Dispatcher gets stopped
Dear All,
I am facing a problem with IDES system. When I start the SAP from MMC console in windows 2003 with oracle database (ECC 5.0) the dispatcher gets stopped immediately after it tries to start the work process. All the work process ends up and dispatcher stops. But the message server and gateway service are still running.
Below the log of DEV_DISP and DEV_W0
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 07 20:13:35 2000
kernel runs with dp version 134(ext=102) (@(#) DPLIB-INT-VERSION-134)
length of sys_adm_ext is 312 bytes
sysno 01
sid DEV
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 175
intno 20020600
make: multithreaded, ASCII
pid 3048
***LOG Q00=> DpSapEnvInit, DPStart (01 3048) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
Mon Aug 07 20:13:40 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >MYS-705894_DEV_01 <
DpShMCreate: sizeof(wp_adm) 10768 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05640040, size: 2669600)
DpShMCreate: allocated sys_adm at 05640040
DpShMCreate: allocated wp_adm at 056417D8
DpShMCreate: allocated tm_adm_list at 056441E8
DpShMCreate: allocated tm_adm at 05644210
DpShMCreate: allocated wp_ca_adm at 05889250
DpShMCreate: allocated appc_ca_adm at 0588D8A0
DpShMCreate: allocated comm_adm_list at 0588F010
DpShMCreate: allocated comm_adm at 0588F028
DpShMCreate: allocated vmc_adm_list at 058BDE28
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 058BDE50
DpShMCreate: allocated wall_adm at 058BDE58
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1222 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 10051]
DpStartStopMsg: send start message (myname is >MYS-705894_DEV_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Mon Aug 07 20:14:20 2000
ERROR => W0 (pid 4420) died [dpxxdisp.c 12577]
ERROR => W1 (pid 4200) died [dpxxdisp.c 12577]
ERROR => W2 (pid 4408) died [dpxxdisp.c 12577]
ERROR => W3 (pid 4264) died [dpxxdisp.c 12577]
ERROR => W4 (pid 4504) died [dpxxdisp.c 12577]
ERROR => W5 (pid 4508) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1500) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 4516) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 1116) died [dpxxdisp.c 12577]
ERROR => W9 (pid 4524) died [dpxxdisp.c 12577]
ERROR => W10 (pid 832) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4548) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4556) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-4420 (SIGUSR2)
ERROR => DpWpKill(4420, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-4200 (SIGUSR2)
ERROR => DpWpKill(4200, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-4408 (SIGUSR2)
ERROR => DpWpKill(4408, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-4264 (SIGUSR2)
ERROR => DpWpKill(4264, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-4504 (SIGUSR2)
ERROR => DpWpKill(4504, SIGUSR2) failed [dpxxtool.c 2507]
killing W5-4508 (SIGUSR2)
ERROR => DpWpKill(4508, SIGUSR2) failed [dpxxtool.c 2507]
killing W6-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2507]
killing W7-4516 (SIGUSR2)
ERROR => DpWpKill(4516, SIGUSR2) failed [dpxxtool.c 2507]
killing W8-1116 (SIGUSR2)
ERROR => DpWpKill(1116, SIGUSR2) failed [dpxxtool.c 2507]
killing W9-4524 (SIGUSR2)
ERROR => DpWpKill(4524, SIGUSR2) failed [dpxxtool.c 2507]
killing W10-832 (SIGUSR2)
ERROR => DpWpKill(832, SIGUSR2) failed [dpxxtool.c 2507]
killing W11-4548 (SIGUSR2)
ERROR => DpWpKill(4548, SIGUSR2) failed [dpxxtool.c 2507]
killing W12-4556 (SIGUSR2)
ERROR => DpWpKill(4556, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:30 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 07 14:44:30 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4420 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 4408 Ended no 1 0 0
3 DIA 4264 Ended no 1 0 0
4 DIA 4504 Ended no 1 0 0
5 DIA 4508 Ended no 1 0 0
6 UPD 1500 Ended no 1 0 0
7 ENQ 4516 Ended no 1 0 0
8 BTC 1116 Ended no 1 0 0
9 BTC 4524 Ended no 1 0 0
10 BTC 832 Ended no 1 0 0
11 SPO 4548 Ended no 1 0 0
12 UP2 4556 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 07 14:44:30 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Aug 07 14:44:30 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , MYS-705894, 20:14:03, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Aug 07 14:44:30 2000
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:35 2000
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >MYS-705894_DEV_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (4380) (SOFT_KILL)
Stop icman
killing process (5532) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1516
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 965659480
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:4380 HANDLE:1636)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:36 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:4380 HANDLE:1636)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:37 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:38 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:39 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:40 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:41 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:42 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:43 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:44 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:45 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:46 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:5532 HANDLE:1644)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >MYS-705894_DEV_01 <)
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Mon Aug 07 20:14:47 2000
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10308]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1576
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3048) [dpxxdisp.c 8766]
Good Bye .....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Aug 07 20:13:40 2000
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M sysno 01
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 175
M intno 20020600
M make: multithreaded, ASCII
M pid 4420
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4420) [dpxxdisp.c 1162]
I
I Mon Aug 07 20:13:41 2000
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 10768 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05E40040, size: 2669600)
M DpShMCreate: allocated sys_adm at 05E40040
M DpShMCreate: allocated wp_adm at 05E417D8
M DpShMCreate: allocated tm_adm_list at 05E441E8
M DpShMCreate: allocated tm_adm at 05E44210
M DpShMCreate: allocated wp_ca_adm at 06089250
M DpShMCreate: allocated appc_ca_adm at 0608D8A0
M DpShMCreate: allocated comm_adm_list at 0608F010
M DpShMCreate: allocated comm_adm at 0608F028
M DpShMCreate: allocated vmc_adm_list at 060BDE28
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060BDE50
M DpShMCreate: allocated wall_adm at 060BDE58
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Aug 07 20:13:42 2000
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1281]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9595]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Aug 07 20:13:42 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4420) [dpnttool.c 357]
Please some one suggest me how to go about it.
Dear All,
Thanks for u r valuable suggestions and it helped a bit, but still my IDES is down and here I am attaching the latest DEV_W0. Please help me out.....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Aug 11 19:54:35 2000
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.55)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 10
M intno 20020600
M make: multithreaded, ASCII
M pid 2980
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2980) [dpxxdisp.c 1153]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M
M Fri Aug 11 19:54:36 2000
M DpShMCreate: sizeof(wp_adm) 9936 (828)
M DpShMCreate: sizeof(tm_adm) 2083168 (10364)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F40040, size: 2372048)
M DpShMCreate: allocated sys_adm at 04F40040
M DpShMCreate: allocated wp_adm at 04F417A8
M DpShMCreate: allocated tm_adm_list at 04F43E78
M DpShMCreate: allocated tm_adm at 04F43EA0
M DpShMCreate: allocated wp_ca_adm at 05140800
M DpShMCreate: allocated appc_ca_adm at 05144E50
M DpShMCreate: allocated comm_adm_list at 051465C0
M DpShMCreate: allocated comm_adm at 051465D8
M DpShMCreate: allocated vmc_adm_list at 051753D8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05175400
M DpShMCreate: allocated wall_adm at 05175408
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=H:\oracle9i\bin from environment
C
C Fri Aug 11 19:54:37 2000
C Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Attaching to DB Server DEV (con_hdl=0,svchp=077DAC64,svrhp=035835B4)
C
C Fri Aug 11 19:55:04 2000
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10256]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=077DAC64,usrhp=0358BDC8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4176]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 9891]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9377]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Aug 11 19:55:04 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9553
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 728]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 245]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2980) [dpnttool.c 357]
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Fri Aug 11 19:54:29 2000
kernel runs with dp version 127(ext=102) (@(#) DPLIB-INT-VERSION-127)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 10
intno 20020600
make: multithreaded, ASCII
pid 2776
***LOG Q00=> DpSapEnvInit, DPStart (01 2776) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 10 successfully loaded
shared lib "dw_xtc.dll" version 10 successfully loaded
shared lib "dw_stl.dll" version 10 successfully loaded
shared lib "dw_gui.dll" version 10 successfully loaded
Fri Aug 11 19:54:34 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3880]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 9936 (828)
DpShMCreate: sizeof(tm_adm) 2083168 (10364)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04680040, size: 2372048)
DpShMCreate: allocated sys_adm at 04680040
DpShMCreate: allocated wp_adm at 046817A8
DpShMCreate: allocated tm_adm_list at 04683E78
DpShMCreate: allocated tm_adm at 04683EA0
DpShMCreate: allocated wp_ca_adm at 04880800
DpShMCreate: allocated appc_ca_adm at 04884E50
DpShMCreate: allocated comm_adm_list at 048865C0
DpShMCreate: allocated comm_adm at 048865D8
DpShMCreate: allocated vmc_adm_list at 048B53D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 048B5400
DpShMCreate: allocated wall_adm at 048B5408
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1223 MB
<ES> 1222 blocks reserved for free list.
ES initialized.
Fri Aug 11 19:54:35 2000
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 9701]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 10
Release check o.K.
