Dispatcher stopped and System does not start
After I had restarted my Application server, the dispatcher stoped.
Now, I canu00B4t start the System, because the dispatcher doesnu00B4t start.
Can anyone help me?
This file is from the trace:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid CCC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3972
Fri Aug 08 20:33:52 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3972) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Aug 08 20:33:57 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >solman_CCC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07810040, size: 4892312)
DpShMCreate: allocated sys_adm at 07810040
DpShMCreate: allocated wp_adm at 07812090
DpShMCreate: allocated tm_adm_list at 07816980
DpShMCreate: allocated tm_adm at 078169B0
DpShMCreate: allocated wp_ca_adm at 07C1FDF0
DpShMCreate: allocated appc_ca_adm at 07C25BB0
DpShMCreate: allocated comm_adm at 07C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07CA89B0
DpShMCreate: allocated gw_adm at 07CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07CA8A20
DpShMCreate: allocated wall_adm at 07CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1320
argv[0] = C:\usr\sap\CCC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\CCC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\CCC\SYS\profile\CCC_DVEBMGS00_solman
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=4084
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=CCC
argv[7] = -DSAPMYNAME=solman_CCC_00
argv[8] = -DSAPPROFILE=C:\usr\sap\CCC\SYS\profile\CCC_DVEBMGS00_solman
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( solman) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >solman_CCC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Aug 08 20:33:58 2008
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Aug 08 20:33:59 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Fri Aug 08 20:34:37 2008
ERROR => W0 (pid 3436) died [dpxxdisp.c 14441]
ERROR => W1 (pid 3668) died [dpxxdisp.c 14441]
ERROR => W2 (pid 3600) died [dpxxdisp.c 14441]
ERROR => W3 (pid 3656) died [dpxxdisp.c 14441]
ERROR => W4 (pid 3684) died [dpxxdisp.c 14441]
ERROR => W5 (pid 1952) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2908) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3616) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 328) died [dpxxdisp.c 14441]
ERROR => W9 (pid 4024) died [dpxxdisp.c 14441]
ERROR => W10 (pid 3580) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3164) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 2684) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
This is the trace from dev_w0:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Aug 08 22:22:18 2008
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4532]
M sysno 00
M sid CCC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 4088
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4088) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Aug 08 22:22:19 2008
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08010040, size: 4892312)
M DpShMCreate: allocated sys_adm at 08010040
M DpShMCreate: allocated wp_adm at 08012090
M DpShMCreate: allocated tm_adm_list at 08016980
M DpShMCreate: allocated tm_adm at 080169B0
M DpShMCreate: allocated wp_ca_adm at 0841FDF0
M DpShMCreate: allocated appc_ca_adm at 08425BB0
M DpShMCreate: allocated comm_adm at 08427AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 084A89B0
M DpShMCreate: allocated gw_adm at 084A89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 084A8A20
M DpShMCreate: allocated wall_adm at 084A8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host solman
M
M Fri Aug 08 22:22:20 2008
M calling db_connect ...
B create_con (con_name=R/3)
B *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
[dbcon.c 4532]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server solman_CCC_00 on host solman (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Aug 08 22:22:20 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M
M Fri Aug 08 22:22:21 2008
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4088) [dpnttool.c 327]
Similar Messages
-
UME Service suddenly stopped and now does not start
Hello experts, a weird problem has come up to my attention. A few days ago our Enterprise Portal suddenly went down and when we restarted all services, the UME Service did not start. We tried restarting the whole server, to no avail. This service just won't start. We are using EP 7 and our UME is configured to take ABAP as data source.
