Display a Foto via ArchiveLink

Hi ,
i 've uploaded a Foto , and want to store it in SAP Content Repository, after calling the FM ARCHIVE_CONNECTION_INSERT, i can find the entry in the table TOAHR, but i cant see it in the Infortype 0002.
is there any suggestion, or idee?
Best Regards
Natel
Edited by: Natel Bargach on Sep 8, 2010 10:34 AM

Solved

Similar Messages

How to display document from external archive via archivelink?

Hi,
I would like to display in SAP (via ArchiveLink) scanned document which was stored in an external archive (FileNet). The archive system is connected to SAP via ArchiveLink. However the scanned document isn't stored in the archive system via SAP so I don't know the ARCHIV_DOC_ID. I only know OBJECT_ID as far as the metadata of document is considered.
I tried to use ARCHIVOBJECT_DISPLAY function module with object_id and arvchiv_id but I get the message no. OA512 (Parameter info was not transferred for command docId). I can only display scanned document entering the right value of ARCHIV_DOC_ID parameter. But actually I don't know the value of this parameter from the level of SAP system.
Could anybody give me some clue or hints?
Best regards,
Zacaria

Hi
Just as Fred written SAP needs to be linked to external archiving system by a Contenent Repository (transaction OAC0).
The menu for ArchivLink setting is in customazing:
Was it done that?
Max

Adobe PDF files will not display when called via a link in page (FF 4.01)

adobe PDF files will not display when called via a link in page.
This happens when testing new web page from DWeaver CS5 - all other browser tests are OK (IE9, Safari5.05, Chrome etc.)

[moved to the Adobe Reader (desktop) forum]

How does a Image is linked to a FI Document (via Archivelink)?

For Incoming Invoices, Normally we link to external Image system via Archivelink. Document types are linked to Business Object and thereby the transaction code SOA0. In general, whenever the document is posted via transaction code the link to the image is establised and event ASSIGNED (of object IMAGE) is generated.
Can anybody confirm my understanding?.
thanks.

hi Bhanu,
Can't find ELEM, all the Object Selection listed are:
R3TR PROG Program
R3TR FUGR Function Group
R3TR CLAS Class
R3TR TABL Table/Structure
R3TR VIEW View
R3TR TTYP Table Type
R3TR DTEL Data Element
And also I don't remember the table to find a query GUID based on the query technical name, what is the table? When open it, actually opens another query (with _1 added we used to copy to). You can refer to my previous post about this query: Can't create a new query with an error msg
Thanks

Change/display customizing tables via IMG only - SM31

Hi Experts,
I've posted this message previously in another forum area on SDN. In the absence of a response, I've posted it here, hoping that this is a more appropriate area.
We are attempting to maintain table LRF_WKQU through SM31 in our QA system.
The following message appears:
Change/display customizing tables via IMG only
Message no. SV000
I've also noticed that a number of other tables show the same response.
We are able to perform maintenance of this table in our Production system via SM31.
I've checked the table properties, and they are the same on both systems.
Does anyone know if there is a system setting or such like, that will allow for maintenance of tables via SM31 and not the IMG?
Thanks,
Chris

Why do you want to change customizing tables outside the IMG. In the case of this table LRF_WKQU you mention there are a few more tables which might also be updated when you use the IMG. Without IMG the risk is very big on inconsitencies.
The other tables being updated through IMG (for table LRF_WKQU) are
T346
T346T
T346L
Whe you use SM31 (or SM30), these tabels will not be updated. This does not have to cause a problem, but I think for that reason (because it MIGHT cause a problem). SAP shows you this message.

Mac mini display is flicking via HDMI to DVI adapter and DVI cable

i have received mac mini server (mid 2011) recently. mac mini is connecting the display via HDMI port using DVI cable with a HDMI to DVI adapter.
the display shows constant flicking. white dots/lines show randomly. it is like those signal noise when watching analog TV.
the same display works fine and well with macbook pro (early 2008) via DVI port.
please help. please advise.

