Dispathcher not starting after SOLMAN instllation

I have installed a solutin Manager. Immediately after installation i restarted the SOLMAN and the dispatcher is nto starting.
Pls hlep
PFB the log
<b>----
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        SOL
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        5016
Thu Oct 25 22:45:17 2007
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5016) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Oct 25 22:45:22 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SCDDEVSAP02_SOL_00                      <
DpShMCreate: sizeof(wp_adm)          20104     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06A10040, size: 4893744)
DpShMCreate: allocated sys_adm at 06A10040
DpShMCreate: allocated wp_adm at 06A12090
DpShMCreate: allocated tm_adm_list at 06A16F18
DpShMCreate: allocated tm_adm at 06A16F48
DpShMCreate: allocated wp_ca_adm at 06E20388
DpShMCreate: allocated appc_ca_adm at 06E26148
DpShMCreate: allocated comm_adm at 06E28088
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06EA8F48
DpShMCreate: allocated gw_adm at 06EA8F88
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06EA8FB8
DpShMCreate: allocated wall_adm at 06EA8FC0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3612
argv[0] = D:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\SOL\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_SCDDEVSAP02
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=4889
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SOL
argv[7] = -DSAPMYNAME=SCDDEVSAP02_SOL_00
argv[8] = -DSAPPROFILE=D:\usr\sap\SOL\SYS\profile\SOL_DVEBMGS00_SCDDEVSAP02
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
Thu Oct 25 22:45:23 2007
***LOG Q0K=> DpMsAttach, mscon ( SCDDEVSAP02) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >SCDDEVSAP02_SOL_00                      <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Oct 25 22:45:24 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 25 22:45:35 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1456
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4896) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3612)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 25 22:46:03 2007
ERROR => W0 (pid 5300) died [dpxxdisp.c   14441]
ERROR => W1 (pid 5304) died [dpxxdisp.c   14441]
ERROR => W2 (pid 988) died [dpxxdisp.c   14441]
ERROR => W3 (pid 3960) died [dpxxdisp.c   14441]
ERROR => W4 (pid 4448) died [dpxxdisp.c   14441]
ERROR => W5 (pid 5284) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 5328) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 5080) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 5232) died [dpxxdisp.c   14441]
ERROR => W9 (pid 3380) died [dpxxdisp.c   14441]
ERROR => W10 (pid 3652) died [dpxxdisp.c   14441]
ERROR => W11 (pid 5340) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W12 (pid 5288) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W13 (pid 5336) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:13 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Fri Oct 26 05:46:13 2007
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA     5300 Ended         no      1   0        0
1 DIA     5304 Ended         no      1   0        0
2 DIA      988 Ended         no      1   0        0
3 DIA     3960 Ended         no      1   0        0
4 DIA     4448 Ended         no      1   0        0
5 DIA     5284 Ended         no      1   0        0
6 UPD     5328 Ended         no      1   0        0
7 ENQ     5080 Ended         no      1   0        0
8 BTC     5232 Ended         no      1   0        0
9 BTC     3380 Ended         no      1   0        0
10 BTC     3652 Ended         no      1   0        0
11 BTC     5340 Ended         no      1   0        0
12 SPO     5288 Ended         no      1   0        0
13 UP2     5336 Ended         no      1   0        0
Dispatcher Queue Statistics               Fri Oct 26 05:46:13 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Fri Oct 26 05:46:13 2007
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Fri Oct 26 05:46:13 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:18 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SCDDEVSAP02_SOL_00                      < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1480) (SOFT_KILL)
Stop icman
killing process (308) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1480 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1480 HANDLE:1556)
wait for end of icman
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:23 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:24 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:25 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:26 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:27 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:28 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:29 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:308 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 25 22:46:30 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:308 HANDLE:1560)
[DpProcDied] Process died (PID:3612 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >SCDDEVSAP02_SOL_00                      <)
NiIMyHostName: hostname = 'SCDDEVSAP02'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 25 22:46:31 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12099]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1480 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1480 (pos=3)
SiSelNRemove: removed sock 1480
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/14
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1480
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5016) [dpxxdisp.c   10371]
Good Bye .....</b>

hi,
in windows services check the oracle service and also listner service oracle SID service are running.also check sap services are running.those are not running start it manually and then try.
regards
ajai

Similar Messages

Firefox will not start after I upgraded from Ubuntu 8.04 to Ubuntu 10.04.

I was using Firefox without issue on Ubuntu 8.04. I then upgraded to Ubuntu 10.04. Firefox would not start after upgrade. Message said it was already running!
I checked the System Monitor and saw it was "sleeping". I ended process. Firefox then would start, however..... I always have to go into System Monitor before I start Firefox to stop it from running (sleeping) even if I already just quit the program or after a fresh reboot.
I do not use a firewall or virus program.
My router has some sort of firewall hardware, and it is the same router I used with 8.04 with no problem.
What is going on? Why is the program sleeping when I try to start it. Why do I always get the message that it is already running (and I have to shut it down) before I can start it.
It is either a Ubuntu problem or a Firefox problem.
Sonny.

