Display all objects used in a program

Hi guys,
i want to create a Zprogram to Display all objects used in a program.
is there any class that can help me plzzz.
CL_WB_PGEDITOR
CL_WB_TBEDITOR.
CL_WB_EDITOR.....
thks

Hi Oubaha,
You can use SE80 to display objects used by a program.
Regards,
Chester

Similar Messages

Report to check authorization object used in customized programs

Hi Guys,
An auditor came and he raised a question to us, he asked whether all of our customized transactions and programs are maintained with authorization checks? The question is how can we check what authorization objects are used for our customized programs and transaction codes? The developer did not maintain the objects used for that program in SU24 table. Is there a program or a report to show us all the authorization object used for a customised program or transaction? Example : T-code MIGO we can check in SU24 table for all the authorization object used. How do we check for customized tcodes? Please advise. Thanks!
Edited by: Jarod Tan on Nov 25, 2010 9:42 AM

Note that some programs are built in such a way that no (visible) auth check is necessary, or even desired at all.
To determine the necessity of an auth check, you should check that starting it has an entry point (tcode, rfc, service) which is appropriately restricted. The rest (whether and where and how a further check is evaluated) is entirely dependent to what the program actually does.
Well designed applications generally have centralized functions and methods, and the checks are in there or a "base check" they use.
Others again use the same in UI programming to determine the visibility of functions, to make the application more intuitive for the user. This on it's own is however not a sufficient auth check to rely on.
Code review is an art form!
Cheers,
Julius

Find dictionary object used in ABAP program

Dear All,
Pl help me find out all the dictionary objects used in report program and dialog program.
Input will be program name(report or module pool). output will give name of the database tables used in that program.
thanks.

Hi,
Use the FM RS_PROGRAM_TABLES
pass the object type as PROG for report and the program name for object name
Vikranth