Fri Aug 11 19:55:15 2000
ERROR => W0 (pid 2980) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3280) died [dpxxdisp.c 12152]
ERROR => W2 (pid 1392) died [dpxxdisp.c 12152]
ERROR => W3 (pid 2800) died [dpxxdisp.c 12152]
ERROR => W4 (pid 3392) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 3456) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W6 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W7 (pid 2880) died [dpxxdisp.c 12152]
ERROR => W8 (pid 4000) died [dpxxdisp.c 12152]
ERROR => W9 (pid 3160) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 3424) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 3048) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2980 (SIGUSR2)
ERROR => DpWpKill(2980, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-1392 (SIGUSR2)
ERROR => DpWpKill(1392, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3392 (SIGUSR2)
ERROR => DpWpKill(3392, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3456 (SIGUSR2)
ERROR => DpWpKill(3456, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2880 (SIGUSR2)
ERROR => DpWpKill(2880, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-4000 (SIGUSR2)
ERROR => DpWpKill(4000, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-3160 (SIGUSR2)
ERROR => DpWpKill(3160, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-3424 (SIGUSR2)
ERROR => DpWpKill(3424, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-3048 (SIGUSR2)
ERROR => DpWpKill(3048, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:25 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Aug 11 14:25:25 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2980 Ended no 1 0 0
1 DIA 3280 Ended no 1 0 0
2 DIA 1392 Ended no 1 0 0
3 DIA 2800 Ended no 1 0 0
4 DIA 3392 Ended no 1 0 0
5 UPD 3456 Ended no 1 0 0
6 ENQ 3232 Ended no 1 0 0
7 BTC 2880 Ended no 1 0 0
8 BTC 4000 Ended no 1 0 0
9 BTC 3160 Ended no 1 0 0
10 SPO 3424 Ended no 1 0 0
11 UP2 3048 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 11 14:25:25 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Fri Aug 11 14:25:25 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 11 14:25:25 2000
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:30 2000
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3060) (SOFT_KILL)
Stop icman
killing process (436) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3060 HANDLE:1668)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:31 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3060 HANDLE:1668)
[DpProcDied] Process died (PID:436 HANDLE:1660)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1676
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2776) [dpxxdisp.c 8460]
Good Bye .....
Similar Messages
-
SAP Dispatcher getting stopped after successful DB restore sql server 2005
Dear Experts,
I have installed SAP ECC 6.0 with MSS 2005 on Windows 2003 x64. MSS DB and thereafter
SAP installtion was successful. I also logged on the system and checked a few things. Then we
performed a PRD data DB restore using MSS Management Studio and DB restore completed successfully.
Then we take a restart and tried to start SAP. Primarily I found it is starting and then when it come Dispatcher
getting stopped once i restarted the server also I tried with r3trans -d and its not executing please check the developer trace
and my server work directory in zip format attached please check the attachment
please help me to sort out this issue
Best Regards
SURESH .M
SAP BASIS CONSULTANTHi deepak ,
please check the trans log iam attached
r3trans -d getting return code 0012
please check it
4 ETW000 r3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.06.2014 - 16:57:13
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Jun 19 16:57:15 2014 41662 0.041662
4 ETW000 [dev trc ,00000] db_con_init called 142 0.041804
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 181 0.041985
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 138 0.042123
4 ETW000 [dev trc ,00000] load shared library (dbmssslib.dll), hdl 0 47141 0.089264
4 ETW000 [dev trc ,00000] using "D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll"
4 ETW000 130 0.089394
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 40 0.089434
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll
4 ETW000 63 0.089497
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "700.08", patchlevel (0.72)
4 ETW000 28593 0.118090
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll
4 ETW000 75 0.118165
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll
4 ETW000 70 0.118235
4 ETW000 [dev trc ,00000] New connection 0 created 11925 0.130160
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 163 0.130323
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 56 0.130379
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 60 0.130439
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 74 0.130513
4 ETW000 [dev trc ,00000] Thread ID:2196 16796 0.147309
4 ETW000 [dev trc ,00000] Thank You for using the SLOLEDB-interface 54 0.147363
4 ETW000 [dev trc ,00000] Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\uc\NTAMD64\dbmssslib.dll'
4 ETW000 76 0.147439
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 84 0.147523
4 ETW000 [dev trc ,00000] patchlevel 0 37 0.147560
4 ETW000 [dev trc ,00000] patchno 72 30 0.147590
4 ETW000 [dev trc ,00000] patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
4 ETW000 54 0.147644
4 ETW000 [dev trc ,00000] np:(local) connection used on PSPRD1 195 0.147839
4 ETW000 [dev trc ,00000] CopyLocalParameters: dbuser is 'prd' 44 0.147883
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 46841 0.194724
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 419 0.195143
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 121982 0.317125
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 211 0.317336
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 168 0.317504
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 38 0.317542
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 68 0.317610
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6271 0.323881
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 215 0.324096
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8723 0.332819
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.332941
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 141 0.333082
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 37 0.333119
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.333172
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6308 0.339480
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 209 0.339689
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8393 0.348082
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.348204
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 286 0.348490
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 42 0.348532
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 55 0.348587
4 ETW000 [dev trc ,00000] failed to establish conn to np:(local). 6478 0.355065
4 ETW000 [dev trc ,00000] Retrying without protocol specifier: (local) 49 0.355114
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 123 0.355237
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 214 0.355451
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 14045 0.369496
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 128 0.369624
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 141 0.369765
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 38 0.369803
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.369856
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 886 0.370742
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 226 0.370968
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8706 0.379674
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.379796
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 145 0.379941
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 37 0.379978
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.380031
4 ETW000 [dev trc ,00000] Using Provider SQLNCLI 6315 0.386346
4 ETW000 [dev trc ,00000] OpenOledbConnection: MARS property was set successfully.
4 ETW000 229 0.386575
4 ETW000 [dev trc ,00000] ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'prd' setuser 'prd']
4 ETW000 8701 0.395276
4 ETW000 [dev trc ,00000] ExecuteAndFlush: line 6324. hr: 0x80040e14 Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 122 0.395398
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 6324]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'prd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
4 ETW000 144 0.395542
4 ETW000 [dev trc ,00000] Procname: [ExecuteAndFlush - no proc] 34 0.395576
4 ETW000 [dev trc ,00000] setuser 'prd' failed -- connect terminated 53 0.395629
4 ETW000 [dev trc ,00000] failed to establish conn. 0 6497 0.402126
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 0 performing CON [dblink#3 @ 431]
4 ETW000 11973 0.414099
4 ETW000 [dblink ,00431] ***LOG BY0=><message text not available> [dblink#3 @ 431]
4 ETW000 55 0.414154
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PSPRD1' DBNAME = 'PRD'"
Best regards
suresh -
Dispatcher getting stopped due to possible user/schema mismatch.Plz help
Hello All,
I have SAP Netweaver 7.01 ABAP AS installed on windows 2003. Was working fine but I had to have a bug fixed in win 2003 and restarted my SAP machine. Now, dispatcher is not running. Stops after a while. I have tried restarting SAP and the machine but dispatcher is not running. I looked at the dispatcher trace and dev_w0 but could not figure out the reason as I am new to SAP, please provide any pointers to solve this issue. Any general tips is also welcome. Timely help is greatly appreciated!
I have pasted parts of dev_disp and dev_w0 below. If you require more details, please let me know. Thank you very much!
-Arvind
dev_disp:
=========
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 29
intno 20020600
make: multithreaded, Unicode, optimized
pid 3784
Fri Jun 10 19:25:12 2011
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3784) [dpxxdisp.c 1261]
shared lib "dw_xml.dll" version 29 successfully loaded
shared lib "dw_xtc.dll" version 29 successfully loaded
shared lib "dw_stl.dll" version 29 successfully loaded
shared lib "dw_gui.dll" version 29 successfully loaded
shared lib "dw_mdm.dll" version 29 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Jun 10 19:25:18 2011
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >egsap701_NSP_00 <
DpShMCreate: sizeof(wp_adm) 13632 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
DpShMCreate: allocated sys_adm at 07050040
DpShMCreate: allocated wp_adm at 07052170
DpShMCreate: allocated tm_adm_list at 070556B0
DpShMCreate: allocated tm_adm at 070556E0
DpShMCreate: allocated wp_ca_adm at 0748B760
DpShMCreate: allocated appc_ca_adm at 0748BDE0
DpShMCreate: allocated comm_adm at 0748C420
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0750D2E0
DpShMCreate: allocated gw_adm at 0750D320
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0750D350
DpShMCreate: allocated wall_adm at 0750D358
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
*** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
*** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( egsap701) [dpxxdisp.c 12362]
DpStartStopMsg: send start message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 29
Release check o.K.
