Display Column only when Current Year Selected
Hi Gurus,
1)I have a Req where in I need to Display a Column only when 2012 is selected,It shouldn't appear when i select 2010 & 2011 in the Prompt.
2)I have to display a column only when the Last month of the Quarter is selected.
Any help???
Hi,
Make it two reports, one with the column and the other report without the column. Place both the reports in two different dashboard sections and use conditional show/hide section as explained here,
http://total-bi.com/2011/01/obiee-hide-show-sections/
Regards,
Dpka
Similar Messages
-
Display the icon when current node selected in af:tree
Hi !! Gud Mrg !!
I am using jdeveloper 11.1.1.5
I had created an af:tree., I need to display the icon when my user clicks the current node!!
Could any one pls provide me solution to fix this !!Sorry jhon and Frank !!
I will explain what i had did and my scenario!!
What i had did
I had dragged and dropped my ApplBusFun as a af:tree
Such that it doesnot have parent and child My tree would look like this
Request for quotation
Supplier Documents
Suppliers
Purcahse Order
My Scenario
My scenario is when my user clicks the current row ., Consider if my user clicks Request for quotaiton an arrow symbol must be appeared before Request for Quotation such that my output must looks like this
==>Request for quotation
Supplier Documents
Suppliers
Purcahse Order==> This is the icon which appeared before Request For Quotation and this icon must appear whenever user clicks any node Suppose if my user going to click Supplier Document means
My output must look like this
Request for quotation
==>Supplier Documents
Suppliers
Purcahse OrderHope i had explained my scenario clearly!! Appologise if i didnt explained properly!! -
Display a particular column only when certain criteria is satisfied
Hi Experts,
I have a requirement from a user with which i am struggling. The person wants to see an entire report but see a particular column only when certain criteria is satisfied. I am not talking about filtering the entire Query but just a certain column.
Ex.
Data in Cube
Req | Candidate | Candidate Status | Grade
1 | C01 | Draft | A
1 | C02 | Withdrawn | B
2 | C03 | Hired | B
3 | C04 | In Process | A
3 | C05 | Hired | C
Result in Query
Req | Candidate | Grade
1 | <Blank> | A
1 | <blank> | B
2 | C03 | B
3 | <blank> | A
3 | C05 | C
Basically, user wants to see candidate information only when Status is Hired. Rest of the time, it should be blank.
Is this possible ?Hi,
From My view this is not possible in Query.
You can do this in Backend or
You can create 2 Query
1.Query whith candidate name who is hired.
2.Query without candidate name whose status is not hired.
3.Merge these these report using Excel Macro.
Thanks and Regads,
MuraliManohar -
Display Community Names, only when Current User is a Member of that Community
Greetings,
I have a Community Site Collection(say ABC). Within that I have many Community Sub-sites(say X,Y,Z). I want to display the Community Sub-site Names in Community Home-page for the Condition,
When Current User name Exists in "Community Members".
1.For that i have to access "Community Members" list from all Sub-sites(say X,Y,Z) within Community Site Collection(say ABC).
2.Display Community Sub-sites Name Queried for Current-user Name Exists in "Member" Column of "Community Members" List
Is this the Correct Solution for my Requirement? Or any Best Practice available?
Thanks in Advance for helpThanks for your Reply
You mean I need to use Custom Webpart and Content Editor in my Community Homepage.
1.Custom Webpart for displaying all Subsites within SiteCollection and
2.Content Editor to hide Community name(By Using JavaScript)
I can display all Subsites within SiteCollection using Spweb.getsubwebsforcurrentUser()
But it seems complex to hide non-member community names. The reason is that for a particular user itself i need to filter out "Is this Current User Member of this Community?" for all Subsites
Any better Solution? Hope it would be
Thanks,
Vinnarasi -
Power View in SharePoint only shows current year.
I have a customer using the Power View add in for SharePoint 2013 based on SQL 2014. I have created a BISM object that connects directly to an OLAP cube.
When I build reports or Pivot tables against this object they work fine. However when I build dashboards in Power View they only show the current year's data
We do have a default date dimension which forces for some reason Power View to only display current year. Therefore the slider doesn’t work since it has only current year / date showing up.
After removing the date dimension in one of our dev. cubes, Power View showed all dates and we were even able to uses the date animation with slider worked fine.
We don't want to do this in production however, because many of our reports rely on the default date dimension.
Has anyone come across this or know a workaround?
