Display Audio - USB setting visible, but not selectable.

I have my 24" hooked up via USB, the mic pick up works fine. But when I go to the Output and click on "Display Audio - USB" the selection *jumps back* to what I had before, in my case headphones. What am I doing wrong?

Okay, I had to unplug the headphones from the headphone jack on the front of my tower for the Display Audio Output to work.
So my next question is, how do I keep my headphones jacked in without them usurping control of the audio output?

Similar Messages

  • Airport Express USB Printer Visible, but Not Printing

    I've connected my printer (HPc7260) to my Airport Express. It is visible on the network. But print jobs get stopped and the print utility says the printer is offline.
    Any thoughts?
    +This question is also posted in follow up to a thread I started earlier, which was answered helpfully by Duane (thread: How Setup Airport Express for Wireless Printing to HP Photosmart C7280) Sorry for redundancy and clutter. I hadn't followed up on the old thread for a few days. Thought it might not get another response.+

    Solved.
    A restart, followed by reselecting the printer in the print dialog got the job done.

  • I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    have you tried rebooting your computer?

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • HT5517 I am using apple tv to connect slingbox to tv via iphone.  I get the audio to the tv but not the video.

    I am using apple tv to send slingbox picture from iphone to tv.  I get the audio to the tv but not the video.  What setting am I missing?
    Thanks

    Why is a slingbox needed?
    Connect the ATV directly to the tv.
    Keep in mind that all not all apps on iOS device allow sending of video via AirPlay to the ATV.
    Also, AirPlay does not require or have anything to do with slingbox, it is entirely iDevice to ATV.

  • IPod nano works with USB 1.1 but not USB 2.0

    Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

    I have a similar problem with the following configuration:
    - Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
    - PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
    What works well?
    - All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
    - iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
    - iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
    What doesn't works?
    My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
    - Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
    - iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
    - iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
    I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
    Help!!!!!!!!!!!!!!!!

  • How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

    I have the trial version of the latest premiere and the audio works in that but not cs6

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -especially your sound hardware, and the details of your video

  • How do i make the back and forward buttons function? they are visible but not functional.

    I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • Why is it I can drag audio in landscape orientation but not in portrait orientation?

    Why is it I can drag audio in landscape orientation but not in portrait orientation?

    Because landscape is the default layout mode.
    Portrait, which is book--optional, is for editing already added content, basically.
    Get your audio in and then test to learn how elements operate, and see Publishing With iBooks Author
    http://shop.oreilly.com/product/0636920025597.do 

  • 1 USB port charge but not recognise my iphone the othe one works fine

    Hey guys,
    I have MacBook Air 11-inch, Mid 2012
    1 USB port just charges my phone but not recgnise it. I tried a flash drive and it didn't recgnise it as well
    It was working well but all of a sudden it stopped working
    please help

    Try resetting the PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. If issues persist, your Mac's logic board battery (not a portable Mac's rechargeable battery) may need to be replaced. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down. You can take your Mac to a Mac Genius or Apple Authorized Service Provider to replace the battery on the logic board.

  • Since upgrading to v6, I have lost audio on many websites. but not all.

    YouTube and Pandora specifically. the Video plays properly, but not audit. I have uninstalled FF, along with addons and plugins, and then reinstalled. still have the same issue. Using chrome or (blech) IE, the media plays correctly.
    i downloaded latest versions of plugins and extensions as needed. for the reinstall. (did it twice BTW).
    Im suspicious of some leftover registry key issues. but not knowing which ones to edit, I aint going in there yet!
    Any ideas and help are GREATLY appreciated!

    Not sure what you mean, Ernie? All my libraries are back where they were before the install on an external Firewire disk. The only difference is it resides one folder deeper than previously.
    Aperture and the libraries are functioning as normal, but resources like the iTunes music library is unavailable for use when making a slideshow, for example. Clicking on the music button in Slideshow creator opens Aperture Audio, with no link to iTunes visible. Even the Aperture Help menu doesn't open Aperture Help. And iPhoto Browser shows nothing available.