Fri Jun 10 19:25:58 2011
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1565
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jun 10 19:26:08 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Workprocess Comm. Area Blocks Fri Jun 10 13:56:08 2011
=============================
Slots: 20, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
<SNIP>
[DpProcDied] Process died (PID:3492 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >egsap701_NSP_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=egsap701_NSP_00 , sapsysnr= 0, hostname=egsap701
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
<SNIP>
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1496
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3784) [dpxxdisp.c 10924]
Good Bye .....
dev_w0
========
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Jun 10 19:25:18 2011
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 29
M intno 20020600
M make: multithreaded, Unicode, optimized
M pid 2768
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2768) [dpxxdisp.c 1323]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 13632 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 1664 (80)
M DpShMCreate: sizeof(appc_ca_adm) 1600 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07050040, size: 5042120)
M DpShMCreate: allocated sys_adm at 07050040
M DpShMCreate: allocated wp_adm at 07052170
M DpShMCreate: allocated tm_adm_list at 070556B0
M DpShMCreate: allocated tm_adm at 070556E0
M DpShMCreate: allocated wp_ca_adm at 0748B760
M DpShMCreate: allocated appc_ca_adm at 0748BDE0
M DpShMCreate: allocated comm_adm at 0748C420
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0750D2E0
M DpShMCreate: allocated gw_adm at 0750D320
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0750D350
M DpShMCreate: allocated wall_adm at 0750D358
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
Y *** ERROR => ztta/cua_area is 180000. [sapinit.c 975]
Y *** ERROR => ztta/cua_area adjusted to 500000. [sapinit.c 979]
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host egsap701
M
M Fri Jun 10 19:25:19 2011
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.29)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 011-123-196-300
C SQLDBC client runtime is MaxDB 7.6.5.011 CL 196300
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.7.06 Build 007-123-197-046
C Database release is SAP DB 7.7.06.007
C INFO : Database 'NSP' instance is running on 'egsap701'
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C *** ERROR => the connected user (SAPNSP) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 2768
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server egsap701_NSP_00 on host egsap701 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Jun 10 19:25:19 2011
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2768) [dpnttool.c 334]Hello Rattandeep and Markus,
Thanks for explaining the error to me. I'm still facing the issue though!
My start profile is START_DVEBMGS00_egsap701 and instance profile is NSP_DVEBMGS00_egsap701 (they are included below).
In both profiles, the dbs/ada/schema has been currently deactivated. I get the same errors even after deactivating the parameter in both profiles. I also tried your suggestions by setting parameter values to SAPNSP and then to SAPR3 in both profiles but I'm still getting the same errors.
> the above log shows that you have to change the parameter with schema user SAPR3 instead of SAPNSP
You mean that the SAP system is started by SAPNSP user and since the profile is executed by SAPNSP user, we are getting the error? I don't know about the SAPR3 user or the user's credential. I only use bcuser/ddic RFC user to logon to SAP.
I don't know how to check the table space for SAPR3 database. As far as I know, BRTools is only for Oracle backends. So, I used Max DB database manager tool instead and found that the default NSP database has utilized about 50% data area (disk space). Overwrite mode is on and I have about 100% free log area (also determined through database manager tool). Still have not clue as to how to solve this. Please help. Thanks for your tips so far!
The start profile is as follows :
#.* Start profile START_DVEBMGS00_EGSAP701 *
#.* Version = 000004 *
#.* Generated by user = DDIC *
#.* Generated on = 27.04.2011 , 11:02:57 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
DIR_PROFILE = $(DIR_INSTALL)\profile
_PF = $(DIR_PROFILE)\NSP_DVEBMGS00_egsap701
# Copy SAP Executables
Start_Program_00 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
# Start ABAP database
_DB = $(DIR_CT_RUN)\strdbs.cmd
Start_Program_01 = immediate $(_DB) NSP
# Start SAP message server
_MS = $(DIR_EXECUTABLE)\msg_server$(FT_EXE)
Start_Program_02 = local $(_MS) pf=$(_PF)
# Start application server
_DW = $(DIR_EXECUTABLE)\disp+work$(FT_EXE)
Start_Program_03 = local $(_DW) pf=$(_PF)
rsdb/dbid = NSP
#dbs/ada/schema = SAPNSP
Instance profile is as follows:
#.* Instance profile NSP_DVEBMGS00_EGSAP701 *
#.* Version = 000006 *
#.* Generated by user = DDIC *
#.* Generated on = 27.05.2011 , 11:30:39 *
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = egsap701
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
# SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
PHYS_MEMSIZE = 128
em/initial_size_MB = 10240
em/max_size_MB = 1024
abap/buffersize = 100000
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 60000000 changed: DDIC 27.05.2011 11:29:55
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
#parameter deactivated by: DDIC 27.05.2011 11:11:00
#rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 180000
rdisp/PG_SHM = 100
rdisp/PG_MAXFS = 256
rdisp/ROLL_SHM = 100
rdisp/ROLL_MAXFS = 2048
#old_value: 0 changed: DDIC 27.04.2011 11:04:52
#old_value: 300 changed: DDIC 27.05.2011 11:29:38
rdisp/autoabaptime = 0
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 30000
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
mpi/total_size_MB = 10
rsdb/dbid = NSP
#parameter deactivated by: DDIC 27.05.2011 11:11:22
#dbs/ada/schema = SAPNSP -
Dear All,
I am facing a problem with IDES system. When I start the SAP from MMC console in windows 2003 with oracle database (ECC 5.0) the dispatcher gets stopped immediately after it tries to start the work process. All the work process ends up and dispatcher stops. But the message server and gateway service are still running.
Below the log of DEV_DISP and DEV_W0
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 07 20:13:35 2000
kernel runs with dp version 134(ext=102) (@(#) DPLIB-INT-VERSION-134)
length of sys_adm_ext is 312 bytes
sysno 01
sid DEV
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 175
intno 20020600
make: multithreaded, ASCII
pid 3048
***LOG Q00=> DpSapEnvInit, DPStart (01 3048) [dpxxdisp.c 1102]
shared lib "dw_xml.dll" version 175 successfully loaded
shared lib "dw_xtc.dll" version 175 successfully loaded
shared lib "dw_stl.dll" version 175 successfully loaded
shared lib "dw_gui.dll" version 175 successfully loaded
shared lib "dw_mdm.dll" version 175 successfully loaded
Mon Aug 07 20:13:40 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >MYS-705894_DEV_01 <
DpShMCreate: sizeof(wp_adm) 10768 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05640040, size: 2669600)
DpShMCreate: allocated sys_adm at 05640040
DpShMCreate: allocated wp_adm at 056417D8
DpShMCreate: allocated tm_adm_list at 056441E8
DpShMCreate: allocated tm_adm at 05644210
DpShMCreate: allocated wp_ca_adm at 05889250
DpShMCreate: allocated appc_ca_adm at 0588D8A0
DpShMCreate: allocated comm_adm_list at 0588F010
DpShMCreate: allocated comm_adm at 0588F028
DpShMCreate: allocated vmc_adm_list at 058BDE28
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 058BDE50
DpShMCreate: allocated wall_adm at 058BDE58
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1222 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 10051]
DpStartStopMsg: send start message (myname is >MYS-705894_DEV_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Mon Aug 07 20:14:20 2000
ERROR => W0 (pid 4420) died [dpxxdisp.c 12577]
ERROR => W1 (pid 4200) died [dpxxdisp.c 12577]
ERROR => W2 (pid 4408) died [dpxxdisp.c 12577]
ERROR => W3 (pid 4264) died [dpxxdisp.c 12577]
ERROR => W4 (pid 4504) died [dpxxdisp.c 12577]
ERROR => W5 (pid 4508) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 1500) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 4516) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 1116) died [dpxxdisp.c 12577]
ERROR => W9 (pid 4524) died [dpxxdisp.c 12577]
ERROR => W10 (pid 832) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4548) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4556) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-4420 (SIGUSR2)
ERROR => DpWpKill(4420, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-4200 (SIGUSR2)
ERROR => DpWpKill(4200, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-4408 (SIGUSR2)
ERROR => DpWpKill(4408, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-4264 (SIGUSR2)
ERROR => DpWpKill(4264, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-4504 (SIGUSR2)
ERROR => DpWpKill(4504, SIGUSR2) failed [dpxxtool.c 2507]
killing W5-4508 (SIGUSR2)
ERROR => DpWpKill(4508, SIGUSR2) failed [dpxxtool.c 2507]
killing W6-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2507]
killing W7-4516 (SIGUSR2)
ERROR => DpWpKill(4516, SIGUSR2) failed [dpxxtool.c 2507]
killing W8-1116 (SIGUSR2)
ERROR => DpWpKill(1116, SIGUSR2) failed [dpxxtool.c 2507]
killing W9-4524 (SIGUSR2)
ERROR => DpWpKill(4524, SIGUSR2) failed [dpxxtool.c 2507]
killing W10-832 (SIGUSR2)
ERROR => DpWpKill(832, SIGUSR2) failed [dpxxtool.c 2507]
killing W11-4548 (SIGUSR2)
ERROR => DpWpKill(4548, SIGUSR2) failed [dpxxtool.c 2507]
killing W12-4556 (SIGUSR2)
ERROR => DpWpKill(4556, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:30 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 07 14:44:30 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4420 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 4408 Ended no 1 0 0
3 DIA 4264 Ended no 1 0 0
4 DIA 4504 Ended no 1 0 0
5 DIA 4508 Ended no 1 0 0
6 UPD 1500 Ended no 1 0 0
7 ENQ 4516 Ended no 1 0 0
8 BTC 1116 Ended no 1 0 0
9 BTC 4524 Ended no 1 0 0
10 BTC 832 Ended no 1 0 0
11 SPO 4548 Ended no 1 0 0
12 UP2 4556 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 07 14:44:30 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Aug 07 14:44:30 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , MYS-705894, 20:14:03, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Aug 07 14:44:30 2000
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:35 2000
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >MYS-705894_DEV_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (4380) (SOFT_KILL)
Stop icman
killing process (5532) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1516
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 965659480
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:4380 HANDLE:1636)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:36 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:4380 HANDLE:1636)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:37 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:38 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:39 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:40 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:41 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:42 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:43 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:44 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:45 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:5532 HANDLE:1644)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 07 20:14:46 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:5532 HANDLE:1644)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >MYS-705894_DEV_01 <)
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Mon Aug 07 20:14:47 2000
NiIPeek: peek for hdl 3 / socket 1576 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10308]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1576
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3048) [dpxxdisp.c 8766]
Good Bye .....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Aug 07 20:13:40 2000
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M sysno 01
M sid DEV
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 175
M intno 20020600
M make: multithreaded, ASCII
M pid 4420
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4420) [dpxxdisp.c 1162]
I
I Mon Aug 07 20:13:41 2000
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 10768 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05E40040, size: 2669600)
M DpShMCreate: allocated sys_adm at 05E40040
M DpShMCreate: allocated wp_adm at 05E417D8
M DpShMCreate: allocated tm_adm_list at 05E441E8
M DpShMCreate: allocated tm_adm at 05E44210
M DpShMCreate: allocated wp_ca_adm at 06089250
M DpShMCreate: allocated appc_ca_adm at 0608D8A0
M DpShMCreate: allocated comm_adm_list at 0608F010
M DpShMCreate: allocated comm_adm at 0608F028
M DpShMCreate: allocated vmc_adm_list at 060BDE28
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060BDE50
M DpShMCreate: allocated wall_adm at 060BDE58
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Aug 07 20:13:42 2000
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4484]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1281]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9595]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Aug 07 20:13:42 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4420) [dpnttool.c 357]
Please some one suggest me how to go about it.Hi,
Thanks for u r valuable suggestion and it helped a bit, but still my IDES is down and here I am attaching the latest DEV_W0. Please help me out.....