So you know the display is working.
It seems to me you have a few possible problems.
1 HDMI-DVI cable is bad
2 DVI-cable is bad
3 Connections between cables or computer or monitor are bad.
4 HDMI port on the computer is bad.
I assume you've tried #3, and re-connected cables and wiggled inputs. So then try replacing 1 and then replacing 2 which are cheaper fixes than replacing/fixing 4.........
FYI, I'm connect my mac mini using the same setup you describe, with no issues....also inspect the cable ends carefully to look for any problems.
jb

Online conference participants hear echo when cinema display is connected via mini-displayport, even though I am using headphones with mic.

When I use Google Hangout or GoToMeeting, other participants in the meeting hear an echo of their sound -- loud and obtrusive. When I mute, it goes away.
This only happens when I am using my Apple Cinema Display 27" (recent vintage) connected via the mini-displayport (natively, not an adapter).
On my end, i don't hear their echo, but I do hear waves of squelching -- basically it sounds like their end is trying to adjust their input down to account for what it thinks I saying, even though I'm not talking, it's just the echo making that happen.
Sometimes this doesn't occur -- it seems to crop up intermittently, but happens around 75% of the time at some point in a conversation.
I am using iPhone-compatible in-ear earphones with built-in mic; the earphones are the rubber seal type, so there's no sound escaping them that the system should even be able to hear.
I have my audio set up for "Headphones" as output device.
Input device is set up as "External Microphone" -- this part confuses me because even though I know my Cinema Display has a microphone, the OS seems not to list it as a separate input device. So I wonder if it's getting confused trying to use both the cinema display's mic *and* the earphone mic? (see dropdown image)
OS version 10.20.2; Macbook Air 13 inch, "early 2014" and Apple LED Cinema Display 27inch
Earphones are skull-candy brand iPhone compatible (with built-in mic), plugged into the macbook air's earphone jack. (without the display connected, this has always worked fine -- and with a prior non-apple display that had no mic/camera this was not a problem)
This is an ongoing issue in our office, in fact ... especially troublesome in client meetings.
I haven't tried other configurations, other than when using the Cinema Display's USB connector, the same thing happens.
It also happens even when I'm not using the "USB PnP Sound Device" you see listed in the dropdown here -- that's something I use for controlling music output to my desk speakers.
A general question: is there no way to control the cinema display's mic and/or camera more directly?
(EDITED TO ADD: Ok I see in the Cinema Display manual, there should be a listing for "Display Audio" in the input list, but my SysPref panel has none listed. See other screenshot. I wonder if this is the problem??)

Curious, is the 30-inch Cinema Display you have, one listed in this Support Article:
•Apple Cinema Display (20-, 23-, and 30-inch DVI) - Technical Specifications
or is yours a later build series; which one do you have...? This says Mini unsupported.
The specifications vary across the line of Displays, as do the graphic support in Macs.
I'd suspect your version is a later 30-inch display, but it may be one of these. And a
newer 27-inch Display has the Thunderbolt cable.
In any event...
Good luck & happy computing!

HT202856 Can the Mac Mini (Late 2014) support 4k display @ 60 Hz via the DisplayPort?

Dear Experienced Apple Guru,
Apple made it clear on the Tech Specs for the Mac Mini (Late 2014) that a 4k display can be supported via the HDMI port at 30 Hz. But, can we also be clear how many Hertz the Mac Mini can handle with a 4k display via the Mini DisplayPort (Thunderbolt 2)?
I have a site linked here saying that the DisplayPort 1.2 can handle up to nearly 20 Gbps, thus can handle 4k display at 60 Hz:
"DisplayPort version 1.2 can support video resolutions of up to 3840 x 2160 pixels (4K) at a refresh rate of 60 Hz, and it supports all common 3D video formats. In terms of bandwidth, it can manage 17.28 Gbps. Version 1.3, when it arrives, will support up to 8192 x 4320 (8K) resolution, or two simultaneous 4K streams. It will also double bandwidth to 32.4 Gbps.
Meanwhile, HDMI version 1.4 is the most common at the moment. This supports the same 4K resolution as DisplayPort 1.2, but at just 30 Hz (or 4096 x 2160 at 24 Hz). HDMI 2.0 is new on the scene in a few devices such as this Sony TV. This doubles the refresh rate to 60 Hz as well as increases bandwidth from 10.2- to 18 Gbps."
Thanks,
Trevalyn

That have enabled DP 1.2 on their monitor and used a DP 1.2 cable but still only get 30 Hz at 4K.
The MAC does not support MST

Can Premiere Pro display multiclip angles via transmit to an external monitor?

