Dispatcher Not Started in Upgrading to ECC 6.0

We are upgrading the system to 4.7 to ECC 6.0 while upgrading the system ,
1)We are taking back up of old prod Server (system copy) in New Dev Server.
2) hardware Configurations of New Dev Server is OS Windows Server 2003 ,32 .bit SQL 2000.
3)we are Upgrading the system to ECC 6.0 in New Dev Server. With the same hardware Configuration which I have Written in Point no2.
4we have format the server and install OS win server 2008 with 64 Bit.18 GB Ram Support.SQL 2005.
4when Format the Server ,and Copy the Data through Attach and Detach in New Dev Server,there was some Error displayed when reebot the server Dispatcher Stops.
5)Dispatcher Not Started.
Regards
Ritesh sharma
ABAP Consultant

Hi Ritesh,
Please check with Basis team on this.
Take the backup of production and physical copy of datafiles and transaction log file.
Now build the new system by system copy (detach/attach).(The platform should be same as production.)
Now you upgrade to your o/s to 2008 64 bit on the development server.Upgrade the mssql 32 bit to mssql2005 64 bit.Then convert the sap to 64 bit and then perform the upgrade to ecc6.
Format will not work.A basis person onsite will help.
Regards
Ashok Dalai

Similar Messages

Dispatcher not starting-- while upgrade

hi,
I am in the process of upgrading the SAP server.
it failes in MSCONCHECK.and it could not execute the program SETUSER '<SID>'
so i went in backend and gave some privilages and executed the program loggin in as <sid>adm..
But now after doing this when i start my SAP server, the dispatcher is nto starting.
Pls help me

trc file: "dev_disp", trc level: 1, release: "640"
Tue May 22 14:08:34 2007
kernel runs with dp version 134(ext=102) (@(#) DPLIB-INT-VERSION-134)
length of sys_adm_ext is 312 bytes
sysno 00
sid BW3
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 175
intno 20020600
make: multithreaded, ASCII
pid 2260
***LOG Q00=> DpSapEnvInit, DPStart (00 2260) [dpxxdisp.c 1102]
 shared lib "dw_xml.dll" version 175 successfully loaded
 shared lib "dw_xtc.dll" version 175 successfully loaded
 shared lib "dw_stl.dll" version 175 successfully loaded
 shared lib "dw_gui.dll" version 175 successfully loaded
 shared lib "dw_mdm.dll" version 175 successfully loaded
Tue May 22 14:08:38 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3896]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >hydhtc74451_BW3_00 <
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 044A0040, size: 2665456)
DpShMCreate: allocated sys_adm at 044A0040
DpShMCreate: allocated wp_adm at 044A17D8
DpShMCreate: allocated tm_adm_list at 044A31B8
DpShMCreate: allocated tm_adm at 044A31E0
DpShMCreate: allocated wp_ca_adm at 046E8220
DpShMCreate: allocated appc_ca_adm at 046EC870
DpShMCreate: allocated comm_adm_list at 046EDFE0
DpShMCreate: allocated comm_adm at 046EDFF8
DpShMCreate: allocated vmc_adm_list at 0471CDF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0471CE20
DpShMCreate: allocated wall_adm at 0471CE28
MBUF state OFF
Tue May 22 14:08:39 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1126 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( hydhtc74451) [dpxxdisp.c 10051]
DpStartStopMsg: send start message (myname is >hydhtc74451_BW3_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 175
Release check o.K.
Tue May 22 14:09:19 2007
ERROR => W0 (pid 2716) died [dpxxdisp.c 12577]
ERROR => W1 (pid 2456) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3880) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2748) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 144) died [dpxxdisp.c 12577]
ERROR => W5 (pid 3344) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3984) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 1032) died [dpxxdisp.c 12577]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2716 (SIGUSR2)
ERROR => DpWpKill(2716, SIGUSR2) failed [dpxxtool.c 2507]
killing W1-2456 (SIGUSR2)
ERROR => DpWpKill(2456, SIGUSR2) failed [dpxxtool.c 2507]
killing W2-3880 (SIGUSR2)
ERROR => DpWpKill(3880, SIGUSR2) failed [dpxxtool.c 2507]
killing W3-2748 (SIGUSR2)
ERROR => DpWpKill(2748, SIGUSR2) failed [dpxxtool.c 2507]
killing W4-144 (SIGUSR2)
ERROR => DpWpKill(144, SIGUSR2) failed [dpxxtool.c 2507]
killing W5-3344 (SIGUSR2)
ERROR => DpWpKill(3344, SIGUSR2) failed [dpxxtool.c 2507]
killing W6-3984 (SIGUSR2)
ERROR => DpWpKill(3984, SIGUSR2) failed [dpxxtool.c 2507]
killing W7-1032 (SIGUSR2)
ERROR => DpWpKill(1032, SIGUSR2) failed [dpxxtool.c 2507]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:29 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue May 22 08:39:29 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2716 Ended no 1 0 0
1 DIA 2456 Ended no 1 0 0
2 UPD 3880 Ended no 1 0 0
3 ENQ 2748 Ended no 1 0 0
4 BTC 144 Ended no 1 0 0
5 BTC 3344 Ended no 1 0 0
6 SPO 3984 Ended no 1 0 0
7 UP2 1032 Ended no 1 0 0
Dispatcher Queue Statistics Tue May 22 08:39:29 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue May 22 08:39:29 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue May 22 08:39:29 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:34 2007
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >hydhtc74451_BW3_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3220) (SOFT_KILL)
Stop icman
killing process (2236) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3220 HANDLE:1636)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:35 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3220 HANDLE:1636)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:36 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:37 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:38 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:39 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:40 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:41 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:42 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:43 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:44 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:2236 HANDLE:1640)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1657
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 22 14:09:45 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2236 HANDLE:1640)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >hydhtc74451_BW3_00 <)
NiIMyHostName: hostname = 'hydhtc74451'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiPRead: WSAEWOULDBLOCK 1.time 4
NiIPeek: peek for hdl 3 / socket 1596 timed out (r; 0)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: write 114, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: read 114, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=114
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER, typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiPRead: WSAEWOULDBLOCK 1.time 4
Tue May 22 14:09:46 2007
NiIPeek: peek for hdl 3 / socket 1596 timed out (r; 1000)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10308]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c 8766]
Good Bye .....

