Display currency button in FB03

Hi,
I am using FB03 for document display. But I am unable to see the display currency button where there is an option of displaying to different currencied like document, local and group. Please help. Other people can see that button bur when I run FB03 is somehow different and I can not see the document display button.
Regards,
Jeetu

hi,
i tried doing that but im not getting it.
please help.
i used what u said.
it_fcat-col_pos = 9.
it_fcat-fieldname = 'DISCAVAIL'.
it_fcat-cfieldname = 'WAERS'.
it_fcat-tabname = 'IT_FINAL'.
it_fcat-do_sum = 'X'.
it_fcat-seltext_m = 'DISC AVAILED'.
APPEND it_fcat.
this is the thing
Edited by: Poonam Naik on Jul 22, 2008 9:09 AM

Similar Messages

Change of display currency

Hi friends,
if you post a document using f-02 the amount can be posted in a document currency and it's automatically calculated in local currency.
If I simulate the posting and then using the button "display currency" the document currency is the same like local currency. Actually it should change the two currencies and display the different amounts.
Both currencies are maintained in OBBS and OB08.
Many thanks for your help.

Hi Nikilaus,
Actually the translation would take place and the option you are using will work only if.
1. The GL Control data specuify balance in local currency
2. The document currency is not a local currency.
In your case if the document and local currency is same there is no valustion and so the Local curr and document curr will remain same. it should never be different.
Hope this clears your doubt, any point?
Regards
Bharat

Display Currency symbol with value in ALV Report

Hi Experts,
I need to display currency symbol with value in ALV Report like if currency type is dollar then $200.
Here I am using field catalog type slis_t_fieldcat_alv and suing field merge catalog FM: 'REUSE_ALV_FIELDCATALOG_MERGE'
I tried like this
    IF <fs_fieldcat>-fieldname = 'STPRS'.
      <fs_fieldcat>-seltext_s = 'Std Cost '.
      <fs_fieldcat>-seltext_m = 'Std Cost'.
      <fs_fieldcat>-seltext_l = 'Std Cost '
       <fs_fieldcat>-tabname = 'MBEW'.
      <fs_fieldcat>-ctabname = 'T001'.
      <fs_fieldcat>-cfieldname ='WAERS'.
      <fs_fieldcat>-datatype = 'CURR'.
    ENDIF.
Please any one can suggest the solution for this.
Advance Thanks.
Regards,
Bala Achari

Hİ,
Check this link.
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=24379571
Take care.
Çağatay

How can I disable display/Change Button on transaction code VL03N

Dear Guru,
I found problem about transaction code vl03n because I define authorize for a user that can only display delivery document by transaction code VL03N. But this transaction have display/change button that when user click this button they can change delivery document. Please help me how can I solve this problem?
Best regard,
wipaporn

Wipaporn,
This should be done authorizations only. Although the button is displayed, is the user able to change and save the Delivery document?
Regards,
Ravi

How to display action buttons on iPad app?

Hi all,
I'm trying to display "action buttons" in my custom BO's TI in advanced list panes. For each of these table I created LayoutStackPanel where inside I have icon with defined event handler. In web UI version everything works fine. "Action button" appears and event handler is triggered on click.
When I open same TI on iPad, first of all Table is displayed as grid, not table, but I assume that is how iPad player generates that. But my created icon is not visible in specific row (I haven't allowed hover option as I thought iPad can't handle hover event), and even switching TI into edit mode it's not appearing and event handler isn't triggered.
I wonder if there is around some detailed guide, best practice doc which covers how we can design our screens for iPads.
Thanks,
Uldis

