Display/Change/Delete of planning object not working in BPS

Hi Guys
While displaying or changing object in planning workbench, system is taking too long to process the request and request doesn't completes even in hours. The following operations are not working
1. Delete Planning Area/Level.
2. Display/Change planning Level.
3. Display/Change Planning Layout.
4. When clicking on Variable Tab of infoarea.
5. When clicking on Set variable button.
In all of the above mentioned cases System displays a message "Generating Environment" and it runs for indefinite time.All this is ha0
We are on Suppport Pack 12 of BI NetWeaver(2004S)and we are using BPS for our planning application.
Thanks
Tripple k

Hi Dear
Thanks for info. i know that it will take some time to regenerate the BPS classes after making changes in cube but in my system its taking at least half an hour which i think is too much.....i don't think that its normal behaviour of system...
Thanks
Kamal

Similar Messages

Project Plan icon not working

The little icon found on the left that allows you to access your project plan is not working for one of my project managers, who is the owner of that specific project. However in the Admin's view they are able to access it by clicking that button.
Any thoughts why?

Hi EPM Admin,
The issue occurs only for 1 PM? Is the icon working for this PM with another view? Can the PM try on another machine? When you say that it doesn't work, do you have any error message or just nothing happens? Have you tried refreshing IE deleting the cache
(press CTRL F5)?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

Yahoo mail tool bar (delete,more,spam,etc) not working in firefox.Works in Explorer.Web points to Mozilla update."Plug-ins" up to date. Solutions?

Yahoo mail tool bar (delete,more,spam,etc) not working in firefox.Works in Explorer.Web search points to Mozilla update problem."Plug-ins" up to date. Solutions?
I've used firefox for years now with out problems. Now that help is needed, Could you make this any more frustrating? I thought I was asking Mozilla help and I'm sent to "users". I went there 1st! there are similar questions but no answers. I've lost time and data. Is there any REAL PEOPLE to help with firefox problems?

I'm a real person, thanks.
If you mean, does Mozilla have paid staff you could phone or email, the answer is "No."
Is the problem with a feature of the Yahoo! mail web page itself, or the Yahoo! toolbar?
General advice:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
* click the padlock or globe icon in the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?
Could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
and OK the restart.
''Both scenarios:'' A small dialog should appear. Click "Start in Safe Mode" (''not'' Refresh).
Any difference in how Yahoo! works?

JMaskField mask input : delete and backspace do not work

I am using this package for formatted input.
Delete and backspace do not work if the field is created with a default text as in the code snippet I attach. Did somebody managed this to work? How? delete and backspace work badly in everycase anyway.
best regards
-Mangi
MaskMacros macros = new MaskMacros();
macros.addMacro('*',"[a-zA-Z0-9]");
macros.addMacro('#', "[0-9]");
macros.addMacro('@', "[a-zA-Z]");
macros.addMacro('%',"[A-Z]");
macros.addMacro('*',"[a-zA-Z0-9]");
MaskField2 k = new MaskField2("CODE******",macros);

Nope, I don't think those keys are even "firing" as another person worded it. I can push the buttons down, so they aren't stuck but it doesn't seem to be sending any signal.

On iTunes 11.0, how do I delete and App from iTunes? I tried selecting the App to be deleted and pressing Delete, but that did not work.

On iTunes 11.0, how do I delete and App from iTunes? I tried selecting the App to be deleted and pressing Delete, but that did not work.
MoragaTom

I have the same problem on my iPhone - an app I want to delete but can't. The app in question doesn't show up on the list of apps i iTunes and doesn't show an 'X' when it starts to wiggle. All the other apps do, but not this one. It's definitely an app. How do I get rid of it, please?

I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. I am using a Mac if that makes a difference.

Question
I want to eliminate an autofill choice that pops up when I sign into yahoo using the Firefox browser. I tried yahoo help which said hover over the unwanted line and press delete, but that did not work. Do you know how I can get rid of this autofill? I am using a Mac if that makes a difference. Thanks.

Use Shift+Delete on Mac.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.