Dispatcher not starting up ::Shared library version mismatch

Hi,
System is SAP ECC 6.0, AIX and Oracle 10g.
We upgraded the Kernel Level from 201 to Level 221.
<hostname>/root$ su - <sid>adm
[YOU HAVE NEW MAIL]
.profile[30]: 1: not found.
<hostname>:sidadm> disp+work
disp+work information
kernel release 700
kernel make variant 700_REL
compiled on AIX 2 5 005DD9CD4C00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 23 2009 20:51:38
update level 0
patch number 221
source id 0.221
supported environment
database (SAP, table SVERS) 700
operating system
AIX 1 5
AIX 2 5
AIX 3 5
After upgrading the kernel dispatcher is not starting. Kindly find the below error:
sysno 10
sid SID
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 221
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 778402
Wed Nov 25 12:20:08 2009
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 778402) [dpxxdisp.c 1287]
DwSLCheckVersion: shared library version mismatch:
 shared lib "dw_xml.so" version 201 <-> kernel version 221
 shared lib "dw_xtc.so" version 201 <-> kernel version 221
 shared lib "dw_stl.so" version 201 <-> kernel version 221
 shared lib "dw_gui.so" version 201 <-> kernel version 221
 shared lib "dw_mdm.so" version 201 <-> kernel version 221
DP_FATAL_ERROR => Version mismatch of dw shared libraries detected. See dev_disp trace for details.
Set environment variable SAP_NO_SLIB_CHECK=1 to disable version checking.
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 25 12:20:13 2009
NiISelect: TIMEOUT occured (5000ms)
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) [dpxxdisp.c 10510]
Kindly look into the issue. Looking forward for your reply.
Thanks,
Soumya

Soumya Saha wrote:
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) http://dpxxdisp.c 10510
The system appears to think that the dispatcher process may already be running. Stop all the SAP processes and run cleanipc to clear out the shared memory. I've seen this on AIX before where the shared memory will prevent SAP from starting back up and clearing these resolved the issue.
Hope that is helpful.
J. Haynes

Dispatcher not starting "Loading: ThreadManager returned false! "

