Display button directs to spool list

Hi All.
I have a pecuilar problem in t-code ME9A where i am executuing the message output screen without any entries and I am directed to a ALV display of all available message output.Now when i select one output type of a purchasing order and say display message instead of displaying the message the document is stored in the spool list at SP01.
Why is this happening any one please advise.
Also this is only happening to ABSA output type and NEU output type is working fine(i mean it displays without storing in the spool).
Regards
Praneeth

Vijay!
I didn't see any such provision in NACE.
Also when I excute NEU output type first and then execute output type ABSA. I am not getting the spool request it is displaying as required.
Please advise.
egards
Praneeth

Similar Messages

Spool List output display 255 char when the rpt is run in Background

Hi Friends,
I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
My Problem:
1. The spool list is truncated after 255 characters when i run in background.
2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
3. I ve not used any Standard - line size for dislaying ..
4. In foreground i am able to display all the 64 columns... Y not in Background......
5. My Printer setting is ..X_255 .... only ...
Requirement:
1. What should i do to increase the spool list display to more than 255 characters
2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
Expecting your answers,
Thanks in Advance...
Cheers,
R.Kripa .........
Enjoy ABAPing ..........
new upcoming Abaper ....

Hello Kripa,
You need to perform two actions.
1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
When you give your report in background, do not forget to choose the new format you created.
2. After the spool request is created, you take its number and use it ar a parameter in the following report.
Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
It should work then.
roxani
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with line size more than 255 characters in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlange berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.
CHECK REST_LEN > 0.
ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.
IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.
IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.
IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.
ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.
FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS .
DATA: CHUNK TYPE I.
WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.
FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM.

Computer shuts down when I click on the list or grid display button

I've uninstalled an reinstalled 3 times and instead of the computer shutting down when I start itunes as it was doing, it only does it when I click on the display as a list, grid or cover display button. However it seems to unistall some parts at the same time as I can't open it all afterwards (error message says its not installed). This started to occur after a couple of weeks of non use and when I last used it I purchased songs from itunes. I now have current version but didn't when it first statred to happen. Help!!

Okay ... we'd better have a closer look at the minidumps the PC has been producing to see if they can turn up any additional information on what we're dealling with here.
Open "My Computer", and see if you can find a directory called C:\Windows\Minidump. (That's where minidumps usually go on a PC, so long as the Systemroot hasn't been set to some other folder.)
If it's been collecting minidumps, there should be files in there with names like "Mini(number-numbers).dmp"
(If you have "Hide filename extensions for known file types" enabled in Windows, the ".dmp" extension may not appear on the dump files. The numbers in the file name will be different for each minidump, if minidumps are present.)
Once we've tracked down some minidumps, we can have a go at analysing them.
1. Download and install the Windows debugging tools from here:
http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
2. Go to Start, All Programs, Debugging Tools For Windows, Windbg
Once you open Windbg, you will presented with a blank screen.
3. Click on "File > Symbol File Path". Here you will enter the symbols
path. Symbols are needed to effectively debug.
The path will be:
SRVc:symbolshttp://msdl.microsoft.com/download/symbols
4. Enter in this path and click OK. Now, go to "File > Save Workspace"
so that your symbols path is saved for future use.
5. Go to "File > Open Crash Dump" and load the file.
(An "Open Crash Dump" screen will appear ... doubleclick "My Computer", doubleclick "Local Disk", doubleclick "Windows", doubleclick "Minidump", and doubleclick on one of the minidumps in there.)
You will/should get a message to save base workspace information. Choose no.
Now you will get a debugging screen. It takes a little bit to run it,
as the symbols have to be downloaded as they are needed.
After the "bugcheck analysis" part of the screen comes up, look for the component that seems to be causing the crash. (It'll say "Probably caused by" ...)
Let us know the precise name of the component. (Include any file name extensions like .dll or .sys.)
If you can, have a look at several of your crash dumps. Are all the crashes being caused by the same component? If not, could you let us know the names of the various components being cited in the various crash dumps?

