproduce it."
    Can any one plz help me to resolve this.
    Regards,
    Pooja
    Edited by: Abhijeet Singh on Jun 8, 2010 3:39 PM

    Hi Prafulla,
    This is a common error when the space available for the shared memory area is not high enough (you'll need to increase parameter abap/shared_objects_size_MB in RZ11). You should get in touch with your basis guys and apply recommendation from the following OSS note:
    1281896 - High Memory Consumption and CRM Webclient
    Also depending on when this dump occurs (for example when using multilevel categorization) you might want to check if some OSS notes are relevant for your system, like this one for example:
    1773567 - Multilevel Categorization: Out of Memory Exception
    Best regards,
    Nicolas.

  • How to solve issue Dispatching Error in sap webdispatcher ?

    Dear Sir,
    We already implement https using IGS system and when we do access from this link https://:86xx/sap/bw/bex we encounter message error like this,
    500 Dispatching Error
    Dispatching Error
    Error: -26
    Version: 6040
    Component: HTTP_ROUTE
    Date/Time: Tue Jan 23 14:07:17 2007 
    Module: http_route_mt.c
    Line: 2971
    Server: hostname.
    Detail: no valid destination server available for '!ALL' rc=13
    © 2001-2005, SAP AG
    Please there's any want can help me to solve this issue?
    Thanks and Best Regards,
    Chrisna

    Hi,
    The error "Detail: no valid destination server available for '!ALL' rc=13" usually means that the ABAP message server is unreachable from the webdisp. Can you please verify the connection details for the webdisp with the following command:-
    sapwebdisp.exe pf=sapwebdisp.pfl -checkconfig
    If the output is without errors (warnings are ok for the mean time) then goto SICF on the backend server and verify that the following services are available in SICF:-
    /sap/public/icf_info/icr_groups  
    /sap/public/icf_info/icr_urlprefix
    /sap/public/icf_info/logon_groups
    /sap/public/icf_info/urlprefix   
    If the output is with errors then you need to verify that the message server information in the sapwebdisp.pfl profile is correct. Please goto SMMS -> Goto -> Parameters -> Display on backend server and verify the following parameters:-
    FQDN of message server
    ms/http_port
    You will need to enter this information into the sapwebdisp.pfl and restart the webdisp.
    P.S. If none of these steps help can you please provide the output of sapwebdisp.exe pf=sapwebdisp.pfl -checkconfig and some errors in the dev_webdisp
    Michael

  • I uploaded the upgrade to Photoshop Elements 12 today.  I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements!  I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about)

    I uploaded the upgrade to Photoshop Elements 12 today.  I got a "dispatching error" for Photoshop Elements, but was able to download Premier elements!  I did not order Premier Elements, so I'm confused (unless this was a package that I did not know about).  I really want the Photoshop Elements upgrade - not Premier Elements.  I do hope I did not pay for both - I only want one.  Help!

    Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12.  Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10?  If so what specific error are you receiving?

  • I get a "500 Dispatching Error" on my adobe account orders page

    When i try to download my Adobe Creative Cloud invoices from my account, i get an 500 Dispatching Error and i can't download my invoices:
    500 Dispatching Error
    Error:    -26
    Version:    7001
    Component:    HTTP_ROUTE
    Date/Time:    Sat Jan 17 09:57:41 2015
    Module:    http_route_mt.c
    Line:    3139
    Server:    du1pam003_WEB_21
    Error Tag:    {001c5525}
    Detail: no valid destination server available for '!ALL' rc=4
    Any Idea?

    I have one link about invoices Print a payment receipt or invoice | Creative Cloud
    Otherwise, you'll need to contact Adobe (this is an open forum, not Adobe support) Contact Customer Care

  • 500 dispatching error?

    Hello. I just bought the plan for photographers and received the confirmation email by adobe saying that the payment has been processed. However, when I open creative cloud, photoshop and lightroom don't have the option "install" but only "try" as if I didn't make any payment.  When I look at "my orders" into my adobe account, the invoice says "500 dispatching error". What is going on? I don't even know if the payment has been done for real or not since I used a credit card and it usually takes some time to report money transfers.