Hello Forum,
Is it possible to have the angle view of multicamera viewable via transmit to an external monitor? (via Blackmagic Intensity Pro)
Currently, it only displays the active angle.
Thanks all!
- Ryan

I've seen informational programs on working in an editing/grading suite with clients, even to doing so with say a client and the editor on one continent, and the colorist on another continent, with screen-sharing programs. Setting up to do that they had one monitor for their basic controls, a program monitor, and a larger (and spendy) b-cast quality monitor for the person running the station, and another monitor set to the side that could be switched to either show the b-cast monitor signal or program monitor OR the basic controls, depending on what they needed to show to the client. And this one was typically a calibrated but nowhere near as expensive monitor as the "working" monitors.
Neil

Problem displaying Web charts via Excel 2003

Hello,
While displaying a Web template via a hyperlink in <b>Excel 2003</b> (the hyperlink contains the template's URL), all charts in the template aren't displayed. The small red x appears in the chart's area. Charts are displayed only after refreshing the browser.
Same scenario works fine with Excel XP !!!
No problem occures when openning the same URL directly in the browser, so I guess the problem relates somehow to the hyperlink.
Any ideas?
Thanx.

Strange...
I can think of a hack: Have an intermediate html page that gets displayed first anytime the display type (html/xls) is changed. Just a blank html page with a redirect that directs to the source you really want to display.
Should be transparent, and it should clear up your problem as you described it.

Receiving and displaying XML data via HTTPService

Hi folks. I am a pretty experienced database programmer, I
work with a software called Magic eDev, but I'm a complete newby in
Flex.
I am trying to use Flex 3 to create a web / client interface
for an application written in Magic eDev. I've made a very simple
Flex App to read an XML file generated by another application
written in the third party software (Magic eDev 9.4) via
HTTPService. I think I have the HTTPService request part figured
out, This little Application does not cause any errors in Flex.
However, I am not seeing my data in the display. If I manually try
the URL query to the Magic App, I do get the XML file with the data
in it, but Flex doesn't seem to see anything.
I just want to get two fields via the HTTPService data and
display them, but I'm not getting any result. I can't even tell if
Flex is actually querying Magic or not. Can anyone explain what I'm
doing wrong?
Also, is there some way to monitor what the Flex app is doing
when you run it, as you can in some other systems?
Here is my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical"
verticalAlign="middle"
backgroundColor="white">
<mx:Script>
<![CDATA[
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
private function serv_result(evt:ResultEvent):void {
var resultObj:Object = evt.result;
userName.text = resultObj.catalog.username;
emailAddress.text = resultObj.catalog.emailaddress;
private function serv_fault(evt:FaultEvent):void {
error.text += evt.fault.faultString;
error.visible = true;
form.visible = false;
]]>
</mx:Script>
<mx:String id="XML_URL">album.xml</mx:String>
<mx:HTTPService id="loginService"
url="
http://localhost/magic94scripts/mgrqcgi94.exe"
method="POST"
result="{ResultEvent(event)}" fault="{FaultEvent(event)}">
<mx:request>
<appname>FlexDispatch</appname>
<prgname>Test</prgname>
<arguments>username,emailaddres</arguments>
</mx:request>
</mx:HTTPService>
<mx:ApplicationControlBar dock="true">
<mx:Label text="{XML_URL}" />
</mx:ApplicationControlBar>
<mx:Label id="error"
color="red"
fontSize="36"
fontWeight="bold"
visible="false"
includeInLayout="{error.visible}"/>
<mx:Form id="form"
includeInLayout="{form.visible}">
<mx:FormItem label="resultObj.catalog.username:">
<mx:Label id="userName" />
</mx:FormItem>
<mx:FormItem label="resultObj.catalog.emailaddress:">
<mx:Label id="emailAddress" />
</mx:FormItem>
</mx:Form>
</mx:Application>
This is what the XML file looks like:
<?xml version="1.0" ?>
- <catalog>
<username>DaveID</username>
<emailaddress>DaveName</emailaddress>
</catalog>

I'm sorry to be a pest but this link doesn't seem to work!! I
keep getting this error:
A system error has occurred - our apologies!
Please contact your Confluence administrator to create a
support issue on our support system at
http://support.atlassian.com
with the following information:
a description of your problem and what you were doing at the
time it occurred
cut & paste the error and system information found below
attach the application server log file (if possible).
We will respond as promptly as possible.
Thank you!

