Display administrative user sessions in dashboard?
Is it possible to modify the default setting in Multipoint 2012 to permit display/control of sessions for users who are members of the local Administrators group? We have a workaround/bug in an application we are running in MPS which requires
this elevated privilege, but obviously can't see/control the sessions of these users with the Dashboard, unless I'm missing something.
Thanks in advance!
Do you already set the DISPLAYNAME variabele in the authorisation block?
regards
John
http://obiee101.blogspot.com/
Similar Messages
-
Limiting rows displayed from user-selection on dashboard prompt
Hi,
I'm looking for a way to limit the number of rows displayed after a user has made a selection using a dashboard prompt. Here is my scenario:
User selects 24 periods of data using an 'In Between' dashboard prompt (i.e. Jan05-Dec06). 24 rows are returned by the query but I only want to show the last 12 rows (Jan06-Dec06).
Motivation is that I'm using the MSUM function to display a 12-month moving sum total and I don't want to display the first 12 rows as they do not contain a complete moving sum total.
I've looked at using a variable to store the user selection at the dashboard prompt, but the 'In Between' dashboard prompt does not allow one to store a result in a variable.
Any suggestions are welcome!
Thanks!Hi Som,
Thanks again for your feedback. I've thought about using dynamic repository variables, but found them not to be the answer. Although the moving sum would always be a 12 month total, the user needs to be able to vary the range of periods using the dashboard prompt. Today he might only want to look back 12 months, tomorrow he may need a 5 year overview. Using dynamic repository variables would mean I'd have to create variables for the entire history i.e. CM until CM - 240 (20 years * 12 months). If a user then would like to report on a specific period, he would need to pick the correct dynamic variables, which would not be user friendly/acceptable.
I think I may need to resolve this problem in my datamart by calculating & storing a 12 month total (the only 'fixed' requirement of the report) in my fact table. This would also remove the need for the user to select 12 months more that he would see in his report (a drawback of my original scenario above).
Thanks again for your input!
Regards,
Dutch -
How to retrieve User Session in Xcelsius 2008
Hi
I am currently building dashboards with some securities on display. The dashboards have to show different views (e.g. Manager view with full access of data and Employee view with partial access of data) for different users, and I expect to get the user information (particularly user name) from the BO user session for making the security decision.
I can successfully retrieve the user session from Dashboard [url button] to JSP using openDocument (by looking at the cookies), but it seems that I have no way to import the data back to the Dashboard. When I am using Data Manager > XML Data (With XML datasource is a JSP file), it seems the user session cannot be retrieved.
So, my question is, how to retrieve the user Name in Xcelsius 2008 ?
Any help is greatly appreciated.Hi,
we did also some research activities about Xcelsius. We are passing the user name to the Xcelsius via Webservice. Based on the portal integration, you do not have to care about the authentication to the Webservice. This does the Enterprise Portal for you. For the integration, we are currently using a BSP solution. In this way, you can get the user name very simple:
sy-uname
You can put into the Webservice or provide it as Flash Variable to the Xcelsius in the <OBJECT> tag.
Take care,
Thomas -
No User Sessions shown in Enterprise Manager Console !
Hello all,
We have Forms 11gr2 with Weblogic 10.3.6.
When I opened console of Enterprise Manager Fusion Middleware Control, and clicks on "Forms" to check user sessions, it doesn't display
any user sessions, although many users are connected to Forms applictaion at the time.
Please guide how can I check the users connected to application ?
Thanks.
Shanky Ben.There is a bug in opmn.
This is what i got from Oracle support for 11gR 11.1.2.0 version (on linux x64):
Please do the following to apply the patches:
1) Download and apply the patch 15948641, which upgrades FMW to 11.1.2.1.
2) Download and apply both the patches 13055259 and 13490778 on FMw 11.1.2.1. Otherwise. both patches will fail to apply.
If you are on 11.1.2.0 you must upgrade to 11.1.2.1 and apply patch
13055259 (patch 13490778 is already included in 15948641).
If you are on 11.1.2.1 try to apply patch 1305529.
Regards -
Unable to view BIPub report in the Dashboard by Non Administrator users
Hi All,
I have created a BI Publisher report and added the same to the Dashboard, I can view it as the Administrator user but unable to view it as any other Users.