    Moving this discussion to the Adobe Creative Cloud forum.
    Lucanicolini if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

  • Modidy the Web Dispatcher Error message

    Hi,
    Where do we modify the web dispatcher error message "500 Dispatching error" to a cutome message on the J2EE?
    Thank you.

    note says:
    Customization of 500 Internal Server Error
    This response code is returned when there is a problem with the application or the server. Any not handled Exception or Error triggers the return of response with code 500.
    To return different content on error occurance, you need to handle the error by inserting the appropriate declaration in web.xml.
    Sample declaration for handling of test.MyApplicationException occurances in the application scope:
      <error-page>
        <exception-type>test.MyApplicationException< /exception-type>
        <location>/customerrors/MyApplicationException.jsp</location>
      </error-page>
               Note1: For each error condition you need to handle (application exception use a separate error page. For all other exceptions use a global error handling definition for java.lang.Throwable.
    However you must be aware of the following:
    In case java.lang.OutOfMemoryError appears the subsequent behaviour of the JVM is undefined and this may lead to unpredicatable effects. Therefore the webcontainer will not pass such error to the error page for handling.
    If the following general definition
      <error-page>
        <exception-type>java.lang.Throwable< /exception-type>
        <location>/customerrors/WhateverProblem.jsp</location>
      </error-page>
    is in place, then the error handler resource is responsible for logging the error condition.
    This means the resource handling general problems if such is declared must be dynamic (a JSP page or a servlet not HTML page)
               Note2: Exceptions are searched in order of appearance in web. xml and not determining closest in class hierarchy.
               This is true for all patchlevels of J2EE Engine 6.20 and versions of J2EE Engine 6.40 lower than SP11.
    Therefore if test.ChildException extends test.ParentException extends java.lang.Exception and
    <error-page>
       <exception-type>test.ParentException</exception-type>
      <location>/customerrors/ParentException.jsp</location>
    </error-page>
    <error-page>
      <exception-type>test.ChildException</exception-type>
      <location>/customerrors/ChildException.jsp</location>
    </error-page>
    is specified in the web.xml of the application as exceptions are searched in order of appearance regardless if ChildException or ParentException is thrown, the call will be directed to /Customerrors/ParentException.jsp because ChildException is a subclass of ParentException..
    Working mapping would be :
    <error-page>
      <exception-type>test.ChildException</exception-type>
      <location>/customerrors/ChildException.jsp</location>
    </error-page>
    <error-page>
      <exception-type>test.ParentException</exception-type>
      <location>/customerrors/ParentException.jsp</location>
    </error-page>
    so you need to switch the declarations in the web.xml (effective on next start of the application).
    BR, Oliver

  • XSengine 500 dispatch error

    SPS 80
    suse linux enterprise server 11 sp 2
    was working fine.. all the sudden today it is throwing an error..
    trace file
    [Thr 140359035451136] *** ERROR => no valid destination server available for '!ALL' rc=7 {00000003} [http_route.c 3448]
    [Thr 140359034922752] *** ERROR => no valid destination server available for '!J2EE' rc=7 {00000004} [http_route.c 3448]
    500 Dispatching Error
    Error is logged with Tag: {00020132}
    Tue Dec 23 19:04:41 2014
    help
    tthanks

    Dear Zachary,
    It is not clear whether this trace file belong to ICM or web dispatcher. This error means basically that the HTTP request could not be forwarded to the proper service, either because it does not exist or because it was down at the time.
    The most important thing to look at is the URI prefix in order to pinpoint the related service. Usually all requests starting with "<hostname>:<port>/sap/..." will be handled by ABAP side and everything different will be handled by J2EE.
    As one example, in the web dispatcher profile, those settings will be defined as optional setings for parameter "WDISP/SYSTEM_<xx>" under "SRCURL" option. There you will specify which URI prefixes will be forwareded to which backend systems.
    In sumarry you must ensure that there is a matching rule to your URL request.
    Cheers,
    Ian Segóbio.