Looking at one of the logs (security.log) I found the following interesting errors:
#1.5 #0012799E98F6002100000000000027250004456D687024B5#1202236112773#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Error#1#com.sap.security.core.persistence#Java#User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".##User Management Engine (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connection data are correct and the backend system is available. Error message: "". Connection data (obtained from properties of UME service in section "ume.r3.connection.master.": "".#2#Name or password is incorrect (repeat logon)#{
passwd=********
lang=EN
receiverid=master
sysnr=00
client=500
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=10.1.2.42
poolmaxwait=10000
#1.5 #0012799E98F6002100000003000027250004456D68702DA9#1202236112775#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Error#1#com.sap.security.core.persistence#Java#An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". ##An exception was thrown in the UME/ABAP user management connector that was caused by unavailability of the RFC communication with the backend system: "". #1#Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F6002100000005000027250004456D68702ECA#1202236112776#/System/Security/Usermanagement##com.sap.security.core.persistence#######SAPEngine_System_Thread[impl:5]_48##0#0#Fatal#1#com.sap.security.core.persistence#Java#Initialization of ABAP data source () failed: "". This message is critical if it appears during the startup of the AS Java.##Initialization of ABAP data source () failed: "". This message is critical if it appears during the startup of the AS Java.#2#com.sap.security.core.persistence.datasource.imp.R3Persistence#Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F600210000000A000027250004456D68703B33#1202236112779#/System/Security/Usermanagement##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_48##0#0#Fatal#1#com.sap.security.core.server.ume.service.UMEServiceFrame#Plain#Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)###
This errors also appear on the trace file.
Any suggestions? If you need any other info, please let me know.
Regards.I can log on to the backend system (ABAP) with any user.
I will include the last lines from DefaultTrace#.trc:
#1.5 #0012799E98F600230000000800006AF70004456F971D4B4C#1202245485807#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame.start()#######SAPEngine_System_Thread[impl:5]_122##0#0#Error##Plain###com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)#
#1.5 #0012799E98F600230000000900006AF70004456F971D4BC5#1202245485807#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame.start()#######SAPEngine_System_Thread[impl:5]_122##0#0#Error##Plain###com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
caused by -
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.getAttributes(R3JCo640Proxy.java:490)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.doInitRfc(R3PersistenceBase.java:732)
at com.sap.security.core.persistence.datasource.imp.R3Persistence.localInitialization(R3Persistence.java:277)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:466)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
#1.5 #0012799E98F600230000000B00006AF70004456F971D4E02#1202245485808#com.sap.security.core.server.ume.service.UMEServiceFrame##com.sap.security.core.server.ume.service.UMEServiceFrame#######SAPEngine_System_Thread[impl:5]_122##0#0#Fatal#1#/System/Security/Usermanagement#Plain#Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)###
#1.5 #0012799E98F600230000000D00006AF70004456F971D63C5#1202245485814#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_122##0#0#Error#1#/System/Server#Plain###Service com.sap.security.core.ume.service error. Nested exception is: com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
#1.5 #0012799E98F600230000000F00006AF70004456F971D6668#1202245485814#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_122##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Name or password is incorrect (repeat logon)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:105)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Name or password is incorrect (repeat logon)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:234)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:489)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:444)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
#1.5 #0012799E98F600230000001100006AF70004456F971D6861#1202245485815#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_122##0#0#Fatal#1#/System/Server#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.# -
Dispatcher process on ABAP + JAVA system does not start.
Hi all,
Dispatcher process on ABAP + JAVA system does not start.
Can someone help me to solve this issue in a ABAP+JAVA stack system?
service p4 ================= ERROR =================
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
s (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.', Arguments: []--> : Can't find resource for bundle java
.util.PropertyResourceBundle, key Can't assign requested address (errno:227)
com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor constructor : can't open server socket.
at com.sap.engine.services.rmi_p4.dispatcher.TransportMonitor.<init>(TransportMonitor.java:211)
at com.sap.engine.services.rmi_p4.dispatcher.P4ServiceFrame.start(P4ServiceFrame.java:93)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
[Framework -> criticalShutdown] Core service p4 failed. J2EE Engine cannot be started.
Nov 9, 2011 6:41:09 AM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:6]_26] Fatal: Critical shutdown was invoked. Reason is: Core
service p4 failed. J2EE Engine cannot be started.
Please let me know if you need any further information in this regard.
with regards,
RajaHi,
Core service p4 failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Can't assign requested addres
Please reboot the server to free up occupied ports. Later start the sap system.
Regards,
Deepak kori -
Have gone to update and sync Iphones and Ipods and Itunes does not start up.
Both the sccbase.dll and slbcsp.dll failed giving the error "LoadLibrary("xxxxxx.dll") failed. - The specified module could not be found."
