Display a table vertically in APEX
Hi Everybody, I am a developer and new to Oracle APEX. I have the below requirement. Anybody can Please help me asap?
I want to display a table vertically in my page. But Whatever i try, the table displays Horizantal only.
My requirements in pictorial as below. Thanks.
Emp name Joseph Ben Princess Robert
Age 21 26 20 41
Sex Male male female Male
Your help very much appreciated.
If you're on database version 11g try a pivot table. http://www.oracle.com/technology/pub/articles/oracle-database-11g-top-features/11g-pivot.html
If your not yet on 11g this discussion shows an alternative way to create a pivot table. http://asktom.oracle.com/pls/asktom/f?p=100:11:0::NO::P11_QUESTION_ID:766825833740
Similar Messages
-
Deleting Multiple Rows From Multiple Tables As an APEX Process
Hi There,
I'm interesting in hearing best practice approaches for deleting multiple rows from multiple tables from a single button click in an APEX application. I'm using 3.0.1.008
On my APEX page I have a Select list displaying all the Payments made and a user can view individual payments by selecting a Payment from the Select List (individual items are displayed below using Text Field (Disabled, saves state) items with a source of Database Column).
A Payment is to be deleted by selecting a custom image (Delete Payments Button) displayed in a Vertical Images List on the same page. The Target is set as the same page and I gave the Request a name of DELETEPAY.
What I tried to implement was creating a Conditional Process On Submit - After Computations and Validations that has a source of a PL/SQL anonymous block as follows:
BEGIN
UPDATE tblDebitNotes d
SET d.Paid = 0
WHERE 1=1
AND d.DebitNoteID = :P7_DEBITNOTEID;
INSERT INTO tblDeletedPayments
( PaymentID,
DebitNoteID,
Amount,
Date_A,
SupplierRef,
Description
VALUES
( :P7_PAYMENTID,
:P7_DEBITNOTEID,
:P7_PAID,
SYSDATE,
:P7_SUPPLIERREF,
:P7_DESCRIPTION
DELETE FROM tblPayments
WHERE 1=1
AND PaymentID = :P7_PAYMENTID;
END;
The Condition Type used was Request = Expression 1 where Expression 1 had a value of DELETEPAY
However this process is not doing anything!! Any insights greatly appreciated.
Many thanks,
Gary....the "button" is using a page level Target,...
I'm not sure what that means. If the target is specified in the definition of a list item, then clicking on the image will simply redirect to that URL. You must cause the page to be submitted instead, perhaps by making the URL a reference to the javaScript doSubmit function that is part of the standard library shipped with Application Express. Take a look at a Standard Tab on a sample application and see how it submits the page using doSubmit() and emulate that.
Scott -
Displaying a Text vertically in report output
Hi All,
We have a requirement to display a field vertically in the XML Report output.
Can anyone please help me with the same.
Regards,
ShrutiYou can do this by putting the field in a table cell. Highlight the cell, right-click, select Text Direction.
-
Automatic Payment program -line item cleared not displaying in table
automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh -
How to display a table after clicking on a chart in ssrs?
Hi all experts,
I need to display a table control after clicking on a chart.
I was looking for the visibility property of the table which can be set based upon click on the bar chart.
Please respond asap...Hi Manisha,
If I understand correctly, you want to control the table visibility through clicking the chart. In this case, please refer to the detailed steps below:
1. Create the parameter named Control, check the Boolean option in the drop-down list of the Data Type, and select Hidden in the parameter visibility tab.
2. Specify the default value of the parameter to True.
3. Click the series in the chart and select “Action” in the Properties pane and click the ellipsis as follows:
4. Select the “Go to report” tab, and select the self-report in the “Specify a report” tab.
5. Pass the parameter as bellows:
Name:Control Vaule:false
6. Right click the table control, select Tablix Properties and select the Visiblity property.
7. Select the tab of Show or hide based on an expression, and add the expression below:
=iif(Parameters!Control.Value=true,true,false)
If you need more assistance, please feel free to let me know.
