Dispatcher not starting, inconsistencies with database.

Hi guys,
In my coy a member of staff shutdown the SAP Server abnormally causing inconsistencies in the database. The SAP system runs on an MSSQL database.
The next morning the dispatcher was not starting and i checked the database. Apparently, i could not login to the database so i changed the default database to master. I could login alright so i tried running the ALTER LOGIN.... which did not run.
Drilling down i found out that the database was marked "SUSPECT" so i tried to take it offline and detach it. I got the error "attempt to retrieve data for object failed for server".
I would appreciate your prompt response on this.
Regards
Basisman.

you may also want to check:
[http://deepakrangarajan.blogspot.com/2007/08/how-to-recover-from-suspect-database.html]
http://www.sqlservercentral.com/Forums/Topic399609-266-1.aspx

Similar Messages

Dispatcher Not Started in Upgrading to ECC 6.0

We are upgrading the system to 4.7 to ECC 6.0 while upgrading the system ,
1)We are taking back up of old prod Server (system copy) in New Dev Server.
2) hardware Configurations of New Dev Server is OS Windows Server 2003 ,32 .bit SQL 2000.
3)we are Upgrading the system to ECC 6.0 in New Dev Server. With the same hardware Configuration which I have Written in Point no2.
4we have format the server and install OS win server 2008 with 64 Bit.18 GB Ram Support.SQL 2005.
4when Format the Server ,and Copy the Data through Attach and Detach in New Dev Server,there was some Error displayed when reebot the server Dispatcher Stops.
5)Dispatcher Not Started.
Regards
Ritesh sharma
ABAP Consultant

Hi Ritesh,
Please check with Basis team on this.
Take the backup of production and physical copy of datafiles and transaction log file.
Now build the new system by system copy (detach/attach).(The platform should be same as production.)
Now you upgrade to your o/s to 2008 64 bit on the development server.Upgrade the mssql 32 bit to mssql2005 64 bit.Then convert the sap to 64 bit and then perform the upgrade to ecc6.
Format will not work.A basis person onsite will help.
Regards
Ashok Dalai

Does not start up with last viewed Tabs even though chosen in options?

V 4.01 with Vista. Even after choosing the correct option in options>options>General FF does not start up with the last session of Tabs and Windows. It always opens with a single blank Tab. What am I doing wrong?

Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

Lotto.nl will not starts, only with MS explorer

lotto.nl will not start, only with microsoft explorer on my laptop asus x 51 series

Dear Smith_123:
Thank you for your reply. However, Office had never been previously on the OS as it was never purchased. I do have Office for Mac 2011 but that is 32 bit and is not on the VMWare / Windows side of the machine. But even if I had, I would not know
how to clean up the residual file or registry keys without assistance.
After 1 hours and 20 min on the phone last evening and being handed from person to person through literally 9 different people, I finally reached someone that seemed knowledgeable in MS Support. But all they would give me was a circular answer:
We can't help you because it is a Trial Version for which there is no support offered. When I explained I wanted to be sure Visio worked on my machine prior to spending between $300 and $600 on a copy, Support could only say that I would have to purchase it
first before they would give me any help to see if it works. When I offered to purchase it right then since I had finally gotten to someone who appeared as though they could help, he told me that he was Support and not Sales so I would have to go elsewhere
to purchase the product. Very frustrating.

T400 does not start up with a battery and AC, but starts up with only AC.

I bought T400, 7417-CTO in Jan 2010. My T400 does not start up with a battery and AC power. I tried to start with only AC power after pulling out the battery, it worked fine. Even when I inserted the battery in T400, which was running perfectly with AC only, T400 seems to lose the power - more strictly speaking, it kept stoping and re-running several times, and finally it dead.
a few possibilities
1) a battery is dead - but it does not explain the failure with both AC and battery
2) some hibernation issue - I plugged in and out the DIMM, and clock battery. I tried to keep pushing the power button trick, but it didn't work
3) Mother board failure??
I really appreciate if you give me some advice on it.
Wanyong

Thanks for all your kind and helpful comments.
Unfortunately, I don't have any friends who have Lenovo - or I don't have many friends here since I moved in the last summer. ;-)
After purchasing a new battery, I will update it. Hope that this thread helps someone who had/will have same prob. as mine.
-WS

Why does plugin-container.exe not start up with Firefox 3.6.15 anymore?

