Display account class field in view

Hi All,
I want to display account class field in a view in ICWEB client but the field is not there in any of the BOL entities. In backend this field is shown in IC win client under, contract account general data. How can i integrate this field into my view?
With Advance Thanks,
Sujith

Hi Manuel,
Thank you for the reply. I am working in CRM ISU. The CRM is in one server and ISU is in another. While i run transaction CIC0 in ISU there is a field "account class" (Possible values for the field are:- Residential customers , Open group deals, large acconts) under contract account general data. When i check for this field in BOL entities in CRM system i cant find it any where. My requirement is to display this field in BuPaMorefields view in ICWEB client. I think now its clear .
With Advance Thanks,
Sujith

Similar Messages

Pop up Windows that display outside the field of view.

I frequently connect multiple monitors to my laptop and it seems that some software "remembers" the location where it last displayed a pop up window. For example: The first time I access a function that displays a pop up window it will display
on my main display which I then drag to one of the additional displays I have connected. The next time I access that function it will automatically appear on the additional display that I last dragged it to. The problem is that if I access that function
when I don't have an additional display connected the pop up still behaves as though I do. I'm unable to see or access the pop up which is particularly problematic if the pop up is displaying a question that I must answer to continue. How do I correct this
issue? Are there any hotkeys to remedy this?

Connecting and disconnecting displays while the laptop is on can cause these issues. For best practice, have the laptop powered off when connected to the monitor and then power it up. To disconnect the monitor, power down the machine and disconnect.
Don't forget to mark the post that solved your issue as "Answered." By marking the Answer you are enabling users with similar issues to find what helped you. Lewis Renwick - IT Professional

Custom field in Account Master Data Tcode BCA_CN_ACCT_03 - Display Account

Hi all,
I want to add a custom field in Basic Data tab of display account screen : Tcode BCA_CN_ACCT_03.
Please give step-by-step solution.
Points assured!
Jogdand M B
Edited by: Jogdand M B on May 19, 2008 5:36 PM

Solved by myself
I write here the response because I didn't found it anywhere:
When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

Field of view: in the programme bigger than on the camera display

The following problem occured:
When I captured footage into Adobe Premiere Elements I recognized that the field of view in the programme was bigger than the one I saw on the display of my camera. I mean, there were objects in the left and in the right corner of the frame, which I did not intend to shoot (and which I did not see in the viewer, as well).
Are there any settings I should consider?
Any answers appreciated.

This is fairly common. Few cameras have 100% view. Some show a bit more, but most a bit less.
Now, depending on how you are going to output the footage, it might be no problem. If you're going to TV, via DVD, then the overscan of CRT TV's will possibly crop this extra area off. If you are not sure, or your audience will have newer LED/LCD/etc. TV's, you can do one of several things.
1.) Keep things just as they are, and use the Garbage Matte to eliminate the offending objects. You'll end up with a bit of black, around your final image, unless you have some sort of background behind it.
2.) Keep things just as they are, and use Crop to do about the same. Same result as above.
3.) Use Motion Effect>Scale (and possibly a bit of Position), to enlarge the image to beyond the screen area, approximating what you saw in the viewfinder/LCD. Since you will only be doing a tiny bit of this, quality will not suffer.
Personally, I'd use #3. Trust me, this is far easier in video, than it ever was with film. Without a good budget, it meant a re-shoot, should a mic swing into the frame, or a lightstand peek in at the corner!
Good luck,
Hunt

Account Name field of 4663,4660 displays System Account(FileServer$) instead of userName when Deleting a Folder

Account Name field of 4663,4660 displays System Account(FileServer$)
instead of userName when Deleting a Folder :
A Folder with files & subfolders are deleted.The following sequence events 4656,4663,4660,4658 are logged for parent folder,subfolders
and files in the security event log.For parent folder and subfolders events, the Account Name field of event id 4656 displays the user who deleted the folder,but the Account Name field of event id 4663,4660 diplays the SYSTEM account ie)FileServer Name instead
of username.This is not occuring for files inside the subfolders
Actually we correlate 4663,4660 with handle id and process id to make sure the file/ folder is deleted.Using this above correlation we
can not able to find out user ,because it shows servername$ for folder deletions not files.So my question is why windows logging servername$ in 4663,4660 events only for folder deletions.
The above issue happening only for
* parent folder and sub folders and not for files inside them.
* deletion through network share and not locally.
Sample Events of 4656,4663,4660
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4656
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01.test.com
Description:
A handle to an object was requested.
Subject:
Security ID: S-1-5-21-34352134455-267854504-159913591-49381
Account Name: vijay
Account Domain: test.com
Logon ID: 0x7e95119f
Object:
Object Server: Security
Object Type: File
Object Name: \Device\HarddiskVolume4\ShareA\testFolder
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Access Request Information:
Transaction ID: {00000000-0000-0000-0000-000000000000}
Accesses: DELETE
Access Mask: 0x10000
Privileges Used for Access Check: -
Restricted SID Count: 0
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4663
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01.test.com
Description:
An attempt was made to access an object.
Subject:
Security ID: SYSTEM
Account Name: FS01$
Account Domain: test.com
Logon ID: 0x3e7
Object:
Object Server: Security
Object Type: File
Object Name: \Device\HarddiskVolume4\Shared\testFolder
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Access Request Information:
Accesses: DELETE
Access Mask: 0x10000
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 11-09-2012 20:03:41
Event ID: 4660
Task Category: File System
Level: Information
Keywords: Audit Success
User: N/A
Computer: FS01
Description:
An object was deleted.
Subject:
Security ID: SYSTEM
Account Name: FS01$
Account Domain: test.com
Logon ID: 0x3e7
Object:
Object Server: Security
Handle ID: 0x7498
Process Information:
Process ID: 0x4
Process Name:
Transaction ID: {00000000-0000-0000-0000-000000000000}