How to display changes of inspection plan via t-code :CBWQM ?

Dear all,
We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
Regards,

QP61 Display change documents insp.plan?

I got locked out and changed the password. it did not work and now its disabled for 60 minutes. I dont use itunes, or icloud. how can I get in and why wont it work.

I am locked out of my iphone. I changed the password and it still wont work. I changed it again and it is now disabled. I do not use itunes, icloud. How can I get into my iphone? I have changed my password and its not working. how can I start over?

Follow the instructions in this support document. http://support.apple.com/kb/ht1212
Without a backup, the use of iTunes or the use of iCloud, your only choice is to restore the device as new to remove the passcode.

Quicktime objects not working on GoLive

I have a GoLive CS2 Student Version. My Quicktime Objects are not working. I tried to drag the track objects to the page or to layer and no avail.
Can you help me? I spent a whole day to finally figure out the Quicktime objects not working.

Thank you for the support John,
To explain what I am doing in more detail: I am basically making an image gallery with thumbnail buttons of each image. When the user enters this page I want to have the automatic slideshow of a few images. Then the user have the option to click on the buttons to see the images. I was able to make a slideshow in GoLive. But the transition is abrupt. According to the GoLive Help Menu there is a way to make the trasnition smoother using the timeline editor, but it is too difficult to follow up for me. So I downloaded another program called SWFn'Slide which was very easy to make the smooth transitional slideshow. Now I am trying to insert the SWF file into my page. But I can't figure out how to do it. In my understanding, I must place a layer on the page and on that layer I must place the SWF track from the Quicktime Objects tab. But I cannot drag any of the Quicktime Objects tools into the page. Again I am having a problem inserting a SWF file into the page.

Appraisals EHP4 - multiple reference objects not working in the same TAB

Dear SAP Experts,
I am working on MBO Performance Mgmt EHP4. I have created an appraisal template and testing this in MSS.
Now the structure of the template has a VB object called u201CMy Developmentu201D.
Within this VB Object I have created two other VB objects in the following order called
u201CSuccess Profilesu201D and
u201CAdditional Areas of Developmentu201D
The business requirement is to
a)     within success profiles have the requirements of the position of the appraisee to be defaulted
b)     then have the ability for the Manager to select one of the requirements and select the ADD functionality to add another element which has 4 customs columns to then be completed by the Manager
c)     Within u201CAdditional Areas of Development, the Manager needs to be able to have an ADD button to create the 5 custom columns to be completed by the Manager.
The good newsu2026u2026..I have created the structure ok, with custom columns and have used fixed enhancement for defaulting the requirements of the appraiseeu2019s position and then having the reference object to each one of these requirements to then create 4 additional fields when the Manger selects the ADD button next to each requirement.
I have also used a separate set of reference objects to have an ADD button against the VB object u201CAdditional Areas of Developmentu201D which is in the sequence after the VB object Success Profiles, then this will allow the creation of the 5 columns ok and works fine.
I have also used the reference object for the Success Profiles which would expect to show the ADD function to add the new element with 4 fields. Also the ADD function for the u201CAdditional Areas of Developmentu201D appears.
I have created the config to display the My Development as a tab and have both the u201CSuccess Profilesu201D and the u201CAdditional Areas of Developmentu201D within this tab.
The bad newsu2026.. When I select the ADD button against the VB object u201CSuccess Profilesu201D nothing happensu2026u2026u2026
The defaulting of the requirements of the appraiseeu2019s position into the appraisal document under the Success profiles ONLY works if the VB object u201CAdditional Areas of Developmentu201D is DELETED from the appraisal document.
However, when I delete the VB object u201CAdditional Areas of Developmentu201D the ADD of the VB object for Success Profile now works
So it only seems to work if I delete the u201CAdditional Areas of Developmentu201D VB in the document which seems wrong to me.
Please can someone advise
Thanks
Oliver

Hi SAP experts,
does anyone have an answer to my question above.
Much appreciated it
Not sure how to get screenshots stored in SDN f someone could explian.......
Thanks
Oliver

