Displacement filter not working in Photoshop cc

I just downloaded Photoshop CC and was trying to use the displacement filter. Photoshop freezes every time I try, and when I open the Task Manager the message Displacement Failed appears. When I end that task the program will unfreeze, but I still don't get to use the displacement filter. Any suggestions?

Thanks for your help! It seems CC changed some of my preferences from what
I had. Maybe it will work better now. I thought maybe the image I used for
the Displacement Map had to be 8 bits, even though the rest of the file is
16 bits.
I have lots of available drive space. The install had reset to C drive for
the cache. C has about 1GB free space.
Preference setting
    cache levels - 4
    History states - 20
    GPU - Advanced
                    - everything checked except 30 bit display
RAM allocated - it reset the level at install to 8.8GB. I just increased
it to 10.5GB
Scratch Disc Config - At install changed to C drive only (~1GB available).
I just changed the order to my SSD with 107GB free as primary and another
drive with 1722 GB free as secondary.
I checked and I am using the 64 bit version of Photoshop.

Similar Messages

Oil Paint Filter not working in Photoshop CS6?

Ok, so I have had PS CS6 for a couple of months with no problems. I downloaded the oil paint filter, but to use it i needed to update my GPU drivers, so I did and it started working. Last week, i noticed that when i attempt to use the filter, it says that need to have the box in the preferences section saying 'enable graphics processor' checked. before it was previously checked. Now when i go to it, it is greyed out because of an 'error' in my display drivers. I reinstalled my display drivers but it did not solve the problem. For some reason it is still greyed out. I know that my GPU meets the requirements for using oil paint, it was working fine before so why has it decided to stop working now?
I have not removed any parts from my computer so it wouldn't have affected it. If anyone could help me on this issue then i would be extremely grateful.

You haven't installed the Photoshop updates -- you should be on 13.0.3 or 13.1.1, not 13.0.0.
Oil Paint uses the GPU, and requires a decent GPU.
Your GPU doesn't support many of the features needed by the Oil Paint filter, and barely supports any of the GPU features in Photoshop (notice that it does not support OpenCL, or Normal or Advance mode for GPU drawing).

I can not get the oil paint filter to work in photoshop CC

Can anyone help me with getting the oil paint filter to work in photoshop CC. I have a high end gaming card for video but it still does not seem to be available. Help. please!

You must be running Photoshop CC 2014.
The Oil Paint Filter was present in Photoshop CC but removed in CC 2014
Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
Photoshop Help | New features summary
As a Cloud member you can still keep CC installed for when you need the Oil Paint filter.

My hue/saturation filter quits working in Photoshop CS3

I keep having this issue where my hue/saturation filter just quits working. I use that filter religiously so it has to be fixed each time it occurs. I've only had the Adobe CS3 for 3 months and I've had to resolve this 3 times now. Each time this has happend I've had to uninstall the entire CS3 design package and do a complete reinstall which takes almost 4 hours because my download uses the Adobe server. My product download was purchased online so I do not have a disk but rather files that I downloaded from Adobe with product serial numbers.
I've used Adobe for years, as far back as Adobe 5, and never had such a problem! I've checked in my preferences and have ample RAM available for the settings. I use Dell inspirion and have 2 GB of RAM total on my system.
Can someone please advise why this would keep happening.
Thank you very much.

Resetting your preferences is much faster than uninstalling/reinstalling, so if you haven't tried it, that would be what to do next, although it would be nice to figure out what the issue is.
To reset your preferences hold the Ctrl-Alt-Shift keys down (windows) or Ctrl-Option-Shift keys down (mac) as you start up Photoshop. You should get a message confirming whether you want to delete the preferences file. If resetting preferences fixes things, then you should try to remember what you've been doing, just prior to having the problem.
Once Hue/Sat sliders seem to be disabled, are they still way for all images that you open (a JPG for example), or are they just messed up for one image, but you need to work on that image so you have to fix things before doing anything else? Hue/Sat is not a valid operation for certain modes, like Grayscale, although the menu item is disabled in this case.
From: smk2008design
Sent: Saturday, April 11, 2009 4:40 PM
To: Steve Sprengel
Subject: Re: My hue/saturation filter quits working in Photoshop CS3
The hue/saturation filter window does open and it is not grayed out. However, it does not allow me to do any thing to it. I try to slide the saturation to the left or right and it does not move. The same goes for the "Lightness" and "Hue". I don't understand why it will work for a month or so and then just quit. I end up rebooting my system to try and resolve but unfortunately once this occurs it seems to be stuck no matter what I do, that is until I unstall the entire program and reinstall...
So if I need to change something in my preferences, what do you suggest that would be? I appreciate your help, thank you.

