Display data (dropdown for years) in Team Calender

Hi,
Presently, in the dropdown menu of the Display data of team calender 3 years are populated "2007, 2008, 2009". Can anyone pelase let me know how to configure this to display dropdown to display till 2011?
regards,
pinki

Hi Siddharth,
Which code..can you please let me know that?
regards,
pinki

Similar Messages

Capture/Display Date & Time for Document Approval

Hi Gurus,
We are on SAP Enterprise Portals 7 SPS 15.
I have enabled Document Approval in one folder in a repository. The Document Approval works correctly; but I want to capture the date and time the document was approved at:
Option 1 (Preferred):
1. Click on "Details" from the "Context Menu" of the document.
2. Click on "Settings"=>"Approval" in the popup window.
Currently it only shows
<Step-Name> <Approver-Name> has approved
Desired:
<Step-Name> <Approver-Name> has approved on <Date-Time>
Option 2:
1. Approval Maintenance Report (under Content Management=>Reports=>Approval maintenance)
Your guidance is greatly appreciated and I promise points.
Thanks and regards,
Pratik
Edited by: Pratik Thakkar on Mar 19, 2009 9:42 AM

Hi,
Chk this [https://forums.sdn.sap.com/thread.jspa?messageID=115712]
Regards
Baby

Need to Display Data for Cummulated to Current Day of Current Fiscal Year

We use fiscal variant V3 (April-March). My need is to display data automatically from first of fiscal period (April 1 2006) to today.
I tried using 0CYTCD on Calendar Day but this works only for the current calendar year that the system is in i.e 2007.
Is there a standard variable I can use on 0CALDAY so I always get data from day one of current fiscal year/period to today? e.g. April 1, 2006 to January 3, 2007
If not, can someone please help with the exact customer exit code that I would need to write in CMOD in BW?
Thanks a ton!

I thought of using 0FYTCD variable, but I cannot find it in the business content.
Has anyone used 0FYTCD (Fiscal year to current day) in BW 3.1 SP25?
Again, I am looking for a variable that would get me the beginning of fiscal year to today.
Thanks.

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

Where does one manage date formats for display and input

the user specification is that dates be displayed as YYYY-MON-DD. Is there a config or properties file which contains the date format for display? Is there a calendar drop-down that can be positioned next to a date input field for a question on a screen?
Thanks,
Allan

Hi Allan,
Curious why the rule project wasn't created with "English (Canada)" initially? If your project is English (UK) with the default configurations for that locale, then I assume your currency values are appearing in OWD with the GBP symbol (£) instead of a dollar sign ($)?
As for the impact of switching… I highly recommend getting confirmation from the OPA Dev team before doing it, but in the meantime, if you wanted to experiment on your own with a separate test rulebase (as opposed to whatever formal rulebase you're working on), here are my observations from an initial look… (FYI, I'm an experienced OPA rulie, but I'm non-technical and not in the Dev team, so best to check with them!)
I poked around the language parser files and saw that English (UK) has an English (UK) verb list, whereas English (Canada) uses the English (US) verb list. The vast majority of verbs are identical in all the variations of English, however, there are a couple which differ. So if you've used any verbs which have a different spelling between the 2 lists, there may be some attribute text to tweak, e.g.
- English (UK): the person travelled to Australia
- English (US): the person traveled to Australia
- English (UK): the person cancelled the reservation
- English (US): the person canceled the reservation
I saw some other different files between English (Canada) vs English (UK), but didn't notice anything in them which I'd expect to impact the rulebase.
As for how it might impact other components:
* screens file and the properties file – May be some tweaking depending on how you addressed the verb spelling issue above.
* regression test files – May be some tweaking depending on how you addressed the verb spelling issue above.
* messages.(locale).properties – The default messages.(locale).properties file appears to be based on the Language setting of the Project. I just tested this and OWD used a different messages.(locale).properties file when I changed the Project Language (OPM | File menu | Project Properties | Common Properties | General | Language).
* Siebel Connector – don't know what the impact would be.
OPA Dev team – Can you review what I've said here? And add any relevant further detail?
Cheers,
Jasmine

No data read for fiscal year 2011

In ECC6, after posting document in FI, I wan to check balances with T-Code FS10N and Enter GL account in which document entry supposed to be recorded. But when I execute it getting message in Information window " NO data read for fiscal year 2011 (Long text)
what does it mean? Appreciated explanation

I did saved the entry and then got message, when I was trying to display document no?
error message "document no 200000003 sony does not exists in fiscal year 2011"
when I was trying to see display of GL account
Got message " NO data read for fiscal year 2011"
when I was trying to make document reversal of document no: 200000003
Got message "document no 200000003 sony does not exists in fiscal year 2011"
My document type is SA and reversal document type is Ab, No. range for this document is in fiscal year 2011.
I really confused where is my config. went wrong?
suggestion and expert opinion are expected and appreciated.