Reassign Track Object not working

For some reason the "Reassign Track Object" function doesn't seem to work for me. By this I mean, reassigning a track object does not change MIDI routing. For example, I can create an empty project with one software instrument track, set it up with any old synth for input, and the reassign the track object to "No Output", but when I play something on my keyboard the synth still plays. Or I can reassign a track object to an Arpeggiator connected to the synth, and notes are not arpeggiated (I am aware you have to have pressed play... no dice).
What's odd is that while the name on the track in the actual track listing changes to, say, (Arpeggiator), the name of the track in the inspector doesn't change (it folds up, but I can still open it and make changes to the track object that the track shouldn't be assigned to anymore). Any ideas how to resolve this? It's pretty annoying, since I apparently can't reroute any of the MIDI data entering the arrange window.
I just tried playing with all of this for the first time and at the moment I'm not connected to all of my usual gear, which means when Logic opens it displays the following messages:
The previously selected audio interface is not available.
and
Device "microKONTROL #2" is assigned to MIDI Port "Port 2" which is not present.
Don't know if these messages are relevant...
Thanks!

Hey SURANJAN,
It looks like you have a MacBook, so I'd start troubleshooting the trackpad issues with these steps:
Try disconnecting the MagSafe connector from the computer and check the trackpad function. If the trackpad becomes responsive again, improper grounding may be the issue.
If a two-prong AC plug is being used with the power adapter, try using the three-prong power cable that shipped with your computer and plug it into a grounded outlet.
If the issue persists, make sure the third prong is present and do not use an adapter to enable the three-prong adapter to be used in a two-prong outlet. Note that the ground in the three-prong outlet may not be connected. This is common in older homes or buildings with replaced outlets. In these situations, the three-prong power cable will not improve trackpad responsiveness.
If a grounded outlet is not available, rest your palm on the palm rest when using the trackpad. This should enable the trackpad to function properly.
via: Intel-based Mac notebooks: Troubleshooting unresponsive trackpad issues
http://support.apple.com/kb/TS1248
And, also, the steps in this document:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/TS1449
Have a great day,
Delgadoh

"Delete All Backups" command not working...

I just started using Time Machine for the first time about a month ago with my new MacBook Pro. Recently, it started notifying me that it was out of space and automatically deleting the oldest backups, which I thought was odd, because my external Time Machine backup partition is 500GB and my startup disk only had 150GB of data (on a 260GB partition). Well, after checking the backups I quickly found the problem. I have three partitions on my internal drive, and Time Machine was backing them all up (I had thought Time Machine would only back up my startup disk). So I added the other two partitions to the "disks to Exclude list". That part worked and my new backups only include my startup drive. But I want to get rid of the all the backups of my other partitions, so I opened up Time Machine and tried to manually delete their backups, but it's not working.
I've read that you can select the volumes/folders and choose the "Delete all backups of ..." option to remove them. I also read that it should take some time to complete this. But it's been over 24 hours and still it hasn't removed any of the backups I want to get rid of. And there seems to be no activity on the Time Machine drive. So what gives? Why isn't Time Machine honoring my request to delete all backups of these partitions/folders? I've repeated the process a few times, and each time the authentication dialog appears and my password is accepted, so everything looks like it should work, but it hasn't.
My first thought was that maybe Time Machine won't delete the backup of a folder/partition that it's already excluding. So I turned off automatic Time Machine backups, and removed the two partition volumes from my exclude list and then tried again to delete all their backups. It's been a few hours since then, and still nothing is deleting. How long should it take? And is there some trick to manually deleting the backups outside of Time Machine that I could try?
I guess if nothing else I could try and reformat the Time Machine backup disk and start over, but I shouldn't have to right? This is really puzzling...

