Display attribute is changed to nav in a cube.

I have change a display attribute to navigational attribute.
Now if I run a BEx report on this cube, I dont get values for this nav attribute.Instead of value the column is displaying 'not assigned'.
Please tell me what could be the reason?

Hi,
To change a display object to navigational attribute you need to make changes at two places.
1. At the infoobject maintaince level
2. Other at the infocube level.
Try to change at these two loactions.

Similar Messages

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

Why is there increased overhead(performance) in NAV than DISPLAY attribute?

Hi,
I understand that navigational attibutes lead to increased overhead because of the additional joins: The join between Fact table and dimension table ( I guess on DIM ID) and then the additional join between the Dimension and the Master Data tables (I guess on the SID).
1.
What happens in the case where the attribute is NOT a Nav but DISPLAY? Can you modify the above paragraph for me if it were a DISPLAY attribute? Isn't the display attribute also in the Master Data table and won't there also be an additional join?
2.
So when a query runs, which of the joins takes place first? I am trying to get the order whether it is from inside to the outside or outside to the inside? When you execute a query does the join between the master table and dimension table take place first then the join between the dimension and fact table next? Or the reverse?
Explanation with examples will be very help.
Thanks
Edited by: Amanda Baah on May 10, 2011 10:42 AM

hi,
I understand that navigational attibutes lead to increased overhead because of the additional joins: The join between Fact table and dimension table ( I guess on DIM ID) and then the additional join between the Dimension and the Master Data tables (I guess on the SID).
The above understanding is correct
1.
What happens in the case where the attribute is NOT a Nav but DISPLAY? Can you modify the above paragraph for me if it were a DISPLAY attribute? Isn't the display attribute also in the Master Data table and won't there also be an additional join?
In both the cases the joins formed will be as per the above statement, however in case of navigational attribute the query fetching the data stores the data independent of master data such that you are able to do navigation/drill down independently on the values.
2.
So when a query runs, which of the joins takes place first? I am trying to get the order whether it is from inside to the outside or outside to the inside? When you execute a query does the join between the master table and dimension table take place first then the join between the dimension and fact table next? Or the reverse?
the schema structure is fact table at center then the dimension tables and then the SID tables. when query is executed it first fetches data from Fact table then retrieves entries corresponding to those in DIM tables and after that SID tables.
regards,
Arvind.

Change from display attribute to compounding attribute

Hi,
I have 3 info objects as display attributes of another infoobject. I want to change them to be compunding attribute instead of display attribute but I'm not able to delete them from the attributes list. Please let me know how can that be done.
Thanks
Nitika

Hi,
you need to empty the master of the IObj for which you want apply your changes.
Delete its master data.
Of course you'll need to delete first all the objects (cubes, ods, or other IObjs) where this IObj is used...
hope this helps...
Olivier.

Navi attri & display attribute

Hi experts
Could any one explain clearly about the function and use of -
Navigational Attributes
Display Attributes.
I am very thankful if any one explain about...
Thanks
Deepali

Hi,
You can go through the below documents.
http://help.sap.com/saphelp_scm70/helpdata/EN/58/2b8e39e1ba3541e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_scm70/helpdata/EN/43/d7419fb96c0236e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_scm70/helpdata/EN/07/9a7bce1d4811d2b42e006094b981ac/frameset.htm
Display and navigational Attributes
Hope this can help.
regards,
kaushik

How to display attributes in the query

Hi frnds,
I want to show the attributes of material ( mat group , mat type ), vendor ( Sort field ) in the report.
We loaded master data for material and vendor.
I dragged the char and the relevant attributes in the query designer and executed the query. But in the output the attributes values are not displayed.
What could the reason ?
Regards,
V N.

Hi all,
Thanks for the reply.
"Display attributes will also get displayed if you include the infoobject for which they are attributes."
Suppose for 0vendor the attr is 0sortl. By defualt it is display attr. I dragged in the query the 0vendor and its attr 0sortl and executed. It didnot displayed any values for this 0sortl
I changed it to Nav Attr. And rerun the query, it is displaying values.
In the first case i included Display attr and the infoobject for which it is attr in the query. Please explain me why it didnot displayed the values.
And after changing it to Nav attr it displayed the values.
Please explain me what happened actually.
Regards,
V N.

How to display attributes in smartview through MDX

Hello Everyone,
I am trying to execute a MDX query in SV where I want to see the man months by individual project. I also want to see projects by level 0 of an attribute dimension. I got the first part working where I see man months by level 0 projects. However, I am not sure how can I make this query display the attributes too.
Here's my MDX -
SELECT {[OracleAcct].[Man Months]} ON AXIS(0)
, {([Tot_Project].Levels(0).Members)} ON AXIS(1)
FROM Aso_rep.Aso_rep1
WHERE
([Employee],
[Department],
[Currency].[USD],
[Exp_Type],
[Tasks],
[Period].[YearTotal],
[Scenario].[APF],
[Year].[FY11]
Thanks in advance !!