Hello Uldis,
Please try to follow these steps to create it from scratch. It guides you on how to create a Delete button, so you can use is as a reference for futher action buttons:
1. Drag and Drop ‘LayoutStackPanel’ from ToolBox to List Column.
2. Right Click on the column and Select Model ‘LayoutStackPanel’. Add an icon over there.
3. Set the property ‘Visible on Hover’ of Layout Control to True.
4. Create an action on your BO node called Delete<NodeName>. Generate the script file and add this snippet:
this.Delete();
5. Set the property ‘On Click’ in UI Designer.
Create EventHandler calling the BO action. The EventHandler and "Misc" name must contain "Remove" or "Delete" as prefix to identify as a deletion column. As sample you can check the "Account Team" facet of account Thing Inspector:
/BYD_COD/SalesOnDemand/Account/UI/COD_Account_TI.TI.uicomponent
Click on the "Items" collection as following figure shows:
Then set the Icon ‘OnClick' event to your delete event previously defined.
Let me know if that worked for you.
Best Regards,
Fernando Giroleti
Cloud Service Center AMEA

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

"Display Form" button not visible in UWL preview

Hi Friends,
We are implementing Travel module. The standard Workflow WS20000050 has a single level of approval. However, we wanted 2 level approval and so accordingly this was implemened.
Now we want a 3rd level of decision step to be approved by the traveldesk on recept of tickets.
Even the pdf form, which contains the travel details, needs to be visible. In the standard task TS20000118, the "Display Form" button is automatically visible in the UWL preview apart from the usual
"Approve" and "Reject" buttons.
However the content that needs to be shown to the traveldesk is different. To achieve this, i copied the standard task TS20000118 and changed only the task description. Rest everything including the parameters and binding remains same.
But for this task, the "Display Form" button is not visible.
1. Please advice on the possible reasons why this is happening ?
2. Is there any setting or any SPRO configuration wherin we need to
specify the tasks for whom the button needs to be displayed ?? or
Is it some portal side configuration ?
Thanks,
Shashank

Hi Vijay,
Goto:
Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
Upload this new configuration with HIgh priority.
Reregister the connector and clear the cache.
These steps solved my problem. Probably it should work for you too.
Regards,
Shashank

In reports, i want to display currency field out put with diff currencies

Hi all
in reports, i want to display currency field out put with different type of currencies like 1st record in rupees 2nd record in dolors 3rd record in
Euros. for this i should not use any tables and any currency fields and any functional modules. pls give replay urgently.

Hi swamy,
so sorry, but you have to use some of the objects you do not want to:
Currency values in ABAP are stored in currency fields (type CURR). If they are stored in structures or database, every CURR field must be connected to a CUKY field (currency key).
Displaying data using WRITE statement four output on a list is obsolete technique, you may use the use WRITE with the option CURRENCY c to format according to currency c in table TCURX.
SAP recommends to use ALV technique. If you use ALV to display structure data, then create a dictionary structure with currency value and currency key. The rest goes automatically.
Believe me: It is much easier and more reliable.
Regards,
Clemens

Display release button???

Hi there,
I bought an Ibook G4 3 months ago and I noticed that sometimes the display release button (button to press to open the ibook open) blocks inside... I then need to press at the extreme left or right for it to open. Is this a real problem with the display release button or is it normal(wear n tear)? Can I send it to the service center for warranty repair? It only happens sometimes.
Thanks

The problem with something that "only happens sometimes" is that if you send it in, Apple may not be able to replicate the problem. If they can't, it's a wasted trip.
If you haven't already bought AppleCare, I would recommend that you do so in case the problem becomes worse. AppleCare lets you call in on a problem like this for a full three years and if it needs fixed in those three years (not just for this, but for any problem — barring accidental damage or abuse), they will fix it.
http://discussions.apple.com/thread.jspa?messageID=610758

To Display Currency /Currency Symbol in Report

Hi All,
Business Requirement:
Want to see Actual and Headcount in same column along with currency.
currently we have separate column for headcount and Actual as below. (Actual and headcount will not come in same row.)
Company
Actual
Headcount
C1
$ 1000
C1
10
C2
$ 1000
C2
20
C3
$ 2000
C3
20
C4
$ 3000
C4
30
To display both in same column , I have used NOT function in formula and displayed the report as Below.
Company
Act&HC
C1
1000
C1
10
C2
1000
C2
20
C3
2000
C3
20
C4
3000
C4
30
I have calculated the above column using NODIM, so we are not getting $ symbol in report.
But business want that symbol to appear along with Actual value ($ 1000).
Please suggest if there is any way to do this.
Thanks,
Jaya

