Display both PO and Street in address node

Hi Gurus,
I want to display an adderss with both Street and PObox.
For that I am using an address node.If I give "POBOX has priority", only POBOX is displayed.If I give "STREET has priority", only street is displayed in the options available for address node.
How to get both of them displayed in the address. Using an address node is Mandatory.
Is it possible to dispaly both po and street ?
Awaiting your valuable answers,This is an urgent requirement
Thanks,
Raj.

Hi Raj,
Will you be more specific and clear about your question. Please explain where you are giving this priority and in which form like textfield and how you want to show the address. and also explain the node(cardinality, attributes) you are using as address node.
Regards,
Vaibhav Tiwari.

Similar Messages

Should display both Spanish and English lang. at a time in BEx analyzer

Hi All,
I need to display both Spanish and English lang. in Bex analyzer.
InfoObject is language dependent.
Ex: For material it should display description in Spanish and English at a time.
Am only able to display one at a time.
Please suggest.
Regards,
Sandeep.

Hi Sandeep,
As Kodandapani mentioned it’s not possible to display both languages same
time as its mapping to same T table where LANGU is part of key.
I recommend you to create an attribute or maintain another table for other
language to display at a time.
if anybody get any better ideas then pl share.
Regards,
Naveen Kencha

When will Smartview support display both aliases and members?

In the Essbase classic add-in, users had the ability to display both aliases and member names. When using Smartview with Essbase, this isn't supported. Are there plans to add this back? Thanks.

I heard this is the most requested parity feature of the addin, that Oracle may be doing this sometime in 2010 since it is a complicated fix.

Display both company AND name in contacts, incoming calls, messages, etc

Is there no way to have both a person's full name, AND company appear on the display of contacts and incoming calls??
I have over 2,000 contacts in my address book, many from the same company, and many with the same (or similar) names.
When someone with a very common name calls or texts, it's impossible for me to remember who they are without listing their company as well. If I have both Sam Michaels and Samantha Mitchells in my address book, sometimes the only way to distinguish between the two is knowing that Sam works for Viacom and Samantha works for Universal.
I've heard that the only way to do this is to include the company name in the person's main "name" field. This is problematic because A) it would take me a million years to go through and personally edit all of my 2k+ contacts, and B) this is completely counter-intuitive of having the company/office/job title lines available as fields in the address book in the first place.
Does anyone know a way around this at all?? Apple really needs to find a way to fix this, as it's super inconvenient for business professionals. This is just another one of my many frustrations with Apple products being not intuitive for workers in the corporate world.

I'm not aware of a way to do this, however I'm certain that when my phone rings, it shows the person's name and company information that I have written in contacts. I've not taken time to check lately, but that seems to be the case for contacts that have a company name in them. Ones that do not have a company name show the person's name and then the label for the phone number they are using, such as home, work, mobile, etc.
Otherwise, feedback to Apple goes HERE, and then just click on the appropriate subject.

Displaying both Hindi and Arabic numerals in Oracle 10g PDF report

Hi….
Oracle experts told us to ask “In how many ways we can do it in oracle?” instead of asking “Can we do it in Oracle?” , I need ONE way to solve the following problem, it toke to much time and I don’t know if it can be solved !
The problem:
Can we print in - Oracle 10g reports - a PDF report with BOTH Hindi and Arabic numerals?
Well, at design time everything is fine, you can use right-to-left, left-to-right and the print preview is showing BOTH Hindi/Arabic numerals fine, but when I tried to produce it as a PDF, unfortunately its not, means its either all Hindi or all Arabic numerals !
I tried everything possible, environment variables: NLS_LANG, REPORTS_BIDI_ALGORITHM, and REPORTS_ARABIC_NUMERLS, setting Digit substitution to Context in windows regional settings, uifont.ali is modified properly according to metalink note, but nothing solved this issue!
I noticed something, when I used the DESTYPE=printer and DESNAME=PDF995 (one of the PDF printers) , it worked fine , means the problem could be in the generic PDF generator of the Oracle reports server,
But even with PDF995 you still need to feed the file name, which is not suitable for multi-user environment that need the report to be displayed via web browser.
Does anybody face this before?
Edited by: khaled.w on May 24, 2010 7:29 AM
Edited by: khaled.w on May 24, 2010 7:35 AM

