Display acting up - desktop shifting, everything is blurry
my display is acting up
I just rebooted my 15" mbp (2ghz intel core duo, 1.6 gb ram) and suddenly large areas on screen (but not everything) is slightly blurry. I am running osx 10.4.10 at 1440x900px resolution. I already rebooted and the problem, which only showed up after rebooting, is persisting. my desktop background also keeps shifting a couple pixels up, down, left or right every few seconds.
anyone know what happened? how do I fix this?
unreal... you were completely right. never even knew about that option.
thank you
Similar Messages
-
I'm on a Mac book Pro I've recently purchased, and I've just purchased and downloaded the creating cloud suite CS6 and I'm horrified to discover that the entire screen display on each of the programs in blurry! the text around the edges are hard to read and of course that means when I bring a picture in or put up some text its all blurry too, its impossible to work. Please help I'm a student and can't afford this.
In CS6 only Photoshop and Illustrator have Retina support after installing the respective updates. Otherwise you have to live with it.
Mylenium -
[FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...
Hello Community!
For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
PROBLEM:
The desktop is shifted left off the screen, round about 100 Pixel.
It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success.
So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
HARDWARE
The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
. Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
. North Bridge: nVidia® C51PVG Chipset
. South Bridge: nVidia® MCP51 Chipset
. Graphics is Integrated NVIDIA GPU GeForce 6150 LE
. VGA, SCART and HDMI - Connectors
The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
INSTALLATION HISTORY
2012-12-30 + Installation according ArchLinux install guide
2012-12-31 + pacman -S openssh
systemctl start sshd
2012-12-31 + pacman -S btrfs-progs
2012-12-31 pacman -S sudo
2012-12-31 + sudo pacman -S bash-completion
2013-01-03 + pacman -S rsync wget gptfdisk
2013-01-10 + pacman -Suy nvidia-304xx
2013-01-10 + pacman -Syu nvidia-304xx-utils
2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
2013-01-10 + pacman -S mesa
2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
2013-01-10 + pacman -S ttf-dejavu
2013-01-10 + pacman -Suy lxdm
2013-01-10 + systemctl enable lxdm.service
2013-01-10 + pacman -S xorg-xdpyinfo
2013-01-10 + pacman -S pkgtools
2013-01-10 + pacman -S pkgfile
2013-01-10 + pacman -S bc
As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
Here are the xorg.conf and the Xorg.0.log of my last test configuration.
xorg.xonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 100 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
In the Section "ServerLayout" I modified the line
Screen 0 "Screen0" 100 0
by adding the 100 0 at the end.
Xorg.0.log
[ 12.997]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 12.997] X Protocol Version 11, Revision 0
[ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
[ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
[ 12.997] Build Date: 16 December 2012 04:45:14PM
[ 12.997]
[ 12.997] Current version of pixman: 0.28.2
[ 12.997] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
[ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.066] (==) ServerLayout "Layout0"
[ 13.066] (**) |-->Screen "Screen0" (0)
[ 13.066] (**) | |-->Monitor "Monitor0"
[ 13.066] (**) | |-->Device "Device0"
[ 13.066] (**) |-->Input Device "Keyboard0"
[ 13.066] (**) |-->Input Device "Mouse0"
[ 13.066] (==) Automatically adding devices
[ 13.066] (==) Automatically enabling devices
[ 13.066] (==) Automatically adding GPU devices
[ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.222] Entry deleted from font path.
[ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.223] Entry deleted from font path.
[ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.223] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.223] (WW) Disabling Keyboard0
[ 13.223] (WW) Disabling Mouse0
[ 13.223] (II) Loader magic: 0x7fcc40
[ 13.223] (II) Module ABI versions:
[ 13.223] X.Org ANSI C Emulation: 0.4
[ 13.223] X.Org Video Driver: 13.1
[ 13.223] X.Org XInput driver : 18.0
[ 13.223] X.Org Server Extension : 7.0
[ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.226] Initializing built-in extension Generic Event Extension
[ 13.226] Initializing built-in extension SHAPE
[ 13.226] Initializing built-in extension MIT-SHM
[ 13.226] Initializing built-in extension XInputExtension
[ 13.227] Initializing built-in extension XTEST
[ 13.227] Initializing built-in extension BIG-REQUESTS
[ 13.227] Initializing built-in extension SYNC
[ 13.227] Initializing built-in extension XKEYBOARD
[ 13.227] Initializing built-in extension XC-MISC
[ 13.227] Initializing built-in extension SECURITY
[ 13.227] Initializing built-in extension XINERAMA
[ 13.227] Initializing built-in extension XFIXES
[ 13.227] Initializing built-in extension RENDER
[ 13.227] Initializing built-in extension RANDR
[ 13.227] Initializing built-in extension COMPOSITE
[ 13.227] Initializing built-in extension DAMAGE
[ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.227] Initializing built-in extension DOUBLE-BUFFER
[ 13.227] Initializing built-in extension RECORD
[ 13.227] Initializing built-in extension DPMS
[ 13.227] Initializing built-in extension X-Resource
[ 13.227] Initializing built-in extension XVideo
[ 13.227] Initializing built-in extension XVideo-MotionCompensation
[ 13.227] Initializing built-in extension XFree86-VidModeExtension
[ 13.227] Initializing built-in extension XFree86-DGA
[ 13.227] Initializing built-in extension XFree86-DRI
[ 13.227] Initializing built-in extension DRI2
[ 13.227] (II) LoadModule: "glx"
[ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.559] compiled for 4.0.2, module version = 1.0.0
[ 15.559] Module class: X.Org Server Extension
[ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
[ 15.560] Loading extension GLX
[ 15.560] (II) LoadModule: "nvidia"
[ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.868] compiled for 4.0.2, module version = 1.0.0
[ 15.868] Module class: X.Org Video Driver
[ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
[ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.868] (++) using VT number 7
[ 15.875] (II) Loading sub module "fb"
[ 15.875] (II) LoadModule: "fb"
[ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.008] (II) Module fb: vendor="X.Org Foundation"
[ 16.008] compiled for 1.13.1, module version = 1.0.0
[ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.008] (II) Loading sub module "wfb"
[ 16.008] (II) LoadModule: "wfb"
[ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.025] (II) Module wfb: vendor="X.Org Foundation"
[ 16.025] compiled for 1.13.1, module version = 1.0.0
[ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.025] (II) Loading sub module "ramdac"
[ 16.025] (II) LoadModule: "ramdac"
[ 16.025] (II) Module "ramdac" already built-in
[ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.025] (==) NVIDIA(0): RGB weight 888
[ 16.025] (==) NVIDIA(0): Default visual is TrueColor
[ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
[ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
[ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
[ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
[ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
[ 19.584] (--) NVIDIA(0): TV-0
[ 19.584] (--) NVIDIA(0): DFP-0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV encoder: (null)
[ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
[ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.585] (==) NVIDIA(0):
[ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.585] (==) NVIDIA(0): will be used as the requested mode.
[ 19.585] (==) NVIDIA(0):
[ 19.585] (II) NVIDIA(0): Validated MetaModes:
[ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
[ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
[ 19.589] (--) NVIDIA(0): option
[ 19.589] (--) Depth 24 pixmap format is 32 bpp
[ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.599] (II) NVIDIA(0): Config Options in the README.
[ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 19.754] Loading extension NV-GLX
[ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.797] (==) NVIDIA(0): Backing store disabled
[ 19.797] (==) NVIDIA(0): Silken mouse enabled
[ 19.798] (**) NVIDIA(0): DPMS enabled
[ 19.798] Loading extension NV-CONTROL
[ 19.799] Loading extension XINERAMA
[ 19.799] (II) Loading sub module "dri2"
[ 19.799] (II) LoadModule: "dri2"
[ 19.799] (II) Module "dri2" already built-in
[ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.799] (--) RandR disabled
[ 19.817] (II) Initializing extension GLX
[ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
only removed the input detection stuff
Question
How can I shift the display to the right?
Many thanks for any hints.
rale
Last edited by rale (2013-01-19 11:46:14)Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
Thank You Mr.Elendig!
The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
Thanks
rale -
Group Folder not displaying on the desktop
Hi!
I have made a new and fresh installation of the OSX server 10.6 to a Mac Pro, due the extreme problems what our broken Raid Card caused us. I managed to install it okay, everything is working like before, except group folders.
