Dispatcher is running server is not connected

hi,
we have installed ECC 6.0 version with abap stack first
afterwards i have installed java stack separately
after installation
all the three message server, dispatcher and IWS watchdog are up i.e (green in color)
but when i give the url parameter i.e Http:// .......
it's giving the error Dispatcher is running server is not connected
Searched in forums we have found that ,to the increase the heap size .
we have increased heap size and restarted the server
Again i am getting the same error when typed in browser

Hi Shravan,
can you please check the status of the Java Server & Dispatcher process by using jcmon, they should status "running".
Let me know if this is helpful and if you need some more details.
Regards
Prashanth

Similar Messages

Macbook running slow when not connected to charger

My Macbook Pro 13" is running slow when not connected to energy.
Does anyone know why is that happening, how can I fix it?
Thank you very much.
if you have any idea.
Att
Raissa
<Email Edited By Host>

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last. What h

I changed my server at the end of May & all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened & can I get email back to normal?

Hello Stern snapper
If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
-Norm G.

Solaris 9 server is not connecting to the network

hi,
we are working on a Sun Spark v240 ,Solaris 9 sever.
there was a ip clash between the server and other machine in the network.
Since then our server is not connecting to the network.
We disabled the ip on the other machine.
But still the problem persisits.
When we do trace route we are not getting any info.
It doenot even ping the default gateway.
please help

1, Could you provide some network layout info, eg: The network or subnet(provide subnet mask if using a subnet) address, The servers address, each other machines address.
2, Make sure you haven't disabled your hme?(ether) devices.
3, i know this is an old post, if you fixed the problem please reply your solution as it may help others troubleshoot similar problems.

Problem with my Mac running mountain lion not connecting to server

Hi there,
I have a problem connecting to the HDD shared on my local network. As far as I understand this might be a Mountain Lion (10.8.4) problem, because all my other devices can connect to it (even my iphone throught an app called FileExplorer).
I read that it might be related to a Samba problem, but I tried to install SMBUp and I still cannot connect to my HDD. Whenever I try to connect to it via the Cmd+K it says "The version of this server is not supported". Please help me this is blowing my mind. Also, it's a shame that everything but my main machine can connect to my HDD (PCs, Android, iOS are all fine).
Thanks in advance.

Sorry for the delay, but I've been quite busy in the recent period. Unfortunately, the solution you linked me doesn't seem to be working. Any other idea?
BTW: I've upgraded to Mavericks

Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

My imac running lion can not connect to a Windows PC on my network

My imac runing lion 10.7 can not connect to my Windows 7 pc on my network. When i select connect to server, I can see the windows computer but when i try to connect, i get the error message:
Connection failed. There was a problem connecting to the server. Ther server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection and try again.
I entered smb:// computer name and I tried smb://IP address. Neither would connect.
I am able to connect to the imac from my Window PC and access files but not I can not connect my iMac to the Windows PC.
I am trying to connect the two computers so that I can use a printer that is attached to the Windows 7 pc.
When I first downl;oaded and installed Lion, I was able to connect to the Windows 7 pc and use the printer attached to it.
I have tried 5 or 6 different suggestions to no avail. Both computers are up to date and the printer drivers are up to date.
Please let me know if there is a solution.

Be sure to make the network Workgroup name on the Mac and Windows boxes the same.
On the Mac it is in System Preferences, Network Preferences, Advanced, WINS
On the Windows machine check in the Control Panel where you will also find the Computer name listed. I don't have my PC running right now, so I am not sure exactly where it is. Only assign a Workgroup, do not create a Domain.
You can also search in Windows for Workgroup.
I can link/network Lion to Win7 and vice versa without any problems.

Server Admin not connecting to Leopard Server when accessing via VPN

Hi everyone,
Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

New member of ora_dba group on server can not connect as sysdba.

We have added a new dba to our staff and have made him a member of the local group Ora_dba on the server (9i windows). He can not connect as sysdba but a long-time dba can.
SQL> connect / @s1 as sysdba
ORA-01031: insufficient privileges
I know this is a very old Oracle challenge so I am sure someone can give us some guidance!
Thanks

1) Examine the contents of the file located at:
$ORACLE_HOME/rdbms/lib/config.c
This file lists the operating-system groups that have administrative access, notably the one listed in the line containing "SS_DBA_GROUP". Is t
he UNIX account you are using to connect / as sysdba a member of this OS group?
2) Examine the contents of the file located at:
$ORACLE_HOME/network/admin/sqlnet.ora
Within this file, the line containing the string "SQLNET.AUTHENTICATION_SERVICES" should either be commented out, or be set to SQLNET.AUTHENTICATION_SERVICES = (BEQ,NONE)
3) Check the value of $ORACLE_SID for the UNIX account(s) connecting / as sysdba to ensure it is correct.

2 AnyConnect queries backup server and not connecting.

We are in the process of swapping over from the old IPSEC VPN client to AnyConnect for remote users.
A couple of questions,
1) With the IPSEC VPN client you could configure a Backup server. with AnyConnect there is not an option for this as far as I can see. Is there an option for this anywhere?
2) Sometimes AnyConnect will not connect, I have found the way round this is to access an Internet website first, once that comes up then AnyConnect will come up ok. Is there something I can do about this such as timeout,script a website location to try first within Any Connect?

Hi,
You can add multiple backup servers by editing the profile xml file or by using the Anyconnet profile editor.
What version of the Anyconnect client are you using? How do you connect to the Internet? Are you connecting via a proxy?
Thanks
John

My laptop wont load firefox, it keeps saying my proxy server could not connect firefox. Why is this, it was working earlier.

Every time i try to open firefox my laptop tells me "The proxy server is refusing connection". This has never happened before. I updated my norton antivirus and firefox has not worked since.

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Everyday when I open Firefox a msg come on the screen that says "It is stronly recommended that you apply this update for Firefox ASAP." The connectivity server will not connect. Is there some way to disable this request?

Everyday when I open Firefox a msg comes on the screen that says "It is strongly recommended that you apply this update for Firefox ASAP. When I try to install, it will not connect to the connecting server so it just clocks forever.

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

When i get on my phone and and go to my mail it says that the server is not connected

When i get on my phone and go to email sign it says the server cannot be connected? Then when I enter for updates it goes back and forth to the icloud and apple id and arent they both the same?

where do i get answers?

Windows deployment server could not connect to Tecra S11-11f

Hello ,
When sending an image from the WDS to the Tecra i get an error message telling me that the wds could not connect to the tecra , because of a missing driver.
The driver we are using works fine when installing from an windows installation disk i detects the lancard and installs it.
I've downloaded a lot of drivers i can't find out which is the right one.
When connecting a different laptop from an other brand it works fine

Has your Tecra factory settings or you have installed and configured OS on your own?

Run app when NOT connected to a specific wifi hotspot

Hi.
I run Bittorrent Sync and love it. I don't want it to run when I'm connected to my mobile hotspot for obvious reasons.
How do I stop an application from running when I'm connected to a specific Wi-Fi hotspot?
Thanks

I apologize for the confusion. I should have stated my question such as:
Is there a way I can run a specific program when I connect to a specific wi-fi hotspot? Is there an Automator event or an OS event I can listen for and react upon when connecting to a wi-fi hotspot?

Dispatcher is running server is not connected

Similar Messages

Maybe you are looking for