Display Calibration Creates Color Profile Problems.

I haven't received any response out of the MBP Display forum and I thought you guys might have better insight anyway because you are dealing with color calibration more often. Here it is:
I used colorsync utility to calibrate my monitor, hoping it would at least get the colors more accurate than they are with the "Color LCD" profile. The Color LCD profile has a bad yellow tinge to it. I went through the process 4 times so I would be able to choose the best profile out of the 4. (Now I can't delete the extra profiles but I guess that is a different topic...) The color accuracy and the gray-tone is MUCH better BUT I have a slight (understatement) saturation problem.
My problem is after using Color Sync, ALL of my REDS are oversaturated and blown out. There is a problem with the blues and greens as well but it isn't as bad. Of course, they look fine in non color managed applications (ie FireFox) but everything else makes my photos look horrible. Even the RAW files straight out of the camera look blown out.
I had, at first edited these files on a PC so they always looked fine but now that I have switched to Mac I have noticed how oversaturated they are in all of its color managed applications. (Safari, preview, and even the desktop.) I thought perhaps that I had just pumped up the contrast and saturation too high on the PC and the color profile was now creating a problem because the color was set for an un-profiled file. BUT after viewing the unaltered .NEF's straight out of my camera, they too are oversaturated.
Now, I have some wallpapers I had downloaded from the web that look the same as before. It is just MY OWN photographs that are oversaturated. Obviously I have chosen the wrong color profile or something is wrong with my workflow. The wallpaper that looks the same doesn't have a profile assigned it when I view-info. It just labels the color space as RGB. All my photos that have problems, have a color profile assigned. I am using sRGB as recommended. There are a few still using Adobe RGB (which is what my camera defaults to) and they have the same oversaturation problem.
Aperture is set to export with an sRGB profile and CS2 uses sRGB as well.
Any advice? What monitor and color management profile's are you guys using?
I can't tell what is right anymore. What should I edit my photos to look good in? The only MONITOR profile that doesn't blow them out is Adobe/Apple RGB, Color LCD, and a few of the other default installed profiles.
I've got a bad case of color vertigo!

sorry uberfoto, did not get what MBP meant at first.
what Jan says about color calibration tool is right....and start again from the RAW.....
i am photographer in the advertisement, reportage, portraits and landscape.
my problem was to get the thinks printed as I saw them on the screen.
here what I have to say on that (part of another discussion):
".... Sorry, but no AppleTFT Display comes close to a hardware calibrated display. Maybe they are semi-professional. I do not say this to insult Apple, ore somebody else, but i say this to sway out the illusion of , " if I just spend more money on the calibration tool and software, I´ll have better prints". It´s just not possible, because the display cant show what is there. A Apple CRT Studio Display is far better in this. I you want to have a flat-screen TFT Display to bring good results, you have to choose one that is able to be hardware calibrated and has a higher lookup table (EIZO, LaCie, QuatoGrafics......)
I use use one professional EIZO CG21" and one semi-prof. EIZO FlexScanL985EX(21") and the diffrence is important between the two.
But i need only one to be Print Proof ready.
Before i was always afraid when i gave the picture file to my client, because of what my pictures look like once it is printed. Now the outcome is right or differs only very little from what I saw on the screen. my calibration tool is EYE ONE. "..
BUT your main problem is how it looks in the web.
my thoughts and suggestion on this:
1. most people see the web on PC Display. those use a gamma of 2.2
(apple = 1.8) so pictures appear more blue with more contrast. this setting is made to hide the low ability of the system and display to show colors as they are and give and give crispy impression. So you will have to consider this when you prepare the pictures for the web. therefor the standard calibration of your MBP is best for your needs. ( for printing the Display has to be set on 5.600 kelvin ,that would be to warm 4 the wwweb).
2.
a) In the beginning I use Aperture 1.5 (or Lightroom) to select and prepare the pictures as I like them.
b) then I export them in 8 bit/300 dpi in the size they will be used as PSD or TIFF.
c) I will then open them in Photoshop (color-settings=web /internet) make the cleaning and so on.( 4 the web I always increase the saturation because sRGB and JPG will throw away lots of colors).
d) AND NOW "save for the web ". This is definitely the best tool to prepare pictures for the web. on the right upper part of the window there is a flash-open menu where you may choose to see the colors like in windows or macintosh system.
and on the lower right of the application-window there is a roll-down menu where you may preview the results in different browsers of your choice.
It is here where you can produce amazing high Q pictures 4 the web under 100 kb.
Hope this may help.
good luck,
larry
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"
G5 dual 2.3/4,5 gigRam/ATI 9600 128MB-PB G4 12" Mac OS X (10.4.2) EIZO CG 21"+EIZO L985ex 21"