Is there any Table to display all Tcodes used in BW

Hi
Is there any Table available where all Tcode can be seen.
Thanks,
Jaswantha

hi,
these are the tcodes in bw..
RS00 Start menu
RS12 Overview of master data locks
RSA0 Content Settings Maintenance
RSA1 BW Administrator Workbench
RSA10 Realtime Test Interface Srce System
RSA11 Calling up AWB with the IC tree
RSA12 Calling up AWB with the IS tree
RSA13 Calling up AWB with the LG tree
RSA14 Calling up AWB with the IO tree
RSA15 Calling up AWB with the ODS tree
RSA1OLD BW Administrator Workbench (old)
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSADMIN RSADMIN maintenance
RSADRTC70TOADR11 Conversion of table TC70 in ADR11
RSANWB Model the Analysis Process
RSANWB_CRM_ATTR Fill CRM Attributes
RSANWB_EXEC Execute Analysis Process
RSANWB_IMP Calculation of Importance
RSANWB_START_ALL Model the Analysis Process
RSANWB_SURVEY Analysis Process: Create Target Grp
RSAN_CLTV CLTV Modeling
RSAN_CLTV1 CLTV
RSAN_RESP Response Prediction Models
RSAN_RFM RFM Modeling
RSAN_SALES_PL_CALL Execute Sales Planning
RSAN_SURV_SHOW BW Survey
RSAN_SURV_TG BW Survey: Target Group Management
RSAN_VERI Analysis Process: Test Monitor
RSAN_WB_TST IMC Wrapper Transaction for Testing
RSARCH_ADMIN BW Archive Administration
RSARFCEX Variant for RSARFCEX
RSASSIBTCH Schedule Assistant in Background
RSATTR Attribute/Hierarchy Realignment Run
RSAWB New AWB
RSAWBSETTINGSDEL Delete user settings of the AWB
RSB0 Maintain OLAP authorization object
RSB1 Display authorization object
RSB2 Data Marts Generation Center
RSBBS Maintaining BW Sender-Receiver
RSBBS_WEB Transaction for the RRI in the Web
RSBCTMA_AC xCBL Action Codes
RSBCTMA_DT Mapping of Ext./Int. Document Type
RSBEB Business Explorer Browser
RSBMO2 Open Hub Monitor
RSBO Open Hub Maintenance
RSBOH1 Open Hub Maintenance
RSBOH2 Open Hub Maintenance
RSBOH3 Open Hub Maintenance
RSBO_EXTRACT Auth Check Open Hub Extraction
RSBROWSER BW Browser
RSBWREMOTE Create Warehouse User
RSCATTAWB CATT Admin. Workbench
RSCDS Summarization routine
RSCONCHA Channel conversion
RSCONFAV Favorites Conversion
RSCRMDEBUG Set Debug Options
RSCRMISQ Regis. of Infosets for Target Groups
RSCRMMDX Edit MDX
RSCRMMON Monitor Query Extracts
RSCRMSCEN Regist. Closed-Loop Scenarios
RSCRM_BAPI Test Program for RSCRM Interface
RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
RSCRT BW Monitor (Near)-Real-Time Loading
RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
RSCR_MAINT_URL Maint. of URL Variables for CR/CE
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV1 BW Customizing - View 1
RSCUSTV10 BW Customizing - View 10
RSCUSTV11 BW Customizing - View 11
RSCUSTV12 Microsoft Analysis Services
RSCUSTV13 RRI Settings for Web Reporting
RSCUSTV14 OLAP: Cache Parameters
RSCUSTV15 BW Customizing - View 11
RSCUSTV16 BW Reporting
RSCUSTV17 Settings: Currency Translation
RSCUSTV18 DB Connect Settings
RSCUSTV19 InfoSet Settings
RSCUSTV2 BW Customizing - View 2
RSCUSTV3 BW Customizing - View 3
RSCUSTV4 BW Customizing - View 4
RSCUSTV5 BW Customizing - View 5
RSCUSTV6 BW Customizing - View 6
RSCUSTV7 BW Customizing - View 7
RSCUSTV8 BW Customizing - View 8
RSCUSTV9 BW Customizing - View 9
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSD5 Internal: Maint. of Techn. Chars
RSDBC DB connect
RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
RSDB_INIT Initial Download of D&B Data
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSDL DB Connect - Test Program
RSDMD Master Data Maintenance w.Prev. Sel.
RSDMD_TEST Master Data Test
RSDMPRO Initial Screen: MultiProvider Proc.
RSDMPROD Initial Screen: MultiProvider Proc.
RSDMPROM Initial Screen: MultiProvider Proc.
RSDMWB Data Mining Workbench
RSDODS Initial Screen: ODS Object Processng
RSDODSD Initial Screen: ODS Proces. (Deliv.)
RSDPMDDBSETUP Creates a MOLAP Database in MSAS
RSDPMOLAPDS MOLAP DataSource creation
RSDPRFCDSETUP Create MOLAP Rfc Tests
RSDSD DataSource Documentation
RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
RSDV Validity Slice Maintenance
RSD_ACAT Maintain InfoObject catalog