HI,
When you configure the Auditing Entry for the user account on the shared folder, if the setting is Files only, it might be the cause of your problem . If so, you can try to configure "Apply onto" as The folder, subfolders and files.
Best regards, Jason Mei Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Search help for 'Account ID' field in 'Identify Account' section

Hello all,
We are on CRM 5.0.
I want to attach the search help 'BUPA' for the 'Account ID' field in 'Identify Account' view of IC Webclient.
Can you please let me know how I can achieve this.
Regards,
Nag

Hello Glenn,
Thanks for the reply.
Let me rephrase my question.
Account ID is already there as a search field. But I want to add F4 search help for this field.
So when the user hits F4 key, the system should display the 'BUPA' search help so that user can search for the BP number by name, zip code etc.
So I want to attach the search help 'BUPA' to the 'Account ID' field in the screen.
Can you please let me know how to do that?

Displaying TPM header fields on assignment block - CGPL/IBOM Framework

Hello Folks,
Our system is on CRM 7.0. The requirement I have at hand is to display 2 addtional fields 'Status' and 'Tactic' from the Trade Promotions Header on the 'Trade Promotions' assignment block on the Agreements Overview page.
UI Component - agroe
View - AGROE/TradePromotion
These fields are already existing on the Trade Promotion Overiew page and are part of the TPM header.
What I did till now is,
1. Used trasnaction CRMC_MKTIB_IL_CUSTOM and under application CRMD_MKTPL changed the attribute structure of the Node MKT_AGR_TPM from CRMS_MKTPL_IB_AGR_TRADE to ZCRMS_MKTPL_IB_AGR_TRADE. I have copied ZCRMS_MKTPL_IB_AGR_TRADE from the original structure and added two new fields for STATUS and TACTIC.
2. On the View configued the two new fields.
But the values are not showing up on the assignment blocks.
This query I guess boils down to the CGPL/IBOM Framework. Could someone please suggest the steps I need to enable the two fields on the assignment block? If anyone has pointers to information on CGPL/IBOM Frameworks please also share the same.
Thanks & Regards,
Gaurav
Edited by: Gaurav Walia on Oct 18, 2009 12:24 PM

Hi Gaurav,
Initially I thought that the issue can be that you just replaced the Assigment structure, but the Model Collection, Item and Persistency Class methods may still be using the same structure CRMS_MKTPL_AGR_TRADE in the methods. But that is not the case as they are mostly not redefined.
(Anyhow, you have to debug methods FETCH_DB,MOVE_DB_STRUCT_2_ATTR, MOVE_ATTR_2_DB_STRUCT of class
CL_CRM_MKTPL_ASSIGN_TPM_PERS to validate the dataflow.)
Did you maintain the same in IBOM customizing?Check TCODE;CRMC_MKTIB_IL_CUSTOM.
The IBOM Collection Class CL_CRM_MKTPL_IB_AGR_TPM_COLL is using structure CRMS_MKTPL_IB_AGR_TRADE in some of the methods.All these things need to be taken care of.
Personally, I would have tried to create a new relation with same cardinality and key fields and tried to map the same onto UI,as substituting standard IBOM structures and classes may create issues for me in future.
Regards,
Masood Imrani S.

Display sales area data in view mode?

Hello,
we use CRM 7.0 with the WebUI. In Account view we have the assignment block of sales area data. but in this assignment block we only have the possibility to open the sales area data in Edit mode.
Is there a way to open the sales area data in view mode and if how does it work?