Similar Messages

Creating color profiles Leica D-Lux 4

When creating color profiles with Colorchecker Passport from X-Rite, DNG profiles Editor shows an error mesage USE A VALID DNG FILE. However I have used the DNG conversion option in Adobe Bridge when importing Leica RWL-files from camera. Can you help me solve th
is problem?
Photoshop Extended
Operating System: Windows XP Professional

What version of Bridge/Photoshop are you running?
Is it X-Rite's Passport software or Adobe's DNG Profile Editor software that is giving the error? I ask this because you talk about using Passoprt to create profiles, but then describe the error has coming from the DNG Profile Editro which is Adobe's software.
What process are you following, starting with the RWL file, that gives the error about not having a valid DNG file?
I know X-rite released an update to their software a few months ago.
You might post one of your RWL files via YouSendIt.com to let others try and duplicate your scenario.

Color profile problem after installing CS4

OK.
First, let me post these side-by-side comparisons:
As you can see in Image 1 (the "before," left-side photo in each comparison), the colors and overall appearance are distorted. I've read things about gamma but it's all confusing to me. This is surely a color profile problem, right? The transition among pixels that involve colors of yellow and gray is rocky, grainy, and the flat out color is just wrong. Now this color problem affects pictures when opened in both Photoshop 7.0 and the standard Windows Photo Viewer. Meaning, whenever I open pictures in both PS 7.0 and Windows Photo Viewer (my default viewer), this color problem totally messes up certain photos and really damages my ability to edit. I'm an avid photo editor and it's imperative I have proper color display so that I can accurately edit. Keep in mind that certain pictures do not take on this error. When a photo is generally brighter, the distortion is basically invisible. It's photos that are dark or have dark portions in them that display the distortion.
*Note: I took these before-and-after pictures with my camera, because screencapping would not work, since you all don't have the same color profile issue on your computer. That's the only way I can show you!
HOWEVER, when I open photos in another standard Windows application, "Microsoft Office Picture Manager," the color problem is magically erradicated altogether. It shows photos as I've been seeing them all along, until I installed CS4 about two weeks ago. Before installing CS4, everything was fine and I had been using Photoshop 7 for years and have never had a problem. I'm guessing CS4 messed something up. It had to have. Just FYI, I uninstalled CS4, hoping it would reverse the problem. But still, the color issue persists in PS 7 and in my regular Windows Photo Viewer.
Since images display their true form in Windows Office Picture Manager, I don't think I need to calibrate my screen. Or do I? I've read things about it, and to some people, it's not necessary. Right? Okay. I really hope someone can give some advice! Thank you!
P.S. Here's the original photo. On my screen, it looks distorted when opened in photoshop or opened w/the viewer. However, here on Firefox, it's fine.