There's our likely culprits. We'd better try swapping them out on the PC.
(The instructions I'm about to give are quite possibly going to sound odd ... I'll explain what we're doing and why at the end of the post.)
Navigate to the C:\Windows\System32\ directory. (If you've set a different directory from \Windows\ as your Systemroot, look for \System32\in the alternate Systemroot rather than Windows.)
Can you see sccbase.dll and slbcsp.dll in there?
If so, drag each of them to your Desktop.
Now close the C:\Windows\System32\ window, wait about 5 seconds, and then open navigate to C:\Windows\System32\ again. Have copies of sccbase.dll and slbcsp.dll reappeared in that directory?
If one or both of the dlls aren't replaced and/or you get an error message from Windows saying you have a system file missing, move the dlls back into \System32\ from your desktop, and post back.
(What we're doing here is using XP's Windows File Protection system. It maintains a \dllcache where copies of essential dlls are kept on the PC. If it detects that a dll from \System32\ is missing, or has been replaced by an earlier version, and it has a current version of the dll in the dllcache, it will move a copy of the correct version of the dll into \System32\. There's more information about this in the following document from Microsoft: Description of the Windows File Protection feature.)
If the dlls are replaced, try restarting the PC and then relaunching iTunes again. Does it launch this time?
If it doesn't launch, try reregistering sccbase.dll and slbscp.dll again. Do they reregister properly, or do you get an error message again? -
(10.1.3.0.4) Help System does not start
For some reason my help system does not start when selecting from the menu. "Table of contents" or "index" options do nothing. It use to work fine. Conext sensitive help works okay by pressing F1.
Any ideas?Hi paulfrench, check your documentation settings
Menu Tools -> Preferences -> Documentation
Make sure you have checked all of them.
Luis R. -
My iPhone just stopped working; it does not start up
My iphone just stopped working; it does not start up!
Try resetting it:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
I updated my iphone 4 to ios 6.1.3 and it does not start now
i updated my iphone 4 to ios 6.1.3 and it does not start now
That message usually means you hacked the phone to unlock it.
When you updated your IOS it locked back up to the original phone carrier.
Only the carrier that the phone is locked to is authorized to unlock it.
Is this the case? -
My iPod Touch fell into the washer and now does not start. What can I do to fix it?
If it is totally dry:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price -
hi,i have a very big problem....i had an accident with my macbook , i poured some champagne and it does not start anymore....it will work again???
If you spilled champagne on it, chances are not good. If you haven't alredy DO NOT turn it on or charge it. I would immediately take it to the Genius Bar and see if they can clean it up before.
Had the same problem with a 15" MBP and a tea spill and I did the opposite. Trashed the Logic & Keyboard Assembly. Cost to repair was going to be more than what I paid for a computer so ended up having to replace it. -
Can not update tiger and safari does not start
Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
CrobusCrobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987�
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe -
"Start Deletion of Data in Receiver System" does not start
I faced the problem tha data deletion in Receiver system is not started in TDTIM synario.
I started the activity "Start Deletion of Data in Receiver System" , the job "CNV_TDMS_09_RESTART_JOBS" is aborted till the job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over in Receiver System.
The error message is "No log was created for object CAGTFBS and sub-objekt SLOMBT".
After The job "CNV_MBT_CNV_TDMS_09_START_JOBS" is over, the job "CNV_TDMS_09_RESTART_JOBS" is finished normaly but the no deletion job is released.
I carried out some deletion job by manual operation but other deletion job is not released.
Does Anyone knows the solution of this problem ?
Version:TDMS3.0 SP17
Basis: 700
SusumuHi Joerg,
Thank you for your reply.
> Please check the syslog for any reference to bad defined batch jobs! (all on receiver)
Syslog is nothing in receiver system.
> Is there any deletion job that can not be startet manually on the receiver side?
> (So normally on top of the list of scheduled deletion jobs.
I think all deletion job can be started manually.
Nomally, some deletion job is finished, the job is released next deletion job but no deletion jobs is released.
In addition, If rerun job "CNV_TDMS_09_RESTART_JOBS" is finished, no deletion jobs is released.