DEV_W0
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Aug 11 19:54:35 2000
B create_con (con_name=R/3)
B Loading DB library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'J:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.55)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 10
M intno 20020600
M make: multithreaded, ASCII
M pid 2980
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2980) [dpxxdisp.c 1153]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M
M Fri Aug 11 19:54:36 2000
M DpShMCreate: sizeof(wp_adm) 9936 (828)
M DpShMCreate: sizeof(tm_adm) 2083168 (10364)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F40040, size: 2372048)
M DpShMCreate: allocated sys_adm at 04F40040
M DpShMCreate: allocated wp_adm at 04F417A8
M DpShMCreate: allocated tm_adm_list at 04F43E78
M DpShMCreate: allocated tm_adm at 04F43EA0
M DpShMCreate: allocated wp_ca_adm at 05140800
M DpShMCreate: allocated appc_ca_adm at 05144E50
M DpShMCreate: allocated comm_adm_list at 051465C0
M DpShMCreate: allocated comm_adm at 051465D8
M DpShMCreate: allocated vmc_adm_list at 051753D8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05175400
M DpShMCreate: allocated wall_adm at 05175408
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=H:\oracle9i\bin from environment
C
C Fri Aug 11 19:54:37 2000
C Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Attaching to DB Server DEV (con_hdl=0,svchp=077DAC64,svrhp=035835B4)
C
C Fri Aug 11 19:55:04 2000
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10256]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=077DAC64,usrhp=0358BDC8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@DEV on connection 0 (nls_hdl 0) ...
C Nls Characterset Natcharacterset C EnvHp ErrHp ErrHpBatch
C 0 1 0357EF98 077DB2A8 077DAD10
C Starting user session (con_hdl=0,svchp=077DAC64,srvhp=035835B4,usrhp=0358BDC8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4176]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 9891]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9377]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server MYS-705894_DEV_01 on host MYS-705894 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Aug 11 19:55:04 2000
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9553
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 728]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 245]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2980) [dpnttool.c 357]
DEV_DISP
trc file: "dev_disp", trc level: 1, release: "640"
Fri Aug 11 19:54:29 2000
kernel runs with dp version 127(ext=102) (@(#) DPLIB-INT-VERSION-127)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 10
intno 20020600
make: multithreaded, ASCII
pid 2776
***LOG Q00=> DpSapEnvInit, DPStart (01 2776) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 10 successfully loaded
shared lib "dw_xtc.dll" version 10 successfully loaded
shared lib "dw_stl.dll" version 10 successfully loaded
shared lib "dw_gui.dll" version 10 successfully loaded
Fri Aug 11 19:54:34 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3880]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 9936 (828)
DpShMCreate: sizeof(tm_adm) 2083168 (10364)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04680040, size: 2372048)
DpShMCreate: allocated sys_adm at 04680040
DpShMCreate: allocated wp_adm at 046817A8
DpShMCreate: allocated tm_adm_list at 04683E78
DpShMCreate: allocated tm_adm at 04683EA0
DpShMCreate: allocated wp_ca_adm at 04880800
DpShMCreate: allocated appc_ca_adm at 04884E50
DpShMCreate: allocated comm_adm_list at 048865C0
DpShMCreate: allocated comm_adm at 048865D8
DpShMCreate: allocated vmc_adm_list at 048B53D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 048B5400
DpShMCreate: allocated wall_adm at 048B5408
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1223 MB
<ES> 1222 blocks reserved for free list.
ES initialized.
Fri Aug 11 19:54:35 2000
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MYS-705894) [dpxxdisp.c 9701]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 10
Release check o.K.
Fri Aug 11 19:55:15 2000
ERROR => W0 (pid 2980) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3280) died [dpxxdisp.c 12152]
ERROR => W2 (pid 1392) died [dpxxdisp.c 12152]
ERROR => W3 (pid 2800) died [dpxxdisp.c 12152]
ERROR => W4 (pid 3392) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W5 (pid 3456) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W6 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W7 (pid 2880) died [dpxxdisp.c 12152]
ERROR => W8 (pid 4000) died [dpxxdisp.c 12152]
ERROR => W9 (pid 3160) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 3424) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 3048) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2980 (SIGUSR2)
ERROR => DpWpKill(2980, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-1392 (SIGUSR2)
ERROR => DpWpKill(1392, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2800 (SIGUSR2)
ERROR => DpWpKill(2800, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3392 (SIGUSR2)
ERROR => DpWpKill(3392, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3456 (SIGUSR2)
ERROR => DpWpKill(3456, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-2880 (SIGUSR2)
ERROR => DpWpKill(2880, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-4000 (SIGUSR2)
ERROR => DpWpKill(4000, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-3160 (SIGUSR2)
ERROR => DpWpKill(3160, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-3424 (SIGUSR2)
ERROR => DpWpKill(3424, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-3048 (SIGUSR2)
ERROR => DpWpKill(3048, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:25 2000
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Aug 11 14:25:25 2000
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2980 Ended no 1 0 0
1 DIA 3280 Ended no 1 0 0
2 DIA 1392 Ended no 1 0 0
3 DIA 2800 Ended no 1 0 0
4 DIA 3392 Ended no 1 0 0
5 UPD 3456 Ended no 1 0 0
6 ENQ 3232 Ended no 1 0 0
7 BTC 2880 Ended no 1 0 0
8 BTC 4000 Ended no 1 0 0
9 BTC 3160 Ended no 1 0 0
10 SPO 3424 Ended no 1 0 0
11 UP2 3048 Ended no 1 0 0
Dispatcher Queue Statistics Fri Aug 11 14:25:25 2000
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Fri Aug 11 14:25:25 2000
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Aug 11 14:25:25 2000
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:30 2000
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3060) (SOFT_KILL)
Stop icman
killing process (436) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3060 HANDLE:1668)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1697
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Aug 11 19:55:31 2000
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3060 HANDLE:1668)
[DpProcDied] Process died (PID:436 HANDLE:1660)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'MYS-705894'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1676
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2776) [dpxxdisp.c 8460]
Good Bye ..... -
After installing 4.7 the dispatcher is getting stopped
hi gurus, i am installing 4.7 after installation i got the message like successfully complted , when iam trying to start the MMC but the dispatcher is getting stopped please check this log -
trc file: "dev_disp", trc level: 1, release: "620"
Tue Jan 08 14:21:04 2008
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 300
***LOG Q00=> DpSapEnvInit, DPStart (00 300) [dpxxdisp.c 966]
shared lib "dw_xml.dll" version 252 successfully loaded
shared lib "dw_xtc.dll" version 252 successfully loaded
shared lib "dw_stl.dll" version 252 successfully loaded
Tue Jan 08 14:21:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3140]
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 916 MB
<ES> 915 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( dev) [dpxxdisp.c 8832]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Tue Jan 08 14:21:10 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Tue Jan 08 14:22:09 2008
ERROR => W0 (pid 892) died [dpxxdisp.c 11210]
ERROR => W1 (pid 616) died [dpxxdisp.c 11210]
Tue Jan 08 14:22:29 2008
ERROR => W2 (pid 964) died [dpxxdisp.c 11210]
ERROR => W3 (pid 1032) died [dpxxdisp.c 11210]
ERROR => W4 (pid 1064) died [dpxxdisp.c 11210]
ERROR => W5 (pid 736) died [dpxxdisp.c 11210]
ERROR => W6 (pid 1128) died [dpxxdisp.c 11210]
ERROR => W7 (pid 1184) died [dpxxdisp.c 11210]
ERROR => W8 (pid 1152) died [dpxxdisp.c 11210]
ERROR => W9 (pid 1360) died [dpxxdisp.c 11210]
ERROR => W10 (pid 548) died [dpxxdisp.c 11210]
ERROR => W11 (pid 1396) died [dpxxdisp.c 11210]
ERROR => W12 (pid 1404) died [dpxxdisp.c 11210]
ERROR => W13 (pid 1408) died [dpxxdisp.c 11210]
ERROR => W14 (pid 1416) died [dpxxdisp.c 11210]
ERROR => W15 (pid 1428) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Tue Jan 08 14:22:36 2008
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 300) [dpxxdisp.c 7637]
cheersHi kaushal ,
here dis is the log file which u asked
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue Jan 08 15:03:01 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.112)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 396
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 396) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Tue Jan 08 15:03:02 2008
X EmInit: MmSetImplementation( 2 ).
