Display and use Invoice Percentg in POC on Milestones.

Hi Expert
Does anyone know is it possible?
We use PS and POC in Milestones.
Invoice Percentg is now displaied and triggered by Percentage, like if it is 60%, it is supposed to be chargeable.
Then, it is possible making it triggered by not percentage but sum of money.
Thanks
Shinya

Hi Shinya,
in Sales document you can use amount to be billed against milestone confirmation.
thanks
Sunil

Similar Messages

How can I display and use the full RAW file?

Hi,
my camera (Canon S95) has a sensor with 4:3 aspect ratio and thus saves all RAW files in this format. Additionally, the camera can automatically create JPGs with a cropped ratio (e.g. 3:2 or 16:9). This is very helpful because you can see the target format already on the camera screen (with black bars on top and bottom), which helps the composition. However, when processing the photos on the big screen afterwards, it often also helps the photo to adjust the ratio a little bit and therefore use the additional information saved in the bigger 4:3 RAW file. This works very well with many of the freely available software tools.
The problem found in Lightroom is now that it only shows the RAW photo in the cropped format and up to know I have found no way to display or use the full RAW format. So my question is: Which settings do I have to change to use the full format? What do I need to change?
Searching a little bit on the web I found many other photographes having the exactly same problem with many different cameras. However none of them reported to have a solution for this. Still I am pretty sure that there must be a solution, since otherwise this would be a really heavy bug within Lightroom and I cannot imagine that Adobe would leave this matter unsolved.
So I would really appreciate if someone could help me with this.
Many Thanks
Martin

Hi Jao, Victoria, Lee Jay,
Thanks for clearification. Do you have additional information about when this fix will be available and whether at least some popular old cameras will be supported?
What I do not get is why Adobe would need to redo all existing cameras. I think this is a more general issue, where Lightroom misinterpretes the exif data which includes both the exif image height/width as well as the cropped image height/width. Intepreting this information correctly, any software should be able to display both - the full image and the cropped area (as shown by many cheap or free software tools). In the internet I found another workaround for the issue in Lightroom, which is undermining this point: When setting the cropped image height/width to the numbers of exif image height/width manually (e.g. with exif tools), Lightroom actually is able to display the full 4:3 picture.
So this bug should be easily fixed for all cameras and I have no clue why Adobe still has no fixed it with Lightroom already available in version 4.2.
Cheers
Martin

HI, i am using a 17inch macbook pro which i bought in January 2011. Lion 10.7.3. I have used a HDMI cable from my second display and used the thunderbolt adaptor to get access to this second screen. However, every time i do this,i lose my internet? help?

I am using a 17inch macbooj pro that i bought in Jan 2012. Runs Lion 10.7.3. I used a second non apple screen and used a thunderbolt (DVI to thunderbolt) adaptor to used my screen. However everytime i do this my macbook pro loses its internet connectivity. I also use the firewire for my audio external soundcard but dont think this makes any difference.
Any help please?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Keywords displaying and using

Hi
I have two questions on using keywords:
1) how do I make the keywords pane stay on screen? If I move from one event to the another when adding keywords I lose the keyword pane and have to do command k to get it back. Very frustrating when trying to organise a lot of photos
2) once I have set a keyword to a photo is there a way of displaying that keyword under the actual photo rather than only in the keywords pane and the info sidebar? I used to be able to do that in adobe elements on my old PC and that made it much easier to look at a screen of photos and see which had been key worded and the keyword is.
Many thanks

No and No.
IPhoto menu -> Provide iPhoto Feedback for feature requests.
Regards
TD

Is it possible to use the Intel graphics for the display and use the NVIDIA GPU for rendering at the same time?

I have been trying to figure this one out for a couple of days. I found the CUDA mac drivers on NVIDIA's website and installed them. I have been working in Blender. After the driver install I can now switch between CPU and GPU processing, Great. It works, but I am not experiencing decreased render times like I had read about or expected. It's about the same. While using the GPU for rendering, my OS is choppy, leading me to wonder if there is a way to use the NVIDIA just for computing power?
Any help would be grand.
Thanks

No.

Is there a switch I can use with thunderbolt display and 2 computers

I have the new Mac Mini and the new Macbook Air plus the 27 inch thunderbolt display. The majority of the time, I will be using the thunderbolt display hooked up directly to the Mac Mini. I have already tested the theory that if I turn off the Mac mini, I can use a separate thunderbolt cable to hook to the port on the back of the display and to the port on the Air and have it show up on the screen. Many people said this was not possible as the port on the back of the display was only unidirectional and to be used for thunderbolt accessories like hard drives. It actually works quite well and so at the very least, I can leave the cable plugged into the back of the display and use it with the Mac Air if I turn off the Mac Mini. At least I don't have to remove the cable from the Mac Mini and move it over to the Mac Air. I actually looked at the Kanex switch which would do what I wanted it to do, but unfortunately it says it will NOT work with the thunderbolt display. Apparently it only works with the Cinema display. Does anyone know if there is a thunderbolt switch out there?
Thanks

Thanks, Clinton....that's what I was thinking too. On the upside, I don't have to remove the actual thunderbolt display cable going to the back of the Mini, I just have to keep a cable in the output port on the back of the display for my Macbook Air. Then I just turn off the Mini, plug the cable into the Air and I'm ready. What I find interesting though is that the Kanex "looks" like it will do exactly what I want it to, but apparently it will only work with Mini Display port like that found on the "cinema display". Maybe one day........
Thanks again!