RSEDIT Old editor
RSEIDOCM Variant for RSEIDOCM
RSENQ Display of Lock Log
RSEOUT00 Variant for RSEOUT00
RSFH Test Transaction Data Extractors
RSFLAT Flat MDX
RSFREQUPL Frequent upload from source systems
RSGWLST Accessible Gateways
RSH1 Edit hierarchy initial screen
RSH3 Simulate hierarchies
RSHIER Hierarchy maintenance w/o AdmWB
RSHIERINT Hierarchy maintenance from AdmWB
RSHIERSIM Simulate hierarchies
RSICUBE Maintain/Change InfoCubes (Internal)
RSIMG BW IMG
RSIMPCUR Load Exchange Rates from File
RSINPUT Manual Data Entry
RSIR_DELTATRACK KPro Delta Tracking
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLDAPSYNC_USER LDAP Synchronization of Users
RSLGMP Maintain RSLOGSYSMAP
RSMD Extractor Checker
RSMDCNVEXIT Conversn to Consistent Intern. Vals
RSMDEXITON Activate Conversion Routine
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSMONCOLOR Traffic light color in the Monitor
RSMONITOR_DB D&B Integration
RSMONMAIL Mail Addresses for Monitor Assistant
RSNPGTEST Test Network Plan Control
RSNPGTEST2 Test Network Plan Control
RSNSPACE BW Namespace Maintenance
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
RSOCONTENT Administration of a Content System
RSOCOPY Copy from TLOGO Objects
RSODADMIN Administration BW Document Managemt.
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSPFPAR Display profile parameter
RSQ02 Maintain InfoSets
RSQ10 SAP Query: Role Administration
RSQ11 InfoSet Query: Web reporting
RSRAJ Starts a Reporting Agent Job
RSRAM Reporting Agent Monitor
RSRAPS Manages Page Store
RSRCACHE OLAP: Cache Monitor
RSRCATTTRACE Catt transaction for trace tool
RSREP BW Administrator Workbench
RSRFCCHK RFC destinations with logon data
RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
RSRQ Data Load Monitor for a Request
RSRR_WEB Report-Report Interface in Web
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
RSRVALT Analysis of the BW objects
RSR_TRACE Trace Monitor
RSR_WEB_VARIABLES Variable Entry in Web
RSSCD100_PFCG Change Docs for Role Administration
RSSCD100_PFCG_USER for Role Assignment
RSSCM_APPL Application settings SCM4.0 and BW
RSSD Access for scheduler
RSSE Selection start InfoCube
RSSGPCLA Maintain program class
RSSG_BROWSER Simple Data Browser
RSSM Authorizations for Reporting
RSSMQ Start Query with User
RSSMTRACE Reporting Log Authorization
RSSTARTMON Starting the monitor in parall.proc.
RSSU53 Display authorization check BW
RST22 Old Short-Dump Overview
RSTB Choose Object Name
RSTBHIST Table history
RSTG_BUPA Target Group Sel. Business Partners
RSTG_CUST Target Group Selection Customers
RSTG_DB Target Group Selection D&B
RSTG_DB_WEB Target Group Selection D&B
RSTPRFC Create Destination for After-Import
RSU0 Update rules overview
RSU1 Create update rules
RSU1I Create update rules
RSU1O Create Update Rules
RSU2 Change update rules
RSU2I Change update rules
RSU2O Change Update Rules
RSU3 Display update rules
RSU3I Display update rules
RSU3O Display Update Rules
RSU6 Delete update rules
RSU6I Delete update rules
RSU6O Delete update rules
RSU7 Data Extraction: Maintain Parameters
RSUSR003 Check standard user passwords
RSUSR200 List of Users per Login Date
RSWELOGD Delete Event Trace
RSWEWWDHMSHOW Display Background Job SWWERRE
RSWEWWDHSHOW Display Work Item Deadline Monitorng
RSWWCLEAR Execute Work Item Clearing Work
RSWWCOND Execute Work Item Rule Monitoring
RSWWDHEX ExecuteWorkItemDeadlineMonitoring
RSWWERRE Start RSWWERRE
RSZC Copying Queries between InfoCubes
RSZDELETE Deletion of query objects
RSZT Get Test Component
RSZTESTFB Shortcut Function Test Environment
RSZV Call up of view V_RSZGLOBV
RSZVERSION Set frontend version
RS_AWB_REMOTE Remote AWB Staging
RS_BCT_BWBEOTYP Maintain BW Backend Object Types
RS_DS_CHECK Check consistency request
RS_ISTD_REMOTE Maintain InfoSource
RS_LOGSYS_CHECK Source System Tool
RS_PERS_ACTIVATE Activation of BEx Personalization
RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
RS_PERS_VAR_ACTIVATE Activate Variable Pers.
RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
SP01 Spool

