Display Additional errors in Participation Monitor (HRBEN0003)

Hi,
How can i display additional error in Participation monitor.
I want to display error when there is a child who is a student exists and if the age of the child exceeds 18, he can no longer exist as a student.
So if the age exceeds that limit i want to display error in Participation Monitor.
let me know if there is any BADI or User Exit available?

solved on my own

Similar Messages

No display of error message log in dialog box

Dear MM Experts,
During enter incoming invoice (MIRO), when we click simulate after entering all necessary data, all error & warning messages are displayed in a dialog box if there is red traffic light. In our case despite red traffic light error messages are not displayed as shown in below screen shot. Only warning messages are displayed & document canu2019t be posted. Please let me know if anyone has encountered such behavior & knows the solution. We just want to see the error messages in dialog boxes so that necessary data can be entered and document can be posted.
Additional information: 1. No GR needs to be done, 2. GR based IV is unchecked in PO, 3. No validation is active for the company code,
Thanks & regards,
Avinash

Hi,
Thanks for your response.
Our problem is not to post a particular invoice doument, the main problem is that error log is not displayed in MIRO. For example if balance is not zero then this error should be displayed in error log dialog box, which is not happening due to which we are not able to post any invoice document as error is not known to the user. Please let me know if any suggestions.
Additional information: We have deactivated all validations & BADis. We also tried to compare with other systems where error log is displayed properly however our ABAP consultant could not find any difference. Any Input on how to compare is also welcome.
Thanks & best regards,
Avinash

Huey Pro calibrator- error message display measurement Error

i am using this huey pro calibration.. it had been a year without problem... but now i am trying to calibrate my apple cinema display LCD 30 inch it keep saying error message- display measurement error.. and huey support never answer my e-mail. any idea? how can i fix it.. i did re install software many times but same thing happen.. so right now i can;t calibrate my monitor.. any help please

>a nice NVidia card... Please help Adobe!
1a - what is the model nVidia card, and what is your driver version?
1b - for instance, I have a GTX 285 and driver 296.10
2a - aside from the occassional Adobe employee, this is a user to user forum, not Adobe suport
2b - how to contact Adobe...
Adobe contact information
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Photoshop window does not display unless connected to external monitor

I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
Is this a known issue?
Any workarounds?
Any ideas?
There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

HTTPS: Error RWB components monitoring

Hi
After implementing HTTPS, when trying display component monitoring in RWB, the follwoing error displayed.
Error during communication with System Landscape Directory: Unable to open SSL connection to host "myhost.mydomain.com:50101". Server certificate rejected by ChainVerifier.
What shall I do? RWB was perfectly ok with HTTP.
Any help is very much appreciated.
Thank you
//Jack

Hi,
There is a thread which had similar discussion-
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
http://help.sap.com/saphelp_nw2004s/helpdata/en/d7/3344d3360ab24ab70d7155e356c988/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/90220b1c034eb6af10e123ca419f58/content.htm
Hope this helps,
Regards,
Moorthy

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad. It's more common than you'd think.
To avert the error:
Open the Color Management panel of your Windows operating system. In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
After doing the above, log out of Windows and back in again, just to ensure everything's updated.
Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1). For many monitors this isn't a terribly wrong assumption.
If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor. You'll want to take some time to get your mind around how color-management works, and that is not a trivial task. It's certainly well beyond what can be taught in a forum post by post.
Good luck.
-Noel

Error in Application Monitor

Hello,
I am facing a weird problem.
I see an error in application monitor with no description. It only has the date and time.
When I try deleting this error, I get a message "Error deleting alert"
Now in RZ20, I see that there is an error under Purchase Order.
"Backend application errors PurchOrder 4100001842: Transfer failed"
When I try to open this and try to complete it, I do not see any item under the screen "Alert Display". So I am unable to complete this from RZ20.
We are aware of the fact that we did have an error witht his PO. There was some config error which was rectified and moved to production after which the PO made it successfully to ECC.
But the error remained in the application monitor and is now haunting the monitoring team who are forced to check every time to see if this is the old or a new one.
Any idea on how I can get this off the app monitor?
Thank you.
Manish

Hello Muthu,
I have checked this already. We do not have any error in BBP_PD for this PO. This has got replicated to ECC with no errors.
Not sure why this is still seen in app monitor.
Any FM/Table from where I could delete this log entry. Just kidding..
Pls advise.
Thank you.
Manish

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Display Custom Error Message in OIM 11g

Hi,
I'm trying to display an error message from a validation event handler but seems that am missing something. When the "oracle.iam.platform.kernel.ValidationFailedException" is thrown from a validation handler an error message is displayed: "An error occurred". If an error code is provided (see code below) then the message looks like: "An error occurred. The corresponding error code is ERR-0001". I guess that some resource bungle with corresponding messages should be provided.
the code used:
package test;
public class UserGeneralValidationHandler implements oracle.iam.platform.kernel.spi.ValidationHandler
@Override
public void validate(long processId, long eventId, Orchestration orchestration)
throws ValidationException
String errorCode = "ERR-0001";
String message = "Simple validation message.";
ValidationFailedException ex = new ValidationFailedException(message);
ex.setProcessID(processId);
ex.setErrorCode(errorCode);
throw ex;
Q:
1.What is missing for complete solution?
2.What is the algorithm that used by OIM to find default or non default resource bundle?
3.How to change out-of-box validation messages? For a sample "The organization ABC does not exist." message is shown if non existing organization is provided during user creation and I'd like to have a different one.
Regards
Serge

rename OIMUI.jar to OIMUI.zip
find logging_en and loggin.properties.
Modify the "IAM-2050512" error message with your custom message
Find Agent and agent_en.properties.
Find Note[ERROR_SUBMITTING_REQUEST].text. Modify the message. Make sure the message must be the same with in logging.properties("IAM_2050512")
Deploy
change the OIMUI.zip to jar
replace the existing OIMUI.jar
login to weblogic and redeploy OIM (oim.ear)
no need to restart OIM server.
Test:
create a request in web console again, you must see the custom message when you hit the submit button
hope this helps.
-rad

Displaying Custom Error Message in ALV

Hello Experts,
Usually, when an error occurs in editable ALV, the standard WD ALV functionality marks the particular error cell in red and displays the error message.
I want the same functionality for custom error messages in event ON_DATA_CHECK. I'm able to display the message, but looking for a way to mark cells as well.
Please help....

Hello friend,
I think this link will help you much more clear on the coloring of the ALV concepts.
http://help.sap.com/saphelp_smehp1/helpdata/en/5f/ec57c72a1349c8bfdda56d976e9399/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393?QuickLink=index&overridelayout=true
Thanks,
Sri Hari

Display custom error message in enhancement spots

Hi all,
Is there someone here who've encountered having the need to display custom error message in an enhancement spot? Could you help me please.. I can't find any reference from the net.
Thanks in advance
Regards,
Aris

Hi,
The error message can be only displayed in enhancement spots based on thr program flow.
You have to determine where its getting called for ex: in PBO or PAI etc.....
You have to find the right place to display the error messages . for ex: using a memory id ......

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

My server is displaying an error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? This happened suddenly, and I did not even change anything about my webpage.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in [filename].html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1374430&tstart=0

I am stumped I do not understand why my roommates macbook pro when duel screened will display perfectly on my monitor while mine refuses to, but mine will display perfectly when using another monitor that is not mine. Please help me out.

One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Display Additional errors in Participation Monitor (HRBEN0003)

Similar Messages

Maybe you are looking for