Don't tell so much.
Check the following link
1. PDF Reports in Unicode / Arabic &amp; English | Oracle Community
2. OraFAQ Forum: Reports & Discoverer » Report in Arabic(pdf) (merged)
3. Arabic Report generated to text file giving Jun... | Oracle Community
Hope this helps
Hamid

Bex Web Ad-hoc Analysis Template - Displaying both Data and Graph Tabs

Hello Everyone
I am asking this as I would not have belived this if I hadn't seen it for myself. I was showing somone a BW report using the standard Bex Ad-hoc analysis on the Web. They managed to display both the data analysis tab and the Graphical display tab on the same page, with the data at the top and the graph underneath. I could see that both of the tabs were highlighted at the top. It was great because as you manipulated the data in the navigation block, the graph changed at the same time.
I have looked in all my documentation and I have not found anything.
I have tried to replicate what this user did, but cannot. I have tried all the usual things like Shift control and alt, but it doesn't work.
Does anyone know how to do this, because the user loves it and I cannot explain to them how they must have done it!
Points will be awarded for the successful answer!!
Many thanks to you all
Gareth

Thanks Andrew
I am glad you understand what I mean, as I thought I was seeing things when I saw it!
I feel I am so close to the answer, but when I do the drop down on the Graphical display tab for "display as" it only gives me the options
Column Chart
Line Chart
Pie Chart
Bar Chart
Stacked Bar Chart
Do I need to do something else, or I am I in the wrong part of the report and I am running BW 3.5.
Thanks for your reply so far
Gareth

BEx Query Formating - Displaying both Sum and Average in the same report

Hi everybody,
I need to create a BW report in the below format,
                      Company Code                                            Total       Total Average
                               0001            0002      0003      0004
Doc Type
    AV                        10               10         10         10            40                 10
    RV                        20               20         20         20            80                 20
Getting the report till the 'Total' column is easy but having the 'Total Average' as a separate column is where I am stuck.
Having the company code in the rows, and not clolumns, would have solved the issue but I need to keep the above format. Also I do not want to
see the Total Average for every Company Code, just that of the 'Total'.
In the Query Designer, in the Column section I have first the 'Company Code' and then the 'Count' in a structure, so whatever I add to this structure,
is displayed for each Company Code, that means 2 columns for each Company code. This changes the format.
I cannot use the Cell Definition method here, as then it would be a static structure and the number of Company Codes are not fixed.
It would be great if somebody could provide some suggestions.
Thank you,
Ajay

Hi Suman,
Thanks for the quick reply.
I have tried this, but again this will change the format. With the way you said, I will only get the report in the below 2 formats,
1. Company code in Free Charac, later drill down to Rows,
Doc Type Company Code
    AV                 0001                10
    AV                 0002                10
    AV                 0003                10
    AV                 0004                10
    Total                                      40
    RV                 0001                20
    RV                 0002                20
    RV                 0003                20
    RV                 0004                20
    Total                                      80
or 2. Company code in Free Charac, later drill down to Column,
                  Company Code
                           0001                     0002                     0003                     0004
                    Total    Total Avg   Total   Total Avg   Total   Total Avg Total   Total Avg
Doc Type
    AV             10           10             10         10           10         10           10           10
    RV             20           20             20         20           20         20           20           20
Both the above are different from the format that I need.

Displaying both pixel and inch dimesnsion in the Info Panel

Anybody else constantly switching the Info Panel from displaying inches to pixels and vice versa?
How to avoid having to do this? I either want to see one or the other, somtimes being able to see both simultaneously would be nice. While dragging out Rectangular Marquees, doing Transforms, etc.