I updated the privileges in the BI Presentation services and gave permission to Everyone for BI Publisher:
Oracle BI Publisher Enterprise
Add BI Publisher Reports to Dashboard - Everyone
View BI Publisher Reports - Everyone
Schedule BI Publisher Reports - Everyone
Send BI Publisher Reports - Everyone
Build BI Publisher Reports - Everyone
Analyze BI Publisher Reports - Everyone
but users still get the below error:
The error message is :
"Unauthorized Access: Please contact Administrator"
Any help is greatly appreciated.
RegardsHi Saichand,
Thanks for the reply, I did add and it worked successfully; but the issue now is that I had assigned the XMLP_ADMIN, XMLP_DEVELOPER roles to this user and he now has XMLP Administration rights. Which is not very good.
Is there any workaround to restrict XMLP Administration to this user and allow him just to view the BI Pub Report?
Your comments are greatly appreciated.
Best Regards
B -
Administrative user only for install software but prevent intercative session
Hello,
as an university, we are not allowing domain users di write anything on the C:\ drive on our Win7/64 PCs; therefore users are unable to install any software and that is what we - usually - want.
But there are some users (researchers, Teachers or labs) who sometimes need to install software in order to test it. So we created on their PCs a local user "install" as member of the local administrator Group. They should use it when
UAC prompts them to give administrative rights to install software or with the "Run as administrator" right click. This works fine but unfortunately we noticed that many users are using the "install" account to do their daily work, so they
are working the whole day long with the highest privileges and we do not want this for obvious security reasons.
We want to leave the administrative user "install" for the software installation purpose but we want prevent users using it interactively; we couldn't find a way to do this. Is it possible ?
In order to discourage users, we also made some tests giving the "install" local user, deny permission on the start menu, desktop and some other folders, so that they couldn't find programs and be very limited in using the installa account
interactively, but this does not give the expected results (for example the user is able to create a folder on the desktop after a couple of popus warnings, or the start menu is not completely empty).
Any ideas ?
Thank you in advance.
Best regards,
EricHi,
In my opinion, you can try to use AppLocker to accomplish this task. You can create a new pricple the allow specific user or group install application. Also the type of about to be installed app could be customized.
You can allocate User group app install permission to make sure they could install APP unrestricted but doesn't have administrator rights.
Please refer to the link below for more details about APP Locker:
http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx
Roger Lu
TechNet Community Support -
How to check if a user session is active in Java application server
Hi Experts,
We have a online scenario with a third party system by which a portal user will launch the third party application in a new window from portal. The SSO will work at the third party web application with the dynamic key that is generated by calling a webservice for that user. Now, as the user works on the launched screen, they will have to check whether the user (logged in portal) session is still active. ie., they will be periodically calling a service hosted by SAP java application server to find out whether the corresponding user who launched the session is still logged in or logged out.
So, my question is, how can i find out programatically whether a user/user's session is still logged in/active in SAP Netweaver Java AS? We are in version 7.3.
Kindly help me in this regard.
Regards
Vijay.KHi Vijay,
Could you check below links
Tracing Single User Sessions - Administration - SAP Library
Display and Manage User Sessions (SAP Library - Tools for Monitoring the System)
Hope this helps.
Regards,
Deepak Kori -
Displaying ETL Times On BI Dashboards
Hi everyone,
As the title suggests, our users have requested that we display how actual the data is on their reports or when it was last updated, i.e. latest ETL completion time. NOT when the report was last run.
Does anyone have any ideas on how this can be achieved? My colleague has suggested that whenever ETL is completed, we write the time and date in a table using SQL, then have it displayed on the report.
Thanks in advance,
CihanHi,
We can do two ways.
Just create one report with etl end date column and apply max function then add narrative view and apply like @1 then drag this repot to in your dashboard page above. This will display etl date in your dashboard
2. Create one variable using sql query then open your report add title view and here you can apply variable here.
Use the repository/session var in fx ,hide those columns just use the refer of columns @1 or @2 in narrative section
Reference : http://obiee101.blogspot.com/2008/02/obiee-adding-session-variables-to.html
http://download.oracle.com/docs/cd/E12096_01/books/AnyUser/NarrativeView.html
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on Oct 9, 2012 2:28 PM -
How to check whether a user session is null or not
Hi
I am using Jdeveloper 11.1.2.2
I have a use case of running some Junit test case, this is the problem I have :
There are some Junit tests which are written for some VO's. While testing insert and update operation in Junit there is two mandatory columns Created by and Updated by to be entered for committing into the database.