SGI am going nuts! I had selected 'Analysis Services' instead of 'Microsoft BI Semantic Model for Power View'
-
Need to Display columns depending on the prompt selection
I need to show the only the columns as per the prompt selection given by the user.
Suppose there are 5 prompts say (first name, last name, phone number, address, DOJ). All the prompts should be optional. If the user gave input for first name and last name then only this two columns must be displayed in the report.Yes it is possible but you will have to write down formulas for these columns.
First add all required object in your report and format them in your report.
Now say you want Last name to appear when you user enters last name in prompt.
Write down following formula
Report Detail Area
=If(UserResponse("Last Name"))="USER INPUT" Then [LNAME]
For column Heading you can use
=If(UserResponse("Last Name"))="USER INPUT" Then "Column Heading"
The same pattern may be applied for other columns.
Regards,
Bashir Awan -
MI31, Include Previous Inventoried batches Flag, WHY only for current year
Hello All,
We are using MI31 to generate Physical Inventory documents and our need is to always generate PI for batches having Stock but Not to Generate PI for Batches which have Stock 0 and are already counted(posted) atleast Once.
Means if a batch has 0 stock today, we did an inventory count now and post successfully, Now for future we DON'T WANT TO COUNT THIS BATCH ANYMORE.
We though of achieving this by running MI31 two times, once for batches with non-zero stock and second time for batches with zero stock.
So, first time, with Flags "Only Mat without zero stock" and "Incl Batches subj to PhyInv", so that everytime PI is created.
Second time, with Flag "Only Mat with zero stock" and WITHOUT marking flag "Incl Batches subj to PhyInv", so that a new PI doc is created only if there is no doc created earlier for this batch. This is working well but only wrt to CURRENT YEAR. If there is a PI doc for this batch which is processed last year, then again a new doc is created if I run this year which is NOT NEEDED.
Is there any other customisation/setting/way to avoid these extra documents ?? We don't want to print PI this year for batches with zero stock which are already processed in 2010 (or earlier) and want to ignore them permanently.
I hope I am clear in my query.
Regards,
DiwakarThanks for the reply Jurgen.
Yes, Archiving is one option but not sure would be agreed, I will discuss the pros n cons for it.
if you dont want to count zero stock batches, then click the button "Acc.to Stock " in the middle of the selection screen and activate the box for only material without zero stock
This will NOT ensure that 0 stock batches are counted at least ONCE which is the requirement. Therefore I am thinking for running them separately.
Anyhow, it means there is NO solution to IGNORE 0 qty batches which are already counted atleast Once (in previous years) :(
Can you think of any other workaround to achieve the same (other than archiving) ?
I guess we can mark them deleted and then play with the deletion flag indicator in this program. -
Why is my ping so high in the first column only when i do a tracert?
When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
tracert www.yahoo.com
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [98.139.183.24]
over a maximum of 30 hops:
1 9 ms 3 ms 3 ms
2 1101 ms 34 ms 38 ms 193.sub-66-174-20.myvzw.com [66.174.20.193]
3 169 ms 55 ms 52 ms 49.sub-69-83-13.myvzw.com [69.83.13.49]
4 52 ms 56 ms 54 ms 194.sub-69-83-13.myvzw.com [69.83.13.194]
5 179 ms 58 ms 57 ms 101.sub-66-174-17.myvzw.com [66.174.17.101]
6 168 ms 57 ms 60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [152.179.2.97
7 181 ms 58 ms 57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [152.63.17.130]
8 170 ms 59 ms 58 ms 0.ae3.BR1.NYC1.ALTER.NET [152.63.18.222]
9 177 ms 67 ms 59 ms ae11.edge2.NewYork.Level3.net [4.68.62.41]
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 192 ms 49 ms 60 ms ae-4-90.edge4.NewYork1.Level3.net [4.69.155.210]
14 185 ms 51 ms 60 ms YAHOO-INC.edge4.NewYork1.Level3.net [4.28.130.82
15 380 ms 73 ms 129 ms ae-5.pat2.bfz.yahoo.com [216.115.96.67]
16 339 ms 69 ms 146 ms ae-4.msr2.bf1.yahoo.com [216.115.100.73]
17 215 ms 152 ms 80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [98.139.128.11
18 289 ms 217 ms 217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [98.139.128.47]
19 187 ms 87 ms 79 ms po-14.bas2-7-prd.bf1.yahoo.com [98.139.129.227]
20 474 ms 314 ms 294 ms ir2.fp.vip.bf1.yahoo.com [98.139.183.24]
Trace complete.hi there
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
http://www.dslreports.com/drtcp
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
http://www.dslreports.com/tweaks
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
good luck
ron
ps im not a vzw rep in any way other then a fellow customer not getting answers. -
Display workorder only related to vendor selected in Vendor name UDF
Hi ,
I am using SAP 2007 PL 18 ,
In a Goods Issue Form I am created two UDF 1) Vendor Name 2) Work Order Nos .
