Display a Canon raw file as shot in Aperture?

I believe a number of settings are saved along with the image in a Canon raw file, such as. White Balance, colour space, Saturation, Contrast, sharpness and picture style as well as a few more things. Is it possible for Apreture to display the image with these "as shot" settings? A previous piece of software I used to use on a PC called Breezebrowser displayed the image prior to import (conversion) with these as shot settings but allowed you to alter these if required. If this could be done then I would find it a good starting point before post production adjustments are made. Hope this makes sense.

The short answer is no you cannot - yet. The best way to accomplish this is to create a series of preset templates that you can lift from prototype images and stamp to your imported images as a set of baseline adjustments. If you like the way that the in-camera settings are rendered just shoot RAW+JPG for each of the settings and then match the RAW to the JPG for each different setting for your starting points.
I am not real familiar with Canon stuff but if the WB is rendered a little differently that is the biggest pain in Aperture because it is one of the only adjustments that are not relative, it's absolute - so unlike brightness, contrast etc. you can't bump it up a little or down a little with a preset you can only assign an absolute value.
Hope this was at all helpful.
RB

Similar Messages

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?

I shoot only RAW - no JPEG-files except those visualizing the files on my memorycard or computer. I think i have to refine my question;
1. I know there is possible to make B/W HDR-images.
2. I know the best HDR images are based on RAW-files.
3. When i transfer the images in question to a HDR software they change, so when i view them in the software (either Preview or the HDR software) they are suddenly viewed (and processed) in color.
4. This never happend on my PC so i know it has to do with either Finder or Preview.
5. Do i have to make all my B/W HDR-images on the PC or is it a way for me to change how Finder/Preview show/alter my images?

Camera Conector and Canon Raw files

Hi
I have a Canon 30d, looking at buying a Ipod 30gig to use as a back up whilst shooting and filling a 1 gig cf card rather than keep buying cf cards...
Will the ipod accept the raw files? and will I be able to view the photos ie can an ipod read canon raw file format??
thanks
Steve

Hi
Whether or you can transfer raw photos from a camera to the iPod via the camera connector I don't know. However, I do know that on the older iPods (the ones with the color screen which can't play video) you could transfer a movie (mpg) that you had shot on a digital camera. Although the iPod couldn't play the movie, you could see tell if the movie had transferred, and you could then transfer the movie from iPod to the computer with no problems. Thus, it may be possible to transfer raw photos from camera to iPod via the camera connector and then from iPod to computer. However, the iPod CANNOT display raw photos, so even if you can transfer them, you won't be able to see them.
Hope this helps
Also see this page for some useful info:
http://www.apple.com/ipod/compatibility/cameraconnector.html

I have CS3 and when I try to open Canon Raw files in Bridge, I am unable to do so.

i have cs3 and i am unable to open canon raw files. please help.

What camera generated your Canon raw files.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Can't open Canon RAW files in LR1.3, Photoshop, Bridge

Hi.
I'm having a problem with some Canon RAW image files a second photographer sent me. He sent about 800 files and I'm only able to import into LR (1.3) about 15% of the files. The remainder will not import. Upon import, LR says something to this effect: "files appear to be unsupported or damaged." I tried them on both of my macs (my G5 and laptop) and had the same thing happened. Photoshop says: "Could not complete your request because Photoshop does not recognize this type of file."
They show with this icon: file:///Users/marthafitzsimon/Desktop/Picture%203.png
When I do the "get info" on these files, under "General:" it says, e.g., that a file is a 10.8MB file. Under the "More info:" box, it says the dimensions are 0x0 (that's weird because when I look at this for other good files there are numbers for the dimensions).
This is a picture of the "get info" window:
file:///Users/marthafitzsimon/Desktop/Picture%201.png
I have tried to open these files in LR, Photoshop, Bridge and Preview and nothing will open these.
The files are locked so I unlocked one, but that made no difference whatsoever.
I noticed one thing about the naming convention on the files,but I don't think this matters. My own Canon RAW files always have the .CR2 extension. All of his files have the .cr2 extension. Mine are all uppercase and his are lowercase. However, I don't think this could matter because the files I was able to download of his all had the .cr2 extension, just like the ones I couldn't download.
(PS: Just in case you saw my earlier posting, this problem has nothing to do with that. This is another second photographer's files that I'm having problems with. Jonathon LeFaive solved that other problem for me.)
Thank you for any help you can provide! Martha
Message was edited by: marthafitzsimon

LR 3 is a complete new build so it will not overwrite the earlier version of LR 1.3 or its catalog or other settings.
The install procedure will recognize your LR 1.3 catalog and ask if you wish to create/ convert to a LR 3 catalog. This procedure will not overwrite your 1.3 catalog but will create a LR 3 compatable copy.
Download the trial which is good for 30 days before you will need to pay the upgrade price of $99 if you decide to keep. The trial is the full package and you will not be restricted in any way.
The new features are a substantial upgrade with significant improvement in the conversion output of your raw files.
Full details are provided in the "read me file" included with the download which should be read carefully before you install. The decision should be a no brainer.

Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade. Try reinstalling Photoshop CS5.

Aperture 3.1 can't find/see my Canon RAW files when importing

Aperture 3.1 cannot see my CANON RAW files when doing import!!!
Do I really have to re-reference each image in the library if I have moved the library to a different volume? Images are not moved to the library, only referenced.

You don't want to re-import files if you move the library. You just need to reconnect the masters.
If you moved the whole thing over at once it should be easy; if you monkeyed with the folder names you could have a lot of work on your hands.

How do I open .CR2 Canon Raw Files in PS Elements 8 for iMac

When I open a .CR2 Canon Raw File (Canon T3i camera) in PSE 8 for iMac, I get all greys - no color. It is showing as color as a .CR2 on my desktop - when I bring it into PSE, it is grey. I chose first 16 bit, then 8 bit. Same result. What am I doing wrong? Thanks. George

Thank you Barbara for pointing this out. Since I'm new to forum stuff so missed the catch here. Got exactly same information as you posted. Got to know that ACR 6.2 doesn't support T3i files. It's ACR 6.4 which supports them but is incompatible with PSE8 ( http://kb2.adobe.com/cps/407/kb407111.html ).
So the solution seems to be either upgrade to a newer version of Elements or download the free DNG Converter ( http://www.adobe.com/products/photoshop/extend.displayTab2.html ) and convert the raw files to DNG.
Thanks again for correcting me here
Regards
andaleeb

Options for Canon RAW files?

I have a PowerPC at the office running 10.5.8. I am a graphic designer & photographer. Previously I was able to use iPhoto with my older DSLR to import Canon RAW files. I've upgraded to a Canon 60D and iPhoto no longer reads these new Canon CR2 files. As you know, CS4 is the latest version of the creative suite I can use on this Mac, and Photoshop CS4 doesn't open these RAW files either.
I checked out Adobe DNG converter but it won't run on this system.
Are there any options or is it just time to upgrade to a new Mac?

I don't currently have the install disc with me, but I can try that later when I remember to bring it with me.
I went to the Canon site to download a driver and it either is not available for my OS, or says I don't need it.
I want to do all of the above (import from camera/SD Card, open, convert/modify) in a seamless workflow. I use Lightroom 4 at home which I love but only have access to iPhoto at work.
Thanks for the help!

Canon RAW files

Is PSE 12 compatible with Canon RAW files? I have just bought a Canon 5d Mk III and PSE 9 doesn't recognise the RAW files. I need to be sure I can convert my RAW files in PSE 12 before I upgrade. I also had a similar problem with PSE 9 crashing every second time I opened it and when I tried to back up the catalogue. Took the advice about creating a new catalogue and it seems to have fixed the problem.Now I have to work out how to back up the old file.....

While Photoshop Elements works with Raw files, each new camera requires updates to the Camera Raw plug-in. To work with the Canon 5d Mk III you need Camera Raw version 6.7/7.1 (http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html).
Not all versions of Photoshop Elements will work with all versions of the Camera Raw plug-in. To use the Camera Version 6.7 you need Photoshop Elements 10. To work with Camera Raw 7.1, you need Photoshop Elements 11 (http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html).
So Photoshop Elements 12 will be able to work with this camera straight out of the box.
To work with this camera in Photoshop Elements 9, you would have to convert your raw files to DNG with the free DNG Converter.
Windows: https://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5645

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

Fujifilm X100s RAW file (RAF) support in Aperture

Any chance of an ETA for Fujifilm X100s RAW file (RAF) support in Aperture?

To download here: Digital Camera RAW Compatibility Update 4.05
as Update 4.05 to Aperture 3
that is a bit ambigous - reads like the long yearned for release of Aperture 4

Canon RAW files shot at high ISO not importing properly

Since updating to Yosemite I am having a problem with trying to use RAW files shot at ISOs higher then 800. In iPhoto I am simply getting a white rectangle with no image. I am able to import the images using the Canon software, then convert them to JPEGs and import them into iPhoto.

Since updating to Yosemite I am having a problem with trying to use RAW files shot at ISOs higher then 800. In iPhoto I am simply getting a white rectangle with no image. I am able to import the images using the Canon software, then convert them to JPEGs and import them into iPhoto.

