Display Chinese Word In Crystal Report's Cross-Tab

Hi all,
I am trying to display chinese word in my cystal report. It can be display correctly in detail, page header or formula. But when come to cross-tab, it just will show some funny symbol on it. any idea?
i am using Crystal report xI release 2.
Thank You
Wong

Hi,
I solve it.Just for your reference, change the font type inside cross-tab.

Similar Messages

  • Crystal Report 2008 - Cross tab in subreport doesn't expand horizontally

    Hello,
    i'm migrating all my company's reports from crystal report X to crystal report 2008.
    And i'm facing the following issue:
    when a sub-report contains a cross-tab that is too large for one page, in crystal report X a second horizontal page is generated, but in Crystal report 2008 the second horizontal page is not visible.
    Is it a known bug, is there a patch to install?

    Hi Abhilash,
    thank you for your answer, but this workarround does not works in my case.
    My main report is just a container for multiple subreports and some of them contains crosstab that can grow on several pages horizontally and vertically.
    For example i have some crosstab that can span on more than 5 pages vertically and on 2 pages horizontally.
    I tried to create an empty cross tab that span on 2 horizontal pages in the main report, and to mask it. That works for the first vertical page of the subreport but only for this one. Moreover if the first page of the crosstab contained in the subreport does not span horizontally, this solution create an unwanted empty page.

  • Crystal Reports 10 Cross Tab Report Issue

    I created a Cross Tab Report with multiple rows of data.  It has two columns to return data for Year 2008 and Year 2009.  When reading the database the report does not return data for rows that have a result of 0 in both columns even though Suppress Empty Rows is NOT checked in the Cross Tab Expert Customize Style Tab.  Any suggestions as to how to get all of the rows to display including those with results of 0?

    I'm guessing that your issue is that "results of 0" is really a lack of data, not that something is there and is summing to zero.
    In that case, you need to base your report on an SQL Command.  Take the SQL that the report is currently using, and UNION it with another select statement that returns all of the rows that you are looking for with zero values; something like this:
    UNION
    select category, 0 as PY_Value, 0 as CY_Value
    from categories
    This will cause the data to be there, which will cause the rows to display on the cross tab.
    HTH,
    Carl
    (Resolution for 2010:  Count the number of times this question is asked!  :->)

  • Cannot Display Chinese Word if pdf preview for PLD layout.

    Hi,
    I am facing a problem when user pdf preview the pld layout with chinese word, the content will be blank, it will not be displayed. Print preview work fine for chinese wording.
    I had tried to change the font to every chinese character through the drop down list, but it still happen the same.
    I had check the pdf version, it can display chinese wording that not from SAP.
    I had search in the community, but none of them meet my requirement, as most of them happen in crystal report.
    Can anyone help? Anyone experience before?
    Another thing is, why in the General setting > path, there is no setup for pdf?
    Thanks

    Hi,
    Please refer SAP note for solution:
    1406074 - Chinese / Japanese Characters not exported to PDF
    Thanks & Regards,
    Nagarajan

  • Display chinese word on ALV

    I have a program that will generate a report in ALV format, some of fields included chinese word, can't show properly, but it can be shown properly when export to spreadsheet. How can i display those chinese word in ALV report? Thanks!

    Hi,
    In GUI_UPLOAD function module there is an import parameter "CODEPAGE" , here if you pass the code page for chinese character then you will be able to view the chinese character after uploading the excel sheet and storing it in the internal table.
    Specify the code page parameter explicitly (in case the files are to be read or written in a specific code page).By default the codepage of the Operating system is picked up if nothing is specified. Sample code as follows:
    Data : fend_filename type string ,
      p_rcpage type abap_encoding.
    call function 'GUI_UPLOAD'
         exporting
           filename                      = fend_filename
           filetype                        = 'ASC'
    *      HAS_FIELD_SEPARATOR           = ' '
    *      HEADER_LENGTH                 = 0
           read_by_line                  = 'X'
    *      DAT_MODE                      = ' '
           codepage                      = p_rcpage
       *      IGNORE_CERR                   =  ABAP_TRUE
    *      REPLACEMENT                   = '#'
    *    IMPORTING
    *      FILELENGTH                    =
    *      HEADER                        =
         tables
           data_tab                      = itab.
         ret_code = sy-subrc.
    I am not so sure but If it is set to Chinese, it uses code page 4102 (Unicode). Else find the corresponding code page using FM NLS_GET_FRONTEND_CP.
    Hope this helps.
    Regards,
    Neelanjana

  • Display latest instance of Crystal Reports in SharePoint 2010

    Dear Sirs,
    I have BO 4.0 and SharePoint 2010 and Integration Option.
    I need to display latest instance of Crystal Reports in SharePoint webpart.
    I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
    But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
    Is it possible to display latest instance of Crystal report in SharePoint Web Part?
    Best regards,
    Emmo