I actually installed the trial of Flash Builder but did not get far before it expired, so I can only share Silkrooster’s suspicion that it may be possible.
Maybe you should ask over at
http://forums.adobe.com/community/flash_builder

ALV: Quantity field displays both blank and 0 value.

Hi,
My ALV has a quantity field. The requirement is for the first time displaying the value of this column always blank but once user change it to 0, it should keep 0 value.
I implemented the first requirement by setting the property Display Leading Zeros in Formatting area to "Zeros as Blanks" for the corresponding attribute/node in context. The problem is whenever I key in 0 then enter --> the value of this field is always set back to null.
I have another solution is using type char instead of type quantity. But this is the last choice because I don't want to validate and make the char field works as the numeric field.
Please help.
Thanks,
Khanh
Edited by: khaliachika on Jul 16, 2010 12:36 AM

Hi Anu,
One question from my side.
U have displayed the ALV.In that grid u have quantity field.U have changed the value of that field to 45.
When u press enter the value has been changed to .045.Is this u r problem.
U can do onething anu.
Declare one varaible with the local field.
Pass u r quantity field value into that variable.
While displaying thriugh SET_TABLE_FIRST_DISPLAY in your internal table pass this variable.
It will solve u r problem.I think.
Let me if yu have any problem
IF u want u can refer to the program BCALV_EDIT* in se38.
There also u have needful info
Thanks,

How to set up both static and DHCP assigned addresses on an AirPort Extreme

I recently bought an AirPort Extreme to replace my failed Cisco/Linksys router.
I am having trouble figuring out how I can configure the Extreme to support the already static IP addresses on my network as well as assign IP addresses via DHCP to a few devices where static IPs are not supported, i.e., work laptop.
Additionally, when DHCP is turned on, are my only options the 10.0, 172.16, and 192.168? What if I am running something like 10.10 or 172.30?
I am far from green when setting up computer networks, but this AirPort Extreme is making me pull my hair out.
BTW, I have access to a number of computers running a number of OSes including Windows XP, 7, and 8, as well as Mac OS X Snow Leopard and Mountain Lion.
The Mountain Lion or Windows 7 machine would be the preferred ones to configure the Extreme. I already have the AirPort Utility software running on them.
Any help would be appreciated.

I have found the 'DHCP Reservations' option on the AirPort Extreme to be buggy. I seem to remember it causing IP conflicts for some reason. I think what I remember is that if the computer with the reservation was off, and the DHCP server then handed out that IP to another DHCP client, then there would be a conflict when the reserved IP computer was turned back on. Maybe it was an issue in ealier versions of the AE or OS X as the case may be, and maybe it's been corrected, but I've never bothered using it agian since the method I describe below has always worked without fail. Also, I'm guessing DHCP Reservations would work fine if one manually enters IPs outside of the DHCP range but in the AE 'DHCP Reservation Setup Assistant' the IP options provided are within the DHCP range which to me makes no sense and increases the potential for IP conflicts.
Here's what I do to setup a mixed environment of static and dynamic IPs on my network. It works like a charm and does not require the DHCP server (beyond the distribution of dynamic IPs to hosts using DHCP).
For machines on my network that are accepting services from the public network, I set them up with static IPs using the 'Manually' option (System Preferences/Network/Ethernet/Configure IPv4). The settings for 'Router' IP address and 'DNS Server' IP address should both be set with your gateway/router LAN IP). Use an IP address below or above the DHCP range of adresses (in AE/Internet/DHCP/DHCP Beginning & Ending Address).
i.e. if my subnet is 10.0.1.1 and my DHCP range is 10.0.1.100 to 10.0.1.150, you could set the static IPs on your local hosts as 10.0.1.x where x = any number from 2 - 99 or from 151 - 200 as an example.
All other machines and devices that do not require static routing are setup as DHCP clients and get a dynamic IP from the AE. To me it's a simpler setup though it might take a little extra time to setup initially.
John

Is it possible to have one thermometer display both Fahrenheit and Celsius?