Hi all,
Thanks for the reply.
"Display attributes will also get displayed if you include the infoobject for which they are attributes."
Suppose for 0vendor the attr is 0sortl. By defualt it is display attr. I dragged in the query the 0vendor and its attr 0sortl and executed. It didnot displayed any values for this 0sortl
I changed it to Nav Attr. And rerun the query, it is displaying values.
In the first case i included Display attr and the infoobject for which it is attr in the query. Please explain me why it didnot displayed the values.
And after changing it to Nav attr it displayed the values.
Please explain me what happened actually.
Regards,
V N.

Crystal didn't show the BEx query Attributes description changes/Values

We experiencing the BEx query attributes/crystal report issue.
I create a crystal report using BW- BEx query. Bex query displays the attributes values. But in crystal report side it didn;t show up the values as well as description changes.
But If I change the display properties of attributes (different from one attribute to another) the crystal report reflect the values. But crystal report didn't show the Attribute description changes , the one i did it in BEx query side.
Example:
Bex has a Masterdata as well as attribute Field1, Field2 etc.. I changed the description like Field_Test1 and Field_Test2. Also I changed the display property for Field_Test1 is Key and text and long , Field_Test2 is Text & LOng text.
I got the attribute values is crystal report Xi R2. But crystal didn't reflect the description changes?
Suggestions Please?

Post your question to the Business Object Integration Kits forum

Keyfigure display attribute not visible in the report

Hi,
I am facing a problem. I have keyfigures as display attributes in my master infoobject. Earlier I was able to see those display keyfigure attributes in my query and was able to use them in it. After that, few changes were done to the master infoobject (addition of few attributes and deletion of few - but none of them were what I was using). Now after the change, when I open the query in design mode, it gives me error saying that it can't access those attributes (only keyfigure display attributes) and repairs the query (removes those attributes). All the other attributes are visible.
I have already tried rsrv for the master infoobject (corrected the error) and rsrt for the query. After that also it doesn't solve the problem.
What could be the reason? Any pointers would be highly appreciated.
Thanks,
Saket

Hi,
Display keyfigure attributes are visible in the reports because I was using and running them in the reports before the change in that particular master infoobject. Only, keyfigures maintained as attributes can't be made navigational (hence can't be used for drilldown). Its only after the change, there is this error.
I had also checked the authorization for Keyfigure earlier, which I have. Therefore its not the problem.
Thanks for the help anyways! Any more pointers? Btw, I am working on BW3.5.
Thanks,
Saket

How to display attributes for a CHAR in the Excel file (BEx)?

Hi all,
I knew that I can display attributes for a CHAR (ex: attributes - address, phone#, zip code for CHAR-Customer) when I run Web- based report. But I cannot find this function after I export the file to Excel. In the context menu for excel file, I only see 'select filter'(but no display attribute values), drilldown, properties (for query). Is it something that I cannot have in the excel file for the BEx report?
Thanks
J.

Hi Bhanu,
In fact, I found that I can move IOs in the 'rows', 'column', and 'free CHARs' and so do end user by using 'local view'. That means every one can change the query definition, right?
For your last question, that was what I want to know. How can I prevent 'end users' change those query definitions? Is it about 'role' setting, right? But I am not the one to do 'role' setting.
Thanks for help. (I will asign points when the SDN system works)
J.

Error message in Bex after I make display attribute navigational

Hello,
Regarding 0FIAR_C03. There's a display attribute called "Customer Classification". I made it navigational and re-activated the cube. Thereafter, the existing queries on this cube display the following error message when I try to edit them:
1) Variable 0P_KEYD2 for characteristic Posting Date has been converted to a required entry.
2) Variable 0P_KEYD3 for characteristic Clearing has been converted to a required entry.
Does anyone understand what this means and how I can resolve it?
Thank you,
Jim

Hello Bhanu,
Yes, I can edit the query after seeing these messages.
I also received an error message within the RSA1 after I turned on the Navigational Attribute, but it seemed like more of a warning than an error message, so I was not concerned....until I ran into this error immediately upon going into Bex.
In my past experiences, I never had an issues after making something navigational, but this seems to be related to that change....
Thank you.