Hi Fabian,
If you see this block as delivered by SAP, its in display mode with possibility of edit( button to edit ). If you want to take out this button/disable this button then you will have to redefine GET_OCA_T_TABLE from IMPL class of respective view ( BPSALES/CorpAccountSalesAreasOV) also you will have to remove buttons for adding new entry by redefining DO_PREPARE_OUTPUT.
Regards,
BJ

Stock account currency field in MB5L report

Hi!
can any one tell me in MB5L report for field materials currency and stock account currency, from system will pick up the values?
I think materials currency field will pick up from GL accounts?
But stock account currency, from where it will pick up value?
regs,
ramesh b

Hi!
both are not GL account balances.
I have studied the report and understood.
the material currency field: just it will take total stock avialable * std price/MAV price ( it will be equal to value in material master, MB5B, MB51 )
the stock account currency field: it will take GL account balance via valuation class ( OBYC setting BSX)
Here for example if you select only one material in MB5L report , it won't show the GL balance pertaining to that material, it will simply show the total GL balances that means system won't check material number existed in line items ( BSEG table).
any way thanks for your inputs.
regs,
ramesh b

How do I increase the field of view in Measurement and Automation Explorer (MAX) Version 3.1.1.3003

I am using Measurement and Automation Explorer Version 3.1.1.3003 to view pictures on a pc that are being sent from a video camera looking through a microscope. The image I see in the viewfinder of the microscope is MUCH smaller than the image that is displayed on the pc screen. Looking through the viewfinder of the microscope, I can see ~20 mm across the object, but the display from the camera in NI-MAX shows ~4.5 mm across the object. How can I change how much of an object is displayed on the screen in NI-MAX?
The camera is attached to the microscope with a camera adapter on the top of the microscope. The lenses the camera "looks" through and the lenses used when one looks through the viewfinder are the same, so theoretically, there should be no difference in what is displayed on the pc and what is seen through the viewfinder. We have ruled out the microscope and camera as the cause of the problem, which narrows it down to the NI-MAX software itself.
I saw in the forums that you can zoom out on an image; however, this does not change the distance across an image that is seen, just makes the picture of the same ~4.5 mm across the object smaller in size.
Any ideas or suggestions?

I have attached a picture of the object's image being displayed on the pc monitor. Where the field of view (FOV) in the microscope is almost 30 mm, the FOV displayed onscreen is about 7 mm. After contacting companies various times I discovered there was a reducing lens that goes in the C-mount adaptor, but it is over $300.
I thought maybe that the FOV could be changed in in NI Measurement and Automation Exploer (NI-MAX). Any ideas?
Attachments:
field of view.png ‏2437 KB

Sales Analysis Report Additional Field for viewing

Good Day Experts!
Is it possible for us to display an additional field to be viewed in Sales Analysis Report?
I'm talking about a vacant field from BP Master data, and somehow append it into form settings and put it into the report?
Is there any store procedures that we can look for prior to this matter? Our client need something more on that particular issue.
Thank you very much

Hi Elmar,
It is not possible to add field on SAP sales analysis report , but you can create report based on query with required fields.
Check http://wiki.sdn.sap.com/wiki/display/B1/D-SLSalesARModuleSQLPostedto+Wiki link for some sales queries , it might help you.
Thanks,
Neetu

Script to set display name in iCS Calendar view to the LDAP CN

Script to set the display name in the Calendar view for iPlanet Calendar
Server(iCS) to the LDAP common name(CN)
By default, iCS uses a user ID(uid) based on an employee number, rather than on
an employee's first and last name, as the calendar ID(calid).
The current release of iCS (5.0 P2) does not create a display name for a
calendar when a user enables a calendar by logging in; by default, it will
list the calid again in the Display Name field of the Calendar view.
For example, if an employee has a calid of "12345," when you click the
Calendar tab to view the calendar, the Display Name will appear as follows:

12345 (12345)

A problem arises when a user tries to subscribe to another user's calendar.
Although the search criteria are based on the calid and the Display
Name, the only information currently stored in the calendar database is the
calid. Therefore, users will be unable to subscribe to another
user's calendar unless they know the calid of that person. The next
patch release for iCS will remedy this problem by using common names(CNs) as
the Display Names. That is, the database will store the CN values
from LDAP for users, and the Calendar view will appear something as follows:

12345 (John Doe)

Until this next release of iCS, there are two options to work around this
problem.

<OL>
<LI>You can "provision" users by running the cscal
administrative utility with the
Display Name option.

OR

<LI>If the user community already exists, you can use the sample Perl script
below to search through the calendars of users.