  • [질문]MTS 와 Dispatcher 관련 Error 메시지

    안녕하세요 ^^ alert log 에 관해서 질문 하나 올립니다 ~
    우선 alert log 에 아래와 같은 에러 메시지가 떨어졌습니다.
    Errors in file /oracle/app/oracle/admin/HLC2/udump/hlc2_ora_5670.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-02067: transaction or savepoint rollback required
    ORA-02055: distributed update operation failed; rollback required
    ORA-02074: cannot ROLLBACK in a distributed transaction
    ORA-06512: at "HDTSN.SP_RF_STAV_MAIN", line 212
    ORA-02064: distributed operation not supported
    우선 OS는 Sun sparc 5.8 이구요~
    오라클은 8.1.6.3 입니다....
    제가 찾아본 결과 MTS 와 DISPATCHER 가 데이터베이스 링크을 하는 도중
    타이밍 아웃이 발생하면서 생기는 오류 라고 합니다. 그래서 INIT 파일에서 MTS 에 관한 값을 false 로 설정하면 된다고 나오는데...
    그래서 이와 관련된 parameter 값을 확인해보니
    mts_servers=0
    mts_max_servers=20
    mts_max_dispatchers=5
    mts_dispatchers=null 이렇게 값들이 설정이 되있더라구요...
    우선 제가 오류 분석을 제대로 했는지는 모르겠지만...제가 한 분석대로 해석을
    한다면 mts_dispatcher 값이 주어지지 않았는데...어떻게 저런 error 메시지가
    떨어지는 건지 궁금합니다...
    그리고 제가 오류 판단을 잘못했다면 어떠한 과정을 통해서 저런 error 메시지가
    떨어졌는지도 궁금합니다...^^;
    글 수정:
    키노미르

    죄송하지만.. 어디에서 어디로 링크를 걸은 것인지요?
    SUN < -> windows (ODBC) 인지요?
    찾으신 "Disable MTS"라는 것은..
    윈도우즈의 ODBC설정에서
    Disable distributed Microsoft Transaction Server 을 선택하라는
    것입니다.
    이에 대한 것은
    metalink note 163986.1 Unable to Use SET SAVEPOINT While Using ODBC Application
    이구요..
    만약 유닉스 장비라면..
    remote로 프로시저를 수행하려고 하지 않으셨는지요?
    9i이상에서만 에러없이 진행된다고 아는데요.
    그리고 8.1.6버젼은 no certification이니 업그레이드 테스트해서
    어플리케이션들이 정상동작하는지 확인후, 9i 이상으로 업그레이드
    하는 것이 좋을 것 같습니다.

  • Web dispatcher "Error : PSE file ,unable to use! "

    Hello,
    I has a SAP Netweaver kernel 7.01 with oracle database.
    I tried to config web dispatcher to support ssl by following the link below.
    [http://help.sap.com/saphelp_nw04s/helpdata/en/39/09a63d7af20450e10000000a114084/content.htm]
    I has done all step successfully.
    But when I started web dispatcher I got these error in the log file.
    [Thr 8688]   profile param "ssl/server_pse" = "E:\webdispatcher\sec\SAPSSL.pse"
               resulting Filename = "E:\webdispatcher\sec\SAPSSL.pse"
    [Thr 8688] *** ERROR =>   secudessl_Create_SSL_CTX():  PSE "E:\webdispatcher\sec\SAPSSL.pse": unable to use! [ssslsecu.c   1735]
    [Thr 8688] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
      secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
    [Thr 8688] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
    [Thr 8688] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
    ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
    ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
    ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
    ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "E:\webdispatcher\sec\SAPSSL.pse"
    [Thr 8688] << ---------- End of Secude-SSL Errorstack ----------
    [Thr 8688] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
            for "E:\webdispatcher\sec\SAPSSL.pse" [ssslxxi.c    2324]
    [Thr 8688] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 8688] =================================================
    I search the forum but didn't see "file pse unable to use!" issue.
    Is this about wrong certificate when import cer to PSE file or something else?
    Any help will be appriciate.
    Thank you
    Chai