Two scales: Fahrenheit on one; Celcius on the other.

Two *true* scales on one fill-type indicator is probably a LV8 feature :-)
Well, one thing I HAVE done is to take a thermometer indicator, popup and enable its 'units' display and call it 'degC', popup and enable the thermometer's digital display, then change the digital display's units to 'degF'. Of course, on the diagram, you have to convert a plain floating-point wire to a unit-ed wire to feed the indicator terminal, but you can clearly choose font/size/color/etc. separately for the scale and the digital indicator. Would this help?
P.S. When working with temperature physical units, make sure you understand the conceptual difference between, for example, 'degC' and 'Cdeg' in LabVIEW's unit scheme. The two forms exist because conversions need to kno
w if you're converting delta degrees (the 'Xdeg' form), or absolute temperatures (the 'degX' form). Kelvin of course, is a don't-care.
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer

Error message display both key and value

Hi,
I've an alt key check & if the validation fails then the error message pops-up and displays :
Error
JBO-SUB_TYPE_CODE_ALREADY_EXIST: The sub type code already exists.
I'm not sure why is it displaying the key (JBO-SUB_TYPE_CODE_ALREADY_EXIST:) part also in the message.
Can someone tell me how to suppress the key part in the error message and just display the message (The sub type code already exists.).
Thanks,
-Gaurav

Hi,
If you want to avoid the roundtrip to the database you can also create a uniqueKey validator in the Entity Object
were the AltKey exists. In the failure handling of the validator set the message that you want to be displayed.
You can see an example of this here: http://www.gabrielsideras.com/2010/09/28/adf-unique-key-validation/
Gabriel

Can I display both time and date on iPhone 4s home screen?

The time and date is diplayed when I 'slide to open' but can I have the day / date and time displayed when the screen shows all the apps? Currently it just shows the time at the very top and considering I'm this is my first iPhone, I've become used to having the date and time constnatly displayed. Any help would be greatly appreciated.

A pity it can't be displayed elsewhere.
Thanks for your prompt help.

How to display both total and subtotal with condition on

Hi Experts,
We had a special requirements from our "Powerful" user for a top sales ranking report:
say user runs for top 10 customers, query/view (It has to be built as query/views because they are going be exported to Portal) need to show
1. sub total 10 customers
2. total for all customers
3. for each customer to show their sales percentage out of the overall total sales
any recommendation welcomes
Regards,
Feng

Create a condition on the Sales Key Figure as Top N and value as 10.
So when you run the report for the Customer in Rows and Sales Key Figure in Coulmns you will get the report output for 10 customers and their respective Sales Figure. But if you see the overall result, it will be for all customers and not for only 10 customers. To get the total of only 10 customers, right click on Sales Key Figure and select Calculate result as Summation.
Now below Sales Key Figure, create a Formula Key Figure (FKF) that will give the Total Sales for All customers. Use the formula as below
FKF = SUMGT (SALES)
Now create another Formula Key Figure (FKF1) that will give the % Sales with respect to total Sales. use teh Formula as below
FKF1 = Sales %A FKF

Mail Won't Display Both POP and IMAP Accounts in Inbox

When I set up Leopard Mail I had my two accounts gmail and Comcast set up as POP3 as gmail hadn't enabled imap on my account yet. With imap now enabled I went and switched my gmail account over to imap from pop. The gmail account seems to work fine, but my pop account essentially disappears. Pop3 emails (comcast account) don't appear in the Inbox. However, I can search for them and then they can be found. When I removed the imap account, the pop3 emails appeared back in the inbox exactly how they should be. When I remade the imap account they disappeared again.
I can't see what I am doing wrong, so this looks like a bug. Opinions?
Andy

Okay, it just fixed itself without me doing anything, or even quitting the program again. It still seems like a bug.
Andy

Display both PO and Street in address node

Similar Messages

Maybe you are looking for