I have Firefox 3.6.15, Firefox 4.0 RC1 and Pale Moon 3.6.15 on my PC. Even though each .exe file is in a separate folder, if I start up say, Firefox 4.0 RC1 for awhile and then close it and start up Firefox 3.6.15 my settings are messed up and I have to fix some of them. I just noticed in Task Manager that plugin-container.exe does not start up with FF 3.6.15 and FF 4.0 RC1 and Pale Moon 3.6.15 anymore. I'm not sure what I did to cause this. I even went into Mozilla's folder and tried to start up plugin-container manually, but it does not start up. I'm at a loss, do I have to do a clean install of three browsers to fix this?

It is caused by Firefox asking plugins like Flash to remove their cookies and other locally stored data.
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

How I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

how I can unlock an encryption on my macbook pro ? device is not starting only with sos sound & black screen I don't know what should do ?

You have to take the computer to the Apple store.
http://support.apple.com/kb/HT4790
Best.

SAP R/3 Installation : Dispatcher not starting up.

Hi,
 I'm trying to Install SAP R/3 Enterprise ABAP on Windows: Oracle. Central Instance, Database Instance & Gateway Instance Installation went smoothly without any problems.
 But when I tried to start the SAP system the Dispatcher is not starting.
 I'm getting following error which is listed below from various files like dev_wx, dev_ms, stderrx & dev_rfc.
dev_rfc.trc file
>TS> Fri Jun 03 14:02:41 2005
T:5268 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.C01, GWHOST=wipro, GWSERV=3300
ERROR partner not reached (host 10.119.2.66, service 3300)
TIME Fri Jun 03 14:02:41 2005
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
dev_ms file
[Thr 5884] Fri Jun 03 17:51:27 2005
[Thr 5884] systemid 560 (PC with Windows NT)
[Thr 5884] relno 6400
[Thr 5884] patchlevel 0
[Thr 5884] patchno 12
[Thr 5884] intno 20020600
[Thr 5884] pid 5816
[Thr 5884] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5816) [msxxserv.c 1655]
[Thr 5884] MsHttpInit: full qualified hostname = wipro.hobbits
[Thr 5884] HTTP logging is switch off
[Thr 5884] set HTTP state to LISTEN
[Thr 5884] MsHttpOwnDomain: own domain[1] = hobbits
[Thr 5884] *** I listen to port sapmsC01 (3601) ***
[Thr 5884] *** HTTP port 8101 state LISTEN ***
[Thr 5884] CUSTOMER KEY: >P1811225457<
[Thr 5884] Fri Jun 03 17:51:47 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:44 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_01 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:49 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 5884] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9101]
[Thr 5884] *** ERROR => MsSClientHandle: MsSRead C2 (wipro_C01_00), MSEINTERN [msxxserv.c 3765]
[Thr 5884] Fri Jun 03 18:03:09 2005
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C1 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C0 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
stderr file
stderr2 file
C:\usr\sap\C01\D00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\C01\D00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo startup 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo exit 1>>v9start.sql
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Jun 3 17:51:27 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
stderr4
work process W0 died => tskh_init: db_connect
work process W3 died => tskh_init: db_connect
work process W4 died => tskh_init: db_connect
work process W5 died => tskh_init: db_connect
work process W6 died => tskh_init: db_connect
work process W7 died => tskh_init: db_connect
work process W2 died => tskh_init: db_connect
work process W1 died => tskh_init: db_connect
ICM up and operational (pid: 4100) ***
Shutdown ICM server ......
ICM shutdown completed (pid: 4100) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
stderr6
[Thr 3668] Fri Jun 03 17:51:27 2005
[Thr 3668] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3668] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 4144] Fri Jun 03 17:51:28 2005
[Thr 4144] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 4144] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 3680] Fri Jun 03 17:51:28 2005
[Thr 3680] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3680] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604]
 From the above log, it says that there is problem in database connection. But I am not able to figure out where the problem lies & what are the changes that needs to be done.
 Kindly suggest me what needs to be done.
Cheers,
Jeetu