X
X Tue Jan 08 15:03:03 2008
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue Jan 08 15:03:06 2008
M calling db_connect ...
C Got ORACLE_HOME=E:\oracle\ora81 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=02F5EE78,svrhp=02F5EC84)
C Starting user session (con_hdl=0,svchp=02F5EE78,srvhp=02F5EC84,usrhp=0612CB2C)
C
C Tue Jan 08 15:03:07 2008
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=02F5EE78,srvhp=02F5EC84,usrhp=0612CB2C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1017'
[dboci.c 9536]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server dev_DEV_00 on host dev (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue Jan 08 15:03:07 2008
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 396) [dpnttool.c 345] -
Java Dispatcher and Server0 is getting stopped
Hi,
I have changed the password of admin/password/EC6 and jdbc/pool/EC6/Password by loggin into config tool and selecting Secure Store & restarted the java instance.
SDM is starting fine but dispatcher & server0 is getting stopped.
Pls. Find the contents of "std_server0.out"
stdout/stderr redirect
node name : server0
pid : 34028
system name : EC6
system nr. : 02
started at : Thu Jun 11 08:45:30 2009
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 64260] MtxInit: 10001 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 578 ms.
Loading: PoolManager ... 16 ms.
Loading: ApplicationThreadManager ... 125 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 31 ms.
Loading: ClassLoaderManager ... 31 ms.
Loading: ClusterManager ... 328 ms.
Loading: LockingManager ... 94 ms.
Loading: ConfigurationManager ...
Loading: ConfigurationManager returned false!
Kernel not loaded. System halted.
stdout/stderr redirect
node name : server0
pid : 34028
system name : EC6
system nr. : 02
started at : Thu Jun 11 08:45:40 2009
Reserved 1610612736 (0x60000000) bytes before loading DLLs.
[Thr 60832] MtxInit: 10001 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 7.00 PatchLevel is starting...
Loading: LogManager ... 563 ms.
Loading: PoolManager ... 16 ms.
Loading: ApplicationThreadManager ... 109 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 31 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 375 ms.
Loading: LockingManager ... 94 ms.
Loading: ConfigurationManager ...
Loading: ConfigurationManager returned false!
Kernel not loaded. System halted.
Pls. find the content of In "dev_w0" file:
M Thu Jun 11 07:57:47 2009
M *** ERROR => SosIAnchorArrayCreatable: T15/M0 in state cancel [thxxtool2.c 947]
M
M Thu Jun 11 08:04:00 2009
M *** WARNING => ThSndDelUser: delete client/user 100/J2EE_ADMIN (T17) on server IGATESAP07_EC6_02
M
M Thu Jun 11 08:13:17 2009
M TskhLoop: waited 1 seconds for arrival of softcancel signalA
A Thu Jun 11 08:42:44 2009
A A GENER request remote generation: SAPLMLSR.
C
C Thu Jun 11 08:43:24 2009
C build_stmt: reallocating stmt buffer: 3584 -> 4591 characters
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
Please suggest me on this
Thanks,
SubbuHi Saurabh,
I have changed the password of SAPSR3DB as per the note and then java dispatcher and server0 has come up..
Could you please clarify whats the need again to change the passowrd of SAP<SID>DB and also pls. suggest me the procedure and the need to do the following:
Please note that once you have stopped the instance, please also remove the shared memory so that we can ensure that no more conflicts will be occurred
Thanks,
Subbu -
Dispatcher has stopped !!
Dear friends,
I would like you to share your experience on the following problem. Our IDES Server ECC 6 is unable to start since the dispatcher process gets stopped everytime.
<b>Here's the log file :: dev_disp</b>
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DMO
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, Unicode, optimized
pid 2392
Mon Nov 26 16:28:29 2007
kernel runs with dp version 218000(ext=109000) (@(#) DPLIB-INT-VERSION-218000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2392) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Nov 26 16:28:46 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0080.qqq.nxst) took 17 seconds
Mon Nov 26 16:28:54 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 8 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >khi-sap-2_DMO_00 <
DpShMCreate: sizeof(wp_adm) 16896 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D60040, size: 4651960)
DpShMCreate: allocated sys_adm at 05D60040
DpShMCreate: allocated wp_adm at 05D61E40
DpShMCreate: allocated tm_adm_list at 05D66040
DpShMCreate: allocated tm_adm at 05D66070
DpShMCreate: allocated wp_ca_adm at 06135310
DpShMCreate: allocated appc_ca_adm at 0613B0D0
DpShMCreate: allocated comm_adm at 0613D010
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 061BDED0
DpShMCreate: allocated gw_adm at 061BDF10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 061BDF40
DpShMCreate: allocated wall_adm at 061BDF48
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1625]
Mon Nov 26 16:28:55 2007
***LOG Q0K=> DpMsAttach, mscon ( khi-sap-2) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >khi-sap-2_DMO_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Mon Nov 26 16:30:55 2007
ERROR => W0 (pid 2860) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2040) died [dpxxdisp.c 14299]
ERROR => W2 (pid 2176) died [dpxxdisp.c 14299]
ERROR => W3 (pid 3892) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2484) died [dpxxdisp.c 14299]
ERROR => W5 (pid 3624) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 476) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3976) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2552) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3128) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W10 (pid 3232) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W11 (pid 3064) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:05 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Nov 26 11:31:05 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2860 Ended no 1 0 0
1 DIA 2040 Ended no 1 0 0
2 DIA 2176 Ended no 1 0 0
3 DIA 3892 Ended no 1 0 0
4 DIA 2484 Ended no 1 0 0
5 DIA 3624 Ended no 1 0 0
6 UPD 476 Ended no 1 0 0
7 ENQ 3976 Ended no 1 0 0
8 BTC 2552 Ended no 1 0 0
9 BTC 3128 Ended no 1 0 0
10 SPO 3232 Ended no 1 0 0
11 UP2 3064 Ended no 1 0 0
Dispatcher Queue Statistics Mon Nov 26 11:31:05 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
8
8
2000
8
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 16
wake_evt_udp_now 1
wake events total 11, udp 9 ( 81%), shm 2 ( 18%)
since last update total 11, udp 9 ( 81%), shm 2 ( 18%)
Dump of tm_adm structure: Mon Nov 26 11:31:05 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T12, U13, , khi-sap-2, 16:29:02, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Nov 26 11:31:05 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:10 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >khi-sap-2_DMO_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3268) (SOFT_KILL)
Stop icman
killing process (3236) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 12
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/12
LOCK WP ca_blk 2
return errno (-17) to T12
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T12 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1496 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1496
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1496
NiBufIClose: clear extension for hdl 5
dp_tm_adm[12].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1196076655/927000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 12
DpListInsert: insert elem 12 into tmadm_free_list (at begin)
DpListInsert: 189 elems in tmadm_free_list
DpListRemove: remove elem 12 from tmadm_inuse_list
DpListRemove: 12 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3268 HANDLE:1604)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3268 HANDLE:1604)
wait for end of icman
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3236 HANDLE:1608)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1633
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Nov 26 16:31:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3236 HANDLE:1608)
DpStartStopMsg: send stop message (myname is >khi-sap-2_DMO_00 <)
NiIMyHostName: hostname = 'khi-sap-2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Nov 26 16:31:23 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1548 (pos=2)
SiSelNRemove: removed sock 1548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/12
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2392) [dpxxdisp.c 10317]
Good Bye .....
<b>Following this you would also need to review another log file which is :: dev_w0</b>
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Nov 26 16:28:55 2007
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DMO\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.80)
B New connection 0 created
M sysno 00
M sid DMO
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 2860
M
M kernel runs with dp version 218000(ext=109000) (@(#) DPLIB-INT-VERSION-218000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2860) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 16896 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D60040, size: 4651960)
M DpShMCreate: allocated sys_adm at 05D60040
M DpShMCreate: allocated wp_adm at 05D61E40
M DpShMCreate: allocated tm_adm_list at 05D66040
M DpShMCreate: allocated tm_adm at 05D66070
M DpShMCreate: allocated wp_ca_adm at 06135310
M DpShMCreate: allocated appc_ca_adm at 0613B0D0
M DpShMCreate: allocated comm_adm at 0613D010
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 061BDED0
M DpShMCreate: allocated gw_adm at 061BDF10
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 061BDF40
M DpShMCreate: allocated wall_adm at 061BDF48
X
X Mon Nov 26 16:28:56 2007
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host khi-sap-2
M
M Mon Nov 26 16:28:57 2007
M calling db_connect ...
C Prepending E:\usr\sap\DMO\DVEBMGS00\exe to Path.