You should try to familiarize yourself with the concepts of color management.
It's kind of too in-depth a subject to walk you through from a cold start here... There are a lot of good resources out there to help you get started. For example, in just a few seconds Google turned up this:
http://www.adobepress.com/articles/article.asp?p=1315593
The one thing to remember is this: There is NO quick solution, easy set of defaults, or direct answer to making your setup do what you want without your having to understand color management.
People may tell you to calibrate your monitors, or use a particular color profile as a default, or whatever, and they may have good, solid reasons for telling you those things, but if you don't attempt to get your mind around color management it will always seem as though something isn't working right, or is simply magic, which will be frustrating to you.
Here are some basic questions to ponder:
What image color profile is your image carrying?
Is your monitor a wide-gamut display and do you have a color profile set up for it? What kind of monitor is it?
What version of Windows are you running?
Do you know the difference between a color-managed app and one that is not color-managed?
Which of the apps you're using/showing above are color-managed?
What are your settings in Edit - Color Settings?
Take some time and do some research, get your head around the concepts, and it will all make more sense I promise you.
-Noel

How to solve the Embed Color Profile problem...

Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajiv

I used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else {

Weird color profile problem after SMC update

Although I've managed to resolve this particular problem, I wonder if anyone has suffered the same thing.
Software update says that I should do the firmware update, so I did that yesterday night. Also, at the same time, I went and removed MS Office 2004 Test Drive (it was taking up space for no good reason). Sometime after doing those things, it seems like OSX had lost the display color profile. The only ones I've got was the Adobe one, Generic RGB and sRGB. The generic RGB washes the screen with a blue tone, and clicking on Calibration would merely have the ColorSync utility complain about the profile isn't there.
Looking at the knowledge base, it says that after the 10.4.8 upgrade, the screen may look bluer than before. The curious thing was that my Macbook reported it running on 10.4.8 when I first got it. But anyways I downloaded 10.4.7's LCD profile, and put it at the location specified in that knowledge base. Display preference still didn't pick up on the profile, so I end up restarting the machine, and now it seems to be using a profile called "Color LCD".
I'm wondering if anyone else have experienced something like this, and going to document this here as a possible solution if someone is lost after a random deletion of a color profile....
Macbook 13" Mac OS X (10.4.8)

I had something similar happen when I upgraded to 10.4.8. In fixing the blue tint problem, I loaded a backup copy of the Color LCD profile. Subsequently, under exact circumstances I don't remember, the machine "lost" the profile. And the calibration option would just give an error.
So somehow, after further fiddling, I ended up with two copies of Color LCD profile, one the old 10.4.7 one, one the 10.4.8 one. I haven't had the problem of it losing the profile again.
But I might mention that there is a related problem which you may encounter. If I use fast user switching with another account and return to my (admin) account, the blue tint returns. The workaround is as described in this article:
http://www.macworld.com/weblogs/macosxhints/2006/02/fuscolor/index.php
I have created an alias to the DMProxy application as described in the above article, and have to run it after every time I use fast user switching.

Login Window Color Profile Problem

I just upgraded my Mac Pro from 10.4.11 to 10.5.8 and finally to 10.6. I downloaded the 10.6.4 Combo update and all was fine. When I ran the next round of updates, which included the “Snow Leopard Graphics Update,” my calibrated display color profile was switched to the standard “VGA Display” color profile. That in itself wasn’t a big deal as I readily switched it back (on all 3 user accounts) but, the Login window now uses the standard “VGA Display” color profile and it looks terrible. I have a NEC MultiSync P1150 19” VGA CRT. The video card is the nVidia 7300GT that came with the Mac. This monitor was one I originally spec’d for a friend of mine back in the late 1990’s (MFG date is 1997) and the color is so good yet that I see no reason to replace it. The monitor is not the issue here.
My question; Is there a .conf file for the login window that I can edit so it selects my calibrated color profile instead? I’ve read the articles http://support.apple.com/kb/DL1083 and http://support.apple.com/kb/HT4286 and it doesn’t appear that I even need this update.
I imaged my hard drive after each OS upgrade so I have a day old image to revert to 10.5.8 if needed and then run the updates again (this time skipping the graphic update) but, I would rather not have to spend the several hours to revert and upgrade again.
I have some experience with command line editing in Unix/Linux. I just need to know the correct file(s) to edit. Also, do I have to enable the Root user to do this? I seem to remember reading somewhere that the Root user by default is not enabled in Mac OSX.
TIA…..Paul