Hi Jeetendra
I have the same problem of dsipatcher not starting up, i am using XP as operating system , pinning hope that u have got the solutions for the problem
Here are the below
1)dev_wo
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 19 09:23:41 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:42 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3660
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3660) [dpxxdisp.c 1016]
I
I Wed Oct 19 09:23:43 2005
I MtxInit: -2 0 0
X
X Wed Oct 19 09:23:44 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 19 09:23:50 2005
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:55 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 19 09:23:55 2005
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3660) [dpnttool.c 345]
2)stder
C:\usr\sap\PRD\DVEBMGS00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo startup 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo exit 1>>v9start.sql
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.
3)dev_rfc
ERROR file opened at 20060207 010848 India Standard , SAP-REL 620,0,252 RFC-VER 3 500897 MT-SL
T:2608 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1360
T:2608 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4)dev_ms
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 2316] Wed Oct 19 09:23:36 2005
[Thr 2316] MsSSetTrcLog: trc logging not active
[Thr 2316] relno 6200
[Thr 2316] patchlevel 0
[Thr 2316] patchno 125
[Thr 2316] intno 20020600
[Thr 2316] pid 2328
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2328) [msxxserv.c 1515]
[Thr 2316] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 2316] *** I listen to port sapmsPRD (3600) ***
[Thr 2316] *** HTTP LISTEN ***
[Thr 2316] *** I listen to HTTP port 8100 ***
[Thr 2316] CUSTOMER KEY: >B0642345523<
[Thr 2316] Wed Oct 19 09:24:27 2005
[Thr 2316] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sap_PRD_00 [msxxserv.c 3957]
[Thr 2492] Wed Oct 19 09:27:02 2005
[Thr 2492] MsSExit: received SIGINT (2)
[Thr 2492] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2328) [msxxserv.c 4786]
5) dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Wed Oct 19 09:23:38 2005
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 2120
***LOG Q00=> DpSapEnvInit, DPStart (00 2120) [dpxxdisp.c 966]
 shared lib "dw_xml.dll" version 252 successfully loaded
 shared lib "dw_xtc.dll" version 252 successfully loaded
 shared lib "dw_stl.dll" version 252 successfully loaded
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 268 MB
<ES> 267 blocks reserved for free list.
ES initialized.
Wed Oct 19 09:23:39 2005
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 8832]
Wed Oct 19 09:23:40 2005
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Wed Oct 19 09:23:42 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Oct 19 09:24:21 2005
ERROR => W0 (pid 3660) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3728) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3716) died [dpxxdisp.c 11210]
ERROR => W3 (pid 4048) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3704) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3700) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3684) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3692) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3896) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3672) died [dpxxdisp.c 11210]
ERROR => W10 (pid 2620) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3628) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3620) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3612) died [dpxxdisp.c 11210]
ERROR => W15 (pid 380) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3624) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Wed Oct 19 09:24:27 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
Wed Oct 19 09:24:28 2005
***LOG Q05=> DpHalt, DPStop ( 2120) [dpxxdisp.c 7637]
kindly help me to solve and able to connect to server
and please let me know step by step solutions as i am very much new
Thanking you my emial id ([email protected])

Dispatcher not starting up ::Shared library version mismatch

Hi,
System is SAP ECC 6.0, AIX and Oracle 10g.
We upgraded the Kernel Level from 201 to Level 221.
<hostname>/root$ su - <sid>adm
[YOU HAVE NEW MAIL]
.profile[30]: 1: not found.
<hostname>:sidadm> disp+work
disp+work information
kernel release 700
kernel make variant 700_REL
compiled on AIX 2 5 005DD9CD4C00
compiled for 64 BIT
compilation mode UNICODE
compile time Aug 23 2009 20:51:38
update level 0
patch number 221
source id 0.221
supported environment
database (SAP, table SVERS) 700
operating system
AIX 1 5
AIX 2 5
AIX 3 5
After upgrading the kernel dispatcher is not starting. Kindly find the below error:
sysno 10
sid SID
systemid 324 (IBM RS/6000 with AIX)
relno 7000
patchlevel 0
patchno 221
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 778402
Wed Nov 25 12:20:08 2009
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 778402) [dpxxdisp.c 1287]
DwSLCheckVersion: shared library version mismatch:
 shared lib "dw_xml.so" version 201 <-> kernel version 221
 shared lib "dw_xtc.so" version 201 <-> kernel version 221
 shared lib "dw_stl.so" version 201 <-> kernel version 221
 shared lib "dw_gui.so" version 201 <-> kernel version 221
 shared lib "dw_mdm.so" version 201 <-> kernel version 221
DP_FATAL_ERROR => Version mismatch of dw shared libraries detected. See dev_disp trace for details.
Set environment variable SAP_NO_SLIB_CHECK=1 to disable version checking.
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 25 12:20:13 2009
NiISelect: TIMEOUT occured (5000ms)
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) [dpxxdisp.c 10510]
Kindly look into the issue. Looking forward for your reply.
Thanks,
Soumya

Soumya Saha wrote:
ERROR => DpHalt: my PID is not the dispatcher's (778402/0) http://dpxxdisp.c 10510
The system appears to think that the dispatcher process may already be running. Stop all the SAP processes and run cleanipc to clear out the shared memory. I've seen this on AIX before where the shared memory will prevent SAP from starting back up and clearing these resolved the issue.
Hope that is helpful.
J. Haynes