How to display "All Items" using a "Filtered Rows" Combo Box

Hi
How do I make a Combo Box with "Filtered Rows" show "All Values" by default, AND have the option to select individual filters?
If my data was
North
South
East
West
I would want the Combo box to display
ALL
North
South
East
West
When the user selected:
North, they should see just the filtered rows with North
South, they should see just the filtered rows with South
ALL should be the default, and it should ifilter/include North, Soutn, East and West (i.e. showing all the rows)
I need to use a Combo box and Filtered Rows, because I actually want to filter my dataset using multiple columns:
Company, Region, District, Sector, Value
My current method is to:
use a Combo to filter the RawData on Company into an Intermediate_Company worksheet
use another Combo to filter the Intermediate_Company worksheet on Region into an Intermediate_Region worksheet
use another Combo to filter the Intermediate_Region worksheet on District into an Intermediate_District worksheet
use another Combo to filter the Intermediate_District worksheet on Sector into an Intermediate_Sector worksheet
then display in a List View from the Intermediate_Sector worksheet.
Any comments on this method would also be welcome.
Thanks for your help
Stuart

Thanks Muwa
I've uploaded a non-working version here: http://www.teradepot.com/ntxgoo6629zi/Simple_All_Combo.xlf.html
I've figured out how to use tthe filter to copy a subset of the rows in the source date to the destination are of the worksheet.
I can't figure out how to use a filter to copy ALL the rows in the source to the destination.
I've seen hints about using hidden filters, but I can't make this work, either. It's quite depressing, really
I'm very grateful for any help you can give.
Thanks in advance
Stuart

Get all object using RandomAccessFile

hi friends,
i have one log file and this log file contain some object. and i am used Serializable Interface.
i know basically object are not readable format, but consider log file(logInfo.log) contain some object like:
12 javasun
20 sunjava
38 java
96 sun
like wise
am using RandomAccessFile class and this my
raf.writeInt(baos.size());
raf.write(baos.toByteArray());
raf.seek(0);
int a = 0;
while(true)
a = raf.readInt();
System.out.println("The pointer Value : " + a);
byte[] b = new byte[a+4];
int x=(int)raf.getFilePointer();
System.out.println("file Pointer : " + x);
raf.read(b,x,a);
ByteArrayInputStream bais = new ByteArrayInputStream(b,x,a);
ObjectInputStream ois = new ObjectInputStream(bais);
Record rec = (Record)ois.readObject(); //here record is object
System.out.println("The object : "+rec.getAttributes());
using this code i got below result
12 javasun
but i can't get all object from the file(logInfo.log)
how can i get all object? help me!!!...
Thank You

ok, sir
i tried and i got all object from the file. Thank
you,
and,
if i need last two object from file(logInfo.log)
like
38 java
96 sun
how can i get? please give some clue or code
Thank youSince you don't have a set size for the objects, then you will have to read through the entire file always keeping the last two objects, and as soon as the read fails return them.
As I said in your first thread, however, you would be much better off writing the objects with a set size (i.e. calling ByteArrayOutputStream(size) with a single max size rather than ByteArrayOutputStream( ) ) as you would then be able to use seek adding 4 (for the int) to size and multiplying by the position of the recordset you want to read (0 for the first). You would then, also be able to overwrite records and the such (which is the usually one of the main reasons for using something like RandomAccessFile, i.e. creating a Flat DB-Like File).
Edit:
And you would probably lose the int, then anyway (when using a set size), as it wouldn't be needed.

In background how to display all fields using reuse_alv_list_display

Hi all,
        I have output table with 100 fields,when i ran in background its giving the output with out alignments,how to make the whole record in a single line,presently it displays each record in a 3 rows,please help me
thanks
Sriman

Hi,
   In fore ground it displaying all columns but when i ran in background its giving all fields but the each record contains rows,i need to make it as single line
the code i have written for this is.
for background is there any parameter to add for this code.help me
ls_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = repid
      it_fieldcat        = it_fieldcat
     it_events          = events_b
      is_layout          = ls_layout
    it_events          = it_events
        is_print           = ls_print
      i_save             = 'X'
    TABLES
      t_outtab           = t_ce1jab1.
thanks
sriman