Note: If a default calid exists that doesn't have a Display Name, the script
will search the LDAP directory to find a CN to set as the Display Name for
that calendar.
</OL>

<HR>

Sample Perl Script:
#!/bin/perl5.004
sub TRUE {1}
sub FALSE {"}
$SIG{INT} = 'handler';
$SIG{QUIT} = 'handler';
$mypath = $ENV{'LD_LIBRARY_PATH'};
$savepath = $mypath;
$ENV{'LD_LIBRARY_PATH'} = $mypath.';.';
#--------------INITIALIZATION----------------
$host="ldaphost";
$base_dn="ou=People,o=iplanet.com";
$port=389;
$auth_dn="cn=Directory Manager";
$auth_pwd="password";
$found_confile = TRUE;
$default_cal = FALSE;
open(CSCAL,"./cscal -v list |");
while($cal_list = <CSCAL>)
if ($cal_list =~ m/: owner=/)
@calid = split(' ',$cal_list);
chop($calid[0]);
print "\ncalid: $calid[0] ... ";
$default_cal = TRUE if ($calid[0] !~ m/:/);
} elsif (($default_cal) && ($cal_list =~ m/^ name=([a-zA-Z ]*)/)) {
chomp($1);
print "cal name: $1";
if (($1 EQ ") || ($1 EQ $calid[0]))
open(LDAPSEA,"./ldapsearch -h $host -p $port -b \"$base_dn\" -D
\"$auth_dn\" -w \"$auth_pwd\" uid=$calid[0] |");
while($ldap_list = <LDAPSEA> )
if ($ldap_list =~ m/^cn: ([a-zA-Z ]*)/)
chomp($1);
`./cscal -n "$1" modify $calid[0]`;
print "The display name for $calid[0] is being modified to be: $1\n";
sleep(1);
close(LDAPSEA);
$default_cal = FALSE;
close(CSCAL);
sub handler
local($sig) = @_;
print "... Caught a SIG$sig--closing down shop\n";
close(CSCAL);
close(LDAPSEA);
exit(0);
}

anne wrote:
Hi David,
About your confuse about"case when 1=2 then "product_d"."name" else "calendar_d"."year" end".
You can try in your locale.
You will find they are different.
BASED ON THAT you have two table product_d and calendar_d AND they are related by one Fact table.
THEN When you type in
"case when 1=2 then "product_d"."name" else "calendar_d"."year" end"
AND
"calendar_d"."year",
IT WILL SHOW U TWO different RESULTS.
I need to show year which its related product is not null. but I cannot use SHOW->SQL RESULTS->TYPE SOME "WHERE..." because I also need to use "constrain"..
That why I choose to use a case when function..
So, do you have any idea about this?
Regards,
AnneWhy not use two filters in your request? Have something like this:
product_d.name IS NOT NULL
AND
calendar.year IS PROMPTED?
...instead of using a CASE statement? This way you can have both filters show the way they should in a meaningful way.

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to remove fields from view V_QCMBSEG for table BSEG

Hi
By mistake have appended 5 fields in standard table BSEG, after that i have deleted that appended structure from table, while deleting from different views network got disconnected i lost connection from server.
So process get terminated and those fields left in view V_QCMBSEG.
Because of this table partially activated.... is there any way to delete it
Thanks

its not activating ...its displaying error
Field BSEG-ZZCHANNEL is still being used as a view field in view V_QCMBSEG
Field BSEG-ZZPROD is still being used as a view field in view V_QCMBSEG
Field BSEG-ZZPROJ is still being used as a view field in view V_QCMBSEG
Field BSEG-ZZRECODE is still being used as a view field in view V_QCMBSEG
Field BSEG-ZZSTATE1 is still being used as a view field in view V_QCMBSEG

How to display/create Local field in SAP query

HI All,
I'm new to abap query. I have to include a local field in the existing query. I know through SQ01->Edit->Local field we can display the Local fields, but the options under Local Fields menu option are disable even in change mode of Query.
So, later through SDN found that, I have to Switch On the short names menu option. Even the sub-options in Short Names are disabled.
Can any body please let me know how can we display the local fields to the change the formula and how can we create the new local fields in the existing qeury.
Hope I'm able to explain my issue clearly.
Thanks in advance.

You can create the local fields in the "Select Field" screen. (Third screen after "Title, Format" and "Select Field Group") This option is disabled on the other screens. 
 
Reference : <a class="jive-link-external" href="http://help.sap.com/saphelp_NW70EHP1/helpdata/en/d2/cb4186455611d189710000e8322d00/frameset.htm" target="_newWindow">Defining Local Fields</a> in <a class="jive-link-external" href="http://help.sap.com/saphelp_NW70EHP1/helpdata/en/d2/cb3efb455611d189710000e8322d00/frameset.htm" target="_newWindow">SAP Query</a>. 
 
Regards, 
Raymond

Display account class field in view

Similar Messages

Maybe you are looking for