Regards,
Heidi Duan -
How to display a table control in a report
hi
how to display a table control in a reportcreate a screen in your report.
Call that screen in your report.
While designing your screen, use Table control creation wizard to create table control on that screen.
http://www.planetsap.com/online_pgm_main_page.htm -
Error when displaying the table
hellow,
here i have to .htm pages, in first page i am entering the table name, and it has to display the table details in second page.
but in second page i am getting error like field catalog not found
plz help me.
with regards
babuhi babu rs
Please post the code of the two bsp page with the layout as well as abap code. Only than anybody can help you. -
Error message: when downloading data from 2nd display tag table
I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
How to display a table data on Screen having a Table control
Hi ,
I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this regard.Hi Gayatri,
After creating table control do the following steps.
1. In the flow logic section write the following code:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
LOOP AT I_LIKP WITH CONTROL LIKP_DATA CURSOR LIKP_DATA-CURRENT_LINE.
MODULE ASSIGN_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.
LOOP AT I_LIKP.
ENDLOOP.
I_LIKP is the internal table which is used to display table data in the table control.
2. In Process Before Output, in the module STATUS_0200 write the following code:
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
In Process After Input, in the module USER_COMMAND_0200 write the following code:
CASE SY-UCOMM.
WHEN 'LIPS'.
READ TABLE I_LIKP WITH KEY MARK = 'X'.
SELECT VBELN
POSNR
WERKS
LGORT
FROM LIPS
INTO TABLE I_LIPS
WHERE VBELN = I_LIKP-VBELN.
IF SY-SUBRC = 0.
CALL SCREEN 200.
ENDIF.
WHEN 'BACK'.
SET SCREEN 200.
ENDCASE.
In Process Before Output and in the module ASSIGN_DATA which is there inside the loop write the following code:
MOVE-CORRESPONDING I_LIKP TO LIKP.
So, Totally your flow logic code should be like this.
TABLES: LIKP, LIPS.
DATA: BEGIN OF I_LIKP OCCURS 0,
VBELN LIKE LIKP-VBELN,
ERNAM LIKE LIKP-ERNAM,
ERZET LIKE LIKP-ERZET,
ERDAT LIKE LIKP-ERDAT,
MARK TYPE C VALUE 'X',
END OF I_LIKP,
BEGIN OF I_LIPS OCCURS 0,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
END OF I_LIPS,
FILL TYPE I.
CONTROLS: LIKP_DATA TYPE TABLEVIEW USING SCREEN 200,
LIPS_DATA TYPE TABLEVIEW USING SCREEN 300.
DATA: COLS LIKE LINE OF LIKP_DATA-COLS.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'LIKP'.
SELECT VBELN
ERNAM
ERZET
ERDAT
FROM LIKP
INTO TABLE I_LIKP
WHERE VBELN = LIKP-VBELN.
IF I_LIKP[] IS INITIAL.
CALL SCREEN 200.
ENDIF.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module assign_data OUTPUT
text
MODULE ASSIGN_DATA OUTPUT.
MOVE-CORRESPONDING I_LIKP TO LIKP.
ENDMODULE. " assign_data OUTPUT
*& Module STATUS_0200 OUTPUT
text
MODULE STATUS_0200 OUTPUT.
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
WHEN 'LIPS'.
READ TABLE I_LIKP WITH KEY MARK = 'X'.
SELECT VBELN
POSNR
WERKS
LGORT
FROM LIPS
INTO TABLE I_LIPS
WHERE VBELN = I_LIKP-VBELN.
IF SY-SUBRC = 0.
CALL SCREEN 200.
ENDIF.
WHEN 'BACK'.
SET SCREEN 200.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
Save and Activate the program along with the screen in which you have included table control.
Hope this will help you.
Regards
Haritha. -
In PSE 7, how can I rotate my video, which displays sideways, to vertical?
How can I rotate my video which displays sideways to vertical in PSE 7?
It's a waterfall, I filmed it vertically, but it displays horizontally. Full Edit doesn't work on film clips and the rotate option is greyed out.