So, I went ahead and restored from my 10.5.8 image. I upgraded to 10.6 and the login screen matches my user color profile. After the upgrade to 10.6, OSX changed the default color profile to “VGA Display” instead of the “VGA Display Calibrated” profile I had created back in 10.4.11. This uncalibrated color profile looked fine at this point so I left it at that setting. It actually looked a little better that my older calibrated profile. So, no real problem here.
BTW the older calibrated profile was created using OSX calibration tools in 10.4.x. I’m going to calibrate again in 10.6.4 and see what it looks like. This monitor has excellent color. Game play is super and film photography editing on it has always reproduced very nice matching images.
I then updated from 10.6 to 10.6.4 with no additional updates applied. The problem with the “Color Profile Challenged Login Screen” happened after the 10.6.4 Combo Update. The “VGA Display” profile had somehow been altered. I switched to Apple RGB and that matched the pre-10.6.4 VGA Display profile.
Apparently I wasn’t paying close enough attention during the first install. I can deduce at this point that the graphics update wasn’t the problem as I had previously reported. I did set each user color profile to Apple RGB but the login window stays at altered VGA Display. I don’t feel like experimenting with previous combo updates to identify which one is the culprit. I had a few nights to work this out and now I want to get back to using my Mac for other things. I’m going to go ahead and run the rest of the other updates including the graphics update.
I hope I can get an answer here to see if there is a conf file I can edit to set the login window to use a color profile of my choice. It’s a minor but glaring annoyance that a slightly Monk’ish person like me would like to remedy.
Otherwise, the system runs fine (even with only 1GB RAM) and my CS1 suite appears to have full functionality.
TAIA…..Paul

Over-saturation and color profile problems

Adobe Bridge CC color settings are set to North American General Purpose 2.
Adobe Photoshop CC is synced with Bridge for color management. PS working space is sRGB
The thumbnails and previews in Bridge match what opens in ACR and Photoshop. When I view the thumbnails in Win7 file explorer they are oversaturated. When I veiw them in web browsers they are oversatured and in some instances there is an intitial moment where they look one way, then the image transitions quickly to a more saturated version.
In Photoshop under View > Proof Setup it is set to sRGB. When I turn on Proof Colors I can see the oversaturation in Photoshop.
I am using a Spyder4 Pro to calibrate.
I have an Asus PA24 wide gamut monitor.
I see the same oversaturation on other consumer level (narrow gamut) computers and monitors.
I've seen similar threads and I apologize if this is repetitive. The other threads got so long and off topic that I couldn't find my specific solution in them. If you know of a thread that may help, please refer me to it. Or if you know the solution, that would be most helpful. Thank you.
Below is an example of Bridge and file explorer showing the same file differently. The Bridge view is what Photoshop is showing me too.

Steve Lenz wrote:
So my assumption is the monitors profile is not the same as the files tagged profile
My goodness, no. If they are, you get what's known as a null transform - IOW the whole color management chain is disabled.
Your document profile is what it is, sRGB, Adobe RGB etc. When that file is sent to the display, those RGB values are remapped into your monitor profile. Put in other terms, the doc profile is converted, on the fly, to the monitor profile. You need both, one is converted into the other.
When you run the Spyder software, it creates a profile and sets it as default monitor profile on OS level, where Photoshop finds it by itself. It also runs a general calibration, but that's not relevant here. Photoshop is only concerned with the profile, which is a description of the monitor's behavior in its current (calibrated) state. Just run the software and let it complete, don't do anything.
Just to get on to some firm ground here: Try to set Adobe RGB as default monitor profile in Control Panel > Color Management > Devices (reboot). Since this is a wide gamut monitor (it is - isn't it?), Adobe RGB is in the ballpark, and it's a known good profile. So that's roughly how it should look.

Color profile problem/question.