Here queries related Workorder No. Display workorder only related to particular vendor selected in Vendor name UDF .
Pl provide me FMS query.
Thanks
nitinHi Nitin,
My question is How you can know these Work orders are related to particular Vendor? Any relation is there between the Vendors and work orders?
Also what you calling as Work Orders? I think it is Purchase Order?
If it is PO, then try this
Select T0.DocNum from ORDR T0 where T0.CardCode = $[$OIGE.U_BPCode] and T0.Status = 'O'
The above query will show only the Open PO list. If you want all POs then remove the T0.Status condition.
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 11:13 AM -
Why doesn't the keyboard display lower case when this is selected?
Why doesn't the keyboard display lower case characters when these are selected?
The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.
-
I need to keep re-booting my laptop to resolve above bug. Ideas please?
ONE MONTH AND NO REPLY - WHO CAN ADDRESS THIS BUG????
WHEN I OPEN A .pdf document using ADOBE READER 11.0.2 BEHAVIOR is described BELOW. I CANNOT BE MORE COGENT.
It occurs both within Adobe Reader functions, such as page printing options, and in all APPLICATIONS (Gmail, Word, etc) once I close .pdf document.
SOLUTION: I MUST POWER DOWN/UP EACH TIME I USE ADOBE READER. THIS IS IDIOCY.
1. Keyboard appears RESET to display numbers ONLY, and numbers displayed to DO NOT CORRESPOND to numbers I TYPE.
AFTER ADOBE READER IS CLOSED I type "A" into say, an email address field and a random number, say, "9" appears in the field not an "A".
WHILE IN ADOBE READER I type "23" into the .pdf "go to page" field, and get other numbers completely.
Happens ONLY when I open a .pdf file with Adobe Reader 11.0.2 (XI).
Both behaviors occur whether I open a download .pdf file or attempt to open a .pdf via search engine Google + my Browsers.
2. Operating System = Windows 7.
3. My Browser = Internet Explorer 9 or Mozilla Foxfire; behavior is identical on either. Search engine used is Google.
Weird, but true, and tiresome. I've had it..
Message was edited by: SueB17 3/19/2013
Message was edited by: SueB17 -
Listing a join column only once in a select
Hi. Has there been any advancement in t-sql where I can continue to select * on tables a and b in a join but expect to get back only one occurrence of columns that r used in the join. Or do I still need to explicitly list all cols in the
query?
eg. select a.*,b.* from a inner join b on a.c = b.c
hoping there is some shorthand way to see c only once
Sorry, I would not refer your expectation with "advancement". Relational engine needs to identify each column separately in the query, user have capability to select required columns.
If you consider LEFT OUTER JOIN, how would it decide which column to display from LEFT or RIGHT table (because when the values do not match you will still have all the rows from LEFT table).
When you specify "*" it brings the entire result set. So you will have to do little work and select only the required column. :-)
If this post answers your query, please click "Mark As Answer" or "Vote as Helpful". -
Ttitle not displaying the title when no rows selected from a table
My requirement is display the Ttitle value even when there are no rows fetched from a table. I tried the following -it didn't work. We are on Oracle 9.2.0.7.0. Anybody has thoughts on this... your help greatly appreciated.
ORACLE_SID = [oracle] ? ABCDE
PSDEVDB1:>sqlplus babu
SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 10 17:56:52 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter password:
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SQL> ttitle center 'testing'
SQL> column x noprint
SQL> select 'x' x from dual;
testing
SQL> select *from mytable3;
testing
NAME NO
KUMAR 10
RAMU 10
BABU 10
SQL> select *from mytable3 where no=20;
no rows selected
SQL>If your concepts are clear for Right outer join, Left outer join and Full outer join you can achieve what you are looking for.
http://www.oreillynet.com/pub/a/network/2002/04/23/fulljoin.html
Play with the data and may the force be with you. -
External display jitters, only when I drag a window, or switch apps.