C
C Mon Nov 26 16:28:58 2007
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMO on connection 0 (nls_hdl 0) ... (dbsl 700 250806)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0631BE78 06321414 06320C9C
C Attaching to DB Server DMO (con_hdl=0,svchp=06320BE8,svrhp=063320F4)
C
C Mon Nov 26 16:29:55 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@DMO on connection 0 (nls_hdl 0) ... (dbsl 700 250806)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0631BE78 06321414 06320C9C
C Detaching from DB Server (con_hdl=0,svchp=06320BE8,srvhp=063320F4)
C Attaching to DB Server DMO (con_hdl=0,svchp=06320BE8,svrhp=063320F4)
C
C Mon Nov 26 16:30:52 2007
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12154'
[dbsloci.c 10933]
B ***LOG BV3=> severe db error 12154 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 12154 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-12154: TNS:could not resolve the connect identifier specified [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server khi-sap-2_DMO_00 on host khi-sap-2 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Nov 26 16:30:52 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2860) [dpnttool.c 327]
I would very much thankful to you in this regard if you can help me resolve this issue please!
Best Regards,
MuzammilHi
You need to check strdbs.cmd is started or not, because this is the one which starts the database.As all the programs reside in the database, check whether ur database is up or not.
Hope this gives you an idea
Regards
Sudhakar Manoharan -
While starting the SAP, Disp+Work.exe is getting stopped
Hi All,
SAP Discovery System has been installed. While starting the SAP, Disp+Work.exe is getting stopped. But I checked MaxDB and it is working fine.
Kindly look into the below log dev_disp and advice me the solution.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 10
sid ERP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 119
intno 20050900
make: multithreaded, Unicode, optimized
pid 2420
Mon Sep 15 20:16:06 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 2420) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 119 successfully loaded
shared lib "dw_xtc.dll" version 119 successfully loaded
shared lib "dw_stl.dll" version 119 successfully loaded
shared lib "dw_gui.dll" version 119 successfully loaded
shared lib "dw_mdm.dll" version 119 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3910
Mon Sep 15 20:16:11 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ORX-SAPDEMO_ERP_10 <
DpShMCreate: sizeof(wp_adm) 17232 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06E70040, size: 4929464)
DpShMCreate: allocated sys_adm at 06E70040
DpShMCreate: allocated wp_adm at 06E72090
DpShMCreate: allocated tm_adm_list at 06E763E0
DpShMCreate: allocated tm_adm at 06E76410
DpShMCreate: allocated wp_ca_adm at 07288F10
DpShMCreate: allocated appc_ca_adm at 0728ECD0
DpShMCreate: allocated comm_adm at 07290C10
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07311AD0
DpShMCreate: allocated gw_adm at 07311B10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07311B40
DpShMCreate: allocated wall_adm at 07311B48
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2672
argv[0] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[2] = pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=3500
argv[5] = -DSAPSYSTEM=10
argv[6] = -DSAPSYSTEMNAME=ERP
argv[7] = -DSAPMYNAME=ORX-SAPDEMO_ERP_10
argv[8] = -DSAPPROFILE=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( iwdfvm2160) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >ORX-SAPDEMO_ERP_10 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Sep 15 20:16:12 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 119
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Sep 15 20:16:15 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3504) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2672)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Sep 15 20:16:51 2008
ERROR => DpHdlDeadWp: W0 (pid 4952) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 4852) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 5976) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 5000) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 4984) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W5 (pid 1272) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W6 (pid 528) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W7 (pid 5720) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2648) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 5444) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W10 (pid 5032) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W11 (pid 5620) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:01 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Sep 16 03:17:01 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4952 Ended no 1 0 0
1 DIA 4852 Ended no 1 0 0
2 DIA 5976 Ended no 1 0 0
3 DIA 5000 Ended no 1 0 0
4 DIA 4984 Ended no 1 0 0
5 UPD 1272 Ended no 1 0 0
6 ENQ 528 Ended no 1 0 0
7 ENQ 5720 Ended no 1 0 0
8 BTC 2648 Ended no 1 0 0
9 BTC 5444 Ended no 1 0 0
10 SPO 5032 Ended no 1 0 0
11 UP2 5620 Ended no 1 0 0
Dispatcher Queue Statistics Tue Sep 16 03:17:01 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Tue Sep 16 03:17:01 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Sep 16 03:17:01 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:06 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ORX-SAPDEMO_ERP_10 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1516) (SOFT_KILL)
Stop icman
killing process (1256) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1516 HANDLE:1520)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1516 HANDLE:1520)
wait for end of icman
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:17 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1256 HANDLE:1528)
[DpProcDied] Process died (PID:2672 HANDLE:1504)
DpStartStopMsg: send stop message (myname is >ORX-SAPDEMO_ERP_10 <)
NiIMyHostName: hostname = 'ORX-SAPDEMO'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Sep 15 20:17:19 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1508 (pos=3)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1508
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2420) [dpxxdisp.c 10417]
Good Bye .....
Thanks in advance.
Regards,
SuneethaHi,
Just check out your filesystem/ directory have sufficient space.
Do paste us dev_rd as the error above " NiIRead: SiRecv failed for "
pasted looks like system uanble to access SAP gateway.
Rgds
Radhakrishna D S -
Error while starting NW server and j2ee server is getting stopped.
Hi,
I am working in NW04s. It contains ABAP sp5 and java sp9 versions. The server was working find till ten days back. After the gap of ten days, when i started to work on this SAP system, i was not able to start the j2ee server. During the startup of the server itself, j2ee server is getting stopped and dispatcher also. Following is the error bunch I got in trace. If any one has any idea about this, please reply this soon.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: <Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='UME initialization failed.', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key UME initialization failed.
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:372)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=garden SYSNR=00 GWHOST=garden GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner '15.70.176.191:sapgw00' broken
TIME Mon Nov 13 12:45:30 2006
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 4207
DETAIL NiIRead
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER 4
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:178)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:356)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:156)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:109)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:56)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:266)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:279)
... 6 more
#1.5#000E7FFD8B5D001D00000011000008540004221BAAB8047C#1163402130490#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_54##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#> ceException: Connect to SAP gateway failed
> Connect_PM TYPE=A ASHOST=garden SYSNR=00
> GWHOST=garden GWSERV=sapgw00 PCS=1
>
> LOCATION CPIC (TCP/IP) on local host with Unicode
> ERROR connection to partner
> '15.70.176.191:sapgw00' broken
You can ping this machine from your portal-nodes and you can connect to the port "sapgw00" (should be 3300) ?
> ##0#0#Fatal#1#/System/Server#Plain###Critical
> shutdown was invoked. Reason is: Core service
> com.sap.security.core.ume.service failed. J2EE Engine
> cannot be started.#
This is the reason why your j2ee-server stops - the portal can't connect to the ume. What did you configured as the ume - the portal database, a ldap-server or a r3-system ?
Regards
Norman -
Server0 getting stopped after system copy
All,
We did a export/import process of the portal system from Dev system to Sandbox system. After which when i tried to start, dispatcher and SDM are running but server0 is getting stopped. Based on std_server0.out file, following is getting repeated:
Can't find resource for bundle java.util.PropertyResourceBundle, key Stub c
lass not found: com.sap.engine.services.file.FileTransferImpl_Stub; nested excep
tion is:
java.lang.ClassNotFoundException: com.sap.engine.services.file.FileTrans
ferImpl_Stub
Loader Info -
ClassLoader name: [service:file]
Parent loader name: [Frame ClassLoader]
References:
interface:cross
common:service:iiop;service:naming;service:p4;service:ts
Resources:
/usr/sap/SP7/JC00/j2ee/cluster/server0/bin/services/file/file.jar.
Is there anything in particular to be done after import wherein it will hold anything related to source system which needs to be changed ?
Thanks,
Murali.Issue is solved. Removed a parameter from configtool in a wrong way. After inserting the proper values back, this error is gone
Thanks -
Solution Manager's Dispatcher is STOP.
Hi Experts,
I have installed Solution manager successfully on windows 2003.
On the same Server I have successfully installed ERP 2005.Now Solution manager's Dispatcher is STOP,where ERP 2005 is running successfully. If anybody know the solution please help me out.
Points would be rewarded for the same.
Thanks n Regards
Ajit KeshriHi Markus
Here is log dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 21 15:15:01 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'E:\usr\sap\DEV\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 5372
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 5372) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Apr 21 15:15:02 2008
M DpShMCreate: sizeof(wp_adm) 8880 (1480)
M DpShMCreate: sizeof(tm_adm) 5584592 (27784)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F270050, size: 6264768)
M DpShMCreate: allocated sys_adm at 000000000F270050
M DpShMCreate: allocated wp_adm at 000000000F272150
M DpShMCreate: allocated tm_adm_list at 000000000F274400
M DpShMCreate: allocated tm_adm at 000000000F274460
M DpShMCreate: allocated wp_ca_adm at 000000000F7C7B30
M DpShMCreate: allocated appc_ca_adm at 000000000F7CD8F0
M DpShMCreate: allocated comm_adm at 000000000F7CF830
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F8564C0
M DpShMCreate: allocated gw_adm at 000000000F856540
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F856570
M DpShMCreate: allocated wall_adm at 000000000F856580
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host visu1
M
M Mon Apr 21 15:15:03 2008
M calling db_connect ...