These two exports of the same file were taken on my spouse's D300s, and are good examples of a profile problem I cannot seem to solve. This is the identical problem I also experience on the Nikon D700 and D3. The following was exported with the "Camera Standard" profile, and notice the yellow sun reflection on the door panels:
The following was exported with a xrite generated lightroom profile. Notice the better overall contrast, but also the horrendous unnatural yellow on the same door:
This difference causes all sorts of distortion in natural animal hair that contains any red-orange. I use these doors because they are such a stark example. Any attempts to correct with the WB will usually result in too much blue elsewhere. Also I have created many test profiles under many light conditions (both manually and from LR), and they all cause this problem in all three cameras. This is not a matter of one bad cameral, or one erroneously created profile.
I have two questions: Does this example show up well enough to see what I am talking about? If so, can anyone speculate as to the problem or solution? Even guesses would be appreciated since I am out of my own, and not expert in this sort of thing. Thanks!

George, thank you for this information. I have a couple of things for you to try and another question. The ColorChecker Passport color patches are small, so I would suggest trying to reshoot a calibration image with the ColorChecker Passport in the center and filling at least 1/3 of the picture width. In the image you provided the ColorChecker Passport is about 1/8 the image width and far left of center. I know, I know, it should not matter, but give it a try. This is what I'm doing to create camera profiles for all three of my camera bodies (Canon 300D, 600D, 5D MKII), and I have not had a single problem with "color matching" using this procedure AND what I will describe next.
Concerning white balance procedure you say:
Using the grey card of the same product placed just outside the subject crop.
I assume you are referring to the large 60% reflectance white balance card on one side of the ColorChecker Passport, but you do not mention how you set white balance. I suggest using the LR white balance eyedropper tool with the smaller 80% reflectance gray scale patch on the ColorChecker Classic target side. This is the 2nd patch from the left bottom in your picture right next to the brightest 90% white patch. Two reasons for doing this! A higher reflectance patch reduces the influence of camera noise in the image with the LR 5 x 5 pixels eyedropper tool. Here's a LR forum post with a heated discussion on these issues (or lack thereof): http://forums.adobe.com/thread/854734?tstart=60 The second purely empirical reason is the "Classic" target side provides me with more accurate white balance than using the larger 60% card. Perhaps this is a defect with my ColorChecker Passport target, but I don't know.
When setting white balance with the LR eyedropper tool I suggest taking at least five (5) samples of the 80% patch. I use the center, TL, TR, BR and BL corner areas of the patch. Do not use any reading that has a large variation from the others. Please remember that the eyedropper tool is sampling a very small 5 x 5 (25 pixels) area, and image noise or a target paint defect can give you a bogus reading. Write down the temp and tint for each of the five (5) readings, add them, and divide by five to get the "average" white balance temp and tint. Enter the temp and tint values manually into the white balance tool. I create a user preset for each profile which contains only the ColorChecker created camera profile and manually adjusted white balance settings.
I would also suggest you check the readings of all six (6) grayscale patches for neutrality (R=G=B) using your new camera profile and white balance settings. I have found in some cases using the 65% reflectance patch (3rd patch in) provides the most neutral “overall” white balance setting for the six (6) patches. This is despite the fact it contains more camera noise than the 80% patch next to it. Again, this observation is purely empirical – I am not writing a scientific thesis! It works for me and hopefully it will get you closer to what you want.
One thing I am going to do tomorrow is borrow a friends color checker to rule out the possibility mine is defective. It doesn't look defective, but the problem is so consistent.
This is a very good idea! Having worked in a manufacturing environment for over 45 years, trust me when I tell you defective product from even the largest company ends up in the consumer’s hands. Please let us know what you find.

ColorMunki Display calibration and Photoshop profile settings

I am new to color management/color profiles. I feel like I have no idea what I am doing...
A couple of days ago, I calibrated my monitors using a ColorMunki Display. Everything looks great, but today I realized that the same files opened in Photoshop look "off" compared to the same files viewed in Dreamweaver or any web browser. I mostly work for web, but I do also frequently work in print -- I'm concerned that the colors I see on my screen are way off from what my clients may be seeing on theirs (I understand every client will have their monitor color settings set up differently, but I'm at least going for ballpark range here).
I'd like to create a consistent workflow between all of my Adobe CS5.5 Creative Suite programs and my web browsers, primarily, but I'd like them to also be as consistent as possible to what I'm seeing in print - on my Pantone chip book, for example. Is this even possible? After spending an hour looking up color resources online, I see this topic is MUCH more complicated than I would have imagined.
Thanks in advance for any help!