Best regards,
Susumu -
Dispatcher of J2EE Engine does not start
I have the following problem, we restart the j2ee engine and the dispatcher does not come up. The server and SDM works fine
<b>dev_dispatcher:</b>
trc file: "/usr/sap/Q82/JC00/work/dev_dispatcher", trc level: 1, release: "700"
node name : ID2430700
pid : 1192142
system name : Q82
system nr. : 00
started at : Tue Nov 20 10:47:45 2007
arguments :
arg[00] : /usr/sap/Q82/JC00/exe/jlaunch
arg[01] : pf=/usr/sap/Q82/SYS/profile/Q82_JC00_sapQ82
arg[02] : -DSAPINFO=Q82_00_dispatcher
arg[03] : pf=/usr/sap/Q82/SYS/profile/Q82_JC00_sapQ82
[Thr 1] Tue Nov 20 10:47:45 2007
[Thr 1] *** WARNING => INFO: Unknown property [instance.box.number=Q82JC00sapq82] [jstartxx_mt. 841]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.host=sapQ82] [jstartxx_mt. 841]
[Thr 1] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx_mt. 841]
[Thr 1] *** WARNING => INFO: Unknown property [instance.system.id=00] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/Q82/JC00/j2ee/cluster/instance.properties]
-> ms host : sapQ82
-> ms port : 3901
-> OS libs : /usr/sap/Q82/JC00/j2ee/os_libs
-> Admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
Instance properties
-> ms host : sapQ82
-> ms port : 3901
-> os libs : /usr/sap/Q82/JC00/j2ee/os_libs
-> admin URL :
-> run mode : normal
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID2430700 : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID2430750 : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID2430700 : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
-> [01] ID2430750 : /usr/sap/Q82/JC00/j2ee/cluster/instance.properties
[Thr 1] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 1] JLaunchRequestQueueInit: create pipe listener thread
[Thr 258] JLaunchRequestFunc: Thread 258 started as listener thread for np messages.
[Thr 515] WaitSyncSemThread: Thread 515 started as semaphore monitor thread.
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 1] CPIC (version=700.2006.09.13)
[Thr 1] [Node: dispatcher] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 1] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/Q82/JC00/exe/jvmx.jar
JStartupIReadSection: read node properties [ID2430700]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -Xj9 -Xgcpolicy.gencon -verbose:gc -Xmn70m -Xdisableexplicitgc -Djava.security.policy=.\java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 202M
-> init heap size : 202M
-> root path : /usr/sap/Q82/JC00/j2ee/cluster/dispatcher
-> class path : ./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/Q82/JC00/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/Q82/JC00/exe/jstartup.jar:/usr/sap/Q82/JC00/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50000
-> shutdown timeout : 120000
[Thr 1] JLaunchISetDebugMode: set debug mode [no]
[Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [dispatcher]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Xj9
-> arg[ 4]: -Xgcpolicy.gencon
-> arg[ 5]: -verbose:gc
-> arg[ 6]: -Xmn70m
-> arg[ 7]: -Xdisableexplicitgc
-> arg[ 8]: -Djava.security.policy=.\java.policy
-> arg[ 9]: -Djava.security.egd=file:/dev/urandom
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -Dsys.global.dir=/usr/sap/Q82/SYS/global
-> arg[ 12]: -Dapplication.home=/usr/sap/Q82/JC00/exe
-> arg[ 13]: -Djava.class.path=/usr/sap/Q82/JC00/exe/jstartup.jar:/usr/sap/Q82/JC00/exe/jvmx.jar:./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> arg[ 14]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/Q82/JC00/exe::/usr/lib:/usr/sap/Q82/JC00/j2ee/os_libs:/usr/sap/Q82/JC00/exe:/usr/sap/Q82/JC00/exe:/usr/lib:/lib:/usr/sap/Q82/SYS/exe/run:/oracle/client/10x_64/instantclient
-> arg[ 15]: -Dmemory.manager=202M
-> arg[ 16]: -Xmx202M
-> arg[ 17]: -Xms202M
-> arg[ 18]: -DLoadBalanceRestricted=no
-> arg[ 19]: -Djstartup.mode=JCONTROL
-> arg[ 20]: -Djstartup.ownProcessId=1192142
-> arg[ 21]: -Djstartup.ownHardwareId=R1572408088
-> arg[ 22]: -Djstartup.whoami=dispatcher
-> arg[ 23]: -Djstartup.debuggable=no
-> arg[ 24]: -DSAPINFO=Q82_00_dispatcher
-> arg[ 25]: -DSAPSTARTUP=1
-> arg[ 26]: -DSAPSYSTEM=00
-> arg[ 27]: -DSAPSYSTEMNAME=Q82
-> arg[ 28]: -DSAPMYNAME=sapQ82_Q82_00
-> arg[ 29]: -DSAPDBHOST=sapQ82
-> arg[ 30]: -Dj2ee.dbhost=sapQ82
[Thr 772] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-6) [jhvmxx_mt.c 542]
[Thr 772] *** ERROR => Cannot load Java VM (server) (rc=-1) [jlnchxxi_mt. 752]
[Thr 772] **********************************************************************
ERROR => Java VM initialization failed.