Hello Jay,
I think Koen Hesters is right. If you use you currency from your unit-dimension you will be able to get currencies in a separate column but not with the figures attached.
The only thing is that you will get # or not-assigned for the headcount values. If you are using BO tools on top of this BEx report then there is a chance to display currency also in the same column for the Actual values.
Here check the sample scenario which i tried to develop by looking at your data :
Kindly click on the screenshot to have a better view.
Output :
Regards,
Ashutosh Singh

Display the document currency instead display Currency in Report

Hi Experts,
I am having a query in support system, in that one characteristic called document currency is there under Unit Dimension and this Doc currency info object having the Display currency and Document currency as Variables. Document currency Info object is in Free characteristics without related variables (Disp.curr and Doc.curr)
When I execute the query defaultly Display currency will appear as a variable in selection screen, because customer exit(cmod) has created like that
Now user want to display the document currency instead Display currency in the report, may I know how can I solve this problem?
Here I am unable to get the customer exit detatils and which program is there in CMOD, can anyone suggest me, how I will get the details?
And one more requirement in this CR, that is user want to display the key figure amount in the report should be displayed with the document currency amount only
May I know, want to do any settings for this?
Thanks to All
Regards
Mrudula

Hi rajesh,
1.customer exit value you can change in CMOD,select your project and go to components and select EXIT_SAPLRRS0_001.there go to include zxrsru01,and change display variable to document currency variable.
2. if u want to display your key figure value in document currency ,,go to that key figure info object ,,,in currency ( reference) field give document currency info object.Then map the respective amount value again in transformation.load the data, now in report document currency will be displayed along with key figure amount.
Thank you,
Joseph

Display Currency Symbol disabled, but symbol prints if currency in a text formula. Why?

Our Crystal Report displays money fields (from our SQL database).
Our Crystal Reports Designer has the Display Currency Symbol feature disabled by default when writing reports.
On one report we have a Sell_Amount currency field to display:
We have this Sell_Amount field directly on the report in one section.
We also have this Sell_Amount field in a formula for printing in a different section. This formula is defined as a text field as it will either display 'No Charge' or the Sell_Amount based on a condition, such as: If {NoCharge} Then 'No Charge' Else ToText(Sell_Amount)
When viewing this report on our development machine in Crystal Designer, the Currency Symbol does not show for either the Sell_Amount field that is directly on the report or for the Sell_Amount that is in the formula (I am guessing because we have the Display Currency Symbol disabled).
When viewing on a runtime machine (no Designer, just runtime components), the formula (if NoCharge = False) displays the Sell_Amount (in the formula) WITH the currency symbol, but the Sell_Amount that is directly on the report (not in the formula) does not display the currency symbol. Why?
This has been an issue ever since were were on Crystal 8 way back when. We have never found (nor asked) for a reason, but now we need to know the reason/rules, etc. for this. We are currently on Crystal 2008 SP6 (Designer) and deploying Crystal Reports Developer for Microsoft Visual Studio SP6 runtime components. As I said, this has been an issue for years, but we now need an explanation. I have not been able to locate one on the site anywhere. Can you please explain the rules of Currency Symbol in this scenario?
Thank you.

Hi NB,
I did say to use the Advanced editor but I did not say to use it for attaching the report...
So to be clear here is what I see in the report Designer ( I put the formula into text boxes also ):
For the NoDatabaseCurrency field you have to set the currency to Fixed, Floating will add a space:
Which is opposite of what you originally posted:
"...Our Crystal Reports Designer has the Display Currency Symbol feature disabled by default..."
It's not disabled by default, please explain?
As for using the CCUR() function the help file does show the Currency symbol is on by default:
Examples
The following examples are applicable to both Basic and Crystal syntax:
CCur (200.20)
In Crystal syntax this is equivalent to writing $200.20. In Basic syntax, CCur (200.20) is the way to directly create a Currency value of 200.20.
CCur ("$200.20")
Returns the Currency value CCur (200.20) given the String value "$200.20".
CCur ("two hundred dollars")
Causes an error to occur. The CCur function cannot convert the String "two hundred dollars" to a Currency value.
So if you mean you went into the Options menu and Fields, Currency and check off this option:
[Update] - After testing this a few times it does retain the Options, current, Display Currency Symbol, so creating a new report the option is unchecked.
You are correct, even though I checked it off when I create a new report the option is checked on and obviously it's still on for each field and object. This may be a bug, testing more and checking with a few more people and eventually R&D.
So please clarify the steps you are doing?
Make sure you are running CR Designer under local PC Admin rights, right click on the short cut and select run as Administrator or check this option on:
Thanks
Don