How to show display attributes like key and description in voyager

This question is on voyager connecting to SAP BI Query. I would like to show both key and description of the row member. It is mentioned in the guide that display attributes can be viewed and changed from the properties tab of the tab panel. But I didnt see any such option in properties tab.
Any solution for this?
Thanks
Raghu

It is a XI 3.0 version. I looked at Voyager user guide for XI 3.0 in page no 202. It is about Using Voyager with SAP
"Display attributes
Members have several string properties which are visible in Voyager:
u2022 Key
u2022 Short description
u2022 Medium description
u2022 Long description
u2022 Key and short description
u2022 Key and medium description
u2022 Key and long description
These string properties can be viewed and changed from the Properties tab
of the Tab panel.
Note: Key and text properties are concatenated into a single string, and are
therefore displayed in a single column or row caption field. They do not
appear as separate columns or rows."
Thank you very much.
Raghu

Display attributes from "global" and other entities in a single screen

As far as I know, in OPM attributes of only one type of entity can be added to any given screen.
As per of functional requirements of my current project Ihave to display attributes from more than one type of entity in some of the screens.
I found a workaround for entities which has only one instance (singleton entity in version 10.1), but couldn’t figure out how to display attributes of entities which has multiple instances.
For example:
We have an entity called “the child” which has many attributes. There can be more than one child instances defined in a given assessment session.
This particular screen should have attributes which belong to the "global" and "the child" instances.
(The names of all the children should be displayed on the screen as check boxes so the user can select the children who are affected by the global attributes displayed on the screen.)
Is this achievble in OPM 10.1?
SP1D3R MAN

Displaying Global attributes and nested entity level attributes on the same question screen cannot be done in OPM 10.1 with out-of-the-box functionality. It would have to be a custom screen. (FYI, I'm not a programmer so I can't advise on how to build such a custom screen.)
Before building customisations, you should also consider whether you really need to use an old version of the product. OPA 10.1 was released early last year; the current version is 10.3.

Displaying more than one display attribute in a tree component problem

Hi,
I have a parent table and child table, I want to display a parent table's display attribute and below that i want to display child tables two display attributes (while defining the rule for a tree compoment).
What i'm getting is :
I can able to display more than one "display attributes" for my parent table, but when i'm trying to implement that for my child table under my parent table. I am only geting the blank folder structure without names.
For example:
Parent table: Deparetment(id, name)
child table: Employee(id, firstName, lastName)
What i want is:
In a Tree:-
(Department name): software below that i want display both (firstName and LastName) stephen Fleming
for that employee.

Hi,
do you use ADF ? If yes, have a look at "master table with inline detail" option when dragging the master View
Frank

Operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?

operate C# to modify PPT's hyperlink, while configuring the hyperlink's text to display attribute, the address value will be assigned as null. Anyone know this issue? Any solution?
How to reproduce the issue：
1.Create a new PPT slide in Office2010.
2. Insert a certain text/characters, such as Mircosoft blablabla,
3. Insert an URL right after the text part , TextToDisplay is the “Test”，Address is the "Url".
4. The content in the ppt is ”Microsoft Test“，here "Test" is the hyperlink which we would like to convert. Please execute the code we list below.
5. The problem will be reproduced by the above steps.
PPT.Application ap = new PPT.Application();
PPT.Presentation pre = null;
pre = ap.Presentations.Open(mFileName, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (PPT.Slide mSlide in pre.Slides)
PPT.Hyperlinks links = mSlide.Hyperlinks;
for (int i = 1; i <= links.Count; i++)
PPT.Hyperlink mLink = links[i];
mLink.TextToDisplay = mLink.TextToDisplay.Replace(mLink.TextToDisplay,"url");
mLink.Address = mLink.Address.Replace(mLink.Address, "url");
Modify texttodisplay, the address vaule will be assigned as null. Anyone knows how to solve it?
Does it caused by a PPT API's Limitation?

I've tried the below code and it works, you can refer this article:
https://msdn.microsoft.com/en-us/library/office/ff745021.aspx
to find that the hyperlink needs to be associated with a text range, and thats what I did in the code below with the help of the link sent by Tony.
Microsoft.Office.Interop.PowerPoint.Application ap = new Application();
Microsoft.Office.Interop.PowerPoint.Presentation pre = null;
pre = ap.Presentations.Open(@"C:\Users\Fouad\Desktop\abcc.pptx", Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoFalse);
foreach (Microsoft.Office.Interop.PowerPoint.Slide mSlide in pre.Slides)
Microsoft.Office.Interop.PowerPoint.Hyperlinks links = mSlide.Hyperlinks;
Microsoft.Office.Interop.PowerPoint.Shape textShape = mSlide.Shapes[1];
for (int i = 1; i <= links.Count; i++)
Microsoft.Office.Interop.PowerPoint.Hyperlink mLink = links[i];
Microsoft.Office.Interop.PowerPoint.TextRange range1 = textShape.TextFrame.TextRange;
TextRange oTxtRng = range1.Find(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay,After:range1.Start,WholeWords:Microsoft.Office.Core.MsoTriState.msoTrue);
oTxtRng.Replace(((Microsoft.Office.Interop.PowerPoint.Hyperlink)mLink).TextToDisplay, "url");
oTxtRng.ActionSettings[Microsoft.Office.Interop.PowerPoint.PpMouseActivation.ppMouseClick].Hyperlink.Address = "http://www.microsoft.com";
Fouad Roumieh

Display attribute is changed to nav in a cube.

Similar Messages

Maybe you are looking for