These values are taken from the UserName of the current UserSession .
So for getting the these values for each user I thought of displaying a JPanel before the test is run, where the user enters the Username and password which is validated and the user is verified.
First, I need to check whether there is a session present or not. For checking this, I wrote a createUserSession() and did like this inside it :
if(fixture.getApplicationModule().getSession().getUserData().isEmpty())If so to show the Jpanel and get the user details and verify the user.
But while running the test itself I found that the session is already present, now I just have to input the values based on who is the user.
But Junit doesn't run the tests in the order in which the test are written. So I have to call this in all the test cases.
The Question is :
How can I check whether the session is already present or not, so that I don't have to ask the user every time while every test is running to enter the Username and Password ?
Thanks,
Nigel.
Edited by: Nigel Thomas on Jul 30, 2012 10:26 AMHi,
wondering why don't you create test users and then automatically log them in as Jan Vervecken did on the threads I pointed you to. This way your test cases run without user interaction. To test if a session exists for a user, I would put a custom property into user data. If this property exists, the user session is an existing one. However, make sure the information you save into the user data survives passivation as otherwise the information you get out of this is not accurate. See: http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/
Frank -
Default User setting at Dashboard level
Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
RavindraIn the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias -
Hi,
Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
++++++++++++++++++++++++++++
Source: Desktop Window Manager
Event ID: 9003
Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: mmc.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: javaw.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: Explorer.exe.
++++++++++++++++++++++++++++
Source:Desktop Window Manager
Event ID:9009
Detail:The Desktop Window Manager has exited with code (0x40010004)
++++++++++++++++++++++++++++
Source:Microsoft-Windows-Winlogon
Event ID:6005
Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
++++++++++++++++++++++++++++
In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
by we do not reboot the server?Hi,
The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
If the issue can always be re-produced, then I would suggest you fully patch the system.
More information for you:
The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Setting default value read from user session, for an LOV in Query component
I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
Can any one let me know how to go about with this?I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
SQL> var run_type varchar2(1)
SQL> exec :run_type := 'A'
PL/SQL procedure successfully completed.
SQL> create table my_cycles as select level cycle_id
2 , level cycle_status
3 from dual connect by level <= 5;
Table created.
SQL> select cycle_id
2 from my_cycles
3 where case
4 when :run_type = 'D' and cycle_status = 1 then 1
5 when :run_type != 'D' and cycle_status in ( 2, 3 ) then 1
6 end = 1;
CYCLE_ID
2
3
2 rows selected.
SQL> exec :run_type := 'D';
PL/SQL procedure successfully completed.
SQL> /
CYCLE_ID
1
1 row selected.
SQL> -
[SOLVED] Question about systemd-user-session
Hi!
I'm trying to setup a systemd --user session (using user-session-units and xorg-launch-helper from aur).
I have a couple of questions; this is my .xinitrc now:
#!/bin/bash
export BROWSER=chromium
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
spacefm --desktop &
compton -cGCf -m 0.9 -i 0.8 -D 5 --shadow-exclude 'g:e:Conky' &
volumeicon &
/home/federico/Script/touchpadoff_onboot.sh &
#connman-ui-gtk &
/home/federico/Script/calised-script &
dimdaemon &
tint2 -c .config/tint2/dragonauta.tint2rc &
conky -p 5 -c Script/conky.conf &
exec openbox
1) is "if" statement required when using systemd-user-session? And if yes, how can I reproduce it?
2) "conky -p 5 " will wait 5 seconds doing nothing. Will this mean that other .service will wait for it to finish? (i guess no, since they're executed in parallel).
3) how can I export "chromium" as my default browser?
Thank you very much!
Last edited by nierro (2013-04-06 17:56:17)I followed everything in that wiki, and in KaiSforza and sofar github page.
I finally managed to get my old method (autologin to vt and autostart x) to work together with systemd --user: i put in .xinitrc "systemd --user" and deleted everything else.