SAPNW2004sABAPTrialSP11 ....... Dispatcher not starting

Hi!
please help me....
i have installed SAP NW 2004s ABAP Trial SP11 completely without any error,,
but my Dispatcher(disp+work.exe) is not starting ,, only Message server is starting
initially it gives me a error message ' Running but message server unreachable' in status in process list in SAPMMC
and after the error message it stops,,

hi..
i am getting a similiar erro
this is my sap mmc developer trace
===============
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2316] Wed Jun 06 19:40:33 2007
[Thr 2316] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    79
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        2500
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2500) [msxxserv.c   1824]
[Thr 2316] ***LOG Q0I=> NiPGetServByName2: service 'sapmsDEV' not found: getservbyname_r [ninti.c 530]
[Thr 2316] *** ERROR => MsSCommInit: NiBufListen(sapmsDEV) (rc=NIESERV_UNKNOWN) [msxxserv.c   10118]
[Thr 2316] *** ERROR => MsSInit: MsSCommInit [msxxserv.c   1857]
[Thr 2316] *** ERROR => main: MsSInit [msxxserv.c   5890]
[Thr 2316] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2500) [msxxserv.c   5938]
============
i checked the services file..
the entry there is correct as per sap note
===============
db2c_DB2     50000/tcp
db2c_DB2CTLSV     50001/tcp
sapmsDEV     3605/tcp          # SAP System Messaging Service Port
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
and so on till
sapmsSOL     3600/tcp     # SAP System Messaging Service Port
sapdb2DEV     6001/tcp     # SAP DB2 Communication Port
-==
any help much appreciatedc
badly stuck
need to up server anyhow by tommrow
full points guranteed

Dispatcher not starting "Loading: ThreadManager returned false! "

Hi,
The system was running fine for about two weeks and now the dispatcher will not start, we have upgraded the java server from windows 2003 to windows 7 and i did a system copy using the sapinst tool. This is a java only server using ABAP ume to connect.
Hers is the errors i am receiving:
SAP J2EE Engine Version 7.01 PatchLevel 75592. is starting...
Loading: LogManager ... 606 ms.
Loading: PoolManager ... 3 ms.
Loading: ThreadManager ...
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
I also get this error:
[Thr 6088] * LOCATION SAP-Gateway on host Current server / sapgw00
[Thr 6088] * ERROR hostname 'Old server' unknown
[Thr 6088] *
TIME Mon Apr 18 13:12:15 2011
[Thr 6088] * RELEASE 701
[Thr 6088] * COMPONENT NI (network interface)
[Thr 6088] * VERSION 38
[Thr 6088] * RC -2
[Thr 6088] * MODULE nixxhsl.cpp
[Thr 6088] * LINE 230
[Thr 6088] * DETAIL NiHsLGetNodeAddr: hostname cached as unknown
[Thr 6088] * COUNTER 8730
[Thr 6088] *
[Thr 6088] *****************************************************************************
Any help that would be great.
Thanks
JS

Dear Jean,
Hope you are doing good.
Not much investigation can be done with:
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
Just retrigger a server restart and then check the below logs. You will definitely find more information on the error:
/usr/sap/<SID>/work/ dev, std and jvm*
and
/usr/sap/<SID>/JC<nr>/j2ee/cluster/server0/logs/default trace (latest).
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Dispatcher not starting in NW04

hi I installed NW 04 EP (service pack 12) today. At the time of installations I didn't get any expceptions. I installed Oracle first then used RI to do the rest of the process.
Portal started fine for the fist time. Somehow I stopped and restarted it without making any chages and I tried to logon with j2ee_admin user, though I gave the right password it didn't allow me to logon. I tried to logon multiple times. Finally I activated emergency user with console.bat utility.
I stopped and restred EP and now Dispatcher is not starting
when I checked the dispatcher developer trace I see the following lines.
[Thr 4228] JLaunchIAbortJava: abort hook is called
[Thr 4228] JLaunchCloseProgram: good bye (exitcode=-2)
and I see the following in JControl developer trace
[Thr 2960] JControlICheckProcessList: process dispatcher started (PID:4204)
[Thr 2960] Wed Aug 24 15:54:07 2005
[Thr 2960] JControlICheckProcessList: process dispatcher (pid:4204) died (RUN-FLAG)
[Thr 2960] JControlIResetProcess: reset process dispatcher
[Thr 2960] JControlIResetProcess: [dispatcher] not running -> increase error count (6)
[Thr 2960] JControlICheckProcessList: process server0 (pid:3288) died (STOPPING)
[Thr 2960] JControlIResetProcess: reset process server0
Any idea on what went wrong with Dispatcher?
Thanks for your help.
Chandra.