Required a program to list out custom dependent object used in a program

sorry already in the forums
Edited by: Krishna Gowrneni on Jul 16, 2009 7:51 PM
Edited by: Krishna Gowrneni on Jul 16, 2009 7:52 PM
Edited by: Krishna Gowrneni on Jul 16, 2009 7:53 PM

Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
     EXPORTING PROGRAM    = P_NAME
     TABLES    INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
    SEARCH PROGTXT FOR ''''.
    IF SY-SUBRC = 0.
      DO.
        SHIFT PROGTXT LEFT BY 1 PLACES.
        IF PROGTXT(1) = ''''.
          SHIFT PROGTXT LEFT BY 1 PLACES.
          DO.
            SHIFT PROGTXT RIGHT BY 1 PLACES.
            IF PROGTXT+71(1) = ''''.
              SHIFT PROGTXT RIGHT BY 1 PLACES.
              CONDENSE PROGTXT.
              FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
            ENDIF.
          ENDDO.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.

How to get list of custom objects used in abap report program?

Hi friends,
I have a requirement in which I have to scan the entire abap report and retrieve list of custom objects used in it for example custom tables, data elements, structures, table types etc,. Is there any provision in SAP like fuction modules to do this functionality? As of now I am coding everything manually where so many possibilities are there for all kinds of objects. Provide your answers and suggestions...
Thanks,
Nastera

Hi,
The best way to do this is environment analysis. Follow the steps:
1. Open se38, type in the program name (don't click on on display/change or create button, stay on first screen only)
2. Click on environment analysis button (hot key SHIFT+F4)
3. It will throw a pop-up, which will ask for type of object you want to see, which are linked /used by this program. select all (or may be if you are only interested in Tables, then select table only)
4. Hit 'Enter'
You will get the full list of all objects used in this report program. Just note down the one which starts with Z or Y and that's it.
Cheers,
Anid

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to identify various objects used in code

Hi All,
Can anyone tell me how can I list down various objects used in a program.
For example in a report program if I am calling a function module, calling an include program, implementing a class and so on. Now I want to list down the objects used in the above program.
Thanks in advance,
Venkat

This can get you started.
DATA:
code_rec(132),
itab LIKE STANDARD TABLE OF code_rec.
DATA:
obj_text(40),
it_search LIKE STANDARD TABLE OF obj_text.
PARAMETERS:
prog        TYPE sobj_name.
START-OF-SELECTION.
PERFORM search_table.
REFRESH itab.
READ REPORT prog INTO itab.
CHECK sy-subrc = 0.
LOOP AT itab INTO code_rec.
    TRANSLATE code_rec TO UPPER CASE.
    LOOP AT it_search INTO obj_text.
      SEARCH code_rec FOR obj_text.
      CHECK sy-subrc EQ 0.
      WRITE:/ 'Found ', obj_text, 'in', code_rec.
    ENDLOOP.
ENDLOOP.
*&      Form search_table
FORM search_table.
REFRESH it_search.
PERFORM add_a_search USING 'CALL FUNCTION'.
ENDFORM.                    " search_table
*&      Form add_a_search
FORM add_a_search USING p_text.
obj_text = p_text.
TRANSLATE obj_text TO UPPER CASE.
APPEND obj_text TO it_search.
ENDFORM.                    " add_a_search

Safari doesn't display an object with MIME type video/mp4

So, I've got a little hiccup here. I put together a CV in html with samples you can click to bring up. Now, I don't make any claims to professional geekdom, but I try to be fairly html savvy, and since I'm sending this to the college IT guys, I want to do it right. So I'd like this thing to use valid w3c compliant html. Not too tough, fix some missing quotes and learn how to use the object tag instead of embed. Done.
Well, here's the problem. I loaded it into Safari for testing, and a Quicktime file won't play. Now, it runs fine on Firefox. The obtuse and awkwardly lumped in IE version of the object works fine (tested in IE6, Win2K virtual machine). And the same file ran fine when I had it using an embed tag. Now it just brings up the Quicktime emblem, takes up the specified amount of space, and doesn't do anything.
What did I do wrong? I've got the latest Quicktime and Safari, and I know it's standards compliant. Do I have to feed it some more specific type for an h.264 encoded mp4?
Here's the code I used. The embed tag is the one that works, the object tag is the compliant one that doesn't. I'm guessing I'm missing a parameter or something. Any advice?
<embed scale="1" src="files/Sabres.mp4" pluginspage="http://www.apple.com/quicktime/download/" autoplay="FALSE" volume="100" cache="TRUE" height="496" width="640">
<object type="video/mp4" data="files/Sabres.mp4" height="496" width="640">
<param name="controller" value="true">
<param name="autoplay" value="false">
Your browser cannot display this content. Click here to download it.
</object>