So, my .config/systemd/user/ works. The problem is in the [email protected], i guess. I configured it like wiki says, mind to post here your /etc/systemd/system/[email protected]?
Thanks.
EDIT: here it is my [email protected]:
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
[Unit]
Description=User Manager for %I
After=systemd-user-sessions.service
# This is needed for folks running Xorg on vt/1
Conflicts=[email protected]
[Service]
User=%I
PAMName=login
# Note memory:/ required kernel memory CGroups support
ControlGroup=%R/user/%I/shared cpu:/ memory:/
ControlGroupModify=yes
Type=notify
TTYPath=/dev/tty1
ExecStart=-/usr/lib/systemd/systemd --user
Environment=DISPLAY=:0
Environment=XDG_RUNTIME_DIR=/run/user/%U
Environment=DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/%U/dbus/user_bus_socket
[Install]
WantedBy=getty.target
and loginctl says my user has "1000" as UID.
Last edited by nierro (2013-04-05 16:13:14) -
Multiple user sessions for ADF application
Hi All,
We have a ADF application with 3-4 pages starting with a login screen.
Assume we have two users, user1 and user2. In same system but different browser windows, when both users are logging in, only user2 's session is active. Though user1 logged in first and is able to perform transactions, the moment user2 logs in, user1's session is being over-written by user2 (user1's window now displays user2's information). I have observed the URL of user1 window which now changes to user2's URL (_adf.ctrl-state parameter of user2 is displayed in user1 browser)
How do we overcome this?? We have a requirement to be able to open multiple user sessions.
We are using JDeveloper 11.1.2.3.0 and browsers being used are IE 8, IE9 and chrome.
Thanks,
DeeptiHi,
Continuation to my above question
I am using these two statements in my code..
ExternalContext ectx = FacesContext.getCurrentInstance().getExternalContext();
HttpSession httpSession = (HttpSession)ectx.getSession(true);
On any event in Window1, I gues it is getting the context and session of window2(this being the latest)..
Shouldnt it return the context and session of the current window instead of the latest window???
This problem is well explained here
internet explorer 8 - How to avoid session sharing provided by IE8 programmatically in Java EE application? - Stack Over…
I want to know.. what is the best way to handle this in ADF... We are using managed beans with request scope and using HttpSession to store few values like user Id. -
"Manage Users" IR report displaying incorrect user types
Home>Administration>Users
APEX 4.0.2.00.07
DB 11.2.0.2
Found a couple of question-raising things:
1) User type is showing "Workspace Administrator" for almost all users (many are only users) with a couple identified as "Developer" (who really do only have developer privs turned on). If I knew the sql for the IR report I might find the problem - checked wwv_flow_fnd_user and wwv_flow_developers and they both look OK (no recs in wwv_flow_developers for the end users and those with given admin privs are marked as admin, etc.). Did find one dup group name but removing it didn't seem to have an effect.
2) Trying to find out what is going on I found the second: It appears that if you have assigned more than one group to a user (apex group to apex user), then add the group_name column to the Manage Users IR, you get the "single row subquery returns more than one row".
Haven't found any other posts here on this. Any ideas?
Thanks,
SteveThanks Richard - forgot about the builder import.
After taking the IR sql and working it I found the following:
In this apex installation...
There seems to be a problem with the outer join between wwv_flow_developers and wwv_flow_fnd_user which brings non-null values for d.is_admin and d.is_developer (and for us these are 'Y' if there are no matching records in wwv_flow_developers.
Changing the decode for DEV_TYPE to use a nvl for d.userid to set all users to end user if they are not in the wwv_flow_developers table fixes the display of user type.
Now I am guessing this is a data anomaly rather than a bug. Anyone have any ideas on why the outer join to wwv_flow_developers shows a not-null value for is_admin and is_developer?