Nagesh,
I restarted the machine many times (atleast 4), and the dispatcher is still not starting. Let me know what memory setting I need to bring it down? Do you mean server node id settings using configtool.bat?
Please let me know the values too. We have 4 GB RAM and 4 processor Dell Server running on WIN 2k3 (OS is uptodate).
Chandra.

Dispatcher not started after client import

hi all,
here i imported one client and the client import process is running but in that system we have other clients my question is users are unable to log in into that other clients
so i checked into os leve (dpmon) and after i try to stopsap and its stoped and after it is not started the error message is shown as
oscollector is already running,,   and
trying to start sid database .....
log file :/ /home / sidadm / startdb.log
please what can i do for my server start

hi srineevas elow are shown my usr/sap/sid/sys/exe/run/startdb
#!/bin/sh
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ind/ind/startdbora#4 $
NAME: startdb
PURPOSE: startup an ORACLE database
PARAMETER:
      none
Environment
      ORACLE_HOME     must be set
      ORACLE_SID      must be set
Return Codes:
      0       ok. DB may have already been running.
      1       erroneous license check
      2       DB not startable: inconsistency?
      3       environment check failed
      4       orasrv error / starting of listener error
      5       script was killed
USAGE: startdb [ORACLE_HOME] [startRemoteService]
DESCRIPTION:
- initialize
- start orasrv / now: lsnrctl start
- check database state (connect)
- startup database, change archivelog mode
if this procedure is changed (e.g. Test System)
there is no guarantee of hotline support if the system crashes
- check database state (connect)
- check archive log state
- licence check
DGUX and Sequent exceptions
R3trans is not available on the DG standalone DB server
therefore the Oracle processes are checked
#History
#2001-03-01     rv      replace SAPSYSTEMNAME with DB_SID where appropriate, due to SDMS
#2000-11-14     rv      include begin/end messages from startsap
#1996-07-25     kgd     SQLNETV2 and SQLNETV1
#1996-07-11     ar      Sequent exceptions
#1996-06-11     kgd     SQLNET*V2 adaptions
#1994-12-7      mau     warning "Transport system not init." not only to
                      logfile but also to stdout
                      Project: 22C 241
#1995-07-25     dg      included check that caller is admuser
#====================================================================
FUNCTION: check_db_running
PURPOSE: check wheather db is runnig without R3trans
set returncode = 0 db available
    returncode != 0 db error
check_db_running()
in order to find out if the database is available
check whether the Oracle processes are running or not
echo "
" >> $LOG
echo `date` >> $LOG
echo "check if Oracle processes are running" >> $LOG
$PS | grep ora_[a-z][a-z][a-z][a-z]_${ORACLE_SID} > /dev/null 2>&1
if test $? -eq 0
then
    echo 'Database already running' >> $LOG
    returncode=0;
else
    echo 'database not available' >> $LOG
now check if sgadef exists
if a database connect fails but sgadef exists,
it is possible that there is a severe database problem
otherwise continue with startup procedure
    if test -f $ORACLE_HOME/dbs/sgadef$.dbf -o \
             -f $ORACLE_HOME/dbs/sgadef$.ora
    then
      echo "*** ERROR:Database possibly left running when system" >> $LOG
      echo "    went down(system crash?)." >> $LOG
      echo "    Notify Database Administrator." >> $LOG
      returncode=$error_dbnotavail
    else
      echo 'There are no Oracle processes running - ' >> $LOG
      echo 'Database is probably already stopped.' >> $LOG
      returncode=$error_dbnotavail
    fi
fi

Can not start the cluster database using srvctl

Created a RAC database with CRS.
When i start the cluster database with srvctl, it appears that the database is started (i made sure using srvctl status), but when i try to login to the database using sqlplus, i get a message 'connected to idle instance'. if i try to start the database from sqlplus, i get message 'requested INSTANCE_NUMBER is busy!.
any thoughts why i can not connect to the database using sqlplus after i start the database using srvctl?
I stop the database using srvctl and started using traditional sqlplus, it will start with out any problem.
what am i missing?

check ur oracle_sid,also try to connect as sqlplus sys/****@prod as sysdba
may be this is due to improper setting of init.ora file.
and post ur sqlplus output here.
Thanks
Kuljeet Pal Singh

Dispatcher not starting, inconsistencies with database.

Similar Messages

Maybe you are looking for