Steps to retrieve attachments from a storage system linked via ArchiveLink.

Dear experts,
I want to retrieve the documents stored in a storage system linked to SAP via the archivelink and show it in a webdynpro application(Adaptive RFC).I need to know the right approach to do so.I am searching for a funtional module which can fetch me the documents from the data storage.The stored documents are linked to business object type BUS2104.
I'll appreciate any help.
Thanks,
Karambir Singh

Tortsen,
I tried the solution suggested by you.Here's what i did :
I executed the ARCHIV_GET_CONNECTIONS with input field OBJECTTYPE values as BUS2104.It gives me some entries in the output connections table.From the results , i picked up the ARCHIV_ID and ARC_DOC_ID fields as suggested by you.
I went to execute SCMS_AO_TABLE_GET with above two values as import parameters and COMP_ID = "data".But it does not give me any output.It says "HTTP error: 404 Not Found". Any idea why is it so?
Then i went to try SCMS_DOC_URL_READ .I find here that there are two mandatory parameters viz . STOR_CAT , DOC_ID.I tried giving the ARCHIV_ID value above as value for STOR_CAT . But it does not recognize it.Then i went to the table SDOKSTCA to look for any valid values for STOR_CAT , but i am not sure which one applies to my scenario.How do i find this?
i'll appreciate any help.
Thanks,
Karambir Singh

How send PO display as link via email

Hello,
I got requirement. whenever a new PO is getting created, we need to notiyfy list of users via email. email content should have a link to PO display. so whenever user logs into his outlook/lotus notes and clicks on the PO display link, it should take him to corresponing PO.
How to acheive this via email. please help me out with some solutions.
PS:
its not a action(workitem), its via email.
Regards,
paris
014 260 3230

Purvesh,
my requirement is just send a link ( PO display ) as mail..
ex:
hello Arun,
please click on the PO number to view the PO .
180000023
Once user clicks on the link, it should take him to R/3 system. basically it should call ME23 transaction from outlook.
Hope this clears you my requirement?

Send current displayed browserpage/iview via link as email-attachment

Hello,
I´m new in this forum and have a question concerning an iView / page which is displayed in the browser. Can I set a link in the iView (JSP) which sends the current displayed browserpage as email-attachment? I know how to do "normal" e-mail-links in HTML:
Link
How can I attach the current iView/page using JavaScript?
Would be very thankful for any help here!
Heinz

Hi Heinz,
first, welcome on SDN!
Abut your question:
No, it is not possible to attach something to a mail constructed via JavaScript. And you won't be able to pass the page content.
What you could do is to pass the NavigationTarget as subject or body of the mail to be constructed. The Navigation Target has to be rendered on server side, for the JS see http://www.ianr.unl.edu/internet/mailto.html
Hope it helps
Detlev
PS: Please consider to reward points on SDN for helpful answers. Thanks in advance!

Satellite L500: unable to change to Multiple Display to play via TV

Having followed instructions to connect laptop to TV via HDMI there is no signal. Followed instructions in User Manual but
User Manual says go to Adjust Resolution/Advanced/GenericPnPMonitor/Graphics Properties/Display Properties then click 'Multiple Display' but there is only one drop down option 'Single Display' and 1 primary device the notebook.
When I toggle FN F5 to change display it only shows LCD display.
Is this something simple I'm missing or does this suggest a fault with the Toshiba Display Driver?
Thanks

Hi
For I using the HDMI connection I can recommend this:
Firstly connect the cable to your notebook and TV or external monitor. Then power on the TV and choose the right input channel. Finally power on the notebook and normally the HDMI connection will be recognized automatically.
If it doesnt work I would recommend updating the display driver and BIOS. Both can be founded on the Toshiba website.

Display a Foto via ArchiveLink

Similar Messages

Maybe you are looking for