Logitech mouse buttons not working in photoshop cc 2014

logitech mouse buttons not working in photoshop cc 2014 winds 8.1. Is this a common problem?
I have updated the latest drivers and have a few buttons programmed with keyboard shortcuts that used to work in previous versions of Photoshop but don't work now.
Scrolling with mouse in bridge stopped working in cc butI see it is now working.
any ideas?

Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based. Check with the developer to see if their blendmein extension works with CC 2014.
Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop. This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

Kitty,
Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
then:
As for your issue, make sure all applicable scripts are checked in Bridge preferences:

Perspective Warp not working in Photoshop 2014? Anyone else having this problem?

Perspective Warp not working in Photoshop 2014? Anyone else having this problem?

I cannot use Perspective Warp. | Mylenium's Error Code Database
Mylenium

New fonts not working in photoshop...

I have installed new fonts on my mac but they will not work in Photoshop.. can somoene help me? I don't know if I have done something wrong or need to take another step.. I am running CS4 and OS 10.6.4. The message I get when I try to use a font I recently installed is "Could not complete your request because something prevented the text engine from being intitalized." Any help would be greatly appreciated!
Lisa

Most likely you have some corrupt fonts installed.
Try validating the fonts using FontBook to find the most obvious problems.

[EB3]Events not working in Photoshop

Hi All,
Except the "applicationActivate", other events-
- documentAfterActivate
- documentAfterDeactivate
- documentAfterSave
are not working in Photoshop; strange thing is that they are working in InDesign.
The code I'm using(working in case of InDesign)-
var csInterface = new CSInterface();
csInterface.addEventListener("documentAfterActivate", myEventHandler);
function myEventHandler(){
alert(event.type); // not alerted in case of photoshop
Are these events not implemented in Photoshop? I also want these events with Illustrator (not tested yet)
Any help will be highly appreciated

Hi Shadowfax,
Thank you for reporting this. The mechanism of CSInterface Events needs Products like PS or
ID to send out the event like “applicationActivate” at the right time. However,
not all Products send out all events now; attachment events.png is a table that
listed current situation. Our team is actively pushing this issue forward and has asked Products team to
send out necessary events.

Spacebar shortcut for hand tool not working in Photoshop CC - have tried closing all other programs

The spacebar shortcut for hand tool is not working in Photoshop CC - as suggested in this form & others I have tried closing all other programs with no result. I have also reset photoshop to default settings & this did not make any difference either.

There may be a software conflict. I went through this today. When I did a search in Adobe foruns actually found tha answer on the Illustrator forum: http://forums.adobe.com/thread/1027227?
What the problem for me was an app called - 1Password. I had opened it, but not given my password to login and it was on in the background. As soon as I quit 1Password, the spacebar Hand Tool worked.
Then I opened 1Password again, and logged in. This time the spacebar works.
Others mentioned conflict with Spotify. And Chrome too. Couple other things. Read that thread in the link above.
Good luck!

CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either

My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?

BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet!

Save for web not working in Photoshop element 6

Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8 Anyone know how to fix that please tell me. Thanks

I just copy the preferences from my computer for you to see what are shown about adobe
file:///Users/raymondsmith/Library/Preferences/Adobe/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
file:///Users/raymondsmith/Library/Preferences/AdobeUM/
file:///Users/raymondsmith/Library/Preferences/AppleWorks/
file:///Users/raymondsmith/Library/Preferences/ByHost/
file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Merge to HDR Pro does not work in Photoshop 14.2.1. Image appears black. What is the problem?

Attached is screen shot. What happens is I go to File/Automate/Merge to HDR Pro, then select my 3 images, which are flattened psd files (I have tried tifs and jogs too), hit OK, it processes them, but instead of the image appearing, I get this black image. You can see my original images at bottom... jpegs too),

Lens Correction filter not working?

I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

Jeff,
   Thanks for the quick answer, but I still think the menu is misleading.
   If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
   The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
   Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working?

Displacement filter not working in Photoshop cc

Similar Messages

Maybe you are looking for