Display Currency field in Ad Hoc Query

I done enhancment in Infotype 23 for Last Salary drawn as currency field and ref type as PA0015 WAERS in Ad Hoc Query. But I am not able to display the same field with value. Its always shows me blank. Is there any settings to be done to display currency field in ad hoc query?? Pl. help me as this is very urgent.

Hi Praveen,
i have selected both value and text, still i'm not getting it.

How to display currency values in indian format

hi all,
   When I am displaying Currency values as output , those are displaying in U.S. format (ie.1,234,000.00) , But I need to display those in Indian Rupee format (i.e 12,34,000.00).
Plz any one can help me that how to display this
thank you,
regards
Hanuma

Hi Hanuma kumar, please try this code.
REPORT ZAMOUNT_CONVERSION.
DATA : RESULT1(20).
PARAMETERS : NUM TYPE P DECIMALS 2.
DATA : num2 type STRING.
DATA : col_amt(20) type n,"15
         col_b type i,
         num_1(20) type C,"15
         Length type i.
num_1 = num.
write : 'default format      :',num.
uline.
skip.
IF ( num >= 999999999 ).
       write num_1 using edit mask 'RR__,__,__,__,______' to col_amt.
       CONDENSE col_amt.
       length = STRLEN( col_amt ).
       if length = 16.
         REPLACE first OCCURRENCE OF ',' in col_amt with space.
         write :/'amount indian format:',col_amt.
       else.
       write :/'amount indian format:',col_amt.
       endif.
ELSEIF NUM < 999999999 AND NUM >= 9999999.
       write num_1 using edit mask 'RR__,__,__,______' to col_amt.
       condense col_amt .
       length = STRLEN( COL_AMT ).
       if length = 13.
         REPLACE first OCCURRENCE OF ',' in col_amt with space.
         write :/'amount indian format:',col_amt.
       else.
         write :/'amount indian format:',col_amt.
      endif.
ELSEIF NUM < 9999999 AND NUM >= 99999.
       write num_1 using edit mask 'RR__,__,______' to col_amt.
       condense col_amt .
       length = STRLEN( COL_AMT ).
       write :/'amount indian format:',col_amt.
ELSEIF NUM < 99999.
   data : dumy(10) type c.
   dumy = num .
   CONDENSE dumy.
   length = STRLEN( dumy ).
     if length <= 6.
       write :/'amount indian format:',num.
       else.
       write num_1 using edit mask 'RR__,______' to col_amt.
       write :/'amount indian format:',col_amt.
      endif.
   ENDIF.
   uline.

Display Currency tab during General ledger view in T-Code F-53

Hi
When Iam making a payment in foreign currency using T-Code F-53, then on simulation of the document in the General Ledger View (Ctr+F12), Iam trying to press the tab 'Currency' (F9), however, it shows blank, there is no currency visible in it. However, when I press the same tab during Entry view simulation, it shows all the three currencies maintained.
Can anybody analyse the situation and tell me what can be the problem.
Regards
Abhishek Kumar

Hi,
If you have activated New GL then check in Financial Accounting Global settings (New) > Ledgers > Ledger >
Define currencies of Leading Ledger. Secondly, you have to check in FBZP, the payment method in country >
Currencies allowed - If you have not defined anything all the currencies will be taken. In F-53 when you
processing the transaction itself, you can see three currencies, i.e. local currency, group currency, and
hard currency translations. If you click display currency F8, the system will give a pop up for selection
based on document currency(by default), local currency, group currency and hard currency. Please check
and revert back.
Regards,
Sadashivan

Display currency button in FB03

Similar Messages

Maybe you are looking for