    Hi,
    I am facing same issue.
    Please revet, if you resolved the same.
    pasting log here.
    Response will be appreciated.
    trc file: "dev_webdisp", trc level: 1, release: "720"
    sysno 00
    sid WD1
    systemid 390 (AMD/Intel x86_64 with Linux)
    relno 7200
    patchlevel 0
    patchno 68
    intno 20020600
    make multithreaded, ASCII, 64 bit, optimized
    profile /usr/sap/WD1/SYS/profile/WD1_W00_sapportal
    pid 4382
    [Thr 140272010733408] Fri Nov 1 11:41:50 2013
    [Thr 140272010733408] started security log to file ./dev_icm_sec
    [Thr 140272010733408] SigISetDefaultAction : default handling for signal SIGCHLD
    [Thr 140272010733408] SAP Web Dispatcher running on: sapportal.abrajoman.com
    [Thr 140272010733408] MtxInit: 30001 0 2
    [Thr 140272010733408] ***LOG IM1=> IcmInit, Startup (SAP Web Dispatcher&sapportal.abrajoman.com&4382&) [icxxrout_mt. 1914]
    [Thr 140272010733408] IcmInit: listening to admin port: 65000
    [Thr 140272010733408] MPI: dynamic quotas disabled.
    [Thr 140272010733408] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    [Thr 140272010733408] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 140272010733408] CCMS: Initalized shared memory of size 40000000 for monitoring segment.
    [Thr 140272010733408] CCMS: Checking Downtime Configuration of Monitoring Segment.
    [Thr 140272010733408] IcrCoreInitSessionTable: Session table initialized
    [Thr 140271863756544] HttpExtractArchive: files from archive /usr/sap/WD1/SYS/exe/run/wdispadmin.SAR in directory /usr/sap/WD1/W00/data/icmandir are up to date
    [Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpAdminHandler(0x7f9390000e70), slot=0, flags=36869) for /sap/admin, active: 1, table 0x7f9390000a10
    [Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpModHandler(0x7f93900012e0), slot=1, flags=12293) for /, active: 1, table 0x7f9390000a10
    [Thr 140271863756544] CsiInit(): Initializing the Content Scan Interface
    [Thr 140271863756544] AMD/Intel x86_64 with Linux (mt,ascii,SAP_CHAR/size_t/void* = 8/64/64)
    [Thr 140271863756544] CsiInit(): CSA_LIB = "/usr/sap/WD1/SYS/exe/run/libsapcsa.so"
    [Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpAuthHandler(0x7f9390001440), slot=2, flags=12293) for /, active: 1, table 0x7f9390000a10
    [Thr 140271863756544] HttpISubHandlerAdd: Added handler HttpWebDispHandler(0x7f9390008340), slot=3, flags=1060869) for /, active: 1, table 0x7f9390000a10
    [Thr 140271863756544] Started service PORT=8100,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
    [Thr 140271863756544] =================================================
    [Thr 140271863756544] = SSL Initialization platform tag=(linuxx86_64_gcc41)
    [Thr 140271863756544] = (720_REL,Oct 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
    [Thr 140271863756544] profile param "ssl/ssl_lib" = "/usr/sap/WD1/exe/libsapcrypto.so"
    [Thr 140271863756544] resulting Filename = "/usr/sap/WD1/exe/libsapcrypto.so"
    [Thr 140271863756544] = found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,AESNI,NB
    [Thr 140271863756544] = current UserID: "wd1adm", env-var USER="wd1adm"
    [Thr 140271863756544] = using SECUDIR=/usr/sap/WD1/W00/sec
    [Thr 140271863756544] profile param "ssl/server_pse" = "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] resulting Filename = "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] *** ERROR => secudessl_Create_SSL_CTX(): PSE "/usr/sap/WD1/W00/sec/epssl.pse": unable to use! [ssslsecu_mt. 1735]
    [Thr 140271863756544] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
    [Thr 140271863756544] secude_error 1824 (0x00000720) = "Wrong or Missing PIN for PSE"
    [Thr 140271863756544] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