Hi,
The system was running fine for about two weeks and now the dispatcher will not start, we have upgraded the java server from windows 2003 to windows 7 and i did a system copy using the sapinst tool. This is a java only server using ABAP ume to connect.
Hers is the errors i am receiving:
SAP J2EE Engine Version 7.01 PatchLevel 75592. is starting...
Loading: LogManager ... 606 ms.
Loading: PoolManager ... 3 ms.
Loading: ThreadManager ...
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
I also get this error:
[Thr 6088] * LOCATION SAP-Gateway on host Current server / sapgw00
[Thr 6088] * ERROR hostname 'Old server' unknown
[Thr 6088] *
TIME Mon Apr 18 13:12:15 2011
[Thr 6088] * RELEASE 701
[Thr 6088] * COMPONENT NI (network interface)
[Thr 6088] * VERSION 38
[Thr 6088] * RC -2
[Thr 6088] * MODULE nixxhsl.cpp
[Thr 6088] * LINE 230
[Thr 6088] * DETAIL NiHsLGetNodeAddr: hostname cached as unknown
[Thr 6088] * COUNTER 8730
[Thr 6088] *
[Thr 6088] *****************************************************************************
Any help that would be great.
Thanks
JS

Dear Jean,
Hope you are doing good.
Not much investigation can be done with:
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
Just retrigger a server restart and then check the below logs. You will definitely find more information on the error:
/usr/sap/<SID>/work/ dev, std and jvm*
and
/usr/sap/<SID>/JC<nr>/j2ee/cluster/server0/logs/default trace (latest).
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Firefox will not start after upgrade from 3.0.1

I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I cannot open Firefox. It is not like the other "Will not start" problems, because in the Task Manager, firefox.exe pops up, then goes away instantly. I have tried using Safe Mode, doing a clean install by uninstalling Firefox and my profile, cleaning the registry, then using CCleaner, then trying to reinstall, but the problem persists. Sometimes firefox.exe doesn't even show up in the Task Manager. I also cannot use any version of IE(even if I wanted to), Safari or Chrome. They all have the same results. I suspect that it is not a problem with Firefox, but with my computer, but I don't what is wrong. Can anyone help me?
== This happened ==
Every time Firefox opened
== I upgraded from 3.0.1

Sounds like something is killing off your browsers before they can start. I really have no idea why Firefox 3.0.1 is working somehow, though.
Do a malware check with a few different programs, you need to use all, because not all programs detect the same malware.
For each of these, make sure they are updated after installing, and run a full scan.
http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
http://www.superantispyware.com/ - SuperAntispyware
http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

Firefox 4 will not start after upgrade to OS X 10.6.7 (from 10.6.6)

Was running FF 4.0RC1 successfully on OS X 10.6.6. Upgraded to 10.6.7 and FF would not start; had to force quit. Upgraded to FF 4.0RC2 and then 4.0; same thing is occurring. Reverted to FF 3.6 and it works fine under 10.6.7. Installed full upgrade of 10.6.7 to try to fix this; same problem: 4.0 will not start. Tried trashing Firefox application and restoring anew; same problem.

Since your other Mac running 10.5.8 is not affected, you know that your AirPort router is functioning correctly.
What changed on your Mac? This seems like a post for either the Mac OS X v10.6 Snow Leopard support area, or the support area for your model of Mac.
We normally handle questions about the AirPort Express, AirPort Extreme or Time Capsule in this area, but you can certainly wait to see if you receive a response here.

SAP R/3 Installation : Dispatcher not starting up.