''Crashes at startup can occur in Firefox 7 or above (but not Firefox 6 or earlier) if you are using a corporate login system such as IBM Tivoli Access Manager or Oracle Enterprise Single Sign On Manager ([https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927]). '''See the bug report for a suggested workaround''' or downgrade to Firefox 3.6.xx (available [http://www.mozilla.org/firefox/all-older.html here]) which is still being maintained.''
Ref: http://kb.mozillazine.org/Firefox_crashes#Crash_when_starting_Firefox
The workaround for the crash is linked [https://bugzilla.mozilla.org/attachment.cgi?id=563484 HERE], under "Attachments" in the bug report. When you click that link it will show the contents of the .reg file (you can save the page as "ff7fix.reg" on your computer, and then merge it into the Windows registry, f you are comfortable doing that).

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

ITunes 10.1.2 not starting after update

iTunes will not start after being updated to 10.1.2. Also experienced internet explorer being extremely slow. Tried to repair the installation, but same result. Uninstalled iTunes, restarted the computer, and internet explorer started working again. Reinstalled iTunes from Apple web page. Same result as after update. Everything worked fine before update, no errors during installation.

I have just had exactly yhe same problem.
Try this!
Go to the itunes support page and uninstall / reinstall Itunes + quicktime exactly to the troubleshooting instructions.
It takes some time and patience but it works on my Vista operating system. Windows 7 should also work as the instructions refer to both systems.

Windows 8.1 is not starting after installing Bluetooth driver

I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan Mukherjee

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Windows 8.1 desktop PC not starting after hibernation

Hi,
I have a PC that is not starting after hibernation. There are different errors appearing after my tries to repair the boot. I have tried to find a document online describing the boot process but I can't find any. I know how it worked in the old days with boot.ini
and such but this new one is hard to figure out without a desciption.
First I tried to use the automatic repair process but that didn't work. I have also tried bootrec, bootedit, and bcdboot.
I then bought the Easy Recovery Essentials from NeoSmart Technologies but that didn't help to fix the issue, PC still boots to error 1. below. I tried the following process that they suggested:
I have followed the instructions on this link http://j.mp/BcdRepair that they suggested but it didn't help. Instead of the two errors I have come across (PROCESS1_INITIALIZATION_FAILED and error code 0xc000000f on file \EFI\Microsoft\Boot\BCD via F8, both with
white text on blue background), I got to a black page with grayish text telling me the following:
Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc [...]
2. Choose your language [...]
3. Click "Repair your computer."
File: \Windows\system32\winload.exe
Status: 0xc000000f
Info: The application or operating system couldn't be loaded because a required file is missing or contains errors.
It looks like one boot entry gets added to the boot menu every time the PC runs the automatic repair process. In the boot menu I now have more than ten occurrences of Windows Boot Manager.
Errors:
1. Your PC ran into a problem and needs to restart [...] you can search online later for this error: PROCESS1_INITIALIZATION_FAILED
2. Manual boot to one of the Windows Boot Manager entries that appears via F8 gives me the error code 0xc000000f on file \EFI\Microsoft\Boot\BCD.
I even tried to copy the BCD from an exactly identical PC but then the path to the BCD disappeared and I'm not sure what drive letter to enter in bcdedit because C: is not C: but X: when booted into Advanced resque mode.
I could just reinstall Windows 8.1 but it feels frustrating, all the files are there. I just need to fix the boot.
Sorry if this post is a bit of messed up, that's about how I feel right now... :)
Does anyone have any suggestions and/or can point me in the direction of a nice document describing how the boot process works, where the BCD is located (I have several on the PC) I would be very happy.
Many thanks in advance.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

PC Suite 6.86.9.3 does not start after reboot

Hi!
I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
Does any one have an idea how to solve my problem?
Thanks
Michael

Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

Oracle 10g not starting after upgarde

Hi,
   Oracle not starting after upgrade and this service not starting automatically . This is error giving in the event viewer
Description:
The OracleDEV102iSQL*Plus service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Cheers
Murali

Hi,
I cannot explain what went wrong.
The error indicate that the upgrade is not finished or an error happened during the upgrade.
Please, review the alert log and the upgrade logs.
There are some possibilities:
- First one is to finish the upgrade to Oracle 10.2 manually. Please, check the Metalink notes:
Note 316889.1 - Complete checklist for manual upgrades to 10gR2
    Note:420146.1 - What is the Best Way to Upgrade to 10g?
- Second option is to restore the database to a point before the upgrade. In this case, you have to use the Oracle 9.2 software as well and need to restart the upgrade from the beginning.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.

My new iPhone4S could not start after the Apple mark disappear, the running screen stand still over 30mn. Can someone tell me how to solve this problem.
I tried to connect to iTune hoped to restore the system but iTunes did not reconige it.

here is link to the apple product feedback website:
http://www.apple.com/feedback/

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My iPhone4 does not start after it was out of charge and recharged again?

My iPhone 4 does not start after it was out of charge and recharged again?

Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy

16 GB x-Fi Style - does not start after charging

Hi,
4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
Can anyone help me?
Cheers,
Uli

Re: 6 GB x-Fi Style - does not start after charging:Just fyi
I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

Dispathcher not starting after SOLMAN instllation

Similar Messages

Maybe you are looking for