I just purchased a brand new HDTV, and hooked up my computer to it via HDMI. The picture looks great, high resolution and everything. The problem is that when I move a window on the display, all the lines/letters all jitter/vibrate a little bit, before becoming totally focused. It's only a fraction of a second, but it is very annoying/distracting.
I have Windows installed on a partition, and when I am running Windows, this does not happen.
Thanks,
~Brian~I just purchased a brand new HDTV, and hooked up my computer to it via HDMI. The picture looks great, high resolution and everything. The problem is that when I move a window on the display, all the lines/letters all jitter/vibrate a little bit, before becoming totally focused. It's only a fraction of a second, but it is very annoying/distracting.
I have Windows installed on a partition, and when I am running Windows, this does not happen.
Thanks,
~Brian~ -
Group by making difference in result when only when ID is selected.
The following query returns nothing since there is no data matching criteria in tables which looks good to me:
SELECT SUM (ci.premium_amt),'START PROGRAM'
FROM hr.group cg,
hr.request pi,
hr.rate ri,
hr.info cc,
hr.allocation ci,
hr.index fi
WHERE cg.product_id = 555
AND cg.r_id = 222
AND cg.product_id = pi.product_id
AND cg.r_id = pi.r_id
AND pi.product_id = ri.product_id
AND pi.r_id = ri.r_id
AND cg.group_id = cc.group_id
AND cc.cost_id = ci.cost_id
AND cc.index_id = fi.index_id
group by cg.product_id;
But when i remove the group by clause in the above query as follows:
SELECT SUM (ci.premium_amt),'START PROGRAM'
FROM hr.group cg,
hr.request pi,
hr.rate ri,
hr.info cc,
hr.allocation ci,
hr.index fi
WHERE cg.product_id = 555
AND cg.r_id = 222
AND cg.product_id = pi.product_id
AND cg.r_id = pi.r_id
AND pi.product_id = ri.product_id
AND pi.r_id = ri.r_id
AND cg.group_id = cc.group_id
AND cc.cost_id = ci.cost_id
AND cc.index_id = fi.index_id
I get output as:
(null) START PROGRAM
I was expecting output as nothing as that id does not exist.
Help is appreciated.user10857924 wrote:
since there are no rows produce, group by retrun nothing i.e. no rows to group by
where as when you apply aggregate function i.e. min/max etc without group it tends to produce atmost one rows even there is no row return
please look at below example hope this will clarify
with t(id, amt) as
select 1, 10 from dual union all
select 1, 10 from dual union all
select 2, 30 from dual
select sum(amt), 'Total'
from t where id=99
with t(id, amt) as
select 1, 10 from dual union all
select 1, 10 from dual union all
select 2, 30 from dual
select sum(amt), 'Total'
from t where id=99
group by id
Thanks
Edited by: user10857924 on Sep 21, 2010 3:35 PMI am getting the following error:
SQL> with t(id, amt) as
2 (
3 select 1, 10 from dual union all
4 select 1, 10 from dual union all
5 select 2, 30 from dual
6 )
7 select sum(amt), 'Total'
8 from t where id=99;
with t(id, amt) as
ERROR at line 1:
ORA-32033: unsupported column aliasing
Maybe you are looking for
-
How do you act upon a slave connection in Bluetooth??
I have a serial port bluetooth adapter which i tried to find using my bluetooth device/service discovery Midlet. I could find the device but no services, but it's suppose to broadcast a SPP service!! I know my midlet is OK because it can find SPP on
-
Firefox window has gone to a completely black/ opaque mix with no buttons or tabs.
Have reinstalled but the condition persists. Can't reset because no buttons. Help!
-
Condition type JEXP not picking in sales order
hi i was working with all configuration of TAXINN i am facing with a problem when i am running mine sales order i am not able to see condition type JEXP(BED) , JEAP (AED) can i now where i am gng wrong whereas i can see all the other condition in sal
-
Capturing Delta for Appending field in the extract structure
I have a issue for capturing the delta value. zzdelco is the field appended in the MC11VA0HDR and populating the data through user exit SELECT SINGLE DELCO FROM VBKD INTO L_DELCO WHERE VBELN = <FS_MC11VA0HDR>-VBELN " AND POSNR = '000000' . IF SY-SUB
-
Possibility to write Functional module in "end routines"
Hello guys, Can you please tell me whether we can write functional module in end routines or not??? If yes,then what is the procedure? Thanks in advance, Regards, Bunty.