    Dear Sirs,
    I have BO 4.0 and SharePoint 2010 and Integration Option.
    I need to display latest instance of Crystal Reports in SharePoint webpart.
    I'd like to add "IOMS-Crystal Report Viewer" Web Part and display latest instance.
    But in Settings (in SAPBusinessObjects tab) I need to type only CUID.
    Is it possible to display latest instance of Crystal report in SharePoint Web Part?
    Best regards,
    Emmo

  • Display chinese words in textbox

    Hi All,
    I want to display chinese words in textbox ....so i have a page with textbox where i type chinese words and press save button it saves in database numeric code....but when i retrieve that value in textbox from database it does not show same word , it shows numeric code...
    so, how can i display chinese words in textbox....
    any ideas
    Thanks a lot..

    textbox which takes text data from user..
    <input type="text" value="" id=""/>

  • Displaying other columns/tables apart from a cross tab

    Hi,
    I designed an RTF template. This contains 3 tables. First table contains the invoice information. 2nd table is the cross tab and 3rd table contains the aging details. My requirement is to print the other tables in all pages if the cross tab goes to multiple pages. Presently all the tables are displayed in the 1st page only. If the cross tab output goes to next page then the 1st and 2nd tables are not being displayed in other pages.
    Can anyone suggest me how to display the other columns/tables apart from cross tab columns if the cross tab output goes to multiple pages.

    Can u plz send me the sample xml and the template so tat i can help u frm my side...

  • Hierachichal display is not coming for field in cross tab crystal report

    Hi,
    I have a dimension  "Cost center" in DSO on which Hierarchy is defined in SAP BI.
    When I developed one cross tab report on this DSO, values for Cost Center fields are displayed in flat mode and not in Hierarchical mode.
    I also set group option on this "Cost center" field  in report And in Report menu "Hierarchical Grouping option" also check box ticked for "Sort data hierarchically" and also selected Instance id field.
    how to get this?
    **Note: same problem when report is developed on Infocube.*+
    Please help me.
    Thanks,
    Dhana.

    Hi Dhana,
    I've created a similar report to show matrix WBS x RBS, and WBS are grouped hierarchically.
    My report developed in this way:
    - I've created Hierarchical group located in detail section of report. In detail section I've put the row field of cross table.
    - I've suppress all this section: group header, group footer and detail
    - I've created the cross table in Report Footer
    The report show correctly
    Regards
    Sandro

  • Display Dynamic Columns in Crystal Report

    Hello,
    We are currently using Crystal Reports XI and connecting to an ADO .NET XML file as our data source. In this data souce we have a data table called IDENTIFIERS where every column, except for the ones used for joining tables is dynamic. These column will be different for each database thats its run against.
    Is there any way to display these dynamic columns without having consistent column names?
    You help is much appreciated.
    Thanks,
    Adam

    Thanks Carl,
    We do have control over the data table and a solution like this had crossed my mind. But this might not be practical for other reports that use this data table.
    I think another solution would be to create a new data tabl that has all identifiers on their own row as opposed to columns.
    id
    dentifier
    identifier_name

  • Amount in words in crystal report

    Hi all,
    I am new to crystal report.
    What i need is i need to create a formula for amount to display in words.
    That is,
    if the value is AED 15,68,595 then i need this to be converted into
    " one million five sixty eight thousand five hundred ninety five only"
    That is,
    10 lakhs is equal to 1 million,
    then 5 lakhs is equal to 500 thousand + 68 thousand,
    five hundred and ninety five.
    Help me solving out this issue.
    Regards,
    Janani

    HOW TO IMPLEMENT THE LOGIC.
    STEP1: IN CRYSTAL REPORT  RIGHT CLICK N  FIELD EXPLORER RIGHT CLICK ON FORMULA FIELD AND THEN CREATE NEW..EXAMPLE WORDS
    STEP2:UNDER FORMULA FIELDS CLICK ON WORDS AND THEN CLICK ON EDIT..
    U CAN SEE THE BELOW FORM
    THE BELOW CODE JUST COPY AND PAST IT..
    IN THE BELOW BOLD COLOR U HAVE CHANGE ONLY ONE LINE..
    ORDR.DocTotal I AM USING ORDER.DOCTOTAL
    IN YOUR CASE THE AMOUNT IS COMMING FROM WHERE WHICH TABLE AND FIELD
    THAT IS ENOUGH
    numbervar RmVal:=0;
    numbervar Amt:=0;
    numbervar pAmt:=0;
    stringvar InWords :="";
    Amt :={ORDR.DocTotal};
    if Amt > 10000000 then
    RmVal := truncate(Amt/10000000);
    if RmVal = 1 then
    InWords := InWords + " " + towords(RmVal,0) + " Crore"
    else if RmVal > 1 then
    InWords := InWords + " " + towords(RmVal,0) + " Crores";
    Amt := Amt - Rmval * 10000000;
    if Amt > 100000 then
    RmVal := truncate(Amt/100000);
    if RmVal = 1 then
    InWords := InWords + " " + towords(RmVal,0) + " Lakh"
    else if RmVal > 1 then
    InWords := InWords + " " + towords(RmVal,0) + " Lakhs";
    Amt := Amt - Rmval * 100000;
    InWords := InWords + " " + towords(truncate(Amt),0);
    ProperCase(InWords)
    STEP3: IN FORMULA EDITOR JUST CLICK ON X2 ICON FOR CHECKING ERRORS IN THE
               FORMULA
    AFTER THAT PRESS OK..
    STEP4: JUST DRAG AND DROP WORKS INTO CYRSTAL REPORT THIS IS ENOUGH