Hi,
 I'm trying to Install SAP R/3 Enterprise ABAP on Windows: Oracle. Central Instance, Database Instance & Gateway Instance Installation went smoothly without any problems.
 But when I tried to start the SAP system the Dispatcher is not starting.
 I'm getting following error which is listed below from various files like dev_wx, dev_ms, stderrx & dev_rfc.
dev_rfc.trc file
>TS> Fri Jun 03 14:02:41 2005
T:5268 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.C01, GWHOST=wipro, GWSERV=3300
ERROR partner not reached (host 10.119.2.66, service 3300)
TIME Fri Jun 03 14:02:41 2005
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
dev_ms file
[Thr 5884] Fri Jun 03 17:51:27 2005
[Thr 5884] systemid 560 (PC with Windows NT)
[Thr 5884] relno 6400
[Thr 5884] patchlevel 0
[Thr 5884] patchno 12
[Thr 5884] intno 20020600
[Thr 5884] pid 5816
[Thr 5884] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5816) [msxxserv.c 1655]
[Thr 5884] MsHttpInit: full qualified hostname = wipro.hobbits
[Thr 5884] HTTP logging is switch off
[Thr 5884] set HTTP state to LISTEN
[Thr 5884] MsHttpOwnDomain: own domain[1] = hobbits
[Thr 5884] *** I listen to port sapmsC01 (3601) ***
[Thr 5884] *** HTTP port 8101 state LISTEN ***
[Thr 5884] CUSTOMER KEY: >P1811225457<
[Thr 5884] Fri Jun 03 17:51:47 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:44 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_01 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:49 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 5884] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9101]
[Thr 5884] *** ERROR => MsSClientHandle: MsSRead C2 (wipro_C01_00), MSEINTERN [msxxserv.c 3765]
[Thr 5884] Fri Jun 03 18:03:09 2005
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C1 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C0 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
stderr file
stderr2 file
C:\usr\sap\C01\D00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\C01\D00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo startup 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo exit 1>>v9start.sql
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Jun 3 17:51:27 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
stderr4
work process W0 died => tskh_init: db_connect
work process W3 died => tskh_init: db_connect
work process W4 died => tskh_init: db_connect
work process W5 died => tskh_init: db_connect
work process W6 died => tskh_init: db_connect
work process W7 died => tskh_init: db_connect
work process W2 died => tskh_init: db_connect
work process W1 died => tskh_init: db_connect
ICM up and operational (pid: 4100) ***
Shutdown ICM server ......
ICM shutdown completed (pid: 4100) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
stderr6
[Thr 3668] Fri Jun 03 17:51:27 2005
[Thr 3668] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3668] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 4144] Fri Jun 03 17:51:28 2005
[Thr 4144] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 4144] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 3680] Fri Jun 03 17:51:28 2005
[Thr 3680] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3680] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604]
 From the above log, it says that there is problem in database connection. But I am not able to figure out where the problem lies & what are the changes that needs to be done.
 Kindly suggest me what needs to be done.
Cheers,
Jeetu

Hi Jeetendra
I have the same problem of dsipatcher not starting up, i am using XP as operating system , pinning hope that u have got the solutions for the problem
Here are the below
1)dev_wo
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 19 09:23:41 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:42 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3660
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3660) [dpxxdisp.c 1016]
I
I Wed Oct 19 09:23:43 2005
I MtxInit: -2 0 0
X
X Wed Oct 19 09:23:44 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 19 09:23:50 2005
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:55 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 19 09:23:55 2005
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3660) [dpnttool.c 345]
2)stder
C:\usr\sap\PRD\DVEBMGS00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo startup 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo exit 1>>v9start.sql
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.
3)dev_rfc
ERROR file opened at 20060207 010848 India Standard , SAP-REL 620,0,252 RFC-VER 3 500897 MT-SL
T:2608 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1360
T:2608 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4)dev_ms
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 2316] Wed Oct 19 09:23:36 2005
[Thr 2316] MsSSetTrcLog: trc logging not active
[Thr 2316] relno 6200
[Thr 2316] patchlevel 0
[Thr 2316] patchno 125
[Thr 2316] intno 20020600
[Thr 2316] pid 2328
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2328) [msxxserv.c 1515]
[Thr 2316] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 2316] *** I listen to port sapmsPRD (3600) ***
[Thr 2316] *** HTTP LISTEN ***
[Thr 2316] *** I listen to HTTP port 8100 ***
[Thr 2316] CUSTOMER KEY: >B0642345523<
[Thr 2316] Wed Oct 19 09:24:27 2005
[Thr 2316] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sap_PRD_00 [msxxserv.c 3957]
[Thr 2492] Wed Oct 19 09:27:02 2005
[Thr 2492] MsSExit: received SIGINT (2)
[Thr 2492] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2328) [msxxserv.c 4786]
5) dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Wed Oct 19 09:23:38 2005
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 2120
***LOG Q00=> DpSapEnvInit, DPStart (00 2120) [dpxxdisp.c 966]
 shared lib "dw_xml.dll" version 252 successfully loaded
 shared lib "dw_xtc.dll" version 252 successfully loaded
 shared lib "dw_stl.dll" version 252 successfully loaded
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 268 MB
<ES> 267 blocks reserved for free list.
ES initialized.
Wed Oct 19 09:23:39 2005
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 8832]
Wed Oct 19 09:23:40 2005
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Wed Oct 19 09:23:42 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Oct 19 09:24:21 2005
ERROR => W0 (pid 3660) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3728) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3716) died [dpxxdisp.c 11210]
ERROR => W3 (pid 4048) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3704) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3700) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3684) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3692) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3896) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3672) died [dpxxdisp.c 11210]
ERROR => W10 (pid 2620) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3628) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3620) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3612) died [dpxxdisp.c 11210]
ERROR => W15 (pid 380) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3624) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Wed Oct 19 09:24:27 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
Wed Oct 19 09:24:28 2005
***LOG Q05=> DpHalt, DPStop ( 2120) [dpxxdisp.c 7637]
kindly help me to solve and able to connect to server
and please let me know step by step solutions as i am very much new
Thanking you my emial id ([email protected])