    [Thr 140271863756544] ERROR in SSL_CTX_set_default_pse_by_name: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] ERROR in ssl_set_pse: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] ERROR in af_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] ERROR in secsw_open: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] ERROR in sec_parse_PSEInfo_cont: (1824/0x0720) Wrong or Missing PIN for PSE : "/usr/sap/WD1/W00/sec/epssl.pse"
    [Thr 140271863756544] << ---------- End of Secude-SSL Errorstack ----------
    [Thr 140271863756544] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
    for "/usr/sap/WD1/W00/sec/epssl.pse" [ssslxxi_mt.c 2324]
    [Thr 140271863756544] *** ERROR => Initialization of SSL library failed -- NO SSL available!
    [Thr 140271863756544] =================================================
    [Thr 140271863756544]
    [Thr 140271863756544] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
    [Thr 140271863756544] *** ERROR => IcmServInitSSL: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv_mt. 251]
    [Thr 140271863756544] *** WARNING => Could not start service (rc=-14) PORT=8300,PROT=HTTPS,TIMEOUT=60,PROCTIMEOUT=900,VCLIENT=0 [icxxserv_mt. 651]
    [Thr 140272010733408] SigISetDefaultAction : default handling for signal SIGCHLD
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 0
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 1
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 2
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 3
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 4
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 5
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 6
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 7
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 8
    [Thr 140272010733408] IcmCreateWorkerThreads: created worker thread 9
    [Thr 140271863756544] IcmWatchDogThread: watchdog started
    [Thr 140271847081728] Fri Nov 1 11:42:57 2013
    [Thr 140271847081728] *** ERROR => NULL bytes in HTTP request {0005000c} [http_plgrt_mt.c 6025]
    [Thr 140271847081728] CONNECTION (id=5/12):
    used: 1, type: default, role: Server(1), stateful: 0
    NI_HDL: 59, protocol: HTTP(1)
    local host: 192.168.22.2:8100 ()
    remote host: 192.168.2.8:56650 ()
    status: READ_REQUEST
    connect time: 01.11.2013 11:42:57
    MPI request: <c> MPI response: <d>
    request_buf_size: 65464 response_buf_size: 0
    request_buf_used: 122 response_buf_used: 0
    request_buf_offset: 0 response_buf_offset: 0
    [Thr 140271847081728] Address Offset REQUEST:
    [Thr 140271847081728] ------------------------------------------------------------------------
    [Thr 140271847081728] 0x7f9399f8d068 000000 16030100 75010000 71030152 73499529 |....u...q..RsI.)|
    [Thr 140271847081728] 0x7f9399f8d078 000016 9f988ed3 cb861e2f 7260cac7 978a9a30 |......./r`.....0|
    [Thr 140271847081728] 0x7f9399f8d088 000032 b74f3103 f3feea03 2b336a00 0018002f |.O1.....+3j..../|
    [Thr 140271847081728] 0x7f9399f8d098 000048 00350005 000ac013 c014c009 c00a0032 |.5.............2|
    [Thr 140271847081728] 0x7f9399f8d0a8 000064 00380013 00040100 0030ff01 00010000 |.8.......0......|
    [Thr 140271847081728] 0x7f9399f8d0b8 000080 00000e00 0c000009 73617070 6f727461 |........sapporta|
    [Thr 140271847081728] 0x7f9399f8d0c8 000096 6c000500 05010000 0000000a 00060004 |l...............|
    [Thr 140271847081728] 0x7f9399f8d0d8 000112 00170018 000b0002 0100 |.......... |
    [Thr 140271847081728] ------------------------------------------------------------------------
    [Thr 140271847081728] *** ERROR => HttpPlugInHandleNetData: HttpParseRequestHeader failed (rc=701) [http_plgrt_m 2250]
    Trace File
       (7784bytes)
    Line: Filter:
    Thanks,
    Kundan