Reg. Display of Output exceeds 255 characters as spool list

Dear Experts,
My requirement is that i need to display output that exceeds 255 characters in length as spool list. How should i achieve it?
Regards,
Ramesh Manoharan

Hello,
Following SAP Notes can also help you :
[https://service.sap.com/sap/support/notes/1226758|https://service.sap.com/sap/support/notes/1226758]
[https://service.sap.com/sap/support/notes/1174095|https://service.sap.com/sap/support/notes/1174095]
Wim

User exit / badi in spool list display

Hi, I have a little "problem" with spool lists: I'm looking at a spool list, generated by a Z-report in a Job. This is in maintenance planning: The job executes a first step to generate with ristra20 maintenance orders. In a second step my Z-report updates the orders generated in the first step. The next morning my maintenance planners can look into the spool generated by the job... but there is no easy, modification-free way to allow my maintenance planners to just double-click on of the order numbers and to sump into the order. For that I would need a user exit / badi in the spool list display. Now, I got some questions: Is there somebody else who would be supporting a user exit / badi in spool list display? How are development requests to be send to SAP nowadays with maximum probability to get implemented? Thanks for your time, Holger

Hi Holger,
If you go to class CL_EXITHANDLER, Method GET_INSTANCE, then put a breakpoint after 'call method cl_exithandler=>get_class_name_by_interface' i.e. at line 28 'case sy-subrc'; then run your transaction again and you will get many of the user exits and badis available. It will not show you the enhancement points, but all badis etc. will be there.
Hope this helps.
Glen

I am wanting to import photos from my imac to my ipad. the help page directed me to open the photo button under the device listing on itunes. There is not a photo button and I am connected to the computer. It does show buttons for books, movies, etc.

I want to import photos from iphoto to my ipad. The help button said to press the photo button under the device list. There isn't a photo button shown. Could it be hidden?

If you connect and select your iPad on the left-hand side of your computer's iTunes, on the right-hand side of iTunes (not on the left) there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders or albums/events to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.

Error - You may display spool list from your own jobs..

Hi Team,
I have created a SAP_ALL Display role for our maintainence members and whenever they are trying to view the spool log in sm37 they are getting the Error - You may display spool list from your own jobs..
I have checked the following objects :S_SPO_ACT and S_SPO_DEV all those have full authorizations and regenerated and done a user compare and then checked ..getting the same error..
Could you pls provide your vauable suggestions..
Regds,
Satyanarayana N.

Hello Satya,
Normal users hardly need access to s_btch_adm with value *. I wonder if your security auditors would agree to it.
Also 3 is not a valid value for s_btch_adm. Either it can be Yor N. Y mean that the user is batch administrator while N means the user is not. Of course * encompasses all. Try first with N and see if the users are able to see the spool.
If not then do you have mutiple clients in your system? If so make sure users are trying to see the spool in the correct client i.e they are trying to check a spool generated in client X after logging into client X only.
Regards.
Ruchit.

Spool List output display 255 chars

Hi,
I am execuing the my report in back groung.The oupt list has more than 255 chars.
could u please let me know how Spool List output display > 255 char when the rpt is run in back ground.
regards,
Rayeez.

Hello,
Try using the printer formatting as X_65_255.
Please check this [link|Report is truncating in background; for details.
BR,
Suhas

Display message in spool list

hii all
theres this program on which iam working. It fetches the data from the database and does further processing. the program is executed in the background. if there is no data selected, the spool list shows the message "list contains no data". What I need to output on thelist is this message " The records in DATABASE table does not exist for further processing". How is it possible to show this?
shakir

Hi,
In your alv report Top_of_page you have to write the following info.
form top_of_page.
use write statements.....
if it_final[] is initial.
write 'The Records in DATABASE table does not exist for Further processing'.
endif.
endform.
Regards
vijay D T T.

Want to know table which stores SPOOL LIST RECIPIENT & email addres

Hi Guys,
I need to create a report for all jobname & recipient email address. Kindly let me how to find out the recipent's email address for all jobname in TBTCP. I understand that recipent is the distribution list, distribution list has email address.
JOBNAME ---> SPOOL LIST RECIPEINT -
> EMAIL ADDRESS.
thanks.

Guys thanks for you help and time.
I am not getting the expected result after doing above steps.
I will try to clarify the requirement further.
When I run t-code SM37 and enter following :
Job name : TXDET-DAILY
User name : *
Job Status : Checked Sched. Only.
On next screen JOB OVERVIEW. Only one record shows up for job TXDET-DAILY. When I double click this record, system takes me to next screen where there is button for SPOOL LIST RECIPIENT. When I click this button it displays the recipient is TXDET. TXDET is actually a Distribution list name, maintained in SAP office (SO01).
When I go in t-code SO01 and click DISTRIBUTION LIST button and then enter shared distribution list name TXDET.
It gives me 2 email addresses under this TXDET distribution list.
[email protected]
[email protected]
The spool from the job TXDET-DAILY will be emailed to these 2 email addresses.
Now I need a report which gives following information.
Job Name................. Distribution List Name...............Email Address
TXDET-DAILY............TXDET......................................[email protected]
TXDET-DAILY............TXDET...................................... [email protected]

How to send a report directly to spool..?