Steve
Here is a mostly-intact version of the region source (I shortened it considerably from the code below to focus on the incorrect USER TYPE display issue):
select /* APEX4350P55a */
USER_ID,
u.user_name "USER",
u.email_address "eMail",
u.first_name,
u.last_name,
replace(u.default_schema,'%'||'null%',null) df,
decode(nvl(d.is_developer,'N'),'Y', (select case
when (wwv_flow_fnd_user_api.workspace_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration from dual),
m.no_developer_priv) developer,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login2,
decode (nvl(d.is_developer,'N'),'Y',
nvl(builder_login_count,0),null) builder_login_count,
decode(nvl(u.account_locked,'N'),'Y',m.yes,m.n)ul,
case
when (wwv_flow_fnd_user_api.end_user_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration,
u.DESCRIPTION,
u.PASSWORD_LIFESPAN_DAYS,
u.PASSWORD_LIFESPAN_ACCESSES,
u.PASSWORD_ACCESSES_LEFT,
u.LAST_AGENT,
u.LAST_IP,
u.ACCOUNT_EXPIRY,
u.FAILED_ACCESS_ATTEMPTS,
u.CHANGE_PASSWORD_ON_FIRST_USE,
u.FIRST_PASSWORD_USE_OCCURRED,
decode(nvl(d.is_admin,'N'),'Y',
m.admin,decode(nvl(d.is_developer,'N'),
'Y',m.dev,m.end_user)) dev_type,
(select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id) group_id,
(select GROUP_NAME from WWV_FLOW_FND_USER_GROUPS where id = (select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id)) group_name,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
nvl(d.developer_type,'END_USER') developer_type,
decode(nvl(ALLOW_APP_BUILDING_YN,'Y'),'Y',m.yes,m.n) ALLOW_APP_BUILDING,
decode(nvl(ALLOW_SQL_WORKSHOP_YN,'Y'),'Y',m.yes,m.n) ALLOW_SQL_WORKSHOP,
decode(nvl(ALLOW_WEBSHEET_DEV_YN,'Y'),'Y',m.yes,m.n) ALLOW_WEBSHEET_DEV,
decode(nvl(ALLOW_TEAM_DEVELOPMENT_YN,'Y'),'Y',m.yes,m.n) ALLOW_TEAM_DEVOPMENT
from WWV_FLOW_FND_USER u,
(select USERID,
decode(instr(DEVELOPER_ROLE,'ADMIN'),0,'N','Y') is_admin,
'Y' is_developer,
case
when instr(DEVELOPER_ROLE,'BASIC_DEV') > 0 then
'BASIC_DEV'
when instr(DEVELOPER_ROLE,'ADMIN') > 0 then
'ADMIN'
when instr(DEVELOPER_ROLE,'CREATE') > 0 then
'DEVELOPER'
else
'UNKNOWN'
end developer_type
from WWV_FLOW_DEVELOPERS
where security_group_id = :flow_security_group_id) d,
(select wwv_flow_lang.system_message('F4000.NO') n,
wwv_flow_lang.system_message('F4000.YES') yes,
wwv_flow_lang.system_message('PASSWORD_VALID') password_valid,
wwv_flow_lang.system_message('PASSWORD_EXPIRED') password_expired,
wwv_flow_lang.system_message('NO_DEVELOPER_PRIV') no_developer_priv,
wwv_flow_lang.system_message('DEVELOPER') dev,
wwv_flow_lang.system_message('ADMINISTATOR') admin,
wwv_flow_lang.system_message('END_USER') end_user,
wwv_flow_lang.system_message('BASIC_DEVELOPER') basic_developer
from dual) m
where
u.user_name = d.userid(+) and
u.security_group_id = :flow_security_group_id
Edited by: stevehoward on Jul 6, 2011 11:37 AM
Edited by: stevehoward on Jul 6, 2011 11:40 AM
Maybe you are looking for
-
How do I create a folder so that my virtual machine can see it
I have windows 7 and I also have Windows Virtual PC with a Windows XP virtual machine installed on my system. I would like to setup a folder on my windows 7 operating system and have my XP virtual machine see that folder. How can I do this?
-
I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item
-
How to send an group email with text and photo with out having google trash it
how to send a group email with imac 21.5 8.1 Yosemite gmail without having it trashed automatically
-
Firefox updated automatically from 17 to 18. But now my Kapersky Password Manager does not work. l have been waiting for Kapersky to fix this problem for three weeks but they have not. So I would like to reinstall FF 17 until Kapersky updates. Howeve
-
Problem when updating the notes through synchroniz...
I use to update my outlook 2003 notes regularly now it won't updating. I re-install the pc suite once, as soon as I re-installed it worked but only one time. My PC Suite version is 7.0.8.2 Mobile Phone N70 Music Edition.