"Bad" colors/banding when going into Edit mode with Canon RAW files

Just got my iLife '06 suite yesterday and ran into something very disturbing: something wrongwith the colors of RAW files once you go into editing mode. In the library view, they're fine. Try to edit one, and after a few seconds, there's a final refresh of the image window that heavily alters and bands the colors. (Looks almost like a poor conversion down to 256 colors or less - it's that bad).
This is happening on Canon 300D and 20D raw files, and did NOT happen with iPhoto 5. The RAW files open up and display just fine in Preview (as well as 3rd party apps) - problem is in iPhoto 6 only. I've already sent in a bug report - has anyone else tried double-clicking on a RAW file to go into Edit mode yet?
David Miller

I use Huey from Pantone to calibrate my monitor for consistancy in different lighting situations and across applications. But the same effect happens by choosing any one of the non-standard monitor calibrations.
Try this:
Choose a RAW photo and monitor calibratioin that causes the banding and discoloration.
Open the RAW photo in Edit mode and wait the couple of seconds for banding to appear.
Next, adjust the image size slider so that scroll bars appear at the bottom and right side of the photo. It doesn't take much. Notice the banding disappears!
Now grab one of the scroll bars and move it. Observe the banding and discoloration. And, when you release the scroll bar the banding disappears again.
I don't remember this happening with iPhoto 5.
I think it has something to do with the display
calibration. After I first saw this I switched back
to my default iMac G4 profile, and the problem wasn't
there anymore. I'm not sure what the difference is. I
set up several different profiles, each with
different choices for Advanced, White Point and
Gamma, and some trigger this banding, and some do
not.
Anybody have any similar experiences?

I can't convert .cr2 canon raw files with DNG converter.

I have a Canon 1000D, and im trying to open RAW files to edit in cs4. Everytime i open it, photoshop says that it doesnt recognise this type of file, but i open my friends RAW file (450D) and it can read it. I have also downloaded DNG converter, and it comes up with this message (first image) but my folder has .cr2 files......im really lost
I have also asked for help on the photoshop forum, but they referred me here...
Thanks

That file is only 2.7 megabytes. Raw files are usually larger. That likely means it's truncated (cut off prematurely).
You haven't selected one of the modes called sRAW (Small Raw) have you?
Like Tai Lao, I was able to extract a JPEG, and the EXIF data for the JPEG seems to be intact:
Filename - _MG_6825.CR2
ImageWidth - 1936
ImageLength - 1288
BitsPerSample - 8 8 8
Compression - 6 (JPG)
Make - Canon
Model - Canon EOS 1000D
StripOffset - 42212
Orientation - Top left
StripByteCount - 228990
XResolution - 72
YResolution - 72
ResolutionUnit - Inch
DateTime - 2011:05:23 12:15:31
ExifOffset - 270
ExposureTime - 1/4000 seconds
FNumber - 5.60
ExposureProgram - Aperture priority
ISOSpeedRatings - 1600
ExifVersion - 0221
DateTimeOriginal - 2011:05:23 12:15:31
DateTimeDigitized - 2011:05:23 12:15:31
ComponentsConfiguration - YCbCr
ShutterSpeedValue - 1/4096 seconds
ApertureValue - F 5.66
ExposureBiasValue - -2
MeteringMode - Multi-segment
Flash - Flash not fired, compulsory flash mode
FocalLength - 115 mm
UserComment -
SubsecTime - 03
SubsecTimeOriginal - 03
SubsecTimeDigitized - 03
FlashPixVersion - 0100
ColorSpace - Unknown (0xFFFFFFFF)
ExifImageWidth - 3888
ExifImageHeight - 2592
InteroperabilityOffset - 37768
FocalPlaneXResolution - 4438.36
FocalPlaneYResolution - 4445.97
FocalPlaneResolutionUnit - Inch
CustomRendered - Normal process
ExposureMode - Auto
White Balance - Manual
SceneCaptureType - Standard
Maker Note (Vendor): -
Macro mode - Normal
Self timer - Off
Quality - RAW
Flash mode - Not fired
Sequence mode - Single or Timer
Focus mode - One-Shot
Image size - Large
Easy shooting mode - Manual
Digital zoom - None
Contrast - Normal
Saturation - Normal
Sharpness - Low , -32769
ISO Value - 32767
Metering mode - Evaluative
Focus type - Auto
AF point selected -
Exposure mode - Av-priority
Focal length - 18 - 200 mm (1 mm)
Flash activity - Not fired
Flash details -
Focus mode 2 - 65535
Auto ISO - 100
Base ISO - 1600
White Balance - Sunny
Sequence number - 0
Flash bias - 0 EV
Subject Distance - 0
Image Type - Canon EOS 1000D
Firmware Version - Firmware Version 1.0.7
Owner Name -
Camera Serial Number - 2950600230 (AFDE38438)
Camera Temperature - 17 C
Sharpness (1D) - 0
Directory index (450D) - 142
File index (450D) - 1
File number - 000 - 0000
Sharpness (A0) - 0
Thumbnail: -
JpegIFOffset - 38124
JpegIFByteCount - 4087
-Noel

Display a Canon raw file as shot in Aperture?

Similar Messages

Maybe you are looking for