Hi guyz !
 How do i send a normal report directly to spools at execution.
 Please advise .
Thanks in adv.
jahan

hi,
The easiest way of printing a list while creating it, is for the user to choose Execute + print on the report's selection screen. The user can choose between displaying the list on the screen (choosing Execute) or printing it directly without displaying it (choosing Execute + print).
use this function module SET_PRINT_PARAMETERS' to send a report directly to spool.
sample program.
REPORT SAPMZTST NO STANDARD PAGE HEADING LINE-COUNT 0(2).
PARAMETERS P TYPE I.
INITIALIZATION.
CALL FUNCTION 'SET_PRINT_PARAMETERS'
 EXPORTING
 ARCHIVE_MODE = '3'
 COPIES = '5'
 DEPARTMENT = 'BASIS'
 DESTINATION = 'LT50'
 EXPIRATION = ' '
 IMMEDIATELY = 'X'
 LAYOUT = 'X_65_132'
 LINE_COUNT = 54
 LINE_SIZE = 20
 LIST_NAME = 'Test'
 LIST_TEXT = 'Test for User''s Guide'
 NEW_LIST_ID = 'X'
 RECEIVER = 'KELLERH'
 RELEASE = ' '
 SAP_COVER_PAGE = 'X'.
START-OF-SELECTION.
DO P TIMES.
 WRITE / SY-INDEX.
ENDDO.
TOP-OF-PAGE.
WRITE: 'Page', SY-PAGNO.
ULINE.
END-OF-PAGE.
ULINE.
WRITE: 'End of', SY-PAGNO.
or
Printing Lists
You can send a list from a called program directly to the spool system instead of displaying it on the screen. To do this, use the TO SAP-SPOOL addition in the SUBMIT statement:
SUBMIT... TO SAP-SPOOL print-parameters.
follow this link for more information.
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dba54635c111d1829f0000e829fbfe/content.htm
regards,
Ashokreddy.

Max. width Spool list to mail receipent

Hi,
I want to schedule an ALV Report in Background, the output spool will be send to mail receipent. Here my problem is the width of the ALV Report is high. So, in the mail it was missing some columns.
I have checked in Spool request, there also found some columns are missing. For that I have used 'Display in Maximum width' button on the Spool Request screen. Now it is displaying all columns in Spool.
How to control it in Mail? How to send Maximum width spool list to mail?
Thanks for reading.
Shiva Kankanala

It should be define in the definition of backgroud job.
Goto steps of background job and hit 'Print Specification' button, press 'Properties' button and select the require format and save.
You spool will then be create using this format.

Spool list recipient in SM36

Hi All,
I am using the FM's JOB_OPEN, JOB_SUBMIT and JOB_CLOSE in a report program to create batch jobs.
Now some of the batch jobs have DL's to which spools of the batch jobs are sent and are maintained in 'SPOOL LIST RECIPIENT' button of SM36.
In the report which uses the above FM's to create batch job, is it possible to include this functionality.
That is when a batch job is created from my report program, the spool list recipient should have the DL provided in my report program.

Hi Arun,
Refer This Link
http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Thanks.

Spool list not available from SM37

Hi All,
We have scheduled a job and running successfully.
But spool list not displayed from SM37, whereas spool request generated in SP01 at the same time when the job is completed.
We've checked with the developer and they dint find anything wrong from program end.
Kindly suggest what is going wrong here.
Thanks in advance......

Hi,
Apply the following SAP notes to resolve this problem:
1372936 - Spool lists no longer displayed from SM37 after SP
1174127 - Job refers to incorrect spool request
regards,
Aidan

Spool List from MRP RUN

hi,
After i run MRP for a Plant , in the spool list i get a list of materials for which MRP has run.
There is another coulmn with heading Selection group, under which nos 1 to 8 are listed.
against each material some nos are displayed.
I am attaching the screenshot of the spool list.
Please refer to Link: [http://picasaweb.google.com/lyrojgeorge/Public#5315125239632521186]
Can someone explain what these nos relate to.
thanks in advance
regards
lyroj

Hi,
The details are the exception messages against the Materials.
Check in MD05 & MD06.
Best Regards,
Siva

Display button directs to spool list

Similar Messages

Maybe you are looking for