OK. How do you know that Photoshop is correct? I'm not challenging you, just trying to understand. Before I calibrated my monitors using the ColorMunki Display, colors of web screencaps displayed as expected in Photoshop. Now, the colors look very saturared in Photoshop; it's possible that this is how my clients were viewing the documents on their computers, but I kind of doubt it - just my gut feeling.
I figured out that I can assign the new ColorMunki color profile to my single documents in Photoshop (Edit > Assign Profile), which does make it consistent with the colors on my browsers. So I understand, is there a solid reason I shouldn't be doing this? Are the super saturated colors that Photoshop is showing me representative of what my clients will be seeing on their browsers?
Thanks again for your help, Andrew.

Color Profile Problem

Hey, I have a question about color profiles.
If you go to system preferences -> display -> color, and use "Color LCD." Now click on "calibrate," use expert mode, and click continue all the time. does the screen change at all?
Mine seems to become greener, is that a problem?

Hi haginile,
When you start the calibration did you follow the instructions and move the sliders around until the Apple icon in the box looks neutral gray to you before hitting the continue button?
Jrsy
Actually I forgot to mention that you need to adjust both left and right sliders through each of the five calibration steps before continuing to the next step.
Message was edited by: Jrsy Man

X300 color profile problem

Hi. Just got an X300. Like all my laptops and desktops, I do a color calibration using Datavision SpyderPro2 to create a color profile that is near-professional. The calibration runs fine on the X300, and the profile loads at startup which triggers the correct color profile and color balance and it looks great.  But just a few minutes later, magically, the X300 reverts back to the default color profile, essentially ignoring/ejecting the color profile I created with Spyder Pro.
What is the cause of this? Why would the X300 accept, then later on, reject and revert back to the default color profile (which, btw, is waaaaay too blue).
Thanks
Message Edited by JayNYC on 04-26-2008 07:45 PM

i had a hunch you were using vista.
LUT = look-up table.   it's the table used by your video card driver to determine how each color has to render.   by changing values in this table, each color can be made brighter, darker, or shifted in hue.
the way i worked around the vista issue is to set a schedule in task scheduler to run the LUT loader roughly 15~20 seconds after login.   this covers both login after boot and after recovery from sleep.   it's a PITA but is the only workaround i can think to do.
i briefly glanced over the article you've linked above and it sounds like exactly what i went through back in august when i received my T61p and first used vista.   i'm still using vista today and have since decided to live with the added headache with vista's color management interface (or lack thereof).
if all you need to do is remove color cast then seriously consider using the gamma controls in the "color correction" section of the intel GMA control panel.   if your display appears too blue then just knock the brightness down on the blue channel until it looks good to you.   since you aren't doing design work with the X300, this will be a perfectly viable solution.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Hot to create color profile if I can't disable color management?

I have Canon PIXMA iP4600 printer. I wanted to create custom color profile for Canon Photo Paper Plus Glossy paper, but I can't disable color management in the Print dialog. There are two options: SolorSync (and I have to pick some color profile I'd like to use), or Canon Color Matching. There is no way to disable color management.
I tried to create custom profile by choosing Canon Color Matching, but it turned out to be way worse than the original Canon profiles. Jeans in printouts are not denim blue but ultramarine! I suspect this is because profile target was printed with some color profile enabled.
I just thought maybe there are some "fake" printer profiles out there? Profiles which don't translate anything and what goes in, comes out 1:1? This way I could work-around this problem.
My problem is that in printouts I need little bit more more saturated greens and 4-7% less red component.