Please see SAP Note 943602 , section 'Java VM initialization issues'
for additional information and trouble shooting.
[Thr 772] SigISetIgnoreAction : SIG_IGN for signal 20
[Thr 772] JLaunchCloseProgram: good bye (exitcode = -1)
Does somebody has any ideas?
Regards PeterHi folks,
i solved it by myself. There was a wrong javaparameter in the settings of the dispatcher.
-Xgcpolicy.gencon instead of -Xgcpolicy:gencon, my colleague has found it out.
Regards Peter -
Photoshop CS5 and CS6 does not start. Windows 7
I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?
Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?
-
After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
HP ProBook 4540s - system does not start after recovery
My friend gave me the laptop, because system was not detected. I decided to recovery operating system.
I had to deal with following error messages:
- I was getting error "Boot Device not Found"
I started HDD test with result Passed
- next step was to recovery OS
it finished with new error message
"Selected boot image did not authenticate. Press to continue"
according to this topic:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Selected-boot-image-did-not-aut...
I did following:
- secureboot changed to disabled
problem persisted
- legacy changed to enabled
since then I am not able to do anything. When I let the system start, it finishes with HP logo and nothing happens.
When I press ESC after restart, menu is displayed but I am not able to enter to BIOS. If freezes all the time on the menu with highlihted text.
I tried to remove battery, unplug power, press 30 seconds powerbutton, nothing has changed.
Next step should be probably to temporarily remove RTC battery, but I am not sure if am I allowed to open it without loosing waranty.
The laptop is old approx. 3 months.
This question was solved.
View Solution.Hi:
Since the notebook is under warranty, I would suggest your friend contact HP technical support and have them fix the issue.
When you get a boot device not found error it is either the hard drive (whether the test says it passed or not), or the drive controller on the motherboard.
I wouldn't touch it with a ten foot pole.
The HP support tech will probably have your friend run through some of the steps you did before they tell him what to do next such as returning it for warranty repairs, etc.
Maybe you are looking for
-
What is the Relationship ID to find employee line manger and his subordinate?
Dear Experts, 1.Can you suggest FM - where using particular employee Position ID can we pull out his line manger and subordinate and also provide the relationship code to get the detail of line manager and subordinate. 2.For eg say employee position
-
Payment Advice is automatically created during bank statement posting.
Dear All, I am importing bank statement using FF_5, (MT940) but the problem is payment advice is getting generated automatically, due to which i am unable to clear the customer. I dont understand how payment advice is getting generated? Please let me
-
Best back up software for my songs in iPod
So I will like to capture all of the songs back into my hard drive in full quality. Is this possible? and would the songs be full quality? What software do you recommend to do this? Thank you in advance.
-
Difference between R/3 and Non R/3 Source Systems...!!!
Hi BW Experts, Could anyone please tell me what are the differences when extracting data from R/3 and Non R/3 Source Systems. I might have to use Oracle as a Source System. Thanks in Advance. Regards, Giftedbrain.
-
Personal Data and Address for Country Grouping 99 - error on ESS
Hello All, I have configured personal data and address infotypes in ESS for the country grouping 99. I have done the following config 1. Assign Screen Structure to Infotype Versions 2. Define Active Subtypes and Use Case 3. Define Country-Specific Ap