C Prepending E:\usr\sap\DEV\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138620C0 00000000081DB600 00000000081DCE28
C Attaching to DB Server DEV (con_hdl=0,svchp=00000000081DCCE8,svrhp=0000000013881118)
C Starting user session (con_hdl=0,svchp=00000000081DCCE8,srvhp=0000000013881118,usrhp=00000000081DBE18)
C
C Mon Apr 21 15:15:04 2008
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 11295]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=00000000081DCCE8,usrhp=00000000081DBE18)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138620C0 00000000081DB600 00000000081DCE28
C Starting user session (con_hdl=0,svchp=00000000081DCCE8,srvhp=0000000013881118,usrhp=00000000081DBE18)
C Now 'SAPSR3/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance DEV is running on VISU1 with ORACLE version 10.2.0.1.0 since 20080421
B
B Mon Apr 21 15:15:05 2008
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20080421 151502 VISU1
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Apr 21 15:15:14 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000016100050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFF3290050, size: 61440000)
M SHM_PAGING_AREA (addr: 0000000016540050, size: 32768000)
M SHM_ROLL_ADM (addr: 000000000B1C0050, size: 615040)
M SHM_PAGING_ADM (addr: 000000000FE00050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000000FE90050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000FF20050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 6, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001D920160, size: 30000000, end: 000000001F5BC4E0)
B dbtbxbuf: Buffer TABLP (addr: 000000001F5C0160, size: 10240000, end: 000000001FF84160)
B dbexpbuf: Buffer EIBUF (addr: 000000001FF90170, size: 4194304, end: 0000000020390170)
B dbexpbuf: Buffer ESM (addr: 00000000203A0170, size: 4194304, end: 00000000207A0170)
B dbexpbuf: Buffer CUA (addr: 00000000207B0170, size: 3072000, end: 0000000020A9E170)
B dbexpbuf: Buffer OTR (addr: 0000000020AA0170, size: 4194304, end: 0000000020EA0170)
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
B
B Mon Apr 21 15:15:15 2008
B ***LOG BZA=> table APSRV does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B Didn't get a server group from table APSRV, rc = 32
B ***LOG BZA=> table TBTCO does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
L *** ERROR => BtcMrkZombies: db_rsql-call failed, rc: 32 [btcclean.c 572]
B
B Mon Apr 21 15:15:16 2008
B ***LOG BZA=> table USR41 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1160, total = 3064
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 000000000AF10050
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 000000000AF107C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 000000000AF10800
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 000000000AF1080C
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=E:\usr\sap\DEV\DVEBMGS00\sec, AS=visu1, instanceid=00)
B ***LOG BZA=> table SSF_PSE_H does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
N *** ERROR => SsfPseLoad: db_rsql94 - RS_FETCH on SSF_PSE_H failed with rc=32 [ssfxxpse.c 767]
N SsfPseLoad: ended (0 of 0 sucessfully loaded, 0 checked...
B ***LOG BZA=> table CVERS does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='CVERS'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table CVERS does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table T002C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table T002 does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='T002'}
[dbrsbuf.c 1784]
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
B ***LOG BZA=> table PATCHHIST does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for E:\usr\sap\DEV\DVEBMGS00\log\ALMTTREE.DAT (219 MTEs).
B
B Mon Apr 21 15:15:17 2008
B ***LOG BZA=> table TCP00 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
G Codepage converter switched to reinitialize state.
M ***LOG R19=> ThInit, rscpi_init ( codepages 000008) [thxxhead.c 1741]
M *** ERROR => .--============--
. [thxxhead.c 910]
M *** ERROR => | RSCP - Error | [thxxhead.c 910]
M *** ERROR => | Error from: Codepage handling (RSCP) | [thxxhead.c 910]
M *** ERROR => | code: 8 RSCPEIO Some I/O error. | [thxxhead.c 910]
M *** ERROR => | Codepage converter switched to reinitialize state. | [thxxhead.c 910]
M *** ERROR => | module: rscpmc no: 133 line: 1355 T100: TS004 | [thxxhead.c 910]
M *** ERROR => | TSL01: CQD | [thxxhead.c 910]
M *** ERROR => `----
' [thxxhead.c 910]
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000013A97C00
S
S Mon Apr 21 15:15:18 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002A1C00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002A1C02F0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: # fragments > # work processes => using less fragments
A System page size: 4kb, total admin_size: 5432kb, dir_size: 5404kb.
A Attached to PXA (address 000007FFF6D30050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
B ***LOG BZA=> table SRTM_ACT does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
A ***Error in abrtm.c: DB-Error 32 opening table SRTM_ACT.
A ABAP ShmAdm initialized (addr=000007FF4FF13000 leng=20955136 end=000007FF5130F000)
A >> Shm MMADM area (addr=000007FF503ECDB0 leng=244096 end=000007FF50428730)
A >> Shm MMDAT area (addr=000007FF50429000 leng=15622144 end=000007FF5130F000)
A RFC Destination> destination visu1_DEV_00 host visu1 system DEV systnr 0 (visu1_DEV_00)
A RFC Options> H=visu1,S=00,d=2,
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
B ***LOG BZA=> table RFCDES does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A RFC Destination> DB RC = 2
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
B ***LOG BZA=> table CVERS does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A *** ERROR => No hotpackage number found [abload3.c 14145]
B ***LOG BZA=> table CVERS1 does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='CVERS1'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table CVERS1 does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A *** ERROR => isSubReleaseActive: unexpected code from db_setget: 2 [abload3.c 13997]
M ThrCreateShObjects allocated 6352 bytes at 000000000FFD0050
M
M Mon Apr 21 15:15:19 2008
M ThVBStartUp: restart pending update requests
B ***LOG BZA=> table V_LNAMES does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B Couldn't read table V_LNAMES, rc = 32
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBMarkOldRq: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 12316]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBSearchEntries: db_rsql(RS_UPDATE) failed, rc: 32 [thxxvb.c 9908]
B ***LOG BZA=> table VBHDR does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
M *** ERROR => ThVBMark: db_rsql(RS_FETCH) failed, rc: 32 [thxxvb.c 4916]
N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\DEV\DVEBMGS00\sec): ok
N SsfSapSecin: PSE E:\usr\sap\DEV\DVEBMGS00\sec\SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is E:\usr\sap\DEV\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B ***LOG BZA=> table IACFL does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.111.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [14]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume visu1_DEV_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >visu1_DEV_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 21.04.2008 15:15:19 1208771119 / 4560
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 21.04.2008 15:15:19 1208771119 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 21.04.2008 15:15:19 1208771119 / 1
E Status: STATUS_OK
E -
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_update [rspogdio.c 424]
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_insert [rspogdio.c 424]
B ***LOG BZA=> table TSPSV does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSV, action rspogdio_read [rspogdio.c 424]
B ***LOG BZA=> table TSPSVI does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
S *** ERROR => -
> db_rtab Error 2, table TSPSVI, action rspogdio_read [rspogdio.c 424]
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <visu1_DEV_00 >
L BtcSysStartRaise: End
B
B Mon Apr 21 15:15:21 2008
B ***LOG BZA=> table TCP0C does not exist on database R/3 [dbtran#11 @ 7494] [dbtran 7494 ]
B *** ERROR => Buffer loading failed: {fcode=225, rc=32, cnt=0, table='TCP0C'}
[dbrsbuf.c 1784]
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Apr 21 15:15:22 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:22 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:22 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
S
S Mon Apr 21 15:15:23 2008
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:15:23 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
S
S Mon Apr 21 15:15:41 2008
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
S server @>SSRV:visu1_DEV_00@< appears or changes (state 1)
B
B Mon Apr 21 15:16:11 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:16:11 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B
B Mon Apr 21 15:16:21 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:16:21 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error DBIF_RTAB_ILLEGAL_CALL occured. P1=[RTAB/RD /TCP0C ] P2=TCP0C .
A
B
B Mon Apr 21 15:17:11 2008
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:17:11 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
B
B Mon Apr 21 15:17:21 2008
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 527] [dbsynseq0527 ]
B ***LOG BZY=> unexpected return code 2 calling sync_read [dbsync#4 @ 2176] [dbsync 2176 ]
B *** ERROR => collect_new : unexpected returncode 512
[dbsync.c 1222]
B ***LOG BZY=> unexpected return code 103 calling DbSlBegRea [dbsynseq#1 @ 426] [dbsynseq0426 ]
M *** ERROR => ThExeDdlog: db_clean_ddlog [thxxtool.c 1981]
B ***LOG BZA=> table TCP0C does not exist on database [dbtrtab#6 @ 3887] [dbtrtab 3887 ]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_C_STACK failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_RX_WRITE_SNAP completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Apr 21 15:17:21 2008
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code DBIF_RTAB_ILLEGAL_CALL.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function SetTextEnv Line 507.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed. -
hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!
That's definitely enough to start.
It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
It seems you're up to date with software. Post with your results. -
FSIS host controller service getting stopped frequently on windows 2008 machine
We have 6 Windows hosts out of which 1 is admin node for FSIS and other 5 have IMS instances running. Of late we observed that FSIS host controller service is getting stopped on many of these windows hosts almost every day and sometimes 5-6 times a day.
From the event viewer we could not find much errors except messaging saying FSIS host controller service got terminated unexpectedly. below are the message from one of the host controller service log. I have enabled debug mode today so waiting for debug logs
to give some more information
2013-01-29T20:07:55.3371746-08:00 Warning [11] WcfReplicationManager - Exception in replication handler, backing off for 300 seconds
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://srch-fsis-001-p.cisco.com:17001/ceres/hostcontroller/nettcp. The connection attempt lasted for a time span of 00:00:00.9961320. TCP error code 10061: No connection could be made because
the target machine actively refused it 72.163.42.208:17001.