  • Capturing and displaying user input in Crystal Reports

    Hi all,
    Iu2019m creating a crystal report with SAP as data-source and want to capture user input and display it on the report.  I have defined parameters to capture the input and added them to the report header.   I have then created formula fields to capture user input using the JOIN statement to accommodate multiple values.   Everything works well when users enter values for all the parameters, but when they leave some blank I get an error message u201CParameter value is nullu201D.
    Has anyone encountered this type of problem;  Anyone knows how to resolve this?

    Hi
    In parameter window make the Optional prompt to True.  And change make change in your record selection formula like this :
    (not HasValue({?PrjMgr@SELECT Firstname,lastname FROM OHEM}) OR
    ISNULL({?PrjMgr@SELECT Firstname,lastname FROM OHEM}) OR
    ({?PrjMgr@SELECT Firstname,lastname FROM OHEM} = '') OR
    {OHEM.firstName} = {?PrjMgr@SELECT Firstname,lastname FROM OHEM})
    Regards

  • Display HTML code in Crystal Reports

    We have a field in the database in which the data is encoded HTML, it includes links to images.  I have tried to use the RTF/HTML interpretation option for the field but it doesn't work.  I saw on the other thread that there's limitation to displaying HTML - I am using Cyrstal Reports XI.  So the crysal can't understand img tags correct?  I am allowing users to do just about anything with HTML so it's hard to find a workaround if the we have to limit the tags.  Would this issue be fixed in the future?  Any piece of advice how to handle this would be great!
    Thanks.

    Hi Pizzaz,
    The HTML tags that are supported by Crystal Reports are:
    " html
    " body
    " div (causes a paragraph break)
    " tr (causes only a paragraph break; does not
    preserve column structure of a table)
    " span
    " font
    " p (causes a paragraph break)
    " br (causes a paragraph break)
    " h1 (causes a paragraph break, makes the font bold
    & twice default size)
    " h2 (causes a paragraph break, makes the font bold
    & 1.5 times default size)
    " h3 (causes a paragraph break, makes the font bold
    & 9/8 default size)
    " h4 (causes a paragraph break, makes the font bold)
    " h5 (causes a paragraph break, makes the font bold
    & 5/6 default size)
    " h6 (causes a paragraph break, makes the font bold
    & 5/8 default size)
    " center
    " big (increases font size by 2 points)
    " small (decreases font size by 2 points if it's 8
    points or larger)
    " b
    " i
    " s
    " strike
    " u
    And the supported HTML attributes are:
    " align
    " face
    " size
    " color
    " style
    " font-family
    " font-size
    " font-style
    " font-weight
    Hope this helps you!
    Regards,
    Anindita

  • Paginacion Word editable crystal report

    Buenas
    Tengo un problema al exportar a word editable, me sale en todas las pagina page 1 de N, en los otros formatos si me sale bien. El cliente necesita editar y por eso es necesario exportarlo a este formato.

    Hi
    Need more info.
    - What version of Crystal Reports are you using? What patch level?
    - What version of Visual Studio?
    - is it a windows or a web application?
    - Does this happen on dev box or server?
    - Does the report view and export fine from CR designer?
    - What happens when you export the report using viewer export button to any other format e.g. PDF, excel?
    - How are you exporting the report, using the code or viewer export button?
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

  • Pagination word editable Crystal Report

    Hi,
    I have a problem when I export to Word editable in Crystal report. the header constains only the text from de first page on every page (page 1 of 9) I need to solve this because the client needs to edit the document.

    Hi
    Need more info.
    - What version of Crystal Reports are you using? What patch level?
    - What version of Visual Studio?
    - is it a windows or a web application?
    - Does this happen on dev box or server?
    - Does the report view and export fine from CR designer?
    - What happens when you export the report using viewer export button to any other format e.g. PDF, excel?
    - How are you exporting the report, using the code or viewer export button?
    - Bhushan
    Senior Engineer
    SAP Active Global Support
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Getting started and moving ahead with Crystal Reports .NET applications.

Maybe you are looking for