  • Web Dispatcher error pages internationalization

    Hello,
    I need to show web dispatcher custom error pages in the language of the user making the request. I can get the translated text I just need to know how to dynamically include these translated pages in the custom error pages.
    Web dispatcher is configured for custom error pages and works correctly. Now we're looking to see how to include translated pages in the user's language. Is there a way to get the language from the browser headers that are sent?
    Thanks,
    John

    Hi John,
    You can use javascript to determine the language set on the browser of the user and redirect to a translated page based on the language.
    Here is a simple sample code of how to get the language from the browser:
    http://www.java2s.com/Code/JavaScript/Javascript-Objects/GetbrowserLanguage.htm
    You then can redirect using javascript to the page you want based on it.
    Hope it helps,
    Roy
    Edited by: Roy Cohen on Nov 19, 2009 6:46 PM

  • Provisioning Dispatcher error: Clear ALL old Semas

    So I've gotten this periodically in the past, but recently we've been getting randomly spammed by this error message in our System Log:
    "Clear ALL old Semas:  Exception:java.lang.NullPointerException"
    It has no additional details, Job ID of 0, and seems to be coming from our second provisioning dispatcher, but I'm not 100% positive they haven't both done it at some point. Is this related to having two Provisioning dispatchers running on the same machine? That's my only guess, as I've heard people mention that being a problem in the past, but never exactly WHY it is a problem.
    Alternatively, is there a way I can find out what code it is actually running so I can fix the exception handling or maybe add a check or two to avoid trying to use a null object (in the end, I'd probably consider this a code fault regardless of what's causing it).
    Thanks!

    I thought the problem might be related to incorrect configuration of our dispatchers (we had two provisioning dispatchers and two regular dispatchers running on the same machine apparently), so I fixed the configuration of those and thought the problem went away.
    This morning, it has come back. It started with exactly one of this message:
    Clear ALL old Semas:  Exception:com.microsoft.sqlserver.jdbc.SQLServerException: The native type 4 is unknown.
    Then over the next two hours we got this message in our log over 1600 times:
    Clear ALL old Semas:  Exception:java.lang.ArrayIndexOutOfBoundsException: 3
    Does anyone else have any thoughts!? This problem is plaguing us right now... I'm not actually sure what it is doing that is bad, but it's filling up our log with junk and we're trying to measure how well our system is working using error counts, which this shoots through the roof.

  • Dispatch error in CM29

    Hi Guys
    I need your help at the earliest pleaese:
    I am trying to dispatch order (planned order or process order) in CM29 with only one order and full capacity available. But on dispatch it throws an error: C7056 : Capacity not available
    In planned order I checked the detailed schd tab has capacity much less than the available capacity!
    Can you guys please help me at the earliest, as I am in midst of the UAT!
    -Rahul

    I haven't had the chance to work with that scenario so can't speak from exp. & do not want to speculate either.
    But looking at the feature I guess it should be quite clear what it is provided for isn't it? Maybe if you study the capacities used at your end it should be fairly clear whether it would make sense to work with that scenario.
    Sorry wasn't of much help.

  • Request Dispatcher error when forwarding

    hi all,
    I am using tomcat 4.1.24 and jdk1.3.1. I am having one servlet and one jsp. Servlet handles the submitted form and then for presentation logic it sends request to jsp page. I have servlet mapping properly defined in the web.xml and servlet url is /servlet/UploadImage. In this servlet I have used Requestdispatcher for forwarding the request to the jsp page the jsp page url is /jsp/ScanMessage.jsp. But while request is getting forwarded its throwing the exception as follows. I have not written any statement called out.println() in the servlet, even I am not geting object of PrintStream or Writer.
    Please Help me.
    Regards
    vivek
    The exception is
    2003-09-16 10:32:50 ApplicationDispatcher[] Servlet.service() for servlet jsp threw exception
    org.apache.jasper.JasperException: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:254)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
    at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
    at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
    at UploadImage.processRequest(UploadImage.java:91)
    at UploadImage.doPost(UploadImage.java:105)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:466)
    at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:585)
    at java.lang.Thread.run(Thread.java:479)
    ----- Root Cause -----
    javax.servlet.ServletException: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
    at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:536)
    at org.apache.jsp.ScanMessage_jsp._jspService(ScanMessage_jsp.java:506)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:684)
    at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:432)
    at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:356)
    at UploadImage.processRequest(UploadImage.java:91)
    at UploadImage.doPost(UploadImage.java:105)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:466)
    at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:585)
    at java.lang.Thread.run(Thread.java:479)