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Ceres.HostController.WcfTypes.IRepositoryVersionManagement.GetRepositoryGuid()
at Microsoft.Ceres.HostController.WcfServer.WcfReplicationManager.get_PrimaryRepositoryGuid()
at Microsoft.Ceres.HostController.Repository.Replication.ReplicationManager.ReplicationHandler()
System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 72.163.42.208:17001
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
2013-01-30T07:55:05.1432766-08:00 Info [5] ServiceRunner - Starting host controller service
2013-01-30T07:55:05.1921066-08:00 Info [5] ServiceRunner - Machine Configuration:
Machine Name : SRCH-FSIS-006-P
Operating System : Microsoft Windows NT 6.1.7601 Service Pack 1
Runtime Version : v2.0.50727
2013-01-30T07:55:05.2057790-08:00 Info [5] ServiceRunner - Service Configuration:
Log Level : Info
Log Max FileSize : 1 GB
Log Max Log Volume : 100 GB
Log Retention Period : 40320 minutes
Log Rotate Daily : True
Log Rotate Hour of Day: 0
EventLog Source : FSIS Host Controller
EventLog Level : Info
Runtimes : C:\Program Files\FAST Search Server 2010 for Internet Sites\Runtime\
Repository Path : C:\Users\fsis.gen\AppData\Local\FSIS\Repository\
Replicated From : net.tcp://srch-fsis-001-p.cisco.com:17001/ceres/hostcontroller/nettcp
Node Path : C:\Users\fsis.gen\AppData\Local\FSIS\Nodes\
Node Port Allocation : Start = 17002, End = 17199, Block Size = 20
Node Memory Limit : Soft = 70%, Hard = 80% of installed physical memory
On Shutdown : Teminate all nodes
2013-01-30T07:55:05.4196544-08:00 Info [5] RepositoryManager - Initializing repository
2013-01-30T07:55:05.7399792-08:00 Info [5] RepositoryManager - Initializing repository journal
2013-01-30T07:55:05.9519014-08:00 Info [5] HostController - 16383 MB physical memory installed
2013-01-30T07:55:05.9538546-08:00 Info [5] HostController - 13106 MB physical memory available for nodes
2013-01-30T07:55:06.1716364-08:00 Info [5] ServiceRunner - Repository being replicated from the primary repository at net.tcp://srch-fsis-001-p.cisco.com:17001/ceres/hostcontroller/nettcp
2013-01-30T07:55:06.4118800-08:00 Info [5] ServiceRunner - Service available at
http://srch-fsis-006-p:17000/ceres/hostcontroller
2013-01-30T07:55:06.4128566-08:00 Info [5] ServiceRunner - Service available at net.tcp://srch-fsis-006-p:17001/ceres/hostcontroller
2013-01-30T07:55:06.4206694-08:00 Info [5] WcfReplicationManager - Replication manager started
2013-01-30T10:05:08.2641940-08:00 Warning [12] HostController - Failed to determine if the node running [System = Fsis, Node = InteractionEngineNode42]
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Ceres.HostController.Controller.RuntimeProxy.InvokeControllerMethod(String method, Object[] args)
at Microsoft.Ceres.HostController.Controller.RuntimeProxy.IsNodeOperating(String nodeRoot)
at Microsoft.Ceres.HostController.Controller.RuntimeProxy.IsNodeOperating(String nodeRoot)
at Microsoft.Ceres.HostController.Controller.HostController.IsNodeOperating(String systemName, String nodeName)
System.ArgumentException: A node is not deployed at C:\Users\fsis.gen\AppData\Local\FSIS\Nodes\Fsis\InteractionEngineNode42
at Microsoft.Ceres.CoreServices.Deployment.DeploymentController.ValidateDeployed(String nodeRoot)
at Microsoft.Ceres.CoreServices.Deployment.DeploymentController.IsNodeOperating(String nodeRoot)Hello,
The answer for this is in the error message:
2013-01-29T20:07:55.3371746-08:00 Warning [11] WcfReplicationManager - Exception in replication handler, backing off for 300 seconds
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://srch-fsis-001-p.cisco.com:17001/ceres/hostcontroller/nettcp. The connection attempt lasted for a time span of 00:00:00.9961320. TCP error code 10061:
No connection could be made because the target machine actively refused it 72.163.42.208:17001
Verify that you have connectivity from this server to server 72.163.42.208 in port 17001.
You can test this with telnet:
telnet 72.163.42.208 17001
You can check the documentation for the list of ports used by SharePoint @
http://technet.microsoft.com/en-us/library/cc262849.aspx
Cheers -
In ADDin JAVA upgrade , SAPJup is getting stopped after CHANGE_UME phase
Hi ,
We are upgrading our ECC 5.0 (ABAP + JAVA) to ERP2005 EHP4 SP level 5.
In the Downtime phase of the upgrade, SAP Jup is automatically getting stopped after CHANGE_UME phase. I am not able to find out the error. Why it is getting stopped even i started it many times, it goes to the CHANGE_UME phase then automatically stopped.
There is no error in CHANGE_UME_***_09.LOG file.
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[J:\DV2ERPUpgrade\jupgrade\log\CHANGE_UME_***_01.LOG]/>
<!PATTERN[CHANGE_UME_***_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5 #C000AC101E650000000003F25B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:758)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:758)#Java###Phase has been started.#1#UPGRADE/UPGRADE/CHANGE_UME#
#1.5 #C000AC101E650000000003F35B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:759)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:759)#Java###Phase type is .#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling#
#1.5 #C000AC101E650000000003F45B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java### Parameter =#2#connect#standard#
#1.5 #C000AC101E650000000003F55B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java### Parameter =#2#inputFile#UMEHandling.xml#
#1.5 #C000AC101E650000000003F65B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java### Parameter =#2#action#change#
#1.5 #C000AC101E650000000003F75B6DF84B00048B183E64FF88#1278836149125#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:233)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:233)#Java###Checking phase parameters .#1#action, connect, inputFile#
#1.5 #C000AC101E650000000003F85B6DF84B00048B183E64FF88#1278836149125#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:249)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:249)#Java###Phase parameters have been checked. All required phase parameters have been set.#1#3#
#1.5 #C000AC101E650000000003F95B6DF84B00048B183E6578A0#1278836149156#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.execute(PhaseTypeUMEHandling.java:169)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.execute(PhaseTypeUMEHandling.java:169)#Java###Backing up UME settings from configuration manager.##
#1.5 #C000AC101E650000000003FA5B6DF84B00048B183E6578A0#1278836149156#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Reading properties of service on node .#2#com.sap.security.core.ume.service#server#
#1.5 #C000AC101E650000000003FB5B6DF84B00048B183E66E7D0#1278836149250#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Batch config tool has been initialized.##
#1.5 #C000AC101E650000000004025B6DF84B00048B183EA4A868#1278836153297#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Reading properties of service on node .#2#com.sap.security.core.ume.service#ID8895050#
#1.5 #C000AC101E650000000004035B6DF84B00048B183EA4A868#1278836153297#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Batch config tool has been initialized.##
My ABAP upgrade is ruuning fine in the downtime phase.
Please suggest me ASAP.
Thanks,
ChetanHello - we are facing the exact same problem while uprading a dual stack system. How did you fix the problem? We also opened up a ticket to SAP and we are waiting to hear back from them. Any information you can share will be greatly appreciated.
Thank you.
Nameeta -
HyperionFinancialReportingWebApplication server sevice is getting stopped
Hi All,
I am using hyperion 11.1.1.1.0.0 .
When I am starting Hyperion Financial Reporting Web Application server service from the
services list it is showing started and after some time it is getting stopped by its own.
And even I am not getting the Oracle Reporting and Analysis option under Smart View Data Source Manager
tab inside Microsoft Office Word.I am using Microsoft office *2007*.
Cananyone tell me what is the reason for it?And how will I solve this problem?
Thanks
Edited by: user11358816 on Aug 3, 2009 11:42 PMHi,
If the service doesn't start properly then try starting it from the start menu > start > oracle epm system > Reporting & Analysis > Start Financial Reporting.
This way it will open a command window and should output any problems or you could try having a look at the logs
\Hyperion\logs\services\HyS9FRWeb-sysout.log
In word are you talking about the "Reporting & Analysis Document" is greyed out ? If so this will be greyed out until you make an Independent Provider connection to workspace.
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
Quantity Variance in Invoice Verification
Dear All I have a requirement where the system should display error in Invoice Verification if the quantity exceeds Goods Receipt quantity however there should be seperate treatment. ie.If the quantity variance upto 5 percent is allowed for raw mater
-
Youtube videos in windows 8.1 will not play
an error occurred I think many people will have seen this?
-
Half of my the music in itunes will not sync back to my iphone
Some of my music synced back to my iphone but not all .Some songs from the same album would load and others would not. There was a message that said "song not found" when it was right there in itunes. Only about half did load and itunes gave me a lis
-
Java Programming Language questions...???
Hi everybody.... Can I post here my questions about Java Programming Language....or only to to the relevant Sun's forum....http://forum.java.sun.com/index.jspa??? My greetings, Simon
-
Does adding RAM help solve iMovie4 jerky playback
I have been reading threads about jerky playback in iMovie4 in large projects, after adding music from iTunes etc. My wife has a monster project and playback during editing has became very eratic. I have emptied cache, repaired the hard drive, repair