daehl wrote:
SOLVED!
Yes, It appears that Time Machine CANNOT delete files that are locked for some reason.
that's not true. it's perfectly capable of doing that.
Originally I assumed that since I could not delete a file directly from within the Time Machine volume's "Backups.backupdb" subfolders, that I would not be able to unlock it. But you can! I simply located the files in the backup, chose Get Info on them and un-checked their "Locked" checkbox.
something is really wrong with your backups. you should not even be able to unlock any locked files in TM backups as they should be all protected by hidden ACLs to prevent people from messing with them from finder.
And the lock status change took effect! Then went back to Time Machine and chose "Delete All Backups of..." and selected the volume in that backup, and they instantly disappeared!!!
That's pretty strong empirical proof that Time Machine has a problem with locked files.
no, it's a strong evidence that your TM backups are messed up.
I have repeated it with about a dozen various files that were locked and all behaved the exact same way. So I think this is pretty strong evidence to a "bug" in Time Machine!

New MBP mini Display Port out to TV (HDMI) not working

Sorry, I just realized I put this in the Original Folder not the Late 2008 folder.
I bought a new MBP 2.4 GHz, 4 GBs RAM machine in January of this year, 2009. Model Identifier 5,1. I wanted to connect it to my TV's HDMI port. Only interested in getting video to TV since I run sound through a sound system. I have been using my MacBook Air's DVI adapter to a DVi - HDMI cable. I have a Sony Bravia 40 HD tv. Video works just fine from my MBAir, can change resolutions to anything and video works perfectly (audio has a little problem though - high frequency hum out of the MBAir's audio port). That's why I want to change to my MB Pro - audio from the New MBP is good.
With my new MBP, using it's Mini out- DVi connector and using the Same Video (HDMI) cable that I used with my MBAir - it doesn't work. The Display Preference does not detect the TV ever. I just get a black screen on the TV. Not even a flash on the TV like it's trying to connect - nothing.
I can pull the cable out of my MBP 2.4 and swap the DVi connector to the MBAir's cable and put it in the MBAir and it works just fine. Swap it back to the new MBP and nothing.
I have tried two different MBP Mini DVI out connectors, thinking one was bad. I even took the connector I use with the MBAir with me to the Apple Store to have them match the connectors, so I would be assured that I got the correct one. Oh by the way, my MBAir is the original one, not the newest one.
I have read a lot of links on the website where people are having trouble with Monitors using the new MBP Mini DVI video out but could not find any thread that matched my TV problem.
Any suggestions or explanations would be greatly appreciated.
Thanks,
Jim
Message was edited by: Jim Humphrey
Message was edited by: Jim Humphrey

Hi Jim,
Just to clarify, you state that you have a MacBookPro5,1, which is the late 2008 model. The video output on that model is a mini-DisplayPort, not a mini-DVI (like the pre-unibody MacBooks) or a micro-DVI (like your 1st gen MBA). DisplayPort is a different type of port. (Note - I requested an edit of the title of your post to clarify that).
When you connect the TV, in what sequence are you connecting? The 'proper' sequence is to connect the DVI-HDMI cable to the mini-DisplayPort to DVI adapter, have the HDMI end connected to the TV, have the TV set to Line-In, looking for a signal, then connect to the MBP last.
What happens when you connect it like that? Have you tried System Preferences > Displays > Detect Displays?

Maxl statement (display user in group all;) is not working.

Hello,
Hyperion version 9.3.1 upgraded to 9.3.3. Not sure the below issue is because of this
I have an interesting issue with a maxl statement : "display user in group all;". When I execute this statement through command prompt doing essmsh, it does give out any records and also doesn't end. I will have to end it with ctrl+c.
When I execute it through EAS console, then EAS console just hangs.
But, if I try to retrieve the users from groups individually ( I mean "display user in group 'examplegrp';"), then its working fine and throwing out the records.
It is giving me a hard time and my dumb mind not able to figure it out.
Any ideas please?
Thanks

Hi CL, Yes I ran it on the Essbase Server. We actually set it up through a scheduled batch script which was perfectly fine till last month (I guess). We noticed this just a week ago. The only change we had in our environment is that we upgraded 9.3.1 to 9.3.3 recently. Not sure whether it is making any difference.
Thanks,
KK

Display/Change/Delete of planning object not working in BPS

Similar Messages

Maybe you are looking for