I have proper AFP shares made for group folder and the mount shows fine. In the old stystem, I could go to group preferences on WGM, and on the Login / Items, select manage always just add the checkbox to "Add group share point", and the folder would display on the desktop for members of that group. Now it is not working. I actually booted from one backup of the last system and made sure that I have same settings than before.
What could be a problem here?A work around.
On a client work station:
In finder, manually mount the share you would like to have show up. You may need to authenticate. This is fine. Do so with any users name on your system that has access to said share.
Open WGM. (still on the client work station) You'll likely need to install Server Tools temporarily.
Select the group or user you would like the MCX to apply to.
Click Preferences.
Click the items tab.
Click Always.
Click the plus button on the right side.
Select the mounted share.
Click Okay
Select the newly added line item. It'll probably look like this: afp://server.example.com_. With a kind: URL
Put a check box in the "Authenticate selected share point with Users login name and password."
Click save!
That should do it. -
hi i know im only 15 but iam in an entertainment technology program studying Video production. I just bought Final Cut Studio with Final Cut Pro 7. I need some help, everything is blurry. Even when it says video not rendered in the canvas window it is extremely blurry. ONe thing dont understand is that if i change the zoom level in the canvas to about 50% where its so tiny i cant see it it looks very clear and not pixelated. Please help me...thanks
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
Shane -
My external drive is no longer displaying on my desktop
My external drive is no longer displaying on my desktop - Any suggestions on how to solve?
Thanks ;-)Finder -> Preferences -> General -> Show these items on desktop -> External disks
-
When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!
Tools > Options > Tabs - is the last preference there check-marked??
-
I bought a new computer, and downloaded iTunes, therefore the new itunes doesn't have my music or anything on there. I want to get everything on my iPhone to my new computer/itunes. But no matter what I do, it won't let me. My desktop has everything that my phone has on it, I just want it all moved to my laptop. Does that make sense? I could really use some help. I don't live with this desktop anymore so I need to be able to use my laptops itunes. Please help me. Thanks in advance!
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
How do I get an App to display on all desktops in Mission Control?
How do I get an App to display on all desktops in Mission Control?
I tried:
Right-Click on the icon in the Dock
Options -> All Desktops
This doesn't work.
The App was created using REALStudio. Does this have any bearing on the issue?
SyBHi, if the App is in the Dock, right click, choose Options>Open at login.
Or System Preferences>Accounts>Login Items window, drag the App there or click on the tiny plus icon to add it. -
How do I change the size of display on my desktop?
How do I change the size of display on my desktop?
Where the apple sign and than safsir file view history bookmards window help etc to make smaller
-
Multiple Rotate3d filters makes everything looks blurry
Hi I have a Flex 4 project that uses two rotate filters.
Once it to rotate the main container and the other to rotate an internal element.
The issue is that when applied simultaneously text, and everything looks blurry.
If I add a delay time to one of the effects so they are not applied simultaneously then the blurry effect seems to be fixed.
The thing is that I would like not to be aware if there is a rotation effect in a parent container or something like that, just want to apply the effect and that it work as intended.
Any suggestion or good practice to slove this?
Thanks in advanced
This is the "bug" demo file (remove the ".zip" part)
http://www.yourfilelink.com/get.php?fid=795616
Code sample (remove the " startDelay='5000' " of the filter to see the blurry effect):
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="rotationEffect1.play();rotationEffect0.play()">
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/mx";
@font-face {
src: url("../static/OpenSans-Regular.ttf");
fontFamily: "FONT_BASE";
embed-as-cff: true;
advancedAntiAliasing: true;
.baseText{
fontSize:18pt;
fontFamily: FONT_BASE;
contentBackgroundAlpha:0;
borderVisible:false;
color:#FF0000;
</fx:Style>
<fx:Declarations>
<s:Rotate3D id="rotationEffect1"
angleYFrom="60"
angleYTo="0"
duration="1000"
disableLayout="true"
autoCenterProjection="true"
autoCenterTransform="true"
target="{mainContainer}"
/>
<s:Rotate3D id="rotationEffect0"
angleYFrom="0"
angleYTo="60"
duration="2000"
disableLayout="true"
autoCenterProjection="true"
autoCenterTransform="true"
startDelay="5000"
target="{theimage}"
/>
</fx:Declarations>
<fx:Script>
<![CDATA[
[Bindable]
[Embed(source="../static/image.png")]
private var photoImage:Class;
]]>
</fx:Script>
<s:Group id="mainContainer" x="0" y="0" clipAndEnableScrolling="false" width="600" height="600">
<s:Label text="Hellooooo people" x="200" y="200" styleName="baseText"/>
<s:TextArea text="Hi There!\r\n watch this!fkosa okfdsofak kpfaksdpfk\n\r ffdsafasfd" x="200" y="300" styleName="baseText" editable="false" selectable="false"/>
<s:Image id="theimage" x="200" y="400" source="{photoImage}" width="200" height="200"/>
</s:Group>
</s:Application>Well, here is a post telling the same issue:
http://www.bit-101.com/blog/?p=2391
No solution thou, except of precatching matrixes. -
Qosmio X305 screen not displaying like my desktops LCD screen
My screen seems to be displaying dull images.