Hello Guntis,
As you have seen with the Canon iP driver, there is no function to disable color management, you either select ColorSync or Canon Color Matching.
When you select ColorSync, your output will use the default profiles assigned to the paper stocks for the Canon driver. If you wanted to see the Lab plot for that particular stock, open the ColorSync application and select the Profiles pane. If you then expand the Other entry you will see all the profiles for the default paper stocks for your iP4600 and their respective color gamuts.
If you then wanted to check which paper stock matched the code names, such as SP, MP and PR, you could select to print from an application and open the Color Matching menu. If you then set the option to ColorSync and leave the Profile set to Automatic, then open the Quality & Media menu and select Photo Paper Plus Glossy and then switch the menu back to Color Matching, you will notice that there will be writing under the Profile menu, stating the profile used - in this case SP2.
If these default values are not delivering the color output you want, then I suggest you set the Color Matching menu to Canon Color Matching and then use the Color Options menu to tweak the Magenta and Cyan values to boost the greens and reduce the reds.
Note that you should also set your application to let the printer manage the color.
Pahu

Print driver/color profile problems after 2.0 update

Since I updated to the latest version of aperture 2 I have had problems with printing on my canon 5200R printer. The coloring is way off, as if aperture does not seem to recognize the canon print drivers or color profiles. I have read about printing from another program but was so happy with color quality using aperture 1.5, is there a fix for the current problem?

Bump.

Does 23" Apple Cinema Display support sAdobe Color Profile?

i was told the 23" Apple Cinema display does not support sAdobe color profile, can anyone confirm if does or not, thank.

I take it back. NEC sell a monitor that acheives 107% of the Adobe Color Space.
http://www.necdisplay.com/Products/Series/?series=800fe9d4-c3a9-410a-98ee-6f546c e833d4
NEC seem to be a leader in this regard.
http://www.nec.co.jp/techrep/en/journal/g06/n03/060316.html

Color profile problems and text issues

hello all!
recently, after installing the java update i ran across some permissions problems when doing a permissions repair.
these java permissions seem to be the result of database updates and are fairly innocuous.
however, since then, my color profiles are screwed up. things look horrible. some pictures are fine, some bad. at first i thought it was just safari, but it's system wide. i've tried repairing permissions again but to no effect. i've downloaded the profiles from adobe and copied them into the profiles directory in library. no effect.
some profiles show up twice on the list. when i select, for instance, the second listing, the selection moves to the first listing. do you follow?
when i run the profile first aid this is what i get:
Searching for profiles...
Checking 88 profiles...
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Required tag is not present.
Tag 'B2A1': Required tag is not present.
Tag 'A2B2': Required tag is not present.
Tag 'B2A2': Required tag is not present.
Tag 'gamt': Required tag is not present.
The file is locked. Could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Required tag is not present.
Tag 'B2A1': Required tag is not present.
Tag 'A2B2': Required tag is not present.
Tag 'B2A2': Required tag is not present.
Tag 'gamt': Required tag is not present.
The file is locked. Could not be fixed.
/Library/ColorSync/Profiles/EW-sRGB
Tag 'desc': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EPSON Perfection1250
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Tag 'dmdd': Tag size is not correct. Could not be fixed.
/Library/ColorSync/Profiles/EPSON Perfection1250 TPU
Tag 'dmnd': Tag size is not correct. Could not be fixed.
Repair done - 0 out of 5 profiles fixed.
any suggestions would be most welcome. possibly help on reverting to the earlier java would be nice..don't know if that'll help but it started back then.
thank you!
cheers,
sean

okay, a boot up into safe mode and everything looks great, the way it should. everything looks awesome in another user account too.
so, it user specific. i've discovered these issues affect safari and not firefox. images in ff look fine.
if there are font or profile issues, how do i go about finding what might be broken in my main user account?
can i just transfer everything to a new user account? what are the steps involved?
thanks again for any help!

Display Calibration Creates Color Profile Problems.

Similar Messages

Maybe you are looking for