Firefox will not start after upgrade: error code 2324

I upgraded Firefox on my workstation running Windows 7 Enterprise (64-bit). The stub installer downloads and runs through the installation, but does not start Firefox automatically. If I click on the link in the taskbar, nothing happens. Same with the one pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "The installer encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!
Please report back to see if this helped you!
Thank you.

Win 2003 Oracle 10.2.0.1 to 10.2.0.3 - Oracle will not start after upgrade

I have been running Oracle 10.2.0.1 on Windows Server 2003 and I ran the patch set to upgrade to 10.2.0.3. After running the patch I rebooted and now I cannot start Oracle. I get the following error running the startup command:
H:\>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Aug 20 15:10:37 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 209715200 bytes
Fixed Size 1289748 bytes
Variable Size 125829612 bytes
Database Buffers 79691776 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
I found the following message in clsc.log. I don't know if it applies or not:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2008-08-20 14:52:29.043: [ OCROSD][1348]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
2008-08-20 14:52:29.043: [ OCRRAW][1348]proprinit: Could not open raw device
2008-08-20 14:52:29.043: [ default][1348]a_init:7!: Backend init unsuccessful : [33]
2008-08-20 14:52:29.043: [ CSSCLNT][1348]clsssinit: error(33 ) in OCR initialization
Any thoughts as to what is going on?
Thanks in advance.
Brian

I think that you may have hit on it. It looks like the DB was not upgraded.
I just ran the patch set package p5337014_10203_WINNT. I assumed that it upgraded both the binaries and DB (if needed). In the alert file I had the following:
ORA-39700: database must be opened with UPGRADE option
Why it couldn't just show that on the screen is beyond me. :)
I found the following steps and it seems to have worked. Thanks for your help!
1. start a new sqlplus session
2. fire the following command on sqlplus
STARTUP UPGRADE
3. The database now opens successfully after which catalog and cataproc
sql's can be fired.
4. Now shutdown and startup the database as the database was started
with UPGRADE option.
pupbld sql can be executed after step 4.

Screensaver does not start after upgrading to 10.7

Since upgrading to 10.7 my screensaver does not start either by hot corner or automatically. I can get it to test from the preference pane, any suggestions?

Okay.... Sorry for calling the technology airplay vice AirPrint. I have done all the standard power reset and wireless tips (i.e.delete the wireless network, re-add the wireless network, even monitored the RF frequency spectrum to make sure nobody is stomping on my wireless signal, solid 32Mbits over a Cisco 1811w). I have over 28 years in networking experience. So, I assume you all the basic stuff has been covered. Before our Apple devices got upgraded to IOS7 (2 IPads and 2 iPhones), we had no problems printing to our Brother HL-5450DN series printer (updated to the latest firmware). I strongly believe it has something to do with the AirPrint discovery process as shared in my last post. My next step is to enable port mirroring and monitor the packet exchange using wireshark or tcpdump. This will probably have to wait until the weekend.

Work processes died and dispatcher not starting

Any idea on the following error causing dispatcher not to start?
The following excerpt is taken from the trace log.
Any clue would be very helpful. Thanks.
Mon Mar 03 11:44:02 2008
CCMS: start to initalize 3.X shared alert area (first segment).
ERROR => DpHdlDeadWp: W0 (pid 1452) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W1 (pid 528) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W2 (pid 3532) died [dpxxdisp.c   14507]
Mon Mar 03 11:44:03 2008
ERROR => DpHdlDeadWp: W3 (pid 3956) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W4 (pid 3056) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W5 (pid 2104) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W6 (pid 568) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W7 (pid 3820) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W8 (pid 3092) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W9 (pid 2568) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 2812) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 3208) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W13 (pid 2316) died [dpxxdisp.c   14507]
ERROR => DpHdlDeadWp: W14 (pid 3644) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 3896) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 2756) died [dpxxdisp.c   14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***