Difference between shipping invoice and fiscal invoice?

Helo.
Can anyone tell me the difference between Shipping Invoice and Fiscal Invoice?
Regards
Points are assured

Hi Kulkarni,
Invoice Processing
Process
You can use this business process to display and process invoices both in SAP Enterprise Buyer (SAP EBP) and SAP Supplier Self-Services (SAP SUS).
As supplier or service provider, all invoices that you enter or process in SAP Enterprise Buyer must be approved by a responsible internal employee. For goods and services with a low purchase value, invoices and credit memos can also be created without a purchase order reference. Moreover, it is also possible to create express invoices in the check status application.
In SAP Supplier Self-Services (SAP SUS) invoices can be entered with reference to a purchase order, shipping notification, or contact person before they are sent to the customer.
If, following a purchase order, the goods supplied or the service provided turn out to be defective or the price charged is too high, you as an internal employee, supplier, or service provider, can enter and process credit memos or subsequent debits/credits in SAP Enterprise Buyer
i think the invoice generated during a particular fiscal year is fiscal invoice.
thanks
sekjar

Setting up displays and preview monitor with Quadro FX1700

Hi,
I am using a Quadro FX1700 graphics card with two DVI displays and a montitor with component connection to the PNY breakout box. I want to have a spanned desktop on my DVI displays and use my component monitor to preview video in Premiere.
Is this possible (it should be as the card is designed for use with premiere) and how do you d set it up? The nVidia control panel only seems to allow two displays at one time..!!
Thanks!!!
Tim

Perhaps this will help:
FAQ:How do I use two monitors?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

23" Cinema Display: Can't disable MacBook display to use only the cinema?

Hi,
I just bought a 23" cinema display with the intention of using it exclusively while I use a wireless keyboard and just keep my MacBook closed. I notice that when I set the display preferences to "mirror," the quality of the cinema display reduces greatly, since it's only able to be set at the maximum display resolution allowed for the MacBook when mirroring. This seems to defeat the purpose of having the cinema display. So, I guess I have several questions:
1. Can I close the MacBook without it going to sleep?
2. Can I make the cinema display the primary display (with application menus, etc.)?
3. Can I disable the MaBook display and use only the cinema display?
Thanks,
Stew

1. Can I close the MacBook without it going to sleep?
No, but if the power adapter is connected, you can wake it with the external keyboard or mouse (make sure wake-up is enabled in the Bluetooth system preference), and it will continue to run with the lid closed.
2. Can I make the cinema display the primary display (with application menus, etc.)?
Yes. In the "Arrangement" pane of "Displays" system preference, turn off mirroring and drag the picture of the menu bar to the picture f the external display.
3. Can I disable the MaBook display and use only the cinema display?
Yes. Close the lid.

Display parked vendor invoice and scanned invoice in same screen

Hi,
When a user from his business workplace, displays a parked vendor document, they need to choose
"Services for Object-> AttachmentList" to display the scanned document connected.
I have a request to make this scanned document being displayed directly in a split screen together with the
parked document.
In workflow method RELEASE is being called when user from his business workplace enters a document.
Method RELEASE is calling screen 700 to display the parked document.
If I make a new method ZRELEASE, I could make my own screen displaying parked document and scanned invoice in a split screen.
That would be possible right?
But I have no idea how I get the scanned document, is there any methods or function modules for this ?
Anyone have an idea ?
Br
Andreas

Hi ,
Please see this link for the retrieval of scaaned copy.
they are using FM to retrieve scanned document ARCHIVOBJECT_DISPLAY to display the associated file
[url] ArchiveLink buffer issue
Regards,
GIrish

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

HT4885 how do i use a macbookpro with a thunderbolt display and have an external projector

I bought the latest macbook pro with a 500 gig solid state drive 8 gig ram etc and a thunderbolt display, is use it with lappy lid down and external key board and mouse, so like an imac or tower. i want to add a matrox 3 display splitter in line to have 1-3 projectors for film and vj etc.
i can add it straight out of the lappy as one would expect, but now i find after vast expense i can only add another thuderbolt display out of the display port on the thunderbolt display!.
This is such a scam from mac.......what are they playing with. Is there any good solutions out there. I spend alot of money and can cant use projection and a thunderbolt display at same time......very disapointed on this one.....its a postitive backward progression on there part.....
its fine on the road, but doing mxed media presentaions from my work place is now not possible with my lovely big display as well.
there must be a away round this.....Am i being dumb.
thanks for any help in advance.
cheers

Here's what apple documents on the limitiations of chaining with TB displays:
Apple Thunderbolt Display (27-inch): Connection options for Thunderbolt Macs

Can I connect my 2 2010 imac's to each other and use one as a second display?

I have 2 Imacs purchased in 2010. Both have a mini display port on the back. Can I connect them using a 2 male mini display cable and use the 2nd Imac as a 2nd display?

Hi, if one of your iMac is a 27 inch one, you will be able to do it. see this article for further information: Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)?

To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

Display and use Invoice Percentg in POC on Milestones.

Similar Messages

Maybe you are looking for