Dispatcher for IDES EHP7 does not running

Companios of the SAP community, I'm trying to install an IDES EHP7 in Red Hat but the dispatcher stays in "Yellow".
The dispatcher log just stays on continuosly repeating what the images attached to them.
Someone has happened to you or i might suggest that i do.
Best regards.

Hi folks,
i solved it by myself. There was a wrong javaparameter in the settings of the dispatcher.
-Xgcpolicy.gencon instead of -Xgcpolicy:gencon, my colleague has found it out.
Regards Peter

Similar Messages

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
    The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
    In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

  • REPORT DOES NOT RUN CORRECTLY , URGENT PLEASE HELP

    Hi,
    I am trying to run a report from visul basic screen, but it does not run correctly. Here is how I am running the report. There is a screen developed in VB This screen prompts the user for user id and password. Once it gets that, it connects to the oracle database and pulls out a column from a table. And passes that value as a parameter to the report. Now I am calling the the report for each individual value . There are 21 value being pulled out of the database and it invokes the report 21 times. So there are 21 report engines gets started. Is there a better way to do that ? Secondly when I pass the parameter , some parameters does not pass correctly I guess , because its not generating any out put . Like out of 21 may be 10 or 11 reports gets generated correctly but rest of the reports are blank. I debug the screen i saw that the parameter value is correct, everything seems good. But still the reports are comming blank. Any Idea why it is so ? The command line that i am using in VB screen is
    Shell "C:\progra~1\ora95_2\bin\rwrun60.exe P:\Business_Analysis_&_Reporting_Tool\Test_REPORT_Templates\STORE_TYPES\Baby_Distribution_Report.Rdf USERID=" & UID & "/" & PWD & "@cposp201 DESFORMAT=PDF DESTYPE=FILE DESNAME=" & txtPath.Text & Replace(strName, " ", "_") & ".PDF BRND='" & adoRecBrand!Brand & "' PRINTJOB=NO PARAMFORM=NO"
    In the above command " adoRecBrand!Brand " is the parameter thats being passed. This is actually a recordset and brand is the column in it. When I debug the screen , I see the value also there. But the report comes out blank. Please help. This is urgent.
    Thanks
    Feroz

    The way you call reports is not scalable. If you have 100 records come back from database, you would end up launch 100 engines at the same times, which probably will blow up your machine. You should use oracle reports server to do that. You can either use rwcli60 to submit the job to reports server, or invoke rwcgi60 from URL.
    I am afraid some of reports engine failed to start and you get nothing back in your case.
    After switch to use reports server achitecture, if you still see some report is blank in your application, then you can run that report with that special set of parameters manually and see if any problem with the report itself.
    Hope this helps.
    Thanks,
    -Shaun

  • The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

    I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
    The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
    Here is code that illustrates what I am doing:
    DECLARE @MDX varchar(max);
    SET @MDX='
    SELECT
    [Measures].[Extended Service Count]
    } ON COLUMNS,
    NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
    ON ROWS
    FROM (
    SELECT
    {[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
    FROM [MyCube]
    /* Test 1 */
    EXECUTE(@MDX) at SSASLinkedServer;
    /* Test 2 */
    DECLARE @ResultsB TABLE (
    Manufacturer varchar(255)
    , ExtendedServiceCount float
    INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
    Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
    Other articles I've found so far don't seem to apply to my case.  I am not creating any explicit transactions in my code.   When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
    Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
    Any ideas?
    -Tab Alleman

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • AutoPlay does not run when inserting disk

    System: dv7-1285dx
    Vista Home Premium 64 bit SP1
    When inserting a disk into the dvd drive AutoPlay does not run.
    The information on the disk can be accessed through windows explorer by right clicking on the drive letter and choosing
    open.  The contents of the disk are displayed and can be accessed but windows does not recognise whether the disk
    is video or data.
    AutoPlay does not run from Windows Explorer.
    In control panel > autoplay the "Use AutoPlay for all media and devices" is checked, all media have options other than
    "take no action".
    The driver for the DVD player has been unistalled and reinstalled with no effect.
    Disks burned with the drive behave normally on other computers.
    AutoPlay runs properly for any device plugged into a USB port.
    Any ideas of what to try next?
    Thanks
    Bo

    Hi,
    Please check the following steps:
       http://windows.microsoft.com/en-AU/windows-vista/T​roubleshoot-AutoPlay-problems
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Simulation does not run at all

    I have made up some diodes using the component wizard, such that the diode acts like a perfect switch at 0.7 volts.  For some reason SPICE simulation does not run.   If I include one of these diodes in other circuits, the circuit will not simulate.  So the diode model is the problem.   Any ideas how to get it working?  Attached is the multisim file
    Thanks in advance!
    Solved!
    Go to Solution.
    Attachments:
    perfectbridge.ms13 ‏62 KB

    "------ Checking SPICE netlist for perfectbridge - Thursday, February 05, 2015, 11:51:34 AM ------
    ======= SPICE Netlist check completed, 0 error(s), 0 warning(s) =======
    Model 'diodeperfect__perfectdiodes__1': Parameter 'IS' must be greater than zero
    doAnalyses: Incorrect use of model parameters
    Simulation canceled"
    So:  Right click on one of the diodes, select "Properties" - "Value" Tab - Press "Edit model" button - Check "Use default" box for "IS" - Press "Change all 4 components" button - Press "OK".

  • Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

    Hi
    We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
    We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
    To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
    The strange thing is that:
    - It works for all other logfiles
    - If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
    Any ideas?
    Best regards
    Tom Bo

    Hi,
    Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
    In special the changes after patch collection 2007/5.
    Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
    hope this helps..
    Regards
    Rolf

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

    premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."   Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

    Jurgen Freund
    Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
    I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
    How to fix the ERROR 126 when you open OpenGL programs - YouTube
    The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
    LoadLibrary failed with error 126: cant find the required
    Please let us know if that worked for you.
    Thank you.
    ATR
    Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

  • Number range  for object MDTB does not exist - Message no. 61501

    Hi All ,
      I have done the necessary configurations in PP say
    Order Type
    Order Type Dependent Parameters
    Scheduling parameters for planned & production order
    Confirmation parameters
    Availabilty check etc
    and iam able to create planned & production order and confirma the production order.
    I want to configure for MRP: -
    Settings done are
    Have activeted planning file entry for all plants.
    When i run MRP system throws a error <b>Number range  for object MDTB does not exist - Message no.61501 </b>
    Is there anything to do with plant parameters OPPQ and Mrp Group OPPR.
    I just tried plant parameters,standard 0001 is not available for copying.
    Suggest me how to proceed to set MRP.
    Shankar

    Hi shankar
      it is a good practice while creating the plant copying the plant from the standard plant so that all the standard table enteries will be copied  for the plant as the standard plant is not there youcan think of copying from any other plant similar to your plant which has the required entry. else
    in SE16N  check the NRIV table for the Object MDTB. if enteris found then make the table entry with the help of abaper.
    hope this helps
    regards
    SK

  • Lightroom 5.6 does not run following latest CC Photoshop 2014 and Bridge updates

    I am running Creative Cloud Photography on OSX 10.9.4. Yesterday I updated Photoshop 2014 and Bridge using the CC desktop app as prompted by CC. Since then Lightroom does not run. When I open it the blue intro screen flashes up for less than a second. To try and recover I have uninstalled Lightroom (5.6) and re-installed it several times using both the CC app and directly from the Adobe website. The result is always the same. I can find nothing about this on Adobe Support although I can find others who have had the same symptoms on a web search. Their solution was to re-install Lightroom from the web site but that hasn't worked for me.  I had Lightroom installed before I went to CC and before CC included Lightroom in the Photography package. Does anyone understand this issue and can you please advise me what to try next? Many thanks.

    Okay, Solution 1 from this link Error "Unable to start correctly - 0Xc00007b" fixed it for me. But now it's asking me for the serial number which I can't find anywhere... shouldn't that go without with the cloud?

  • Font for photo info does not work on this MAC

    We are running a new MAC (OS 10.6.2, 2.66 GHz Quad) with Lightroom 2.6.  When I try to add photo data to a contact print, I see a series of boxes with AAAs.  I got the same result with the Identy Plate when I changed the font.  I changed to another font and it was fine.  This leads me to believe the default font for photo info is not supported on this machine.  We really need to use the photo info feature.  Is there a way to either
    1.  Change the font to one that is supported on this machine
    2.  Add the default font to this machine

    Considering the hundreds of thousands of Windows apps available, I doubt you're going to find such a list.
    Is there a comprehensive list posted somewhere that show which PC software has compatibity issues?
    Well since Windows software does not run on Mac OS, every application is going to have compatibility issues.
    You'll either have to buy the Mac version (if available) of the software you want to use, or install Windows on the Mac.

  • QT/KDE Java does not run

    I decided to learn Qt Java and KDEJava. I found some demo code here but I can't get it to work.
    It compiles fine.
    $ javac -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow.java
    But does not run.
    $ java -classpath $CLASSPATH:/opt/kde/lib/java/qtjava.jar ScribbleWindow
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no qtjava in java.library.path
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at org.kde.qt.qtjava.initialize(qtjava.java:272)
    at org.kde.qt.qtjava.<clinit>(qtjava.java:283)
    at ScribbleWindow.<clinit>(ScribbleWindow.java:300)
    $
    Wiki says that
    ==> Kdebindings has been built with support for Java and GTK.
    ==> If you want to use these features use the following pacman commands:
    ==> 'pacman -S j2sdk'
    ==> 'pacman -S gtk'
    I have kdebindings and j2sdk installed. After searching the forum I'm not sure if Wiki is right. Is kdebindings compiled with java support or not? Am I supposed to install or recompile something to get it working?

    phrakture wrote:
    ummm, try it like this:
    $ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
    It gives different error:
    $ java -classpath $CLASSPATH:/opt/kde/lib/java/ ScribbleWindow
    Exception in thread "main" java.lang.NoClassDefFoundError: org/kde/qt/QWidget
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$100(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)

  • I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I created in iMovie, and extracted audio from one of the clips to use in the title sequence.  All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

    I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1.  Thanks for any input.

Maybe you are looking for