Need Help in finding FM for displaying date as output EX:april-07

Hi All,
I have a problem in displaying date for example:
If i give period as 4 and year as 2007,
the output should be displayed as april-07.
Can any one help me out in finding a solution.
Thanks in advance.

MONTH_NAMES_GET will give you the month name
FUNCTION MODULES
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
Rewards if useful...........
Minal
Message was edited by:
Minal Nampalliwar

Need FM for displaying date as output EX:april 07

Hi All,
I have a problem in displaying date for example:
If i give period as 3 and year as 2007,
the output should be displayed as april-07.
Can any one help me out in finding a solution.
Thanks in advance.

Hi,
Use the below logic.
data: it_months like t247 occurs 0 with header line.
data: v_text(20).
CALL FUNCTION 'MONTH_NAMES_GET'
EXPORTING
   LANGUAGE                    = SY-LANGU
TABLES
    MONTH_NAMES                 = it_months
EXCEPTIONS
   MONTH_NAMES_NOT_FOUND       = 1
   OTHERS                      = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
read table it_months with key mnr = sy-datum+4(2).
if sy-subrc = 0.
concatenate it_months-ltx '-' sy-datum+2(2) into v_text.
endif.
write:/5 v_text.

Display data per CALWEEK over two years

Good afternoon (in South Africa anyway)
We are still in 3.10 (BI 330)
Please assist. I created a Variable offset 0 to -12 on 0CWEEK. If I run the query, only data for CALWEEK's for 2008 are displayed. I restricted 0CALYEAR to both 2007 and 2008, but it did not change anything. How do I display the last 12 weeks (or in other cases 'Monhts') if the years refer to 2007 and 2008?
Your assistance will be highly appreciated. Have a good day.
Cj Faurie

Hi There
Thanks for your speedy response. Yes what you say is true.. regarding the fact that 200812 (CALWEEK) will only display info for 2008. But what confuses me is that the following is true:
(Filter area of query displays the following)
'Calendar Year/Week 2007/52..2008/12'
(Query Result Area displays)
'Calendar Year/Week
2008/01
2008/05
2008/09'
Why does Bex display "2007/52 ..... " in stead of 2008/01 when the variable entry is from 2008/12 and the offset 0 to -12?
Thanks
Cj Faurie

Display residual leave in team calender

Hi,
when clicking in the team calender on a certain absence details will be shown below.
The detail data does not include the residual leave although we have a screenshot where
the residual leave is shown.
Does anyone know how to make the residual leave to be displayed?
Thanks in advance!
Regards
Chris

Chris,
you may check these badis
PT_ABS_REQ
PT_GEN_REQ
Thanks
Bala Duvvuri

Display data as per the fiscal year

Hi All,
Need a suggestion with formula building:
I have 2 columns, date which is the start of a fiscal year (04/01) and total cost next to it.
I want to display only that fiscal year and a total cost which falls in current fiscal year. Please let me know how would i create a formula so it reads the system date and displays the fiscal year and cost according.
Here is a sample of data:
Date          Cost
04/01/2010     100$
04/01/2011     75$
So ideally my report should display only row 1 and when run after 04/01/11 ie after 2-3 days it should display row 2
Thanks!

Thanks for your response Shastry, but I am having trouble understanding it. Not sure how the above steps will read the current date.
To be more specific, I want to display only that cost that falls in fiscal year.
In above example now since it is 03/26/2011 and my fiscal year starts on 04/01 . I want to display cost from row 1 and when the same report will be run after 04/01/2011 it should display cost from row 2.
Like wise if the report is run after n number of years , it should display cost as per the fiscal year at that time.
So i guess the formula should really depend on system date/current date/ print date
Thanks!