  • Final Cut will audio insert to Digibeta but not to Beta SP BVW-75?

    Final Cut 5.1.4(Mac Quad Pro) will do audio inserts on a Digibeta deck but not a 75. We're using a Decklink HD EXtreme and have tried different "known good" BVW 75's. I thought 422 control was the same across Sony decks. What's different?

    I selected the analog audio inserts on the Digibeta and it worked. However I do believe you can have no inputs to a 75 and the 422 control will turn on video or audio inserts. All of our BVW 75 analog decks work with other systems i.e. Smoke, Flame, Xpri, Adrenaline and they also work with two other other Final Cut systems. The other two Final Cuts are on MAC G5's and have different Decklink cards that work...a Decklink SP and Decklink Extreme. It is looking like an incompatibility of the Decklink HD Extreme to fully talk to BVW-75......

  • Changing audio pre-sets (i.e. not using easy setup)

    Easy setup (DV-NTSC anamorphic) is forcing me to use a 48 hz audio preset and I did not record my video in this setting. How do I change it to 12 hz (I always re-do the audio later, but while capturing, warning window is annoying.)

    I did not have all the options clicked. When I did this, the right option popped up.

  • Z77A-GD65: Disks shown but not selectable on creating a RAID volume

    Mainboard: Z77A-GD65
    CPU: Intel Core i7 3770K
    RAM: 2x Corsair DDR3-1600 XMS3 4GB
    HDDs: 2x Seagate Barracuda SATA3 7200.12 6GB/s
    Upgraded System with new MB etc. yesterday and removed the old HDD.
    After enabling RAID in BIOS, I went to the RAID settings with Ctrl+I. The RAID setup displays both HDDs with correct description and storage size, but when I was trying to create a new RAID volume the "disc selection" option is not selectable unless "Recovery" is chosen as RAID level. On RAID level "Recovery" both disks are selectable but no RAID volume is created during the process. When RAID level 0 or 1 is chosen still the correct size of the potential volume is calculated by the RAID setup.
    Additionally, I tried the same procedure with both "RAID hot-plug" enabled and disabled in BIOS.
    The HDDs are plugged into SATA-ports 1+2. No OS installed yet.

    After several unsuccessful attempts of formatting and partitioning the disks, I installed the OS. Subsequent use of the thereafter installed Intel Rapid Storage Technology (IRST) enabled me to created the RAID volume under Windows, which is now additionally shown on the IRST page after the POST screen.
    So the RAID volume creation worked, but it still takes me wonder why I haven't been able to do this after the POST screen in the first place  .
    Well, problem still kind of solved.

  • 20" Cinema display with USB and firewire ports not working

    I have a new 20" display and was wondering why my USB and fire wire ports at the back are not working. I have an external drive that is powered hooked up to the fire wire port and a no powered piano keyboard to a usb port.
    Any help please

    Verify that the display’s USB and FireWire cables are firmly plugged in to the
    computer. Do they show in your profiler?
    Try different ports in the computer.
    Verify that your computer ports are working with other known problem free device.

Maybe you are looking for

  • What's new in Premiere Elements 13?

    Premiere Elements 13 is more of a refinement than  a major overhaul of Adobe's consumer video editing program. Though there are a couple of cool new features worth noting: • New Guided Edits. Version 13 adds more tasks to its library of Guided Edits

  • Goods Issue Documentation for Text (Non-stock) Items

    Hi all, I have a business requirement to provide some form of shipping documentation for text (non-stock) items. The business do not want to create material masters (NLAGs) for these items as they are different/one off purchases. The purchase the goo

  • What table are Exception Messages in MRP stored?

    The requirement is to develop an error report from an MRP run to capture the exception messages along with the selection groups. Ex:Selection Gr 2; Exception Message 15: Reschedules In. I am unable to track where exactly the exception messages are st

  • Is Quality management module required to be used for vendor evaluation?

    Hi, There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are

  • My Imac freezes after...

    After being in sleep mode, my Imac freezes whenever I try to play internet-based video. It is the newest model and I've had it for about 6 weeks. It is realy frustrating!