Thanks for any feedback.
KathrynPSE 7 is Ps Elements, not Photoshop. Try posting in the Photoshop Elements forum, as not many users here are familiar with Elements.
http://forums.adobe.com/community/photoshop_elements?view=discussions -
What is the right way to display a table in Java web dynpro using a node.
Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt. -
Dynamic table owner in apex 3.0 and Oracle 10g
I have an application that requires bulk deletes for all rows in a particular department. The application edits incoming data and then moves final approved data to the 'production' db. End users modify their data via bulk load until they are happy with validity checks. At certain times of the year this could be as many as a million rows in a single table with referential integrity deletes in up to 5 additional tables. This generates unnecessary redo and archive logs so I thought we might just create separate schemas for each department (11) and do DROP/CREATE table instead.
The problem is that I see no way to dynamically change the table owner in ApEx. Is there any way to do this short of export/import to a 11 different parsing schemas?...I thought we might just create separate
schemas for each department (11) and do DROP/CREATE
table instead.Instead of doing drop/create on your tables just do a truncate on the table.
>
The problem is that I see no way to dynamically
change the table owner in ApEx. Is there any way to
do this short of export/import to a 11 different
parsing schemas?You may try creating your tables as follows
CREATE TABLE dept1.table_a AS SELECT * FROM old_table WHERE dept=1;
CREATE TABLE dept2.table_a AS SELECT * FROM old_table WHERE dept=2;
Then investigate using UNION logic and possibly a flag to show/hide departments...
SELECT * FROM dept1.table_a WHERE dept=1 AND :P1_FLAG=???;
UNION
SELECT * FROM dept2.table_a WHERE dept=2 AND :P1_FLAG=???;
The above union logic may work for reporting needs but would likely not work for your maintenance pages where you need to insert/update/delete...
Message was edited by:
tfa -
JTable display colmun name vertical
Hi,
i have to display a JTable, but the column width is small and the colmun heading has lot of text and so cannot fit , is there a way i can increase the height of the column header and display the text vertically,
just like we can do in Exceel sheet...
any hint or code will be appreciated
AshishTryadd (new JScrollPane (createTable ()));or add the header separately.
Kind regards,
Levi -
Need to display Internal table records on screen without using table contro
Hi Experts,
I have a requirement to display internal table on screen which is having three columns (Material no, Serial No and quantity).
But I can't use table control as it is not supported by hand held devices.
They are going to use this transaction on hand held devices.
Thanks In advance.
GauravYou should be able to use the good old STEP LOOP processing for this... create your three fields in the row then convert them to a STEP-LOOP.
You can look up in the help how to work with STEP-LOOPs if you are not familiar with it. It was the way to manage table-like information before the age of table controls -
How to display all tables residing in my database
i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanyauser11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
'VARCHAR2',data_type||'('||to_char(data_length)||')',
'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
null,data_type,
data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
data_type) type,
nullable
from all_tab_cols
order by table_name, column_id
Maybe you are looking for
-
How can I share my itunes libraries between two users on different log ins on the same PC?
Ive recently bought my wife and iPhone 4, and we have a shared library. But she clearly downloads her own apps and music choices direct from the store to her phone, so wants to maintain her own log in etc. How can I share the library in my iTunes on
-
I just got an HP Stream 8 tablet with Windows on it. I have a Mac desktop running 10.6.8. I set up Home Sharing by making sure both had the same version of iTunes and I authorized the new tablet (desktop already was). (I haven't exceeded the numbe
-
How come I can't up date my iWeb 1.1.2 to 2.0.3?
so I downloaded the 2.0.3 update from apple downloads page, and i opened the installer. but it said "An eligible iWeb application was not found in the location /Applications." even though iweb was in my applications folder. how can i solve this?
-
Received hand me down. how do i unlink from previous owner to download new music?
I received a shuffle from a friend. He had already downloaded songs and set up the shuffle on his computer. How do I change all the info to personalize for myself?
-
I need to know how to clean out my old cloud and start fresh one?