Tooltip for h:selectOneMenu which uses f:selectItems to display data

I want to display a tooltip when a user mouseovers over every element in a dropdown.
I'm using h:selectOneMenu for displaying the dropdown
<h:selectOneMenu tabindex="4" id="dataList" valueChangeListener="#{DataBean.processDataSelection}" value="#{DataBean.dataSelected}" >
          <a4j:support event="onchange" reRender="dataPanel" ajaxSingle="true"/>
          <f:selectItems value="#{DataBean.dataList}" />
</h:selectOneMenu>
Can anyone give any solution?

There is no way with the Sun JSF Mojarra. Either implement your own Javascript solution (crawl the DOM and apply title the attribute on the options), or rise a featurerequest at the issuetracker of the Mojarra [development team|http://javaserverfaces.dev.java.net] that they should add the 'title' attribute to the f:selectItem tag and the javax.faces.model.SelectItem class.

Displaying data in one row for for 2 tables without relaiton

I Have 2 tables without any relation and there is a common field and i want to display data like below
table refdet
1)
refdt----------refbr----refamt----refcat
10-aug-09---10-----34234-----101a
10-aug-009--11----23245-----102a
1-AUG-09----10----455.98----104A
19-aug-09-12-----10000-------103B
2) brdet
trdt---------brn-----brtot-----------brcat
11-aug09--10-----454000-------A
09-aug-09-12-----550000-------B
30-sep-09--10-----430000------A
09-aug-09-11-----550000-------B
i want to display data for each branch refdet.refbr = brdet.brn
refdet
Br10
refdt----------refbr----refamt----refcat-----trdt---------brn-----brtot-----------brcat
10-aug-09---10-----34234-----101a-------11-aug09--10-----454000-------A
1-AUG-09----10----455.98----104A------30-sep-09--10-----430000------A
Br 11
10-aug-009--11----23245-----102a -------09-aug-09-11-----550000-------B
Br12
19-aug-09-12-----10000-------103B------09-aug-09----12-----550000-------B
i tried the following query but its not working
select distinct null as refdt,null as refbr,null as refamt,null as refcat,b.trdt,b.brn,b.brtot,b.brcat
from brdet a,refdet b
where a.refbr (+) = b.brn
union all
select distinct a.refdt,a.refbr,a.refamt,a.refcat,null as trdt,null as brn,null as brtot,null as brcat
from brdet a,refdet b
where a.refbr = b.brn (+)
its not giving the records on each row for both side its creating separte rows for each records in both table.
rgds
jytohi
-

Hi jytohi,
Please lean back for a moment and study your question. Ask yourself, is this a reasonable way to ask a question?
Jopefully you'll reach the answer, "No it isn't, I need to.."
1. Turn these
1)
refdt----------refbr----refamt----refcat
2) brdet
trdt---------brn-----brtot-----------brcatinto CREATE TABLE statements.
2. Turn these
10-aug-09---10-----34234-----101a
10-aug-009--11----23245-----102a
1-AUG-09----10----455.98----104A
19-aug-09-12-----10000-------103B
11-aug09--10-----454000-------A
09-aug-09-12-----550000-------B
30-sep-09--10-----430000------A
09-aug-09-11-----550000-------Binto INSERT INTO statements
3. Turn this
refdet
Br10
refdt----------refbr----refamt----refcat-----trdt---------brn-----brtot-----------brcat
10-aug-09---10-----34234-----101a-------11-aug09--10-----454000-------A
1-AUG-09----10----455.98----104A------30-sep-09--10-----430000------A
Br 11
10-aug-009--11----23245-----102a -------09-aug-09-11-----550000-------B
Br12
19-aug-09-12-----10000-------103B------09-aug-09----12-----550000-------Binto properly formatted expected output, along with a reasonable explanation of why
4. Turn this
select distinct null as refdt,null as refbr,null as refamt,null as refcat,b.trdt,b.brn,b.brtot,b.brcat
from brdet a,refdet b
where a.refbr (+) = b.brn
union all
select distinct a.refdt,a.refbr,a.refamt,a.refcat,null as trdt,null as brn,null as brtot,null as brcat
from brdet a,refdet b
where a.refbr = b.brn (+)into a properly formatted query
And last, put everything in into curly brackets {noformat}{noformat} to preserve formatting and blank space.
Best regards
Peter

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Display data (dropdown for years) in Team Calender

Similar Messages

Maybe you are looking for