Tom and Kirk, thanks for your time. That would work, but since <embed> is a non-standard tag, I want to avoid it.
Andy, I actually stopped by that site last night, and I did use it for the object code.
My problem is that for some reason, what looks like a legitimate implementation of <object> isn't displaying in Safari. I know Firefox is a bit more forgiving of sloppy code, so I don't blame Safari for that one. I know Safari can display the file because it displayed it properly when I called it with embed. I'm just not sure what's wrong with the code that's making Safari not bring up the video. It knows it's Quicktime and loads the file, I know that, because it brings up the emblem and starts hoarding RAM when I bring it up in Safari, but it just holds there. I've tried a couple MIME types, including video/quicktime and video/mp4, both worked in Firefox, and video/h264 just as a shot in the dark, and both Safari and Firefox showed the alternate content.
By the way, here's the full code I used to display the object, using Castro's cloaking technique for IE compatibility. I omitted it earlier because when I isolated the non-IE section alone in the body of the document it behaved the same as it did with the cloaking (working in FF, broken in Safari).


<object type="video/mp4" data="files/Sabres.mp4" height="496" width="640">
<param name="controller" value="true">
<param name="autoplay" value="false">
Your browser cannot display this content. Click here to download it.
</object>

Message was edited by: The Spine

BI content report - overview of all objects created in Integrated Planner

Hi.....we need to create a report containing an overview of all objects used in Integrated Planner. Do we have any standard BI content query or WAB application that meets our requirement? Please let me know whether any multiproviders exists for the same which i can use to create reports.
Some of the tables involved are:
RSPLS_ALVL
RSPLS_ALVL_IOBJ
RSPLS_ALVLT
RSPLS_CR_STEPS
RSPLS_SEQUENCE
RSPLS_SEQUENCE_S
RSPLS_SEQUENCET
RSZELTDIR
RSRREPDIR
RSZCOMPDIR
RSZELTTXT
thanks,
Lokesh Nandula

hi.. try dragging in the currency field corresponding to the amount also in row/column

Regd using of lock object in an abap program

Hi all,
     i have created an lock object but doesnot know how to use that lock object in an abap program. can anyone guide me how to use lock object in an abap program.

check this sample for Production Order.
<b>* Lock request for order
call function 'ENQUEUE_ESORDER'
exporting
   aufnr                = p_aufnr
exceptions
   foreign_lock         = 1
   system_failure       = 2
   others               = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.</b>
Regards
Prabhu

Is there a tool that could export objects used in a report program?

Hello Experts,
I'm new in ABAP programming, recently my team members wanted to find a tool in the SAP system, which could export a list of objects that used in a report program. For example, I want to figure out what function modules and classes are used in a report program, using the tool, I could get a list that have the name of the modules and classed used and even source code of them.
The function of the tool acts like 'where-used list' showed in the SAP system, but the differences is I do not have to type the name of the objects. The tool is just focus on the specific report program and list the name and source code of the objects used in that report program.
Hope I explain this clearly.
Is SAP system has such tools? Please give me some hints on this.
Thanks you all for the time and help in advance.

Hi Anna,
Welcome to ABAP world,
Check this link
How to identify various objects used in code
hope this is useful to you.
and also seach in the SCN you will find more.
Regards!

Display all objects used in a program

Similar Messages

Maybe you are looking for