I'm kinda concerened, because it's an LCD screen, and its not displaying like my desktops LCD screen.
I put the brightness up, and that helped to see the images better, but they still are not of the quality they should be.
Is there a way to fix this? Or is that just how it is?Many Desktop LCD Monitors can get very bright, much brighter than most notebooks. So it may just be how it is. Perhaps you could go to the shops and compare it to other X300's on display.
Try resetting or modifying the Contrast/Colour/Brightness settings in the nVidia control panel. -
iMac running 10.8.6 doesn't display entire desktop? Reset display to various options and it doesn't display the entire desktop. (asking for a friend, not my iMac)
I think you wanted to say 10.6.8. 10.8.6 does not exist.
The first thing I think is that zoom may be enabled. On Mac OS X 10.6.8, a way to disable it is to hold the Control key and scroll down with the mouse or trackpad until you can see the whole display. Another way would be to disable zoom in System Preferences > Universal Access -
Display Object list Button(Shift+F11) in Transaction code SE09
I am Facing problem Due to version upgradation .
Problem is
I can See Display Object list Button(Shift+F11) in Transaction code SE09 of SAP4.6c.
But i cant found it in Transaction code SE09 of ECC6.0.
Could any buddy ans me where can i find that Button to display object list .
Thank you in advance
Deepak.Hi Deepak -
By chance did you post this message to the wrong discussion forum? This forum is for Financial Performance Management related products, most of which are not yet even based on SAP NetWeaver technology where transaction SE09 would be relevant.
Your question seems more suitable to me in the SAP Software Logistics forum.
<a class="jive_macro jive_macro_community" href="" __jive_macro_name="community" modifiedtitle="true" __default_attr="2149"></a>
Please try to post there in hope of receiving a satisfactory answer.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group -
Desktop files disappeared from displaying on the Desktop
My existing Desktop files disappeared from displaying on the Desktop--the files still exist, and newly added files appear on the Desktop; I did not enter any "hide my files" command. How do I have them display? Running OS X Yosemite 10.10.2
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist. Move the .plists to your desktop.
Re-launch Finder by restarting the computer and test. If it works okay, delete the plists from the desktop.
If the same, return the .plists to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.
Maybe you are looking for
-
How do I find out what kind of computer I have?
I am looking at the stickers on the bottom of my laptop and all I see is 8922 as the model number. When searching the website I could not find anything with 8922 in it. I need help please. I deleted my sound driver and I need a new one, but I can't
-
ITouch Get Stuck and after restore problem with hard disk
some days before the stuck my iTouch begin to give me an error when i connect it to iTunes: the sync starting and when was time of backup it said that isn't possible to backup my iPod because it was disconnected (what?!?! it's plugged in and he see i
-
Recently created items not shown in finder.
In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to sho
-
How to create a 16x9 slideshow
I'm looking for the best method to create a slideshow that ends up in 16x9, without stretching the images, for viewing on a large LCD HD TV. Something tells me that I might need to begin by cropping the original images in pre-processing, but I'd sure
-
The little arrow which says "Play Next, Add to Up Next, Go to artist" etc. only appears at the top of the screen on the now playing part. On 11.2 on my laptop before it got refurbished, this arrow appeared when you hover the curser over the name of a