    * Servlet.java
    * Created on August 28, 2003, 11:09 AM
    import javax.servlet.*;
    import javax.servlet.http.*;
    import post.util.PropertyFile;
    import post.beans.ImageFiles;
    import java.io.File;
    import java.io.IOException;
    import com.oreilly.servlet.*;
    * @author vivek
    * @version
    public class UploadImage extends HttpServlet
    /** Initializes the servlet.
    public void init(ServletConfig config) throws ServletException
    super.init(config);
    /** Destroys the servlet.
    public void destroy()
    /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
    * @param request servlet request
    * @param response servlet response
    protected void processRequest(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, java.io.IOException
    try
    HttpSession session = request.getSession();
    String userId = (String)session.getAttribute("LoginID");
    String sessionId = (String)session.getId();
    String rootPath = PropertyFile.getProperty("RootDirectoryPath");
    String uploadDirectoryPath = PropertyFile.getProperty("MailUploadDirectory");
    String path = rootPath + "/" + uploadDirectoryPath + "/" + userId + "/" + sessionId + "/";
    File filePath = new File(path);
    RequestDispatcher dispatcher = getServletContext().getRequestDispatcher("/jsp/ScanMessage.jsp");
    if(!filePath.exists())
    filePath.mkdirs();
    MultipartRequest fileRequest=null;
    try
    System.out.println("Brfore file saving");
    fileRequest = new MultipartRequest(request,path.trim(),2*1024*1024);
    System.out.println("Brfore file saving");
    catch(IOException ioe)
    request.setAttribute("ReturnedValue","MaximumSizeReached");
    dispatcher.forward(request,response);
    java.util.Enumeration uploadedFiles = fileRequest.getFileNames();
    String file = fileRequest.getFilesystemName((String) uploadedFiles.nextElement());
    System.out.println(file);
    if(file != null)
    ImageFiles files = (ImageFiles)session.getAttribute("UploadedImages");
    if(files == null)
    files = new ImageFiles();
    files.setFilePath(path);
    files.add(file);
    if(session.getAttribute("UploadedImages") == null)
    session.setAttribute("UploadedImages",files);
    System.out.println("added UploadedImages to session");
    request.setAttribute("ReturnedValue","Done");
    dispatcher.forward(request,response); //here the exception is thrown
    catch(Exception e)
    e.printStackTrace();
    /** Handles the HTTP <code>POST</code> method.
    * @param request servlet request
    * @param response servlet response
    protected void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, java.io.IOException {
    processRequest(request, response);
    /** Returns a short description of the servlet.
    public String getServletInfo() {
    return "Short description";

  • RSEOUT00 - ECC 6.0 IDOC Dispatch Error.  Status 30 goes to status 02

    After our Unicode conversion to ECC 6.0, we started to get some IDOC processing going from status 30 to 02 and not dispatching to our EDI provider.  We noticed it is on the PO Long Text or any of the Text fields for that matter where somebody has Cut/Paste Text from Word/Excel/Outlook document and they are using colors/fonts/bold, etc.  We've also noticed it on our MAKT table on the description.  You click on the Text and can see it outlines extra characters beyond the end of the visible text.  When RSEOUT00 gets a hold of these PO's, it won't dispatch them.  If we go back and erase the text and type it all in by had and save and close our PO Version change, it dispatches, pulls and loads now to our EDI provider.  Looking for some setting that allows us to maybe turn this feature off?  maybe it has to do with CodePage defaults, etc.  I saw once were you could tell SAP to save documents in Office 2007/2010 version instead of Office 2003 but don't remember which OSS note that was.

    Try to use "Line Editor' or 'Sapscript Editor' instead of  "Continous Text Editor". You will find these editor options below to the text fields in text maintenace tabs. Hope this helps.
    Regards,
    Gokul

Maybe you are looking for