Display an error message during a few seconds

Hi!
When submitting a form, I am displaying a error message saying that the actions performed work fine. Afterwards I would like this message to disappear after a few seconds. How can I do that ?
in the function called by my action button that submit the form i have:
public void saveForm() {
// .... operations ....
context.addMessage(null,new FacesMessage("Everything is ok"));
}

Hi,
I doubt if there is anything you can do from the action method
saveForm(), however this you can do it from the client side just
put some seconds delay in onload method in javascript and
redirect to some other page.
Thanks
Ansar

Similar Messages

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Windows XP displays "Disk Error" message during initial setup

I have gotten as far as choosing C:Partition3 <BOOTCAMP>[FAT32]. Windows setup then copies a bunch of files, initializes and then restarts and tells me to press any key which I do then I get a disk error and have to do a hard restart. I am never taken to the screen where I am to choose between NTFS and FAT so that I can format the partition.

A SOLUTION TO "INSTALL XP PRO SP2 INTO BOOTCAMP WITH LEOPARD, BUT NO OPTION TO FORMAT PARTITION"
After spending 14 hours trying to follow each and every leads in various discussion rooms, i was overjoyed to finally see the Windows logo on my screen.
THANK YOU TALEZ !
I followed carefully what he and Paul Thurrott's Supersite instructed. Below is Talez's advice:
Check to see if there is a file named "winnt.sif" inside the I386 folder on the Windows XP CD.
If there is follow these instructions to rebuild the Windows XP CD:
http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp
Skip steps 2 and 3 (since you already have SP2 built in) and remove the "winnt.sif" file from the I386 folder before going on to step 4.
If this was not working, my last option would be to reformat the whole Mac HD, install Windows, re-install Leopard and retrieving my data from Time Machine - although this is highly risky and not recommendable.

Display an error message in Portal during creation of Object Link

Hi,
I have a requirement where I need to throw an error message in Portal during creation of Object Link.
The requirement is whenever the user clicks on Item and try to create a Object Link for Material-Plant combination, if the Mat-Plant combination exist, than I have to throw/display an error message.
I tried for some enhancements in BAPI_BUS2172 but it does not work out.
Please help.
Thanks in advance.
Arbind

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

When I sync with my iphone i get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage. How do I turn this message off?.

Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

Display Custom Error Message in OIM 11g

Hi,
I'm trying to display an error message from a validation event handler but seems that am missing something. When the "oracle.iam.platform.kernel.ValidationFailedException" is thrown from a validation handler an error message is displayed: "An error occurred". If an error code is provided (see code below) then the message looks like: "An error occurred. The corresponding error code is ERR-0001". I guess that some resource bungle with corresponding messages should be provided.
the code used:
package test;
public class UserGeneralValidationHandler implements oracle.iam.platform.kernel.spi.ValidationHandler
@Override
public void validate(long processId, long eventId, Orchestration orchestration)
throws ValidationException
String errorCode = "ERR-0001";
String message = "Simple validation message.";
ValidationFailedException ex = new ValidationFailedException(message);
ex.setProcessID(processId);
ex.setErrorCode(errorCode);
throw ex;
Q:
1.What is missing for complete solution?
2.What is the algorithm that used by OIM to find default or non default resource bundle?
3.How to change out-of-box validation messages? For a sample "The organization ABC does not exist." message is shown if non existing organization is provided during user creation and I'd like to have a different one.
Regards
Serge

rename OIMUI.jar to OIMUI.zip
find logging_en and loggin.properties.
Modify the "IAM-2050512" error message with your custom message
Find Agent and agent_en.properties.
Find Note[ERROR_SUBMITTING_REQUEST].text. Modify the message. Make sure the message must be the same with in logging.properties("IAM_2050512")
Deploy
change the OIMUI.zip to jar
replace the existing OIMUI.jar
login to weblogic and redeploy OIM (oim.ear)
no need to restart OIM server.
Test:
create a request in web console again, you must see the custom message when you hit the submit button
hope this helps.
-rad

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

Missing MSVCR71.dll Error Message During Launch

I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch. The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that. I did not write down the error message before fixing the problem). There is an “OK” button below the message to continue loading Adobe Encore.
The error message is only displayed if all other CS5 programs are closed. During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application. The Component can be located here: http://www.xiph.org/quicktime/
When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed. Juicer will run without the Component, but gives a message that it is missing. I have removed the Component since I use Encore to a much greater extent.
To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above. I should also note that I am using Windows 7 Home Premium.

Greetings,
My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime. Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
Control Panel
Windows Firewall
Advanced Settings
Outbound Rules
New Rule...
Program/Next
This program path: (use Windows Explorer to search)
c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
Allow the connection
(Leave checks Domain, Private, Public)/Next
Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
Good luck, Michael

HTMLB control for displaying clientside error messages

Hi all,
I want to display client side validation error messages in a JSP DynPage.I have tried MessageBar but it can't be accessed from JavaScript file.Becuase of that i couldn't write error messages from .js file using MessageBar.Can U plz tell me is there any other HTMLB control or other way to display clientside error messages.
Urgent
Thanks
Sampath.G

Hi Sampath,
I have an idea to use message bar in client side.
1.First create a div at the begining of a page which is always visible.
2.create some hidden div tags which contains message bars with different error or information messages.
3. during the validation in javascript if u want to show error message just assign the content of hidden div tag
to visible div tag.Now u will get error message as like real message bar.
Then in javascript just write this code
document.getElementById('sample').innerHTML=document.getElementById('Error').innerHTML
where sample-->id of visible div
Error-->id of hidden div inside which u need to write the code for messagebar
this wiil show the error message at the place of visible div (sample).
<b>Note:</b>
If u want to change the messageBar text dynamically that can be possible only through server side only using bean to set and get error messages.
I am not able to give some sample coding since the code button throws some script error.
Ragards,
Tamil K

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Displaying Custom Error Message in ALV

Hello Experts,
Usually, when an error occurs in editable ALV, the standard WD ALV functionality marks the particular error cell in red and displays the error message.
I want the same functionality for custom error messages in event ON_DATA_CHECK. I'm able to display the message, but looking for a way to mark cells as well.
Please help....

Hello friend,
I think this link will help you much more clear on the coloring of the ALV concepts.
http://help.sap.com/saphelp_smehp1/helpdata/en/5f/ec57c72a1349c8bfdda56d976e9399/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0625002-596c-2b10-46af-91cb31b71393?QuickLink=index&overridelayout=true
Thanks,
Sri Hari

Display custom error message in enhancement spots

Hi all,
Is there someone here who've encountered having the need to display custom error message in an enhancement spot? Could you help me please.. I can't find any reference from the net.
Thanks in advance
Regards,
Aris

Hi,
The error message can be only displayed in enhancement spots based on thr program flow.
You have to determine where its getting called for ex: in PBO or PAI etc.....
You have to find the right place to display the error messages . for ex: using a memory id ......

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Display an error message during a few seconds

Similar Messages

Maybe you are looking for