Hi,
Upon restarting the host system I found the application server to be running normal.
I am not sure if there were any pending configuration requiring the host system to be restarted and causing the dispatcher not to become operational.
Thanks a lot for your response though.
If I get the error again, I would surely paste both the logs here in my question.
Best Regards,
OI

J2EE engine Dispatcher not starting

I installed Developer Workplace 2004s SR2 (Java) on MS SQL server, in Windows XP Professional. It worked fine and I was able to start the engine. When I patched it to SP10 , dispatcher is not starting and it is greyed out. All the log files has no errors reported except one file which has an error message logged in work/jvm_dispatcher.log. Here is the message:
Error - ID:000000. Error in loading com.sap.engine.core.Framework class. Class not found.
Any Clue

Are all SCA needed for SP10 deployed successfully?
I think some sca files were not properly deployed...

SAPNW2004sABAPTrialSP11 ....... Dispatcher not starting

Hi!
please help me....
i have installed SAP NW 2004s ABAP Trial SP11 completely without any error,,
but my Dispatcher(disp+work.exe) is not starting ,, only Message server is starting
initially it gives me a error message ' Running but message server unreachable' in status in process list in SAPMMC
and after the error message it stops,,

hi..
i am getting a similiar erro
this is my sap mmc developer trace
===============
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2316] Wed Jun 06 19:40:33 2007
[Thr 2316] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    79
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2500
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2500) [msxxserv.c   1824]
[Thr 2316] ***LOG Q0I=> NiPGetServByName2: service 'sapmsDEV' not found: getservbyname_r [ninti.c 530]
[Thr 2316] *** ERROR => MsSCommInit: NiBufListen(sapmsDEV) (rc=NIESERV_UNKNOWN) [msxxserv.c   10118]
[Thr 2316] *** ERROR => MsSInit: MsSCommInit [msxxserv.c   1857]
[Thr 2316] *** ERROR => main: MsSInit [msxxserv.c   5890]
[Thr 2316] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2500) [msxxserv.c   5938]
============
i checked the services file..
the entry there is correct as per sap note
===============
db2c_DB2     50000/tcp
db2c_DB2CTLSV     50001/tcp
sapmsDEV     3605/tcp          # SAP System Messaging Service Port
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
and so on till
sapmsSOL     3600/tcp     # SAP System Messaging Service Port
sapdb2DEV     6001/tcp     # SAP DB2 Communication Port
-==
any help much appreciatedc
badly stuck
need to up server anyhow by tommrow
full points guranteed

IPC Dispatcher not starting

Hi All,
The SAP IPC dispatcher and the SAP IPC Server are not starting. Message: "Couldn't start the SAP IPC Dispatcher service on local computer. The service didn't return an error. This could be an internal windows error or an internal service error. "
Environment:
1. Windows 2000 Server Service Pack 4.
2. SAP:IPC:4.0 SP06
Here are contents of properties file
rfcEnabled=true
rfcDispatcherProgId=IPC_RFC_DISPATCHER
rfcServerCount=1
rfcServerProgIdPrefix=IPC_RFC_SERVER_
I searched OSS notes and this forum, but didn't have good luck.
Looking forward to your help.
CRM Installer

Did you try note 842950?
Regards,
Kaushal

Dispatcher not starting, inconsistencies with database.

Hi guys,
In my coy a member of staff shutdown the SAP Server abnormally causing inconsistencies in the database. The SAP system runs on an MSSQL database.
The next morning the dispatcher was not starting and i checked the database. Apparently, i could not login to the database so i changed the default database to master. I could login alright so i tried running the ALTER LOGIN.... which did not run.
Drilling down i found out that the database was marked "SUSPECT" so i tried to take it offline and detach it. I got the error "attempt to retrieve data for object failed for server".
I would appreciate your prompt response on this.
Regards
Basisman.

you may also want to check:
[http://deepakrangarajan.blogspot.com/2007/08/how-to-recover-from-suspect-database.html]
http://www.sqlservercentral.com/Forums/Topic399609-266-1.aspx

Dispatcher Not Started in Upgrading to ECC 6.0

Similar Messages

Maybe you are looking for